Author Topic: RAMAGE key Caps-HIBERNATING....... (Read 285785 times)

kawb · « **Reply #300 on:** Mon, 21 March 2016, 14:16:11 »

Just got mine and they are awesome.

romevi · « **Reply #301 on:** Mon, 21 March 2016, 14:38:20 »

Quote from: kawb on Mon, 21 March 2016, 14:16:11

Just got mine and they are awesome.

(Attachment Link)

Wait, are those from the January sale?

Ramage · « **Reply #302 on:** Mon, 21 March 2016, 19:10:01 »

Quote from: romevi on Mon, 21 March 2016, 14:38:20

Quote from: kawb on Mon, 21 March 2016, 14:16:11
Just got mine and they are awesome.

(Attachment Link)

Wait, are those from the January sale?

Something separate!

Ramage · « **Reply #303 on:** Tue, 22 March 2016, 17:16:57 »

Tried using a polishing compound and a buffing wheel on this African Blackwood. No finish of any kind.

HouseofSuffering · « **Reply #304 on:** Tue, 22 March 2016, 17:24:46 »

Nice!

romevi · « **Reply #305 on:** Tue, 22 March 2016, 17:24:54 »

Quote from: Ramage on Tue, 22 March 2016, 17:16:57

Tried using a polishing compound and a buffing wheel on this African Blackwood. No finish of any kind.
(Attachment Link)

That looks really good. This is the same wood you've used before, yes?

Ramage · « **Reply #306 on:** Tue, 22 March 2016, 17:33:35 »

Quote from: romevi on Tue, 22 March 2016, 17:24:54

Quote from: Ramage on Tue, 22 March 2016, 17:16:57
Tried using a polishing compound and a buffing wheel on this African Blackwood. No finish of any kind.
(Attachment Link)

That looks really good. This is the same wood you've used before, yes?

Ya exactly, this just had a few extra steps that really improved the appearance. I'll have to see what oil does to it.

tigersharkdude · « **Reply #307 on:** Tue, 22 March 2016, 17:36:31 »

Quote from: Ramage on Tue, 22 March 2016, 17:16:57

Tried using a polishing compound and a buffing wheel on this African Blackwood. No finish of any kind.
(Attachment Link)

Noice

UsualSuspectXXX · « **Reply #308 on:** Tue, 22 March 2016, 19:41:18 »

Quote from: Ramage on Tue, 22 March 2016, 17:16:57

Tried using a polishing compound and a buffing wheel on this African Blackwood. No finish of any kind.
(Attachment Link)

Dude. This looks awesome! Very nicely done

Ramage · « **Reply #309 on:** Tue, 22 March 2016, 21:55:40 »

In the shade

In the sun

KaminKevCrew · « **Reply #310 on:** Tue, 22 March 2016, 22:54:45 »

Quote from: Ramage on Tue, 22 March 2016, 21:55:40

In the shade
(Attachment Link)

In the sun
(Attachment Link)

Very, very nice!

romevi · « **Reply #311 on:** Tue, 22 March 2016, 22:56:04 »

Quote from: Ramage on Tue, 22 March 2016, 21:55:40

In the shade
(Attachment Link)

In the sun
(Attachment Link)

They look almost like different wood!

rurushu · « **Reply #312 on:** Wed, 23 March 2016, 00:00:18 »

Quote from: Ramage on Tue, 22 March 2016, 21:55:40

In the shade
(Attachment Link)

In the sun
(Attachment Link)

wow... the first one looks kind of metallic-ish!!!

HPE1000 · « **Reply #313 on:** Wed, 23 March 2016, 00:04:03 »

Quote from: Ramage on Tue, 22 March 2016, 21:55:40

In the shade
(Attachment Link)

In the sun
(Attachment Link)

classy

Ramage · « **Reply #314 on:** Wed, 23 March 2016, 01:15:31 »

Ya I was surprised it could change in appearance so much just from the light!

GreyAmbience · « **Reply #315 on:** Wed, 23 March 2016, 03:02:23 »

Quote from: Ramage on Tue, 22 March 2016, 21:55:40

In the shade
(Attachment Link)

In the sun
(Attachment Link)

Holy **** they are beautiful.
Please tell me you have a whole board with these your self

mrbishop · « **Reply #316 on:** Thu, 24 March 2016, 10:36:27 »

you Sir have some tiny endmills.... i need to step up my ball end mill game -_-

what size do you use if you dont mind me asking?

