Author Topic: [FS] Tesoro M7 LED keyboard (Read 108402 times)

Jocelyn · « **Reply #650 on:** Tue, 21 May 2013, 04:41:39 »

Quote from: nubbinator on Tue, 21 May 2013, 04:37:31

I used my Clears, not Reds. They actually started having noticeable compression at around 40g and appeared to hit the bump at around 50-55g. Just to overcome the bump and spring, they had to have 65g on them. I tried with a Red I have, but couldn't tell when I hit the point of actuation. I saw it compressing, but couldn't tell when I compressed enough to actuate. They did seem to bottom out somewhere around 65-75g on the Red though.

And I didn't use double shots or a PBT, I used this sucker since it's nice and flat:

Show Image

I'm guessing it's about a gram, maybe a little less.

Oh right, I forgot you don't have any boards that allow for switch top removal. That makes things tough imo.

Wraul · « **Reply #651 on:** Tue, 21 May 2013, 10:22:42 »

My springs has arrived safely.
Thank you calavera

Paranoid · « **Reply #652 on:** Tue, 21 May 2013, 12:17:58 »

I received mine as well. That was really fast! Thanks for the opportunity calavera

isman · « **Reply #653 on:** Tue, 21 May 2013, 13:23:19 »

Received mine today, thank you very much

calavera · « **Reply #654 on:** Tue, 21 May 2013, 16:47:59 »

Glad to hear some of you international guys got your orders so quick.

Kabuks · « **Reply #655 on:** Tue, 21 May 2013, 16:49:53 »

Got my springs.

Sputnik · « **Reply #656 on:** Wed, 22 May 2013, 07:24:04 »

mine arrived today, super service
THANKS CALAVERA

cyberwave · « **Reply #657 on:** Wed, 22 May 2013, 07:25:48 »

received dem springs!

super fast delivery given that the datestamp was 14 May

NthTier · « **Reply #658 on:** Wed, 22 May 2013, 15:26:39 »

Just got the mimic cable in the mail and it is better than I imagined. Amazing work put into it.

calavera · « **Reply #659 on:** Thu, 23 May 2013, 00:03:45 »

FC660 gone.

MJ45 · « **Reply #660 on:** Thu, 23 May 2013, 08:48:32 »

I would like a set (100) of 55g springs if some are still availible. Thanks, MJ

ksm123 · « **Reply #661 on:** Thu, 23 May 2013, 13:11:28 »

I received mine springs today, THANK YOU.

calavera · « **Reply #662 on:** Thu, 23 May 2013, 22:24:35 »

Awesome. Please post here when you receive your springs.

csimi · « **Reply #663 on:** Fri, 24 May 2013, 00:12:13 »

Got my springs. Thanks.

calavera · « **Reply #664 on:** Fri, 24 May 2013, 02:37:27 »

surpassed 15k views. yay.

added tesoro board.

pasph · « **Reply #665 on:** Fri, 24 May 2013, 04:27:44 »

Springs received, thanks

calavera · « **Reply #666 on:** Fri, 24 May 2013, 19:43:50 »

Added imsto dye subs.

Again, please post here if you received your springs so I can mark it off.

n0rvig · « **Reply #667 on:** Sat, 25 May 2013, 00:12:42 »

Springs arrived today, or maybe last week, but I finally remembered to check the mailbox today.

Thanks!!

F u r u y á · « **Reply #668 on:** Sat, 25 May 2013, 02:44:29 »

Mine is under the possession of jdcarpe now, he might (or already did) tell you when he gets it.

calavera · « **Reply #669 on:** Sat, 25 May 2013, 19:35:27 »

Yeah I marked yours off as well.

fydo · « **Reply #670 on:** Sat, 25 May 2013, 21:14:12 »

Just got my springs yesterday! Thanks again.

calavera · « **Reply #671 on:** Sun, 26 May 2013, 20:49:43 »

Cool. Looks like most of you got it by now. Anyone not receive theirs yet?

calavera · « **Reply #672 on:** Tue, 28 May 2013, 00:56:14 »

Price drops.

remmeh · « **Reply #673 on:** Tue, 28 May 2013, 12:09:48 »

calavera, I didn't receive my springs yet.

calavera · « **Reply #674 on:** Tue, 28 May 2013, 13:41:21 »

Quote from: remmeh on Tue, 28 May 2013, 12:09:48

calavera, I didn't receive my springs yet.

PM'd. It shows as delivered last Thursday.

calavera · « **Reply #675 on:** Wed, 29 May 2013, 19:58:49 »

bump. Accepting offers.

calavera · « **Reply #676 on:** Fri, 31 May 2013, 21:35:24 »

TGIF!!!!!!!!!!!!!!!!!! bump

Photoelectric · « **Reply #677 on:** Sat, 01 June 2013, 02:28:06 »

Do you have any other thick PBT DyeSub caps you might be selling in the near future?

