Author Topic: [EK] Made in Japan Trunk Carrying Case for HHKB  (Read 6324 times)

0 Members and 1 Guest are viewing this topic.

Offline dante

  • Thread Starter
  • Posts: 2553

Offline metalliqaz

  • * Maker
  • Posts: 4951
  • Location: the Making Stuff subforum
  • Leopold fanboy
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #1 on: Tue, 22 October 2013, 21:42:31 »
Wow.  I can imagine showing up somewhere with that thing and calmly opening it up before wordlessly setting up my HHKB and then typing away.

I'd never live it down.

Offline Belfong

  • * Exalted Elder
  • Posts: 5228
  • Location: Malaysia
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #2 on: Tue, 22 October 2013, 21:42:44 »
This is getting to be a really expensive hobby!
 

Offline bueller

  • MX baller
  • * Esteemed Elder
  • Posts: 3769
  • Location: Perth, Australia
  • Church of the Ergo Clear
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #3 on: Tue, 22 October 2013, 21:44:20 »
Wow.  I can imagine showing up somewhere with that thing and calmly opening it up before wordlessly setting up my HHKB and then typing away.

I'd never live it down.

That thing is enough to resurrect anyone's virginity.
It's a good width!  If it's half-width it's too narrow, and full-width is too wide. 

[WTT] bueller's trade thread - CLACKS WANTED

Offline Latin00032

  • * Destiny Supporter
  • Posts: 1528
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #4 on: Tue, 22 October 2013, 21:48:00 »
I think I want it.

Do I lose my virginity after I buy it or after I receive it? Or is it after I am seen in public with it?

Offline keymaster

  • Topre Revolution Theorist
  • Posts: 1148
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #5 on: Tue, 22 October 2013, 21:59:49 »
Highly recommended! I recently showed up to an interview with my HHKB discretely stowed away in this fine carrying case. When the interviewer asked for my portfolio, I nonchalantly whipped out my HHKB. The tricolor OG Click Clack I spent half my paycheck on caught his eye immediately. At that moment I knew I've had 'em -- didn't even had to pull out my portfolio (which didn't fit, so I didn't bother bringing it). Needless to say, I was hired on the spot. I stood up and made a 360 degree turn and walked out of his office.

Offline esoomenona

  • Gnillort?
  • Posts: 5323
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #6 on: Tue, 22 October 2013, 22:03:53 »
I've gotten so much putenanny with the previous HHKB carrying case, that the only logical step in my poon-obtaining evolution was this case. And man, did it deliver. I mean, the amount of punanny that this thing gets me is insane. Do yourself a favor, and stay away from this case. It will kill a normal man who can't handle.

Offline Latin00032

  • * Destiny Supporter
  • Posts: 1528
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #7 on: Tue, 22 October 2013, 22:04:26 »
Highly recommended! I recently showed up to an interview with my HHKB discretely stowed away in this fine carrying case. When the interviewer asked for my portfolio, I nonchalantly whipped out my HHKB. The tricolor OG Click Clack I spent half my paycheck on caught his eye immediately. At that moment I knew I've had 'em -- didn't even had to pull out my portfolio (which didn't fit, so I didn't bother bringing it). Needless to say, I was hired on the spot. I stood up and made a 360 degree turn and walked out of his office.

Wow! That's leet!

Do you really have this case, or was that just a story?

Offline bueller

  • MX baller
  • * Esteemed Elder
  • Posts: 3769
  • Location: Perth, Australia
  • Church of the Ergo Clear
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #8 on: Tue, 22 October 2013, 22:35:12 »
I've gotten so much putenanny with the previous HHKB carrying case, that the only logical step in my poon-obtaining evolution was this case. And man, did it deliver. I mean, the amount of punanny that this thing gets me is insane. Do yourself a favor, and stay away from this case. It will kill a normal man who can't handle.

Hahahahaha putenanny. Gold!
It's a good width!  If it's half-width it's too narrow, and full-width is too wide. 

[WTT] bueller's trade thread - CLACKS WANTED

Offline acantha

  • Posts: 230
  • Location: Northeast Ohio
  • Aure Entuluva
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #9 on: Tue, 22 October 2013, 22:43:39 »
I don't care how geek****ingtastic that thing is.... I want it so bad its taking all my willpower to resist ordering it right this second.
All the Happy Hacking Things
   

Offline demik

  • Pronounced "demique"
  • Posts: 11159
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #10 on: Tue, 22 October 2013, 23:33:35 »
I've gotten so much putenanny with the previous HHKB carrying case, that the only logical step in my poon-obtaining evolution was this case. And man, did it deliver. I mean, the amount of punanny that this thing gets me is insane. Do yourself a favor, and stay away from this case. It will kill a normal man who can't handle.

3 diff ways to say vagina in one reply. i applaud u moose.
No, he’s not around. How that sound to ya? Jot it down.

