Author Topic: cchan clearing out her cupboards (Wacom Graphire4) (Read 5150 times)

cchan · « **on:** Sun, 17 February 2013, 17:31:29 »

So I've decided to focus my collection more on compact size keyboards because I have a small desk and lots of monitors now.

Wacom Graphire4 Blue - $20 (PRICE REDUCED) - Works just fine but tablet/stylus only because I can't find the mouse. It might come with an accessory pack of replacement nibs if I can find that.

Cherry MX11900 - PENDING - $25 - MX blacks, 'putty' colour, PS/2, lasered keys, has F keys off a lasered MY8000 board and a red double-shot Geekhack esc. Also, missing some screws on the bottom. F2, F4, F10, F12, and X don't work.

Cherry MX8113 - SOLD - $30 - MX browns, black, PS/2 curlycord, double-shots, missing one lens off a relegandable key. The strain relief on the cord is broken, but it's okay if you run the cord through one of the side channels.

Dell AT101W - SOLD - $10 - black complicated ALPS, PS/2, lasered keys, just a couple scratches. Never could get the hang of black ALPS.

Laser - $20 - white clicky SMK switches, AT curlycord with PS/2 adapter, double-shots. ~~Has intermittent hysterisis issues on a few keys.~~ Spurious failure. Works fine on a Ziotek PS/2 to USB converter.

I take paypal and ship only within CONUS at cost.

jabar · « **Reply #1 on:** Sun, 17 February 2013, 17:39:15 »

Might be interested in the Cherry MX8113... that's the one with the trackpad built in? How worn are the doubleshots (I guess I can wait til pics are available)?

Also any idea on CONUS shipping?

e: like to call dibs until some photos come up if that's ok!

calavera · « **Reply #2 on:** Sun, 17 February 2013, 17:49:40 »

Interested in the Dell 101W. Awaiting pics.

metalliqaz · « **Reply #3 on:** Sun, 17 February 2013, 17:56:52 »

inteli722 · « **Reply #4 on:** Sun, 17 February 2013, 18:27:44 »

quite interested in the 11900 and the 8113

rootwyrm · « **Reply #5 on:** Mon, 18 February 2013, 22:31:53 »

Which keys suffering hysterisis on the Laser? Are they the all-caps-everything double shots of absurd thickness?
You may interpret this as a tentative dibs, yes. ^^

remedyhalopc · « **Reply #6 on:** Mon, 18 February 2013, 23:03:14 »

I'd be interested in the 11900 as well!

cchan · « **Reply #7 on:** Tue, 19 February 2013, 15:03:56 »

Lots of pictures posted! Also, answering everyone's questions: (was going to do this yesterday but ended up being ill and taking a long nap instead)

Quote from: jabar on Sun, 17 February 2013, 17:39:15

Might be interested in the Cherry MX8113... that's the one with the trackpad built in? How worn are the doubleshots (I guess I can wait til pics are available)?

Also any idea on CONUS shipping?

e: like to call dibs until some photos come up if that's ok!

Yep, it's the big one with inbuilt magnetic stripe reader and trackpad. There's a light/moderate amount of shine -- refer to the photos. I'm guessing $12 shipping if you don't mind UPS Ground.

Quote from: calavera on Sun, 17 February 2013, 17:49:40

Interested in the Dell 101W. Awaiting pics.

Posted!

Quote from: inteli722 on Sun, 17 February 2013, 18:27:44

quite interested in the 11900 and the 8113

Looks like you are the first to post or PM about the 11900, but there are a couple people ahead of you for 8113.

Quote from: rootwyrm on Mon, 18 February 2013, 22:31:53

Which keys suffering hysterisis on the Laser? Are they the all-caps-everything double shots of absurd thickness?
You may interpret this as a tentative dibs, yes. ^^

Yep, they are the all-caps double shots, I'd say they are just a hair thicker than Cherry double shots.
e: Also, not sure which keys are suffering hysteresis, I will test it out though.

Quote from: remedyhalopc on Mon, 18 February 2013, 23:03:14

I'd be interested in the 11900 as well!

Looks like you are third in line based on my PM/post timestamps.

inteli722 · « **Reply #8 on:** Tue, 19 February 2013, 16:41:40 »

I'll happily take the 11900 off your hands, especially because of the price!

jabar · « **Reply #9 on:** Tue, 19 February 2013, 16:42:00 »

Looks fine for a work keyboard replacement... I'll take the 8113.

calavera · « **Reply #10 on:** Tue, 19 February 2013, 16:47:56 »

I'll take the Dell 101

Binge · « **Reply #11 on:** Tue, 19 February 2013, 16:56:25 »

Cherry MX11900 at an amazing price!

Your collection will be truly lighter.

terrpn · « **Reply #12 on:** Tue, 19 February 2013, 17:22:56 »

CPTBadAss · « **Reply #13 on:** Tue, 19 February 2013, 19:30:03 »

YGPM!

SmallFry · « **Reply #14 on:** Tue, 19 February 2013, 19:31:24 »

Oh, I didn't realize you had a Ricercar SPOS! Cool!

inteli722 · « **Reply #15 on:** Tue, 19 February 2013, 20:27:41 »

PM'd

cchan · « **Reply #16 on:** Wed, 20 February 2013, 07:10:57 »

Quote from: SmallFry on Tue, 19 February 2013, 19:31:24

Oh, I didn't realize you had a Ricercar SPOS! Cool!