. The Blue modifiers in the set you have listed are a no go for me, and I've been looking for light-tone sets.

calavera · « **Reply #678 on:** Sat, 01 June 2013, 14:18:46 »

Quote from: Photoelectric on Sat, 01 June 2013, 02:28:06

Do you have any other thick PBT DyeSub caps you might be selling in the near future? . The Blue modifiers in the set you have listed are a no go for me, and I've been looking for light-tone sets.

Nope. Sorry those are the only imsto dye subs I have.

DarkBone · « **Reply #679 on:** Sun, 02 June 2013, 16:21:49 »

I got my springs.
Thanks a lot :-)

calavera · « **Reply #680 on:** Sun, 02 June 2013, 19:04:45 »

Quote from: DarkBone on Sun, 02 June 2013, 16:21:49

I got my springs.
Thanks a lot :-)

damn, did you just get them? Anyways, good to hear they arrived.

calavera · « **Reply #681 on:** Mon, 03 June 2013, 17:49:38 »

monday bump

calavera · « **Reply #682 on:** Wed, 05 June 2013, 17:39:36 »

dyesubs sold!

calavera · « **Reply #683 on:** Fri, 07 June 2013, 19:58:07 »

TGIF bump

RickyJ · « **Reply #684 on:** Sun, 09 June 2013, 13:40:35 »

No springs yet.

calavera · « **Reply #685 on:** Sun, 09 June 2013, 21:30:21 »

Quote from: RickyJ on Sun, 09 June 2013, 13:40:35

No springs yet.

Refunded in full. Your springs are in Hawaii somewhere lol

calavera · « **Reply #686 on:** Tue, 11 June 2013, 17:37:11 »

bump..gonna add a few keyboards soon.

Jocelyn · « **Reply #687 on:** Tue, 11 June 2013, 17:38:01 »

Quote from: calavera on Tue, 11 June 2013, 17:37:11

bump..gonna add a few keyboards soon.

Can't wait to see what you add

AKIMbO · « **Reply #688 on:** Tue, 11 June 2013, 21:31:21 »

*AKIMbO patiently stalks this thread waiting to see if a filco zero appears*

calavera · « **Reply #689 on:** Wed, 19 June 2013, 17:55:36 »

Quote from: AKIMbO on Tue, 11 June 2013, 21:31:21

*AKIMbO patiently stalks this thread waiting to see if a filco zero appears*

May be in a few weeks. depends.

calavera · « **Reply #690 on:** Sat, 22 June 2013, 01:33:53 »

added some stuff

Rendom · « **Reply #691 on:** Sat, 22 June 2013, 01:48:04 »

sweet mx mini. hopefully your project would work! cant wait for the results!

calavera · « **Reply #692 on:** Sat, 22 June 2013, 19:57:58 »

All PM's replied to.

calavera · « **Reply #693 on:** Sat, 22 June 2013, 20:56:55 »

LZMX sold. Will update with more soon.

AKIMbO · « **Reply #694 on:** Sat, 22 June 2013, 21:17:37 »

Quote from: calavera on Sat, 22 June 2013, 20:56:55

LZMX sold. Will update with more soon.

Cmon zero.

calavera · « **Reply #695 on:** Sat, 22 June 2013, 21:21:15 »

I want your omnikey.

AKIMbO · « **Reply #696 on:** Sat, 22 June 2013, 21:22:06 »

Quote from: calavera on Sat, 22 June 2013, 21:21:15

I want your omnikey.

Nein!

berserkfan · « **Reply #697 on:** Sun, 23 June 2013, 06:12:57 »

hey are you still selling used mx clears? can you clarify about the didode in them - are these from tg3's clears space saver series (which I also have)? doesn't that mean the didode essentially can't be used because of the voltage?

calavera · « **Reply #698 on:** Sun, 23 June 2013, 18:19:20 »

Quote from: berserkfan on Sun, 23 June 2013, 06:12:57

hey are you still selling used mx clears? can you clarify about the didode in them - are these from tg3's clears space saver series (which I also have)? doesn't that mean the didode essentially can't be used because of the voltage?

I bought them from taobao, no clue about the voltage of the diodes? Never heard about this before.

jonathanyu · « **Reply #699 on:** Sun, 23 June 2013, 18:48:57 »

:eek:When I saw the title, I thought you are selling Valentine set.
I also want to find a Valentine set

News:

Author Topic: [FS] Tesoro M7 LED keyboard (Read 108402 times)