« previous next »
Pages:  [1]     Go Down

Author Topic: Modding an IBM model M (ISO to ANSI)  (Read 3774 times)

0 Members and 1 Guest are viewing this topic.

Offline Laser

  • Thread Starter
  • Posts: 102
  • Location: euROpe
Modding an IBM model M (ISO to ANSI)
« on: Fri, 14 March 2014, 17:41:43 »
How hard it is to modify an IBM from ISO to ANSI? I just want a longer left shift, and the ANSI enter with the  \| key above. I know i have to bolt mod it or similar (which i intend, anyway).

I don't have much luck (yet) in buying those 3 keys i mentioned above, at a reasonable price (clickykeyboards.com has them cheap, but shipping is more than 24$ to Europe). Anyone have such keys to sell?
(i can't post yet in the classifieds section, either ...). Thanks
Logged

Offline damorgue

  • Posts: 1176
  • Location: Sweden
    • Personal portfolio
Re: Modding an IBM model M (ISO to ANSI)
« Reply #1 on: Fri, 14 March 2014, 17:50:17 »
Is there a particular reason to mod it? Such mods have been made in the past, but I believe mainly on rarer models and models where one or the other standard is less common that the other. If it is just a regular Model M I would suggest you just get an ANSI one instead.
Logged

Offline Laser

  • Thread Starter
  • Posts: 102
  • Location: euROpe
Re: Modding an IBM model M (ISO to ANSI)
« Reply #2 on: Fri, 14 March 2014, 17:55:36 »

It's hard to find an ANSI keyboard on ebay, coming from European Union ...
Logged

Offline fohat.digs

  • * Elevated Elder
  • Posts: 6533
  • Location: 35°55'N, 83°53'W
  • weird funny old guy
Re: Modding an IBM model M (ISO to ANSI)
« Reply #3 on: Fri, 14 March 2014, 18:19:54 »
My guide is about the Model F, but about halfway through I describe how to move springs from ISO to ANSI.

Just do that in reverse.

http://geekhack.org/index.php?topic=48786.msg1122437#msg1122437
Logged
"However, even though I was born in the Mesozoic, I do know what anyone who wants to reach out to young people should say: Billionaires took your money. They took your chance to buy a home. They took your chance at a good education. They stole your opportunities. Billionaires took the things you want in life. If you really want those things, you have to take them back.
That's the message. That's the whole message. Say that every day, not just to reach America's frustrated young white men, but people of every age, race, and gender.
Late-stage capitalism is a wealth-concentration engine, focused on vacuuming up every dollar and putting it in as few hands as possible. Republicans are helping that vacuum suck.
How does a tiny fraction of the population get away with this? They do it by dividing the other 99% of Americans against themselves."
- Marc Sumner 2025-05-30

Offline Laser

  • Thread Starter
  • Posts: 102
  • Location: euROpe
Re: Modding an IBM model M (ISO to ANSI)
« Reply #4 on: Fri, 14 March 2014, 18:30:37 »
I love reading such guides :)

I'd like to mod it for several reasons - i'm VERY used to ANSI keys, i'd like to make sure the keyboard is "future"-proof (solid), and i even think to move it USB (somebody published on a hardware forum i think, the schematics of a replacement controller board) - well maybe not that; and even for a simple reason, to examine it's internals and test for example that floss mod (- at the same time checking if it doesn't have any hidden defects).

(Knowledge, assurance, comfort, experiment)
How well does it all sound - and yet, i need those keys to start with


« Last Edit: Fri, 14 March 2014, 18:35:57 by Laser »
Logged

Offline dorkvader

  • Posts: 6289
  • Location: Boston area
  • all about the "hack" in "geekhack"
Re: Modding an IBM model M (ISO to ANSI)
« Reply #5 on: Fri, 14 March 2014, 18:50:22 »
Quote from: Laser on Fri, 14 March 2014, 18:30:37
I love reading such guides :)

I'd like to mod it for several reasons - i'm VERY used to ANSI keys, i'd like to make sure the keyboard is "future"-proof (solid), and i even think to move it USB (somebody published on a hardware forum i think, the schematics of a replacement controller board) - well maybe not that; and even for a simple reason, to examine it's internals and test for example that floss mod (- at the same time checking if it doesn't have any hidden defects).

(Knowledge, assurance, comfort, experiment)
How well does it all sound - and yet, i need those keys to start with



About replacement controller: there is an interesting post here
http://geekhack.org/index.php?topic=19104.0

I recommend just using a teensy or similar (arduino pro micro?) mounted inside the case running soarer's PS/2 to USB code. You also get programmability.

To convert to ANSI:
1. bolt mod the M
2. get an ANSI enter key (and stabilizer insert) from unicomp or somewhere
3. place hammer in correct place, reassemble and test.
4. ???
5. profit.
Logged

Offline Laser

  • Thread Starter
  • Posts: 102
  • Location: euROpe
Re: Modding an IBM model M (ISO to ANSI)
« Reply #6 on: Fri, 14 March 2014, 19:15:57 »

Nice link!
Pitty my electronic skills are close to none (apart from soldering). Originally i saw this one, for the USB mod: http://mg8.org/rump/ (the "File" section, especially).
I will have some time to decide, this is also a nice part of the process :)
Logged
Pages:  [1]     Go Up
« previous next »