I don't actually, the ricercar SPOS has a stripe reader but no touchpad. (Also, there's nothing 'small' about the 8113 lol)

deltr · « **Reply #17 on:** Wed, 20 February 2013, 08:06:28 »

I'll take the Cherry MX8113 if it becomes available!

SmallFry · « **Reply #18 on:** Wed, 20 February 2013, 09:11:24 »

Quote from: cchan on Wed, 20 February 2013, 07:10:57

Quote from: SmallFry on Tue, 19 February 2013, 19:31:24
Oh, I didn't realize you had a Ricercar SPOS! Cool!
I don't actually, the ricercar SPOS has a stripe reader but no touchpad. (Also, there's nothing 'small' about the 8113 lol)

Oh,whoops...

cchan · « **Reply #19 on:** Thu, 21 February 2013, 00:02:44 »

Quote from: cchan on Tue, 19 February 2013, 15:03:56

Quote from: rootwyrm on Mon, 18 February 2013, 22:31:53
Which keys suffering hysterisis on the Laser? Are they the all-caps-everything double shots of absurd thickness?
You may interpret this as a tentative dibs, yes. ^^

Yep, they are the all-caps double shots, I'd say they are just a hair thicker than Cherry double shots.
e: Also, not sure which keys are suffering hysteresis, I will test it out though.

I've tested the Laser board tonight a bit, in fact I'm typing on it now, and I haven't noticed any hysteresis issues. Perhaps double keystrokes were caused by a dodgy PS/2 to USB adapter.

e: I have a lab report to type up in LaTeX tomorrow, so I will give it more exercise, but I'm not anticipating any problems.

inteli722 · « **Reply #20 on:** Thu, 21 February 2013, 12:02:42 »

Just curious, how old is the 11900? It's not going to change my mind, but It would be interesting to know.

cchan · « **Reply #21 on:** Thu, 21 February 2013, 14:04:43 »

Quote from: inteli722 on Thu, 21 February 2013, 12:02:42

Just curious, how old is the 11900? It's not going to change my mind, but It would be interesting to know.

Not sure, I dont see a date code on the bottom. But it has the pre-WinXP style Windows keys. Also, I discovered that it's missing several of its screws.

As far as the Laser, I just used it to type my lab report today and it looks like everything works fine. I am going to assume that the hysteresis issues were due to a PS/2 to USB converter that wasn't working properly.

terrpn · « **Reply #22 on:** Thu, 21 February 2013, 14:19:33 »

i still don't have any issues with it (laser)

thought you had already sold it

cchan · « **Reply #23 on:** Thu, 21 February 2013, 16:33:20 »

Quote from: terrpn on Thu, 21 February 2013, 14:19:33

i still don't have any issues with it (laser)

thought you had already sold it

Yep, the Laser board is pending to RootWyrm. I was just testing its functionality because he asked about the hysteresis issue.

e: Damn it! Update on the MX11900 in OP. I took all the boards out to key test them, and on the 11900 F2, F4, F10, F12, and X don't work.

inteli722 · « **Reply #24 on:** Thu, 21 February 2013, 17:45:16 »

the X doesn't work?

huh. Using a PS/2 adapter or straight into a PS/2 connector?

EDIT: Would you mind posting pics of the PCB? It may be that or just a bad switch.

cchan · « **Reply #25 on:** Thu, 21 February 2013, 22:53:39 »

Here's the PCB photo

inteli722 · « **Reply #26 on:** Fri, 22 February 2013, 06:19:39 »

thanks.

cchan · « **Reply #27 on:** Sun, 24 February 2013, 17:59:43 »

Update: Laser keyboard is now no longer pending. I don't remember who was next in line though -- I will check when I get back to my Linux box.

rootwyrm · « **Reply #28 on:** Sun, 24 February 2013, 22:57:57 »

Quote from: cchan on Sun, 24 February 2013, 17:59:43

Update: Laser keyboard is now no longer pending. I don't remember who was next in line though -- I will check when I get back to my Linux box.

Yup.. unexpected (massive) expenses are teh suck.

And I has a sad - these really are truly wonderful examples of genuine SMK's and I miss having one. And you are just not going to find one in nicer shape anywhere you look.

jabar · « **Reply #29 on:** Sat, 02 March 2013, 19:44:08 »

The G80-8113 is an amazing keyboard. I also was surprised to find something special under the Caps Lock! Thank you again for the sale cchan!

inteli722 · « **Reply #30 on:** Sat, 02 March 2013, 21:11:29 »

Quote from: jabar on Sat, 02 March 2013, 19:44:08

...find something special under the Caps Lock!

Pics or it didn't happen.

cchan · « **Reply #31 on:** Sun, 03 March 2013, 11:31:03 »

Thanks for the feedback jabar! Was this the keyboard that I modded the Caps Lock switch with an extra heavy spring?

jabar · « **Reply #32 on:** Sun, 03 March 2013, 11:59:30 »

Quote from: cchan on Sun, 03 March 2013, 11:31:03

Thanks for the feedback jabar! Was this the keyboard that I modded the Caps Lock switch with an extra heavy spring?

Oh, you did the mod? I thought the (presumably) Super Black might have come standard.

Either way it was a cool surprise when I was considering doing a software remap of Caps and LCtrl.

News:

Author Topic: cchan clearing out her cupboards (Wacom Graphire4) (Read 5150 times)