Author Topic: Tried my hand at vinyl wrapping my QFR  (Read 10278 times)

0 Members and 1 Guest are viewing this topic.

Offline kroms

  • Thread Starter
  • Posts: 3
Tried my hand at vinyl wrapping my QFR
« on: Fri, 12 February 2016, 21:16:18 »
Used turquoise vinyl to match my Miami key set.
Loved the way it turned out for how quickly I went over it.  I might re-do it to perfect some of the internal edges and the corners.

128077-0
128079-1

Offline rowdy

  • HHKB Hapster
  • Posts: 22386
  • Location: melbourne.vic.au
  • Missed another sale.
Re: Tried my hand at vinyl wrapping my QFR
« Reply #1 on: Sat, 13 February 2016, 17:35:31 »
Welcome to Geekhack!

That looks great!  Can't see any gaps or creases or anything!

Fantastic match for the keyset too :)

Did it take you long to do?
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But thatís incorrect. Itís in HHKBís slogan, but when Americaís cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Offline kroms

  • Thread Starter
  • Posts: 3
Re: Tried my hand at vinyl wrapping my QFR
« Reply #2 on: Sun, 14 February 2016, 11:47:57 »
Thanks! Finally took the time to register.

Thank you.  I wasn't sure if it would match based on the pictures on amazon, but I took a chance and it turned out pretty good! 
I tried really hard to get a few creases out. The vinyl was giving me a tough time staying straight and not folding on itself. There's some defects on the inside of the key holes, but they are hard to notice.

It took me about 45 minutes to do.  I took the vinyl, pulled the backing off and stuck the case face down and worked my way from there folding the outer sides on.  Honestly, this was the most difficult part.  There's some folds around the corners, but they don't look as bad as I expected.

Offline rowdy

  • HHKB Hapster
  • Posts: 22386
  • Location: melbourne.vic.au
  • Missed another sale.
Re: Tried my hand at vinyl wrapping my QFR
« Reply #3 on: Sun, 14 February 2016, 19:39:06 »
Did you sand the rubber coating off the case first?
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But thatís incorrect. Itís in HHKBís slogan, but when Americaís cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Offline kroms

  • Thread Starter
  • Posts: 3
Re: Tried my hand at vinyl wrapping my QFR
« Reply #4 on: Sun, 14 February 2016, 20:11:45 »
Nope. No sanding.  I didn't even clean it. Although I've only owned it for about a week so it was very clean.

Offline rowdy

  • HHKB Hapster
  • Posts: 22386
  • Location: melbourne.vic.au
  • Missed another sale.
Re: Tried my hand at vinyl wrapping my QFR
« Reply #5 on: Mon, 15 February 2016, 03:42:44 »
Nope. No sanding.  I didn't even clean it. Although I've only owned it for about a week so it was very clean.

Fair enough!

Be interesting to see whether the wrap unsticks at some stage.  My QFR and QFS tend to soak up oil from my fingers around the arrow cluster and just below the function keys where I tend to rest my fingers when I'm thinking.
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But thatís incorrect. Itís in HHKBís slogan, but when Americaís cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Offline iLLucionist

  • * Elevated Elder
  • Posts: 2269
  • Location: Netherlands
  • Topre is Love.
Re: Tried my hand at vinyl wrapping my QFR
« Reply #6 on: Mon, 18 April 2016, 12:23:54 »
Looks metallic even. That is a VERY unique board you got there, really nice color combo. Really pops.

Looks a bit like this to me (color desktop on GEM / Atari):

134746-0
MJT2 Browns o-rings - HHKB White - ES-87 Smoke White Clears - 87UB 55g