Author Topic: [GB] Duckmini V2 Group Buy [COMPLETE] (Read 51844 times)

Matt3o · « **Reply #50 on:** Wed, 24 July 2013, 12:48:30 »

Are you sure about the white case? I think it's just the silver one took on an angle that seems white

PS: I'm ordering one duckmini too!

naokira · « **Reply #51 on:** Wed, 24 July 2013, 13:54:52 »

Too bad I spent too much lately. If only I could get just the pcb...

Photoelectric · « **Reply #52 on:** Wed, 24 July 2013, 13:55:44 »

According to this thread, white anodizing is lengthy and expensive, so if it were available for this GB, it'd probably cost significantly more money.
http://geekhack.org/index.php?topic=45117.msg940493

turtle · « **Reply #53 on:** Wed, 24 July 2013, 14:10:15 »

I want one so bad but its so expensive

and already have a poker and a pure sigh

TrueCustom · « **Reply #54 on:** Wed, 24 July 2013, 21:14:49 »

The orders are over the maximum quantity for Geekhack, so i closed the GB. Therefore, Please do not place an order even if the form works.
I will send you the invoices soon.

Thanks.

meiosis · « **Reply #55 on:** Wed, 24 July 2013, 23:18:51 »

If anyone backs out may I join in?

Matt3o · « **Reply #56 on:** Thu, 25 July 2013, 00:53:00 »

Quote from: TrueCustom on Wed, 24 July 2013, 21:14:49

The orders are over the maximum quantity for Geekhack, so i closed the GB. Therefore, Please do not place an order even if the form works.
I will send you the invoices soon.

Thanks.

WHHAAT!?! Wasn't it the 27th?! I just bought an SGI Granite just for this

Oh well...

if anyone changed his mind I would gladly take over his/her board.

elton5354 · « **Reply #57 on:** Thu, 25 July 2013, 00:55:28 »

Yeah, he said the limit for GH orders is about 5-8 cases.

Matt3o · « **Reply #58 on:** Thu, 25 July 2013, 00:57:00 »

my bad.

my wallet is safe.

GeeNDL82 · « **Reply #59 on:** Thu, 25 July 2013, 04:18:10 »

hi. Why you close so fast. 27 is the deadline. How can i order??? >.<

Matt3o · « **Reply #60 on:** Thu, 25 July 2013, 04:19:08 »

Quote from: GeeNDL82 on Thu, 25 July 2013, 04:18:10

hi. Why you close so fast. 27 is the deadline. How can i order??? >.<

it seems there was both a deadline and a maxium order quantity

tadbitnerdy · « **Reply #61 on:** Thu, 25 July 2013, 04:35:50 »

Yeah, it wasn't very clear. I hope I made it in on time

GeeNDL82 · « **Reply #62 on:** Thu, 25 July 2013, 04:36:07 »

Feel not good right now

TrueCustom · « **Reply #63 on:** Thu, 25 July 2013, 05:08:32 »

I am very sorrry for that i didn't write the maximun quantity on this thread.

Usually, Duck0113 makes enough cases for reparing, so if you really want to buy Duckmini V2, please send me a PM by 27 July.
Once the GB finishes and if there are left cases, i will contact you in order.
I won't send an invoice for this backorder and won't collect payment until i know there are left cases.

I am really sorry about it again.
Thanks.

feng · « **Reply #64 on:** Thu, 25 July 2013, 05:39:03 »

PM sent.

elton5354 · « **Reply #65 on:** Thu, 25 July 2013, 05:40:56 »

Can you list who made it to the GB (I hope I did)? Thanks

GeeNDL82 · « **Reply #66 on:** Thu, 25 July 2013, 05:49:20 »

PM sent too :>

mashby · « **Reply #67 on:** Thu, 25 July 2013, 11:54:22 »

I sent a PM just in case. I have not received an invoice yet for the order that I placed previously.

Kayliss · « **Reply #68 on:** Fri, 26 July 2013, 01:16:51 »

Thanks for your work TrueCustom.

GeeNDL82 · « **Reply #69 on:** Fri, 26 July 2013, 01:52:44 »

I AM WAITING MY NAME IN ORDER LIST

___q · « **Reply #70 on:** Fri, 26 July 2013, 09:30:53 »

So excited about this one, can't wait to get my invoice.

