« previous next »
Pages:  [1]     Go Down

Author Topic: Spacebar Woes  (Read 1318 times)

0 Members and 1 Guest are viewing this topic.

Offline aidanmulvenna

  • Thread Starter
  • Posts: 12
Spacebar Woes
« on: Tue, 26 November 2013, 13:03:35 »
My spacebar has become very wobbly - as in it will make an annoying sound, even if it was barely touched. This only happens on the right side.

The metal stab spring is very bendy too.

The plastic stabilisers come out if i try to take off the spacebar.

Is it the plastic, metal or cap that is doing this, or a combination?
Logged

Filco MJ2 Ninja with MX Blues

Offline Photoelectric

  • * Administrator
  • Posts: 6766
Re: Spacebar Woes
« Reply #1 on: Tue, 26 November 2013, 13:37:42 »
Get some teflon/pipe tape and put a small square over stabilizer inserts.  If you don't have teflon tape, just use some transparent plastic wrap you get in large rolls for food storage purposes.  Insert the covered stabilizer pieces into your spacebar, and they will fit snugly, without fallilng out.  It also helps to lubricate the metal stabilizer bar where it inserts into the white insert pieces.  You need proper grease for that.  I've seen good reviews for MechLube from elitekeyboards.com.
Logged
- Keyboards: LZ-GH (Jailhouse Blues), M65-a, MIRA SE, E8-V1, MOON TKL, CA66
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline metalliqaz

  • * Maker
  • Posts: 4951
  • Location: the Making Stuff subforum
  • Leopold fanboy
Re: Spacebar Woes
« Reply #2 on: Tue, 26 November 2013, 13:39:14 »
Yes you want them to fit snug.  They are usually too loose on SP keys.  I use little squares cut out from my receipts. (thin paper)
Logged

Offline esoomenona

  • Gnillort?
  • Posts: 5323
Re: Spacebar Woes
« Reply #3 on: Tue, 26 November 2013, 13:41:30 »
I used little pieces of toilet paper and that worked just fine. Easier to tear little pieces as your going along than to cut up pieces of other types of material, IMO. But really, any sort of thing along these lines will do it for you.
Logged

Offline aidanmulvenna

  • Thread Starter
  • Posts: 12
Re: Spacebar Woes
« Reply #4 on: Tue, 26 November 2013, 15:57:48 »
Where exactly do i put the squares?

Sorry for not understanding.r
Logged

Filco MJ2 Ninja with MX Blues

Offline esoomenona

  • Gnillort?
  • Posts: 5323
Re: Spacebar Woes
« Reply #5 on: Tue, 26 November 2013, 15:58:43 »
Place them over the open stem hole on the cap, then stick the stabilizer insert into the hole, pushing the squares in with it.
Logged

Offline Photoelectric

  • * Administrator
  • Posts: 6766
Re: Spacebar Woes
« Reply #6 on: Tue, 26 November 2013, 16:01:10 »
I've made photographs for this before, here:
http://geekhack.org/index.php?topic=47605.msg1015571#msg1015571
Logged
- Keyboards: LZ-GH (Jailhouse Blues), M65-a, MIRA SE, E8-V1, MOON TKL, CA66
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline CPTBadAss

  • Woke up like this
  • Posts: 14383
    • Tactile Zine
Re: Spacebar Woes
« Reply #7 on: Tue, 26 November 2013, 16:01:56 »
Thank you Photoelectric. I'm borrowing those :D.
Logged

Offline aidanmulvenna

  • Thread Starter
  • Posts: 12
Re: Spacebar Woes
« Reply #8 on: Tue, 26 November 2013, 16:29:52 »
That clears it up, photo.

Thanks again.

I have stashed that on opera.
Logged

Filco MJ2 Ninja with MX Blues

Offline CPTBadAss

  • Woke up like this
  • Posts: 14383
    • Tactile Zine
Re: Spacebar Woes
« Reply #9 on: Tue, 26 November 2013, 16:31:24 »
I've also added it to Simple Questions Simple Answers.
Logged

Offline aidanmulvenna

  • Thread Starter
  • Posts: 12
Re: Spacebar Woes
« Reply #10 on: Tue, 26 November 2013, 16:38:17 »
Nice.  (I am a man of few words).
Logged

Filco MJ2 Ninja with MX Blues

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 21175
  • Location: melbourne.vic.au
  • Missed another sale.
Re: Spacebar Woes
« Reply #11 on: Tue, 26 November 2013, 23:25:49 »
Personally I found teflon tape too thin and fiddly.

A 1cm square of plastic ziplock bag worked wonders for me.
Logged
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But that’s incorrect. It’s in HHKB’s slogan, but when America’s cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Offline terran5992

  • Posts: 1485
  • Location: Singapore
  • One With The Cup Rubber
Re: Spacebar Woes
« Reply #12 on: Wed, 27 November 2013, 00:32:10 »
I used blu-tac . A bit permanent but get the job does well
Logged

Listokei Custom  |  HHKB Pro 2  |  Topre Realforce 103UBH  |  Armageddon MKA-3

Pages:  [1]     Go Up
« previous next »