Author Topic: Nothing - all gone. (Read 5545 times)

Photekq · « **on:** Wed, 03 April 2013, 17:23:14 »

[FS]

Nothing.

[LF]

Nothing.

Sold items :

Universal TKL Plate
105x MX Blue switches
ANSI-125 Phantom Plate
Imsto thick PBTs - black on grey
Filco TKL Ninja w/ Browns

I am willing to ship any of my items anywhere in the world as long as you pay postage. Postage must be tracked. I can send through any courier.

Payment must be done through Paypal. You can send as a gift or as goods, but no matter which method you will pay all the fees. The price of the product is the price I will receive in my Paypal balance.

Please PM me or post in the thread if you are interested.

Thanks,
Photekq

Photekq · « **Reply #1 on:** Fri, 05 April 2013, 00:49:17 »

Bump!

duq · « **Reply #2 on:** Fri, 05 April 2013, 14:49:20 »

You should PM the user Paranoid. He was selling his set, and he was from Europe, so the shipping rate should transfer over.

Photekq · « **Reply #3 on:** Fri, 05 April 2013, 15:02:54 »

Quote from: duq on Fri, 05 April 2013, 14:49:20

You should PM the user Paranoid. He was selling his set, and he was from Europe, so the shipping rate should transfer over.

I have already contacted him, but he would prefer to not split his PCB from his plate. Thanks anyway

esoomenona · « **Reply #4 on:** Fri, 05 April 2013, 15:04:51 »

Do you have a plate already? Or just don't like his plate's layout? Because I'm pretty sure you need a plate for a Phantom, being there are no PCB mount stabilizer holes.

Photekq · « **Reply #5 on:** Fri, 05 April 2013, 15:06:39 »

Quote from: esoomenona on Fri, 05 April 2013, 15:04:51

Do you have a plate already? Or just don't like his plate's layout? Because I'm pretty sure you need a plate for a Phantom, being there are no PCB mount stabilizer holes.

I'll (hopefully) be using it with one of my custom plates. If things don't go to plan then I also have a Universal TKL plate right now.

Acanthophis · « **Reply #6 on:** Fri, 05 April 2013, 19:57:27 »

Give this man what he wants so he will definitely make his case happen =)

Photekq · « **Reply #7 on:** Fri, 05 April 2013, 19:58:59 »

Quote from: Acanthophis on Fri, 05 April 2013, 19:57:27

Give this man what he wants so he will definitely make his case happen =)

The case is happening even if I don't get the PCB - don't fret!

Photekq · « **Reply #8 on:** Sat, 06 April 2013, 09:47:02 »

Bump!

Photekq · « **Reply #9 on:** Sun, 07 April 2013, 12:22:23 »

Bump!

esoomenona · « **Reply #10 on:** Thu, 11 April 2013, 10:02:32 »

PM'd.

Photekq · « **Reply #11 on:** Thu, 11 April 2013, 10:10:52 »

Should've locked this. PCB/Teensy has been found/purchased.

Photekq · « **Reply #12 on:** Tue, 23 April 2013, 11:12:39 »

OP Updated.

Photekq · « **Reply #13 on:** Wed, 24 April 2013, 12:45:10 »

Bump!

Photekq · « **Reply #14 on:** Thu, 25 April 2013, 09:44:00 »

New item added : Universal TKL Plate

Rendom · « **Reply #15 on:** Thu, 25 April 2013, 10:00:24 »

dust and scratches on the plate? how much shipped to malaysia?

Photekq · « **Reply #16 on:** Thu, 25 April 2013, 10:14:19 »

Quote from: Rendom on Thu, 25 April 2013, 10:00:24

dust and scratches on the plate? how much shipped to malaysia?

Scratches were there when received. They are not deep, and not very noticable unless under direct light. I'll dust it off before it's sent. You're looking at £30 delivery minimum to Malaysia which is pretty hefty.

SmallFry · « **Reply #17 on:** Thu, 25 April 2013, 10:16:25 »

$0.37 switches. Nice. Shipping to the US price?

Photekq · « **Reply #18 on:** Thu, 25 April 2013, 10:22:58 »

Quote from: SmallFry on Thu, 25 April 2013, 10:16:25

$0.37 switches. Nice. Shipping to the US price?

Looking at about £20 for FedEx economy.

Dgsbllx · « **Reply #19 on:** Thu, 25 April 2013, 10:24:18 »

How much for the switches to the UK?

BunnyLake · « **Reply #20 on:** Thu, 25 April 2013, 10:25:18 »

Quote from: SmallFry on Thu, 25 April 2013, 10:16:25

$0.37 switches. Nice. Shipping to the US price?

if you want these smallfry, get em shipped to me, im gonna send you something anyway so just send uk postage to me which will be cheap and ill forward them on at no extra cost

SmallFry · « **Reply #21 on:** Thu, 25 April 2013, 10:26:37 »

Well, UK first. If he doesn't want them I'll have them sent to you, Bunny. Thanks.

