Author Topic: [ALL SHIPPED] PHANSI150 Plates - Stainless Steel - SOLD OUT (Read 25540 times)

SmallFry · « **Reply #100 on:** Thu, 06 December 2012, 11:45:28 »

Quote from: jdcarpe on Thu, 06 December 2012, 11:31:25

Quote from: SmallFry on Thu, 06 December 2012, 11:24:38
That died off when the GH60 was picking up speed...

Yep. But I think we need both, Phantom and GH60. The only real improvements to the Phantom I could justify would be revising the PCB for SMD diodes and an integrated ATmega controller chip, like komar did with the GH60. Maybe holes for PCB mount switches and stabilizers.

Agreed, but I think we all constitute as thread crappers, at the moment. Lets get to a different topic...

jdcarpe · « **Reply #101 on:** Thu, 06 December 2012, 11:47:07 »

Hopefully, Dan won't mind. Maybe he will sell the rest of his plates.

DanGWanG · « **Reply #102 on:** Thu, 06 December 2012, 11:48:30 »

I'd like to keep any technical discussions out of this thread only because they're more useful somewhere else. I've never minded thread crapping, so that's not the issue =)

SmallFry · « **Reply #103 on:** Thu, 06 December 2012, 11:49:19 »

* SmallFry lets the VTEC kick in this thread.

Threadcrap complete.

jdcarpe · « **Reply #104 on:** Thu, 06 December 2012, 11:52:37 »

Maybe once bavman has more info from litster, et al., he can start an IC thread in the Group Buys subforum, where we can discuss these technical issues.

DanGWanG · « **Reply #105 on:** Thu, 06 December 2012, 13:33:53 »

Warning: Potato cam. I had to build my own boxes, wrapped in bubble wrap then rewrapped in brown paper. All packages will be marked 'FRAGILE' also, so hopefully it arrives safely to everyone.

The following orders going out today: jdcarpe, SmallFry, frukstund (customs tracking later today), Acetrak (to Prof), mysterkawa, metalliqaz

fruktstund · « **Reply #106 on:** Thu, 06 December 2012, 13:36:58 »

Woohoo, soon! \o/

SmallFry · « **Reply #107 on:** Thu, 06 December 2012, 13:37:17 »

Thanks Dan!

DanGWanG · « **Reply #108 on:** Thu, 06 December 2012, 15:51:04 »

All packages have been dropped off at the post office, so people should start getting them hopefully this Saturday. Everyone should have received their tracking number (via Paypal email or PM), but if you didn't, please PM me.

Outstanding invoices: boost (Friday), rknize, esoomenona and bavman (just sent invoice). If you guys can pay me before 10:00am CT tomorrow morning, it'll be in the mail tomorrow.

rknize · « **Reply #109 on:** Thu, 06 December 2012, 16:18:56 »

WhiteFireDragon · « **Reply #110 on:** Thu, 06 December 2012, 20:42:29 »

Wow you even custom wrapped and packaged them. I would have just thrown them in a medium flat rate box with some newspaper...

DanGWanG · « **Reply #111 on:** Thu, 06 December 2012, 21:07:04 »

$6 shipping versus $11 :/

The_Beast · « **Reply #112 on:** Thu, 06 December 2012, 21:08:11 »

Too bad you can't cut some kind of backing material like MDF. However these plates are damn strong and may not require it.

esoomenona · « **Reply #113 on:** Fri, 07 December 2012, 08:47:13 »

Hey, Dan. Can I add a second plate and get reinvoiced? I am CONUS, btw. I'll send payment for that right after. Thanks a lot!

DanGWanG · « **Reply #114 on:** Fri, 07 December 2012, 10:29:22 »

Quote from: esoomenona on Fri, 07 December 2012, 08:47:13

Hey, Dan. Can I add a second plate and get reinvoiced? I am CONUS, btw. I'll send payment for that right after. Thanks a lot!

You sure can. I'll send you a new invoice =)

DanGWanG · « **Reply #115 on:** Fri, 07 December 2012, 13:30:27 »

With the GMK thread and my RL work and responsibilities, I'm hoping to get all the paid orders shipped out today. Gotta get on building some boxes! Updated OP.

DanGWanG · « **Reply #116 on:** Fri, 07 December 2012, 15:25:41 »

esoomenona, duq and rknize packages going out today.

Outstanding invoices: boost, hoggy and bavman

SmallFry · « **Reply #117 on:** Sat, 08 December 2012, 20:06:47 »

Got mine today! Very VERY well packaged. Thank you Dan! Got a 7bit plate to make into a lubing station and a GH key that was a nice little something to sweeten it all.