Ramage · « **Reply #317 on:** Thu, 24 March 2016, 13:23:47 »

Quote from: mrbishop on Thu, 24 March 2016, 10:36:27

you Sir have some tiny endmills.... i need to step up my ball end mill game -_-

what size do you use if you dont mind me asking?

Not at all, I love talking about endmills!

My bread and butter for small stuff is a .0435 PCB endmill and a 1/32" ball endmill. I also have a 1/64" ball endmill but I haven't had a chance to use it yet!

mrbishop · « **Reply #318 on:** Thu, 24 March 2016, 13:29:26 »

Quote from: Ramage on Thu, 24 March 2016, 13:23:47

Quote from: mrbishop on Thu, 24 March 2016, 10:36:27
you Sir have some tiny endmills.... i need to step up my ball end mill game -_-

what size do you use if you dont mind me asking?

Not at all, I love talking about endmills!

My bread and butter for small stuff is a .0435 PCB endmill and a 1/32" ball endmill. I also have a 1/64" ball endmill but I haven't had a chance to use it yet!
(Attachment Link)

Niiiice smallest I have is a 2 flute 3/32 flat and 1/8 ball. Just for some pcb drills bits so u have some tiny ones but they aren't foe milling

Ramage · « **Reply #319 on:** Thu, 24 March 2016, 13:44:46 »

Quote from: mrbishop on Thu, 24 March 2016, 13:29:26

Quote from: Ramage on Thu, 24 March 2016, 13:23:47
Quote from: mrbishop on Thu, 24 March 2016, 10:36:27
you Sir have some tiny endmills.... i need to step up my ball end mill game -_-

what size do you use if you dont mind me asking?

Not at all, I love talking about endmills!

My bread and butter for small stuff is a .0435 PCB endmill and a 1/32" ball endmill. I also have a 1/64" ball endmill but I haven't had a chance to use it yet!
(Attachment Link)
Niiiice smallest I have is a 2 flute 3/32 flat and 1/8 ball. Just for some pcb drills bits so u have some tiny ones but they aren't foe milling

Ya I'm pretty gentle with the ball endmills because they're expensive but they still F#@$^*# break! So if you buy some smaller ones, be careful

mrbishop · « **Reply #320 on:** Thu, 24 March 2016, 13:47:27 »

Quote from: Ramage on Thu, 24 March 2016, 13:44:46

Quote from: mrbishop on Thu, 24 March 2016, 13:29:26
Quote from: Ramage on Thu, 24 March 2016, 13:23:47
Quote from: mrbishop on Thu, 24 March 2016, 10:36:27
you Sir have some tiny endmills.... i need to step up my ball end mill game -_-

what size do you use if you dont mind me asking?

Not at all, I love talking about endmills!

My bread and butter for small stuff is a .0435 PCB endmill and a 1/32" ball endmill. I also have a 1/64" ball endmill but I haven't had a chance to use it yet!
(Attachment Link)
Niiiice smallest I have is a 2 flute 3/32 flat and 1/8 ball. Just for some pcb drills bits so u have some tiny ones but they aren't foe milling

Ya I'm pretty gentle with the ball endmills because they're expensive but they still F#@$^*# break! So if you buy some smaller ones, be careful

Oh I have broken my fair share of bits. I bet those cap cut jobs are loooooong. Your IPM must be pretty slow to get a finish like that. I'm doing a Linux cnc upgrade on my grbl arduino cnc over the next few weeks. I need more stability in motion controller.

Ramage · « **Reply #321 on:** Thu, 24 March 2016, 15:52:38 »

Quote from: mrbishop on Thu, 24 March 2016, 13:47:27

Quote from: Ramage on Thu, 24 March 2016, 13:44:46
Quote from: mrbishop on Thu, 24 March 2016, 13:29:26
Quote from: Ramage on Thu, 24 March 2016, 13:23:47
Quote from: mrbishop on Thu, 24 March 2016, 10:36:27
you Sir have some tiny endmills.... i need to step up my ball end mill game -_-

what size do you use if you dont mind me asking?