Offline kenmai9

  • Unicornforce
  • * Exquisite Elder
  • Posts: 2156
  • Location: Orange County, CA
  • Skrrr
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #11 on: Tue, 22 October 2013, 23:53:05 »
I've gotten so much putenanny with the previous HHKB carrying case, that the only logical step in my poon-obtaining evolution was this case. And man, did it deliver. I mean, the amount of punanny that this thing gets me is insane. Do yourself a favor, and stay away from this case. It will kill a normal man who can't handle.

But did you get hired?

Offline tbc

  • Posts: 2365
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #12 on: Tue, 22 October 2013, 23:58:20 »
they should have this as the standard packaging for the HHKB
ALL zombros wanted:  dead or undead or dead-dead.

Offline Pacifist

  • Report me *again* if there are gifs in my sig
  • * Elevated Elder
  • Posts: 3599
  • Location: Cali
  • on hiatus
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #13 on: Wed, 23 October 2013, 00:07:21 »
I have a dream...

That when I have money I'll buy a HHKB, this case, and enough topre CC's to cover the whole board

Offline swill

  • * Elevated Elder
  • Posts: 3365
  • Location: Canada eh
  • builder & enabler
    • swillkb.com
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #14 on: Wed, 23 October 2013, 00:21:11 »
I stood up and made a 360 degree turn and walked out of his office.

360 degree turn to leave?  That seams a little excessive.  But you have topre click clacks so excessive is expected.   :p

Offline ohgodpleaseno

  • Posts: 67
  • Location: The Sun
  • Nonononono please no
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #15 on: Wed, 23 October 2013, 00:21:50 »
Here's a link to the maker's site. At 4680 Yen the $55 dollar EK price isn't too big of a markup. I'm not sure what "tax" and "shipping" costs are added though.

http://shop.bird-electron.co.jp/shopdetail/005006000005/order/

Offline demik

  • Pronounced "demique"
  • Posts: 11159
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #16 on: Wed, 23 October 2013, 00:22:23 »
I stood up and made a 360 degree turn and walked out of his office.

360 degree turn to leave?  That seams a little excessive.  But you have topre click clacks so excessive is expected.   :p

No, he’s not around. How that sound to ya? Jot it down.

Offline keymaster

  • Topre Revolution Theorist
  • Posts: 1148
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #17 on: Wed, 23 October 2013, 00:30:49 »
I stood up and made a 360 degree turn and walked out of his office.

360 degree turn to leave?  That seams a little excessive.  But you have topre click clacks so excessive is expected.   :p

Show Image


Fixed.


Offline esoomenona

  • Gnillort?
  • Posts: 5323
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #18 on: Wed, 23 October 2013, 01:00:26 »
Honestly, if there was room to store a mouse. But then, I suppose I could find something smaller to hold the mouse.

Offline brialona

  • Posts: 67
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #19 on: Wed, 23 October 2013, 01:08:02 »
wow thats so cute
ozil

Offline Belfong

  • * Exalted Elder
  • Posts: 5228
  • Location: Malaysia
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #20 on: Wed, 23 October 2013, 01:31:00 »
The question I have is IF I buy a HHKB and this bag from EK, will they pack them together so as to save shipping cost? That would make sense to purchase both from them!
 

Offline redskull

  • Posts: 381
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #21 on: Wed, 23 October 2013, 02:55:54 »
The question I have is IF I buy a HHKB and this bag from EK, will they pack them together so as to save shipping cost? That would make sense to purchase both from them!
just order everything on one go, and it will that. else, e-mail them before hand asking to bundle the shipping together.

Offline Martyr

  • Posts: 58
  • Location: New Zealand
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #22 on: Wed, 23 October 2013, 03:42:56 »
Not sure what to think, looks cool but... a "suitcase" for a keyboard.

Offline Reomero

  • Posts: 261
  • Location: New Zealand
  • Manual breather
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #23 on: Wed, 23 October 2013, 05:02:25 »
Wow. :eek:

Offline MJ45

  • HHKB Pro
  • Posts: 530
  • Location: Chicagoland
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #24 on: Wed, 23 October 2013, 05:35:17 »
It is made of "faux leather" whats up with that?

Offline Latin00032

  • * Destiny Supporter
  • Posts: 1528
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #25 on: Wed, 23 October 2013, 05:53:54 »
It is made of "faux leather" whats up with that?
as long as it's durable

Offline vivalarevolución

  • Posts: 2146
  • Location: Naptown, Indiana, USA
  • Keep it real b/c any other way is too stressful
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #26 on: Wed, 23 October 2013, 05:56:50 »
Highly recommended! I recently showed up to an interview with my HHKB discretely stowed away in this fine carrying case. When the interviewer asked for my portfolio, I nonchalantly whipped out my HHKB. The tricolor OG Click Clack I spent half my paycheck on caught his eye immediately. At that moment I knew I've had 'em -- didn't even had to pull out my portfolio (which didn't fit, so I didn't bother bringing it). Needless to say, I was hired on the spot. I stood up and made a 360 degree turn and walked out of his office.