BunnyLake · « **Reply #22 on:** Thu, 25 April 2013, 10:27:45 »

Quote from: SmallFry on Thu, 25 April 2013, 10:26:37

Well, UK first. If he doesn't want them I'll have them sent to you, Bunny. Thanks.

no trouble

just lemme know if you need any of mt details or whatever, should only cost a couple quid to the uk

Dgsbllx · « **Reply #23 on:** Thu, 25 April 2013, 10:28:37 »

Quote from: SmallFry on Thu, 25 April 2013, 10:26:37

Well, UK first. If he doesn't want them I'll have them sent to you, Bunny. Thanks.

You take them, you asked first. I thought £20 shipping would put you off, but if you have this deal with Bunny they are all yours.

Photekq · « **Reply #24 on:** Thu, 25 April 2013, 10:29:59 »

Shipping's £8 through Citylink to the UK.

Photekq · « **Reply #25 on:** Thu, 25 April 2013, 10:44:07 »

Could also send 1st class through Royal Mail for £3 max if you want.

Photekq · « **Reply #26 on:** Mon, 29 April 2013, 16:08:14 »

OP Updated.

jdcarpe · « **Reply #27 on:** Mon, 29 April 2013, 16:11:27 »

CommunistWitchDr was looking for an ANSI-125 plate...

Photekq · « **Reply #28 on:** Mon, 29 April 2013, 16:15:42 »

Quote from: jdcarpe on Mon, 29 April 2013, 16:11:27

CommunistWitchDr was looking for an ANSI-125 plate...

I've already been in contact with him and he is unsure about it due to the price of the PCB/Teensy in Mimic's auction. Thanks anyway!

Mugen · « **Reply #29 on:** Mon, 29 April 2013, 16:17:16 »

Will the plate fit a QFR PCB? >_<

gnubag · « **Reply #30 on:** Mon, 29 April 2013, 16:18:30 »

Quote from: Mugen on Mon, 29 April 2013, 16:17:16

Will the plate fit a QFR PCB? >_<

no because there is no cutout for the controller over the arrow keys. (you would need the universal tkl plate

jdcarpe · « **Reply #31 on:** Mon, 29 April 2013, 16:27:00 »

Quote from: Mugen on Mon, 29 April 2013, 16:17:16

Will the plate fit a QFR PCB? >_<

It doesn't have the cutout for the controller.

Edit: Check the next page...

WhiteFireDragon · « **Reply #32 on:** Mon, 29 April 2013, 16:46:51 »

Not sure who you bought it from, but you weren't originally on my order sheet.

Either way, I'll buy it back from you. I want one of these plates, and there are no extras, not even for me

.

Photekq · « **Reply #33 on:** Mon, 29 April 2013, 16:50:38 »

Quote from: WhiteFireDragon on Mon, 29 April 2013, 16:46:51

Not sure who you bought it from, but you weren't originally on my order sheet.

Either way, I'll buy it back from you. I want one of these plates, and there are no extras, not even for me .

PM'd!

okooko · « **Reply #34 on:** Mon, 29 April 2013, 22:17:28 »

Quote from: WhiteFireDragon on Mon, 29 April 2013, 16:46:51

Not sure who you bought it from, but you weren't originally on my order sheet.

Either way, I'll buy it back from you. I want one of these plates, and there are no extras, not even for me .

WFD, it was from me.
I remember I PM'd yourself with Photekq cc'd that if you could pass on my plate onto him.
I hope things have been cleared and resolved, if not just drop me a PM.

Cheers

WhiteFireDragon · « **Reply #35 on:** Mon, 29 April 2013, 22:34:13 »

Yeah Photekq already cleared that up in PMs. My brain seems to have only a certain capacity of memory haha. Anyways I already paid so it's all resolved.

okooko · « **Reply #36 on:** Mon, 29 April 2013, 22:39:14 »

Quote from: WhiteFireDragon on Mon, 29 April 2013, 22:34:13

Yeah Photekq already cleared that up in PMs. My brain seems to have only a certain capacity of memory haha. Anyways I already paid so it's all resolved.

No worries, I'd imagine you have a large amount of emails in/out so its understandable.

Thanks

KuhnTang · « **Reply #37 on:** Mon, 29 April 2013, 22:44:17 »

Is the Nada still for sale?

Photekq · « **Reply #38 on:** Sun, 05 May 2013, 21:21:52 »

OP Updated : Imsto thick PBT caps for sale.

SpAmRaY · « **Reply #39 on:** Sun, 05 May 2013, 21:30:26 »

Photekq · « **Reply #40 on:** Mon, 06 May 2013, 16:22:33 »

OP Updated - Filco TKL for sale.

Photekq · « **Reply #41 on:** Tue, 07 May 2013, 10:50:14 »

£15 PRICE DROP - It costs me ~£10 to ship this thing which makes this a £50 Filco. Someone take this off my hands!

Photekq · « **Reply #42 on:** Tue, 07 May 2013, 13:16:44 »

OP Updated for the second time today. I see a lot of bumps coming along...

News:

Author Topic: Nothing - all gone. (Read 5545 times)