Not at all, I love talking about endmills!

My bread and butter for small stuff is a .0435 PCB endmill and a 1/32" ball endmill. I also have a 1/64" ball endmill but I haven't had a chance to use it yet!
(Attachment Link)
Niiiice smallest I have is a 2 flute 3/32 flat and 1/8 ball. Just for some pcb drills bits so u have some tiny ones but they aren't foe milling

Ya I'm pretty gentle with the ball endmills because they're expensive but they still F#@$^*# break! So if you buy some smaller ones, be careful
Oh I have broken my fair share of bits. I bet those cap cut jobs are loooooong. Your IPM must be pretty slow to get a finish like that. I'm doing a Linux cnc upgrade on my grbl arduino cnc over the next few weeks. I need more stability in motion controller.

They do take quite a while to cut but most of the work on the caps is done by hand. Out of the machine they don't look to hot and some wood looks plain terrible. The wood's finish comes from 7 sanding steps followed by a good amount of polishing. I'll probably post about the process sometime soon.

mrbishop · « **Reply #322 on:** Thu, 24 March 2016, 15:53:56 »

Quote from: Ramage on Thu, 24 March 2016, 15:52:38

Quote from: mrbishop on Thu, 24 March 2016, 13:47:27
Quote from: Ramage on Thu, 24 March 2016, 13:44:46
Quote from: mrbishop on Thu, 24 March 2016, 13:29:26
Quote from: Ramage on Thu, 24 March 2016, 13:23:47
Quote from: mrbishop on Thu, 24 March 2016, 10:36:27
you Sir have some tiny endmills.... i need to step up my ball end mill game -_-

what size do you use if you dont mind me asking?

Not at all, I love talking about endmills!

My bread and butter for small stuff is a .0435 PCB endmill and a 1/32" ball endmill. I also have a 1/64" ball endmill but I haven't had a chance to use it yet!
(Attachment Link)
Niiiice smallest I have is a 2 flute 3/32 flat and 1/8 ball. Just for some pcb drills bits so u have some tiny ones but they aren't foe milling

Ya I'm pretty gentle with the ball endmills because they're expensive but they still F#@$^*# break! So if you buy some smaller ones, be careful
Oh I have broken my fair share of bits. I bet those cap cut jobs are loooooong. Your IPM must be pretty slow to get a finish like that. I'm doing a Linux cnc upgrade on my grbl arduino cnc over the next few weeks. I need more stability in motion controller.

They do take quite a while to cut but most of the work on the caps is done by hand. Out of the machine they don't look to hot and some wood looks plain terrible. The wood's finish comes from 7 sanding steps followed by a good amount of polishing. I'll probably post about the process sometime soon.

Nice. I have some ipe purple hear and rasamando I need to do something with lol

Ramage · « **Reply #323 on:** Thu, 24 March 2016, 16:18:37 »

What's new?

Dark Water, Bocote, and Aquafresh.

tigersharkdude · « **Reply #324 on:** Thu, 24 March 2016, 16:23:00 »

Quote from: Ramage on Thu, 24 March 2016, 16:18:37

What's new?

Dark Water, Bocote, and Aquafresh.

(Attachment Link)

hnnnnnnng

romevi · « **Reply #325 on:** Thu, 24 March 2016, 16:30:25 »

Quote from: Ramage on Thu, 24 March 2016, 16:18:37

What's new?

Dark Water, Bocote, and Aquafresh.

(Attachment Link)

ohmygosh ohmygosh ohmygosh

That one on the far left just brought a flurry of nostalgia. It reminds me of my childhood home and the '90s; our house at the time was decorated heavily with that black marble look, primarily in the living room. I completely forgot about it, and that cap just brought a surge of memories.

UsualSuspectXXX · « **Reply #326 on:** Thu, 24 March 2016, 17:34:26 »

Quote from: Ramage on Thu, 24 March 2016, 16:18:37

What's new?

Dark Water, Bocote, and Aquafresh.

(Attachment Link)

Dat Aquafresh yo. Dope!

