« previous next »
Pages:  [1]     Go Down

Author Topic: Unicomp 122 keys acting up - Anyone had this before?  (Read 2076 times)

0 Members and 1 Guest are viewing this topic.

Offline NAMESPACE

  • Thread Starter
  • Posts: 55
  • Location: BEHIND YOU.
  • YES, I ALWAYS WRITE IN CAPS.
Unicomp 122 keys acting up - Anyone had this before?
« on: Sun, 16 March 2014, 12:39:14 »
Hey everyone,

About six months ago I purchased a unicomp 122. About a week ago I noticed that some of the keys were seriously jacked up, it took almost no force to depress them and they had almost no click or tactile feeling. The weird thing is that they keys in question are not even the ones most used - such as F22 which I have pressed about twice and now feels like a rubber dome.

There seems to be no pattern to it; the * on the keypad. The ; and the _.

Has anyone had this before? I have not yet opened it up to take a peak for fear of making it worse (I don't have much modding experience). All the keys in question still work fine, they just feel like mush and are almost completely silent.

Thanks for you help (or just reading this),

NAMESPACE
Logged

Offline BlueBär

  • Posts: 2231
  • Location: Germany, SB
Re: Unicomp 122 keys acting up - Anyone had this before?
« Reply #1 on: Sun, 16 March 2014, 12:56:15 »
Did you try reseating the keycap? Both parts of it. Check if the spring below still looks fine.
Logged

Offline NAMESPACE

  • Thread Starter
  • Posts: 55
  • Location: BEHIND YOU.
  • YES, I ALWAYS WRITE IN CAPS.
Re: Unicomp 122 keys acting up - Anyone had this before?
« Reply #2 on: Sun, 16 March 2014, 13:03:09 »
Yes - I took several off and swapped to see if that made a difference. All the springs look fine.
Logged

Offline Pacifist

  • Report me *again* if there are gifs in my sig
  • * Elevated Elder
  • Posts: 3599
  • Location: Cali
  • on hiatus
Re: Unicomp 122 keys acting up - Anyone had this before?
« Reply #3 on: Sun, 16 March 2014, 13:06:21 »
Quote from: NAMESPACE on Sun, 16 March 2014, 13:03:09
Yes - I took several off and swapped to see if that made a difference. All the springs look fine.

Its not the springs looking fine, its the springs being seated correctly while the keycap is inserted
Logged

Offline NAMESPACE

  • Thread Starter
  • Posts: 55
  • Location: BEHIND YOU.
  • YES, I ALWAYS WRITE IN CAPS.
Re: Unicomp 122 keys acting up - Anyone had this before?
« Reply #4 on: Sun, 16 March 2014, 13:09:25 »
I think you're right Pacifist; but I already tried that. Do you have any advice on what to do? (in case I did it wrong or whatnot). :)
Logged

Offline BlueBär

  • Posts: 2231
  • Location: Germany, SB
Re: Unicomp 122 keys acting up - Anyone had this before?
« Reply #5 on: Sun, 16 March 2014, 13:14:09 »
Can you take a well lit photo of the spring mechanism with the cap taken off? You can always send it to Unicomp for repairs btw.
Logged

Offline NAMESPACE

  • Thread Starter
  • Posts: 55
  • Location: BEHIND YOU.
  • YES, I ALWAYS WRITE IN CAPS.
Re: Unicomp 122 keys acting up - Anyone had this before?
« Reply #6 on: Sun, 16 March 2014, 13:20:39 »
Yes - I can take a photo (but believe me when I say that I cant see the difference). I could also post it here if anyone wants to see my sexy buckling springs :eek:. I don't want to send it to unicomp because I'm cheap - shipping costs a nightmare.
Logged

Offline BlueBär

  • Posts: 2231
  • Location: Germany, SB
Re: Unicomp 122 keys acting up - Anyone had this before?
« Reply #7 on: Sun, 16 March 2014, 13:25:48 »
Hmm can you see if the pivot plate below might be broken? You can also try to press down the spring with a pen to see what goes wrong. Buckling spring is a fairly simple mechanism so there's not too many things that could be broken.
Logged

Offline NAMESPACE

  • Thread Starter
  • Posts: 55
  • Location: BEHIND YOU.
  • YES, I ALWAYS WRITE IN CAPS.
Re: Unicomp 122 keys acting up - Anyone had this before?
« Reply #8 on: Sun, 16 March 2014, 13:31:12 »
Will do. Give me 5 to perform the operation.
Logged

