Are your eyes bleeding? You can always change your theme.
0 Members and 1 Guest are viewing this topic.
Please make viper groupbuy happen. That HHKB layout looks beautiful
Viper and eagle buy is happening right after the lightsaver v2 buy, which is starting right after the Orion gb is shipped, I believe
Quote from: calvins1 on Wed, 02 April 2014, 21:14:07Viper and eagle buy is happening right after the lightsaver v2 buy, which is starting right after the Orion gb is shipped, I believeWho is running that from here?
Quote from: Latin00032 on Wed, 02 April 2014, 21:41:33Quote from: calvins1 on Wed, 02 April 2014, 21:14:07Viper and eagle buy is happening right after the lightsaver v2 buy, which is starting right after the Orion gb is shipped, I believeWho is running that from here?elton5354 is in May-ish.
why wait that long..?someone should just run one now.
Quote from: jwaz on Wed, 02 April 2014, 22:45:37why wait that long..?someone should just run one now.Good point.Can't we just piggy back off the current one?
i absolutely want one of these. if i have to pay a bit more to have someone ship me one from the US, that's fine, as long as i can help this happen sooner rather than later.
Quote from: sth on Thu, 03 April 2014, 02:06:24i absolutely want one of these. if i have to pay a bit more to have someone ship me one from the US, that's fine, as long as i can help this happen sooner rather than later.From the US... Did I miss something...
you guys are really in a rush eh?
If today had been a hippo, then you'd really have to worry about tomorrow.
Quote from: elton5354 on Thu, 03 April 2014, 02:17:51you guys are really in a rush eh?I'm definitely prepared to wait, as I need to decide between the Eagle and the Viper.inb4 some adorable little girl ask me 'Why not both?'
What software is used to program these?Are the settings stored keyboard-side, or in a config file on your computer?
Quote from: StylinGreymon on Fri, 04 April 2014, 01:52:24What software is used to program these?Are the settings stored keyboard-side, or in a config file on your computer?Good question.I was wondering the same exact thing.
Quote from: StylinGreymon on Fri, 04 April 2014, 01:52:24What software is used to program these?Are the settings stored keyboard-side, or in a config file on your computer?Firmware is here for basically all Duck boards http://duck0113.tistory.com/84. The program generates a .hex file which is flashed to the keyboard itself including macros and LED controls.
Quote from: nuclearsandwich on Fri, 04 April 2014, 02:22:18Quote from: StylinGreymon on Fri, 04 April 2014, 01:52:24What software is used to program these?Are the settings stored keyboard-side, or in a config file on your computer?Firmware is here for basically all Duck boards http://duck0113.tistory.com/84. The program generates a .hex file which is flashed to the keyboard itself including macros and LED controls.Thanks! Looks like it may even be fairly straightforward to use. And it would be great if the board could 'remember' your setting from computer to computer.
Quote from: tribade on Fri, 04 April 2014, 20:49:36Quote from: nuclearsandwich on Fri, 04 April 2014, 02:22:18Quote from: StylinGreymon on Fri, 04 April 2014, 01:52:24What software is used to program these?Are the settings stored keyboard-side, or in a config file on your computer?Firmware is here for basically all Duck boards http://duck0113.tistory.com/84. The program generates a .hex file which is flashed to the keyboard itself including macros and LED controls.Thanks! Looks like it may even be fairly straightforward to use. And it would be great if the board could 'remember' your setting from computer to computer.I'm not quite sure what you mean by "settings" but the keyboard layout you choose (including macro keys) is programmed into the onboard controller. If layout and O2D programmed macros is what you mean by settings that's exactly the case.