Krytone · « **Reply #327 on:** Thu, 24 March 2016, 20:57:26 »

Quote from: UsualSuspectXXX on Thu, 24 March 2016, 17:34:26

Quote from: Ramage on Thu, 24 March 2016, 16:18:37
What's new?

Dark Water, Bocote, and Aquafresh.

(Attachment Link)

Dat Aquafresh yo. Dope!

+1
Would like getting one of this.

UsualSuspectXXX · « **Reply #328 on:** Thu, 24 March 2016, 21:13:35 »

Quote from: Krytone on Thu, 24 March 2016, 20:57:26

Quote from: UsualSuspectXXX on Thu, 24 March 2016, 17:34:26
Quote from: Ramage on Thu, 24 March 2016, 16:18:37
What's new?

Dark Water, Bocote, and Aquafresh.

(Attachment Link)

Dat Aquafresh yo. Dope!
+1
Would like getting one of this.

Definitely a very interesting design.

dohbot · « **Reply #329 on:** Thu, 24 March 2016, 21:39:53 »

That's so cool!

Krytone · « **Reply #330 on:** Thu, 24 March 2016, 21:40:35 »

Quote from: UsualSuspectXXX on Thu, 24 March 2016, 21:13:35

Quote from: Krytone on Thu, 24 March 2016, 20:57:26
Quote from: UsualSuspectXXX on Thu, 24 March 2016, 17:34:26
Quote from: Ramage on Thu, 24 March 2016, 16:18:37
What's new?

Dark Water, Bocote, and Aquafresh.

(Attachment Link)

Dat Aquafresh yo. Dope!
+1
Would like getting one of this.

Definitely a very interesting design.

and material. its definitely a keeper

UsualSuspectXXX · « **Reply #331 on:** Thu, 24 March 2016, 21:42:35 »

Quote from: Krytone on Thu, 24 March 2016, 21:40:35

Quote from: UsualSuspectXXX on Thu, 24 March 2016, 21:13:35
Quote from: Krytone on Thu, 24 March 2016, 20:57:26
Quote from: UsualSuspectXXX on Thu, 24 March 2016, 17:34:26
Quote from: Ramage on Thu, 24 March 2016, 16:18:37
What's new?

Dark Water, Bocote, and Aquafresh.

(Attachment Link)

Dat Aquafresh yo. Dope!
+1
Would like getting one of this.

Definitely a very interesting design.
and material. its definitely a keeper

Very good point. Do we know what the actual material is yet?

Krytone · « **Reply #332 on:** Thu, 24 March 2016, 22:33:58 »

Quote from: UsualSuspectXXX on Thu, 24 March 2016, 21:42:35

Quote from: Krytone on Thu, 24 March 2016, 21:40:35
Quote from: UsualSuspectXXX on Thu, 24 March 2016, 21:13:35
Quote from: Krytone on Thu, 24 March 2016, 20:57:26
Quote from: UsualSuspectXXX on Thu, 24 March 2016, 17:34:26
Quote from: Ramage on Thu, 24 March 2016, 16:18:37
What's new?

Dark Water, Bocote, and Aquafresh.

(Attachment Link)

Dat Aquafresh yo. Dope!
+1
Would like getting one of this.

Definitely a very interesting design.
and material. its definitely a keeper

Very good point. Do we know what the actual material is yet?

I think its the same as the prototype using inlace acrylester but im not sure. Maybe if its possible to have teal and pink would be awesome too. some wishful thinking i guess

)

UsualSuspectXXX · « **Reply #333 on:** Thu, 24 March 2016, 22:43:55 »

Quote from: Krytone on Thu, 24 March 2016, 22:33:58

Quote from: UsualSuspectXXX on Thu, 24 March 2016, 21:42:35
Quote from: Krytone on Thu, 24 March 2016, 21:40:35
Quote from: UsualSuspectXXX on Thu, 24 March 2016, 21:13:35
Quote from: Krytone on Thu, 24 March 2016, 20:57:26
Quote from: UsualSuspectXXX on Thu, 24 March 2016, 17:34:26
Quote from: Ramage on Thu, 24 March 2016, 16:18:37
What's new?

Dark Water, Bocote, and Aquafresh.