Thanks again Dan!

DanGWanG · « **Reply #118 on:** Mon, 10 December 2012, 10:43:58 »

Glad it arrived safely Nate dawG. Hoping the same for everyone else...

Everyone has paid so those will be going out today.

Only 4-6 left!

jdcarpe · « **Reply #119 on:** Mon, 10 December 2012, 12:26:43 »

I received my plates today. Nice packaging! They have quite a few burrs from the cutting process, but some careful attention with a flat needle file took care of those. I also performed the stabilizer pin mod per WFD. And sanded with 80 grit sandpaper. Looking great now! I think one of these is going to get a coat of paint before installation. Thanks for getting these for us, Dan.

boost · « **Reply #120 on:** Mon, 10 December 2012, 12:29:45 »

My plate should be here today, now I need a phantom!!!

jdcarpe · « **Reply #121 on:** Mon, 10 December 2012, 12:36:53 »

Gogo Phantom PCB round 2!

DanGWanG · « **Reply #122 on:** Mon, 10 December 2012, 12:40:17 »

Any word on that yet? I'm sure people would be buying up my plates if that went through =)

SmallFry · « **Reply #123 on:** Mon, 10 December 2012, 12:54:04 »

I have one of each already! HEHE!

esoomenona · « **Reply #124 on:** Mon, 10 December 2012, 17:26:11 »

* esoomenona needs more Phantoms.

rknize · « **Reply #125 on:** Mon, 10 December 2012, 17:30:38 »

Got mine today. It's quite solid. Thanks!

DanGWanG · « **Reply #126 on:** Mon, 10 December 2012, 19:18:01 »

Good to hear they're arriving undamaged =)

esoomenona · « **Reply #127 on:** Mon, 10 December 2012, 19:24:13 »

Mine were in the process of being delivered, but I wasn't home... I won't be able to pick them up until Friday or Saturday.

metalliqaz · « **Reply #128 on:** Mon, 10 December 2012, 22:50:04 »

Mine was undamaged too

duq · « **Reply #129 on:** Mon, 10 December 2012, 23:14:40 »

Package arrived unscathed. Packaging did its job. Thanks Dan!

Now lets get the round 2 phantom PCB going!

DanGWanG · « **Reply #130 on:** Mon, 10 December 2012, 23:21:03 »

Couldn't get out the plates today for hoggy and bavman. Tomorrow's a really busy day for me, but I'm hoping I can make it to the post office before they close. Sorry bros.

SmallFry · « **Reply #131 on:** Mon, 10 December 2012, 23:21:26 »

Quote from: esoomenona on Mon, 10 December 2012, 19:24:13

Mine were in the process of being delivered, but I wasn't home... I won't be able to pick them up until Friday or Saturday.

They shoved mine in my mail box, which is fine, just odd that they didn't drop yours off in your mail box Moose.

esoomenona · « **Reply #132 on:** Mon, 10 December 2012, 23:26:11 »

Quote from: SmallFry on Mon, 10 December 2012, 23:21:26

Quote from: esoomenona on Mon, 10 December 2012, 19:24:13
Mine were in the process of being delivered, but I wasn't home... I won't be able to pick them up until Friday or Saturday.
They shoved mine in my mail box, which is fine, just odd that they didn't drop yours off in your mail box Moose.

It's not too big of a deal for me, really. I have something else on the way too, which definitely won't fit in there, so I'll hopefully be able to pick them both up then.

bavman · « **Reply #133 on:** Mon, 10 December 2012, 23:26:42 »

Quote from: SmallFry on Mon, 10 December 2012, 23:21:26

Quote from: esoomenona on Mon, 10 December 2012, 19:24:13
Mine were in the process of being delivered, but I wasn't home... I won't be able to pick them up until Friday or Saturday.
They shoved mine in my mail box, which is fine, just odd that they didn't drop yours off in your mail box Moose.

You probably just have a bigger mailbox....

please abstain from using this post to make sexual innuendos

alaricljs · « **Reply #134 on:** Mon, 10 December 2012, 23:32:27 »

I can fit my arm up past my elbow into my mailbox. Unfortunately UPS takes advantage of this and abuses federal law. What can brown do for you?

metalliqaz · « **Reply #135 on:** Mon, 10 December 2012, 23:38:28 »

yup. he went there.

alaricljs · « **Reply #136 on:** Tue, 11 December 2012, 07:50:26 »

Never back down from a challenge.