Offline NAMESPACE

  • Thread Starter
  • Posts: 55
  • Location: BEHIND YOU.
  • YES, I ALWAYS WRITE IN CAPS.
Re: Unicomp 122 keys acting up - Anyone had this before?
« Reply #9 on: Sun, 16 March 2014, 13:36:47 »
Nothing. Everything seems to be fine....
Logged

Offline BlueBär

  • Posts: 2231
  • Location: Germany, SB
Re: Unicomp 122 keys acting up - Anyone had this before?
« Reply #10 on: Sun, 16 March 2014, 13:42:11 »
Very strange. You might have to disassemble it to see what's wrong with it, but there are some people who know a lot more about Buckling Springs than me so I hope they see this topic.
Logged

Offline NAMESPACE

  • Thread Starter
  • Posts: 55
  • Location: BEHIND YOU.
  • YES, I ALWAYS WRITE IN CAPS.
Re: Unicomp 122 keys acting up - Anyone had this before?
« Reply #11 on: Sun, 16 March 2014, 13:44:08 »
Okay - Thanks for your help. I'll post this to unicomp and see what they know and open it up.
Logged

Offline E TwentyNine

  • Posts: 884
    • Some of My Keyboards
Re: Unicomp 122 keys acting up - Anyone had this before?
« Reply #12 on: Sun, 16 March 2014, 18:03:06 »
After you've removed the key (both pieces if it's two piece), when you're putting it back, tilt the keyboard forward so the spring leans forward.

The most common factor in not getting the click is the spring not seating correctly inside the stem. 
Logged
Daily driver: SSK or Tenkeyless IBM AT
1984 Model M Industrial Prototype ⌨ 1992 Black Oval Industrial SSK ⌨ 1982 5251 Beam Spring ⌨ 89 Key "SSK" ⌨ M13 triplets

Offline fohat.digs

  • * Elevated Elder
  • Posts: 6533
  • Location: 35°55'N, 83°53'W
  • weird funny old guy
Re: Unicomp 122 keys acting up - Anyone had this before?
« Reply #13 on: Sun, 16 March 2014, 18:34:09 »
Quote from: E TwentyNine on Sun, 16 March 2014, 18:03:06
After you've removed the key (both pieces if it's two piece), when you're putting it back, tilt the keyboard forward so the spring leans forward.

The most common factor in not getting the click is the spring not seating correctly inside the stem. 


This. You might even hold the keyboard past vertical or almost upside-down.

If you look all the way down into the key stem, there is a dimple in the center. If that dimple is not centered in the spring, it will not feel right.
Logged
"Starting in 2011, the deficits again started to shrink. During Obama’s term  the deficit was reduced by $900 Billion  before finally in 2015 the GOP managed to wrangle a “reconciliation” bill out of Obama where he again cut corporate taxes, as well as made permanent some of George W. Bush’s original tax cuts. This is the year everything reversed. Before this, under Clinton, Bush and Obama the deficit in almost every year was gradually decreasing. The balance we had of taxes and the economy was bringing the deficit down, the money coming in was slowly catching up with the money going out until 2015. Trump’s subsequent tax cut has continued the new trend even after the rest of Bush’s cuts have since expired. Obama had an average GDP of 2.3%, with 11.6 million jobs created and unemployment peaking at 10% in 2009, then falling to 4.3% in 2016. If we had continued on that downward deficit track, we would have again reached balance and another surplus in 2017-2018.
– Frank V Walton 2025-07-01

Offline NAMESPACE

  • Thread Starter
  • Posts: 55
  • Location: BEHIND YOU.
  • YES, I ALWAYS WRITE IN CAPS.
Re: Unicomp 122 keys acting up - Anyone had this before?
« Reply #14 on: Thu, 21 August 2014, 13:58:18 »
It's been about 500 hundred years since I started this thread and I thought that, even given the time the guys who helped me might want some closure about how it all turned out.

The model M is fixed now. Unicomp didn't know what was wrong; but replacing the spring and the thorough cleaning I gave it make it work like new.

I did a once over on the spring and it seems that *nothing* was wrong with it.... I guess some things will always remain a mystery.

Anyway, thanks to everyone who helped advise me what to do.
Logged

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 21175
  • Location: melbourne.vic.au
  • Missed another sale.
Re: Unicomp 122 keys acting up - Anyone had this before?
« Reply #15 on: Fri, 22 August 2014, 20:09:07 »
Thanks for the feedback - it helps people who find this thread in the future and wonder if it worked.

Glad things worked out :)
Logged
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But that’s incorrect. It’s in HHKB’s slogan, but when America’s cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ
Pages:  [1]     Go Up
« previous next »