(Attachment Link)

Dat Aquafresh yo. Dope!
+1
Would like getting one of this.

Definitely a very interesting design.
and material. its definitely a keeper

Very good point. Do we know what the actual material is yet?
I think its the same as the prototype using inlace acrylester but im not sure. Maybe if its possible to have teal and pink would be awesome too. some wishful thinking i guess )

Hey, one can always wish! And you're probably right about the material. That would make the most sense.

Ramage · « **Reply #334 on:** Fri, 25 March 2016, 02:57:43 »

You are correct! Left and right caps are both inlace acrylester.

UsualSuspectXXX · « **Reply #335 on:** Fri, 25 March 2016, 06:04:03 »

Quote from: Ramage on Fri, 25 March 2016, 02:57:43

You are correct! Left and right caps are both inlace acrylester.

Sweet. Thanks for confirming.

GreyAmbience · « **Reply #336 on:** Fri, 25 March 2016, 14:32:19 »

Sale soon pretty please?

romevi · « **Reply #337 on:** Sun, 27 March 2016, 22:51:22 »

Happy Easter!
X-posting...

Ramage · « **Reply #338 on:** Mon, 28 March 2016, 01:18:05 »

Quote from: romevi on Sun, 27 March 2016, 22:51:22

Happy Easter!
X-posting...

(Attachment Link)

Happy Easter! Thanks for sharing! Your photo makes me want to post a photo so here is a teaser

GreyAmbience · « **Reply #339 on:** Mon, 28 March 2016, 15:52:29 »

Quote from: Ramage on Mon, 28 March 2016, 01:18:05

Quote from: romevi on Sun, 27 March 2016, 22:51:22
Happy Easter!
X-posting...

(Attachment Link)
Happy Easter! Thanks for sharing! Your photo makes me want to post a photo so here is a teaser

(Attachment Link)

Wow! Super spacy!

romevi · « **Reply #340 on:** Mon, 28 March 2016, 15:56:53 »

Quote from: Ramage on Mon, 28 March 2016, 01:18:05

Quote from: romevi on Sun, 27 March 2016, 22:51:22
Happy Easter!
X-posting...

(Attachment Link)
Happy Easter! Thanks for sharing! Your photo makes me want to post a photo so here is a teaser

(Attachment Link)

Looking better and better with every shot!

FLFisherman · « **Reply #341 on:** Mon, 28 March 2016, 15:58:55 »

Quote from: Ramage on Mon, 28 March 2016, 01:18:05

Quote from: romevi on Sun, 27 March 2016, 22:51:22
Happy Easter!
X-posting...

(Attachment Link)
Happy Easter! Thanks for sharing! Your photo makes me want to post a photo so here is a teaser

(Attachment Link)

That is some fantastic marbling.

Dernubenfrieken · « **Reply #342 on:** Tue, 29 March 2016, 06:43:55 »

Love the idea of that material for caps. Seems like it would have a great look and feel. Definitely interested!

rioc · « **Reply #343 on:** Wed, 30 March 2016, 16:59:44 »

these caps look great

would love to obtain one of those

jkhaines · « **Reply #344 on:** Thu, 31 March 2016, 16:01:54 »

Quote from: Ramage on Thu, 24 March 2016, 16:18:37

What's new?

Dark Water, Bocote, and Aquafresh.

(Attachment Link)

Give me that Aquafresh.

tigersharkdude · « **Reply #345 on:** Thu, 31 March 2016, 16:36:52 »

something is coming^TM

Ramage · « **Reply #346 on:** Fri, 01 April 2016, 01:04:03 »

The M.A.D.A.M.E. Sale is live

. See OP for details

Krytone · « **Reply #347 on:** Fri, 01 April 2016, 01:08:15 »

entered! hope to win an aquafresh!

dohbot · « **Reply #348 on:** Fri, 01 April 2016, 01:16:47 »

Who was the first entry

Krytone · « **Reply #349 on:** Fri, 01 April 2016, 01:38:26 »

Quote from: dohbot on Fri, 01 April 2016, 01:16:47

Who was the first entry

is it autowin for first entry? lol

News:

Author Topic: RAMAGE key Caps-HIBERNATING....... (Read 285785 times)