I get to desolder a lot of complicated blue ALPS sometime this weekend

mashby · « **Reply #71 on:** Fri, 26 July 2013, 11:51:11 »

Quote from: TrueCustom on Mon, 22 July 2013, 09:57:04

mashby / Silver basic set x 1, Silver Duck Raiser x 1, Red Duck Raiser x 1 / Preparing invoice

tadbitnerdy · « **Reply #72 on:** Fri, 26 July 2013, 12:01:17 »

w00t, I'm in, too!

ebacho · « **Reply #73 on:** Fri, 26 July 2013, 13:58:53 »

Now the hard part is deciding whether to use Alps or MX

Photoelectric · « **Reply #74 on:** Fri, 26 July 2013, 14:04:31 »

Quote from: ebacho on Fri, 26 July 2013, 13:58:53

Now the hard part is deciding whether to use Alps or MX

Seeing as there are close to no custom modern options for Alps, I'd go with Alps!

ebacho · « **Reply #75 on:** Fri, 26 July 2013, 14:11:32 »

Quote from: Photoelectric on Fri, 26 July 2013, 14:04:31

Quote from: ebacho on Fri, 26 July 2013, 13:58:53
Now the hard part is deciding whether to use Alps or MX

Seeing as there are close to no custom modern options for Alps, I'd go with Alps!

I haven't actually tried any Alps/Alps clone variants I like though, barring Montereys, which don't have the same pin configuration as real Alps do if I recall correctly.

elton5354 · « **Reply #76 on:** Fri, 26 July 2013, 14:27:25 »

Where can I get some clicky alps?

Photoelectric · « **Reply #77 on:** Fri, 26 July 2013, 14:28:30 »

Matias has some for sale through mechanicalkeyboards.com.
http://mechanicalkeyboards.com/shop/index.php?l=product_list&c=52

elton5354 · « **Reply #78 on:** Fri, 26 July 2013, 14:36:43 »

Thanks! I also wonder if the caps lock are all off centered?

___q · « **Reply #79 on:** Fri, 26 July 2013, 14:58:07 »

Clearly you should all use cherry switches, so my keyboard will be more unique!

EDIT:: And it is (sadly) correct that Monterey blues have different pin positions than normal alps

Matt3o · « **Reply #80 on:** Sat, 27 July 2013, 11:01:07 »

Invoice received and paid.

Thanks to TrueCustom and tjcaustin!

please declare a very low value when shipping (such as $30

)

ebacho · « **Reply #81 on:** Sat, 27 July 2013, 12:08:55 »

Paid too - Thanks TrueCustom for this GB!

tadbitnerdy · « **Reply #82 on:** Sat, 27 July 2013, 17:10:14 »

Paid!

Sent from my iPhone using Tapatalk 2

___q · « **Reply #83 on:** Sat, 27 July 2013, 17:57:01 »

Payment sent!

Thanks for running this!

Glod · « **Reply #84 on:** Sat, 27 July 2013, 17:58:44 »

congratulations to those who got in on this.

kind of a weird thing to say to people who voluntarily spent the money but due to the limited amount and how crazy unique this is i think they deserve congratulations.

god · « **Reply #85 on:** Sat, 27 July 2013, 18:50:24 »

Paid.

tjcaustin · « **Reply #86 on:** Sun, 28 July 2013, 03:09:18 »

GeeNDL82 · « **Reply #87 on:** Mon, 29 July 2013, 11:01:52 »

waiting for 1 slot

elton5354 · « **Reply #88 on:** Tue, 30 July 2013, 23:08:55 »

Quote from: GeeNDL82 on Mon, 29 July 2013, 11:01:52

waiting for 1 slot

Well, one refunded, so you can email/PM OP for the spot

YongJK · « **Reply #89 on:** Wed, 31 July 2013, 01:30:07 »

I have ordered somewhere else.
But can I ask this duckminiv2 accept both plate and pcb mounted stabilizer ?

TrueCustom · « **Reply #90 on:** Wed, 31 July 2013, 04:27:44 »

Quote from: YongJK on Wed, 31 July 2013, 01:30:07

I have ordered somewhere else.
But can I ask this duckminiv2 accept both plate and pcb mounted stabilizer ?

Do you mean Cherry and Alps frame? Then yes.
Also, you can install Cherry switch without frame. It means you can use PCB mounted stabilizer with Cherry switch.

Thanks.

Matt3o · « **Reply #91 on:** Wed, 31 July 2013, 05:07:39 »

okay I'll be the one who asks this.

what's the lead time?

elton5354 · « **Reply #92 on:** Wed, 31 July 2013, 05:12:39 »

I think he said end of August

Will you come back to Toronto by then? Can't wait!