Only 4-6 plates left depending on how you count... someone with a distinct case of boredom could PtP wire up a keyboard on these things.

fruktstund · « **Reply #137 on:** Tue, 11 December 2012, 07:59:28 »

Mine arrived to day. Seems like a very nice plate! :> Thanks Dan!

It looks a little bent though, so I put a couple of (heavy) books on it. Should probably do the trick.

metalliqaz · « **Reply #138 on:** Tue, 11 December 2012, 08:33:25 »

Mine had various metal 'nips' on it that will have to be sanded off before it can be used.

boost · « **Reply #139 on:** Tue, 11 December 2012, 08:39:56 »

Got my plate yesterday and this thing looks great!! The only down side is I don't own a phantom

Acetrak · « **Reply #140 on:** Tue, 11 December 2012, 08:52:15 »

Time to get a GB going?

(With a case too I hope)

jdcarpe · « **Reply #141 on:** Tue, 11 December 2012, 09:06:21 »

Case later. Need PCB!

DanGWanG · « **Reply #142 on:** Tue, 11 December 2012, 09:32:25 »

Quote from: fruktstund on Tue, 11 December 2012, 07:59:28

Mine arrived to day. Seems like a very nice plate! :> Thanks Dan!

It looks a little bent though, so I put a couple of (heavy) books on it. Should probably do the trick.

Wow, that was fast....

Yeah, likely it got warped during transportation. I tried to flatten them out as much as I could before sending them out =/

fl0w3n · « **Reply #143 on:** Tue, 11 December 2012, 12:34:21 »

Quote from: alaricljs on Wed, 05 December 2012, 14:38:18

Not as easily as just swapping out the plate. Would require PCB modifications and modifications to the plate.

Why PCB modifications?

I'd love to have a thick stainless steel plate in my Filco...I've got some tools to mod the plate, but not the PCB.

The_Beast · « **Reply #144 on:** Tue, 11 December 2012, 12:36:37 »

Quote from: fl0w3n on Tue, 11 December 2012, 12:34:21

Quote from: alaricljs on Wed, 05 December 2012, 14:38:18
Not as easily as just swapping out the plate. Would require PCB modifications and modifications to the plate.

Why PCB modifications?

I'd love to have a thick stainless steel plate in my Filco...I've got some tools to mod the plate, but not the PCB.

Bottom row of this plate is 1.5 1 1.5 7 1.5 1 1.5, where the Filco is 1.25 1.25 1.25 6.25 1.25 1.25 1.25 1.25

fl0w3n · « **Reply #145 on:** Tue, 11 December 2012, 12:40:47 »

Oh, so I suppose that's what the 150 part of PHANSI150 means, as apposed to the PHANSI125 plate (I'd assume that's what it's called?)

fruktstund · « **Reply #146 on:** Tue, 11 December 2012, 12:55:10 »

Quote from: DanGWanG on Tue, 11 December 2012, 09:32:25

Quote from: fruktstund on Tue, 11 December 2012, 07:59:28
Mine arrived to day. Seems like a very nice plate! :> Thanks Dan!

It looks a little bent though, so I put a couple of (heavy) books on it. Should probably do the trick.

Wow, that was fast....

Yeah, likely it got warped during transportation. I tried to flatten them out as much as I could before sending them out =/

Yeah, five days must be some kind of record. I'm quite amazed since the postal service has had a lot of problems during the last week due to massive amounts of snow. On top of that I live out in the countryside where they don't even bother to deliver my mail at times.

No biggie, I think it would work as it is now, but I'll straighten it out to avoid any mistakes. Then I'll just have to sand or dremel those stabilizer mount corners away. Will be interesting.

jdcarpe · « **Reply #147 on:** Tue, 11 December 2012, 12:56:11 »

Quote from: fl0w3n on Tue, 11 December 2012, 12:40:47

Oh, so I suppose that's what the 150 part of PHANSI150 means, as apposed to the PHANSI125 plate (I'd assume that's what it's called?)

Yes, exactly. The_Beast could have a PHANSI125 plate made for you during the mixed bag plate GB, if you ask him for it.

fl0w3n · « **Reply #148 on:** Tue, 11 December 2012, 12:59:25 »

Out of stainless or alum? I suppose that's a question for him lol.

I'm waiting on my plate from WFD, but if I can get a stainless one too, I'd like to compare.

Acetrak · « **Reply #149 on:** Tue, 11 December 2012, 13:03:36 »

I think it is also referred to as PHANSIWIN, that's what the DT wiki says at least

News:

Author Topic: [ALL SHIPPED] PHANSI150 Plates - Stainless Steel - SOLD OUT (Read 25540 times)