This made me laugh.  Congrats.
Wish I had some gif or quote for this space, but I got nothing

Offline dorkvader

  • Posts: 6289
  • Location: Boston area
  • all about the "hack" in "geekhack"
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #27 on: Wed, 23 October 2013, 07:41:11 »
Honestly, if there was room to store a mouse. But then, I suppose I could find something smaller to hold the mouse.

a pcmcia slot mouse would probably fit
http://www.amazon.com/dp/B000G1D8HU/

Offline hcry4

  • HHKB Hoarder
  • Posts: 403
  • Location: SF, CA
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #28 on: Wed, 23 October 2013, 09:08:25 »
I'm probably going to get this sooner or later...

Offline esoomenona

  • Gnillort?
  • Posts: 5323
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #29 on: Wed, 23 October 2013, 09:36:33 »
Honestly, if there was room to store a mouse. But then, I suppose I could find something smaller to hold the mouse.

a pcmcia slot mouse would probably fit
http://www.amazon.com/dp/B000G1D8HU/

Eww, y u do dis? Have you used that thing? How is it? I was thinking space for my MX Revolution...

Offline acantha

  • Posts: 230
  • Location: Northeast Ohio
  • Aure Entuluva
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #30 on: Wed, 23 October 2013, 13:15:16 »
I knew I should have bought one last night. Now they're sold out.
All the Happy Hacking Things
   

Offline ctbear

  • Posts: 85
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #31 on: Sun, 27 October 2013, 13:35:31 »
On a related note, is there a good, durable case/bag that fits the HHKB? I have the Cosmos sleeve for Apple wireless keyboard and while it works okay, I'm looking for something better.

Offline vivalarevolución

  • Posts: 2146
  • Location: Naptown, Indiana, USA
  • Keep it real b/c any other way is too stressful
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #32 on: Fri, 28 February 2014, 11:13:49 »
Anybody know where I could get one of these things?  Does not seem like elite keyboards has restocked them, or is any time soon.
Wish I had some gif or quote for this space, but I got nothing

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Posts: 14667
  • Location: ¯\(°_o)/¯
  • because reasons.......
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #33 on: Fri, 28 February 2014, 11:17:14 »

Offline vivalarevolución

  • Posts: 2146
  • Location: Naptown, Indiana, USA
  • Keep it real b/c any other way is too stressful
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #34 on: Fri, 28 February 2014, 11:22:03 »
http://www.amazon.co.jp/バード電子-GC-HHK-キーボードトランク/dp/B00CPE7BNI

^^ from amazonjp if you use tenso maybe?

I don't use Tenso because I'm too lazy to read to read through all the terms and instructions, but I have emailed Smart Imports about stuff not on their website and I am pretty sure they will send you anything if you provide them with the proper information.  Less hassle than Tenso for a slight price premium.

Thanks, though, that link got me excited.
Wish I had some gif or quote for this space, but I got nothing

Offline vivalarevolución

  • Posts: 2146
  • Location: Naptown, Indiana, USA
  • Keep it real b/c any other way is too stressful
Wish I had some gif or quote for this space, but I got nothing

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Posts: 14667
  • Location: ¯\(°_o)/¯
  • because reasons.......
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #36 on: Fri, 28 February 2014, 11:28:33 »
You could always post a WTB in the classifieds, you never know someone might have one.

Offline vivalarevolución

  • Posts: 2146
  • Location: Naptown, Indiana, USA
  • Keep it real b/c any other way is too stressful
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #37 on: Fri, 28 February 2014, 11:32:12 »
You could always post a WTB in the classifieds, you never know someone might have one.

You keep coming up with these great ideas for me, if you just want to take over my profile, I'm fine with that.
Wish I had some gif or quote for this space, but I got nothing

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Posts: 14667
  • Location: ¯\(°_o)/¯
  • because reasons.......
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #38 on: Fri, 28 February 2014, 11:43:26 »
You could always post a WTB in the classifieds, you never know someone might have one.

You keep coming up with these great ideas for me, if you just want to take over my profile, I'm fine with that.

:P

Offline roaming pear

  • Posts: 73
  • THE Roaming Pear
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #39 on: Wed, 23 April 2014, 22:31:04 »
that looks sweet
Does anyone have any accessories or key caps or other poker 2 related things lying around that they are not using?  I don't mind taking it off your hands if you no longer want it...

Offline bazh

  • * Exquisite Elder
  • Posts: 970
  • Location: Finland
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #40 on: Wed, 23 April 2014, 22:35:28 »
Faux leather :(
HHKB Pro2 white

Newbie again

Offline roaming pear

  • Posts: 73
  • THE Roaming Pear
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #41 on: Wed, 23 April 2014, 23:05:57 »
:(
Does anyone have any accessories or key caps or other poker 2 related things lying around that they are not using?  I don't mind taking it off your hands if you no longer want it...

Offline Lain1911

  • God of the Wired
  • Posts: 383
Re: [EK] Made in Japan Trunk Carrying Case for HHKB
« Reply #42 on: Thu, 24 April 2014, 12:18:33 »
"What's in the truck sir? A musical instrument? A gun?" "No sir it's my keyboard." *derp