Matt3o · « **Reply #93 on:** Wed, 31 July 2013, 05:40:28 »

Quote from: elton5354 on Wed, 31 July 2013, 05:12:39

I think he said end of August

Will you come back to Toronto by then? Can't wait!

Nice!

YongJK · « **Reply #94 on:** Wed, 31 July 2013, 07:25:27 »

Quote from: TrueCustom on Wed, 31 July 2013, 04:27:44

Quote from: YongJK on Wed, 31 July 2013, 01:30:07
I have ordered somewhere else.
But can I ask this duckminiv2 accept both plate and pcb mounted stabilizer ?

Do you mean Cherry and Alps frame? Then yes.
Also, you can install Cherry switch without frame. It means you can use PCB mounted stabilizer with Cherry switch.

Thanks.

I ordered Cherry frame.
But I am going to use frame. So I can still have PCB mounted stabilizer on it right ?

At least it gets the same in my kmac will be fine.

rurushu · « **Reply #95 on:** Wed, 31 July 2013, 10:13:37 »

Quote from: YongJK on Wed, 31 July 2013, 07:25:27

Quote from: TrueCustom on Wed, 31 July 2013, 04:27:44
Quote from: YongJK on Wed, 31 July 2013, 01:30:07
I have ordered somewhere else.
But can I ask this duckminiv2 accept both plate and pcb mounted stabilizer ?

Do you mean Cherry and Alps frame? Then yes.
Also, you can install Cherry switch without frame. It means you can use PCB mounted stabilizer with Cherry switch.

Thanks.
I ordered Cherry frame.
But I am going to use frame. So I can still have PCB mounted stabilizer on it right ?

At least it gets the same in my kmac will be fine.

I think you can use PCB mount stabs on it even if you use the frame...

YongJK · « **Reply #96 on:** Wed, 31 July 2013, 10:14:05 »

Quote from: rurushu on Wed, 31 July 2013, 10:13:37

Quote from: YongJK on Wed, 31 July 2013, 07:25:27
Quote from: TrueCustom on Wed, 31 July 2013, 04:27:44
Quote from: YongJK on Wed, 31 July 2013, 01:30:07
I have ordered somewhere else.
But can I ask this duckminiv2 accept both plate and pcb mounted stabilizer ?

Do you mean Cherry and Alps frame? Then yes.
Also, you can install Cherry switch without frame. It means you can use PCB mounted stabilizer with Cherry switch.

Thanks.
I ordered Cherry frame.
But I am going to use frame. So I can still have PCB mounted stabilizer on it right ?

At least it gets the same in my kmac will be fine.
I think you can use PCB mount stabs on it even if you use the frame...

Oh shot.
You are here. Sweat.

rurushu · « **Reply #97 on:** Wed, 31 July 2013, 10:16:48 »

Quote from: YongJK on Wed, 31 July 2013, 10:14:05

Quote from: rurushu on Wed, 31 July 2013, 10:13:37
Quote from: YongJK on Wed, 31 July 2013, 07:25:27
Quote from: TrueCustom on Wed, 31 July 2013, 04:27:44
Quote from: YongJK on Wed, 31 July 2013, 01:30:07
I have ordered somewhere else.
But can I ask this duckminiv2 accept both plate and pcb mounted stabilizer ?

Do you mean Cherry and Alps frame? Then yes.
Also, you can install Cherry switch without frame. It means you can use PCB mounted stabilizer with Cherry switch.

Thanks.
I ordered Cherry frame.
But I am going to use frame. So I can still have PCB mounted stabilizer on it right ?

At least it gets the same in my kmac will be fine.
I think you can use PCB mount stabs on it even if you use the frame...
Oh shot.
You are here. Sweat.

why you are so surprised??? this is a forum... ==|||
anyway, back to topic. You can check duckmini v2's previous pics on the stabs part....

GeeNDL82 · « **Reply #98 on:** Wed, 31 July 2013, 12:12:21 »

lol, the person who refunded orders 2 basic set. It's mean that we might have 2 slots, 1slot for 1 basic sets

mashby · « **Reply #99 on:** Wed, 31 July 2013, 12:56:53 »

Paid yesterday.

News:

Author Topic: [GB] Duckmini V2 Group Buy [COMPLETE] (Read 51844 times)