Quote from: nuclearsandwich on Fri, 04 April 2014, 22:33:26Quote from: tribade on Fri, 04 April 2014, 20:49:36Quote from: nuclearsandwich on Fri, 04 April 2014, 02:22:18Quote from: StylinGreymon on Fri, 04 April 2014, 01:52:24What software is used to program these?Are the settings stored keyboard-side, or in a config file on your computer?Firmware is here for basically all Duck boards http://duck0113.tistory.com/84. The program generates a .hex file which is flashed to the keyboard itself including macros and LED controls.Thanks! Looks like it may even be fairly straightforward to use. And it would be great if the board could 'remember' your setting from computer to computer.I'm not quite sure what you mean by "settings" but the keyboard layout you choose (including macro keys) is programmed into the onboard controller. If layout and O2D programmed macros is what you mean by settings that's exactly the case.Yeah I guess I didn't define my terms correctly. That is exactly what I meant by settings. Not so much the macros; mostly the function layer.
Quote from: tribade on Fri, 04 April 2014, 23:18:35Quote from: nuclearsandwich on Fri, 04 April 2014, 22:33:26Quote from: tribade on Fri, 04 April 2014, 20:49:36Quote from: nuclearsandwich on Fri, 04 April 2014, 02:22:18Quote from: StylinGreymon on Fri, 04 April 2014, 01:52:24What software is used to program these?Are the settings stored keyboard-side, or in a config file on your computer?Firmware is here for basically all Duck boards http://duck0113.tistory.com/84. The program generates a .hex file which is flashed to the keyboard itself including macros and LED controls.Thanks! Looks like it may even be fairly straightforward to use. And it would be great if the board could 'remember' your setting from computer to computer.I'm not quite sure what you mean by "settings" but the keyboard layout you choose (including macro keys) is programmed into the onboard controller. If layout and O2D programmed macros is what you mean by settings that's exactly the case.Yeah I guess I didn't define my terms correctly. That is exactly what I meant by settings. Not so much the macros; mostly the function layer.Yeah that's all in the keyboard.
Ressing thread, I'm still hyped!
Quote from: Rewind on Sun, 20 April 2014, 08:18:32Ressing thread, I'm still hyped!Haha, me too! I've been thinking about this board for a while now. Would be a fantastic soldering project too.
Quote from: tribade on Sun, 20 April 2014, 12:37:51Quote from: Rewind on Sun, 20 April 2014, 08:18:32Ressing thread, I'm still hyped!Haha, me too! I've been thinking about this board for a while now. Would be a fantastic soldering project too.The only thing I'm worried about is if this opens up as a GB on geek hack and only supports 15 spots like the lightsaver v2 then I'll miss it because it will probably fill up real quick.
Quote from: Latin00032 on Sun, 20 April 2014, 13:46:29Quote from: tribade on Sun, 20 April 2014, 12:37:51Quote from: Rewind on Sun, 20 April 2014, 08:18:32Ressing thread, I'm still hyped!Haha, me too! I've been thinking about this board for a while now. Would be a fantastic soldering project too.The only thing I'm worried about is if this opens up as a GB on geek hack and only supports 15 spots like the lightsaver v2 then I'll miss it because it will probably fill up real quick.This might even be more popular than lightsaver or orion cause of the uniqueness of it being one of the only HHKB-styled MX boards that don't use blockers.I expect upwards of 30-40 people wanting to get this.
Quote from: calvins1 on Sun, 20 April 2014, 13:47:58Quote from: Latin00032 on Sun, 20 April 2014, 13:46:29Quote from: tribade on Sun, 20 April 2014, 12:37:51Quote from: Rewind on Sun, 20 April 2014, 08:18:32Ressing thread, I'm still hyped!Haha, me too! I've been thinking about this board for a while now. Would be a fantastic soldering project too.The only thing I'm worried about is if this opens up as a GB on geek hack and only supports 15 spots like the lightsaver v2 then I'll miss it because it will probably fill up real quick.This might even be more popular than lightsaver or orion cause of the uniqueness of it being one of the only HHKB-styled MX boards that don't use blockers.I expect upwards of 30-40 people wanting to get this.I swear I'm never on time for these sorts of things either. Limited spots wasn't even something I had thought of. That makes me nervous.
I'm going to open the group buy at a random time..............
why does my samurai sound like Japanese Batman?
Quote from: elton5354 on Sun, 20 April 2014, 15:01:33I'm going to open the group buy at a random time.............. Consider your "Show posts" stalked