Author Topic: [GB] JD45 KEYBOARD PRE-ORDERS [Closed]  (Read 80349 times)

0 Members and 1 Guest are viewing this topic.

Offline STARLORDCOFFEE

  • Posts: 152
  • Location: Irvine, CA
  • GOLD BABY
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #150 on: Wed, 09 March 2016, 14:32:17 »
I don't do DSA.  :(

HEY !!

Right now , JD45 X DSA Profile keycap

Show Image
ZE9H0002 by bullock wu, 於 Flickr

Show Image
ZE9H0004 by bullock wu, 於 Flickr

Show Image
ZE9H0009 by bullock wu, 於 Flickr

Show Image
ZE9H0010 by bullock wu, 於 Flickr

Thanks JD !!

There needs to be a pornographic disclaimer for your pictures  :p I think you just killed the JD45 game and they haven't even shipped yet :))
        
       Model M              BL82          JD45          HHKB        RF

Offline SlamnFunc

  • Posts: 7
  • Location: have you seen the moon
  • Change is inevitable
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #151 on: Thu, 10 March 2016, 05:33:36 »
I don't do DSA.  :(

HEY !!

Right now , JD45 X DSA Profile keycap

Show Image
ZE9H0002 by bullock wu, 於 Flickr

Show Image
ZE9H0004 by bullock wu, 於 Flickr

Show Image
ZE9H0009 by bullock wu, 於 Flickr

Show Image
ZE9H0010 by bullock wu, 於 Flickr

Thanks JD !!

There needs to be a pornographic disclaimer for your pictures  :p I think you just killed the JD45 game and they haven't even shipped yet :))

This is end game stuff.
The design is sublime, would love to see some side on pictures of the 2 case styles.
I am having difficulty deciding on blocked or square corner case.  :-\
The pictures from JD and Justin have been awesome :thumb:
Thanks for all the work done here JD.
« Last Edit: Thu, 17 March 2016, 21:23:54 by SlamnFunc »

Offline absyrd

  • CPT HYPE PADAWAN
  • Posts: 3057
  • Location: Philly Burbs
  • HHKB4LYFE
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #152 on: Thu, 10 March 2016, 05:36:41 »
Damn this thing is coming out great.

Honestly the first time I think owning many keysets comes in handy; you can show everyone what they want.

More pics. More orders!
My wife I a also push her button . But now she have her button push by a different men. So I buy a keyboard a mechanicale, she a reliable like a Fiat.

Offline jdcarpe

  • * Curator
  • Thread Starter
  • Posts: 8856
  • Location: Odessa, TX
  • Live long, and prosper.
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #153 on: Thu, 10 March 2016, 08:33:11 »
I don't do DSA.  :(

HEY !!

Right now , JD45 X DSA Profile keycap

Show Image
ZE9H0002 by bullock wu, 於 Flickr

Show Image
ZE9H0004 by bullock wu, 於 Flickr

Show Image
ZE9H0009 by bullock wu, 於 Flickr

Show Image
ZE9H0010 by bullock wu, 於 Flickr

Thanks JD !!

Thank you, Justin, for the awesome photos of the JD45 with Granite!!


And here is Green Tea:

KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline SlamnFunc

  • Posts: 7
  • Location: have you seen the moon
  • Change is inevitable
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #154 on: Mon, 14 March 2016, 07:18:49 »
I don't do DSA.  :(

HEY !!

Right now , JD45 X DSA Profile keycap

Show Image
ZE9H0002 by bullock wu, 於 Flickr

Show Image
ZE9H0004 by bullock wu, 於 Flickr

Show Image
ZE9H0009 by bullock wu, 於 Flickr

Show Image
ZE9H0010 by bullock wu, 於 Flickr

Thanks JD !!

Thank you, Justin, for the awesome photos of the JD45 with Granite!!


And here is Green Tea:

Show Image


Hey JD, I am wondering if you have the dimensions of the case/keyboard?
I want to compare the size to my HHKB.
Also could I request some side on and front/back pictures of the different case styles especially the blocked corners case?
I'm still undecided, need a nudge.
Cheers

Offline theM

  • Posts: 2
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #155 on: Tue, 15 March 2016, 08:35:06 »
Thanks for this wonderful offer, the keyboard looks terrific. I never heard of a 40% keyboard before, but are amazed by the pictures and are just about to buy.
Sorry to ask this, but I never got this clear, despite reading this thread over and over:
1.) When I buy this keyboard from http://jd45.carpekeyboards.com/ and want the keyboard like in
     http://i.imgur.com/FwNaBhCl.jpg, then I have to order "Square Corners"; is this correct?
2.) When I buy the keyboard "assembled" (which is what I like to do), is the layout like in
     http://i.imgur.com/FwNaBhCl.jpg
     or like in
     http://i.imgur.com/z5cyBTE.png
     ? The difference is the upper right key (BS oder /|). I can live with both, but would prefer the second.
3.) Is the "assembled" keyboard ready to be plugged in and typed on right ahead, or is it just
     assembled with the software still missing. I.e. can I use the keyboard immediately, or do I have to
     do some programming job before I can use it.
Thanks in advance for clarifying this, I hope my coming order can be handled in time.
Many greetings,
theM
     

Offline jdcarpe

  • * Curator
  • Thread Starter
  • Posts: 8856
  • Location: Odessa, TX
  • Live long, and prosper.
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #156 on: Tue, 15 March 2016, 09:21:27 »
Thanks for this wonderful offer, the keyboard looks terrific. I never heard of a 40% keyboard before, but are amazed by the pictures and are just about to buy.
Sorry to ask this, but I never got this clear, despite reading this thread over and over:
1.) When I buy this keyboard from http://jd45.carpekeyboards.com/ and want the keyboard like in
     http://i.imgur.com/FwNaBhCl.jpg, then I have to order "Square Corners"; is this correct?
2.) When I buy the keyboard "assembled" (which is what I like to do), is the layout like in
     http://i.imgur.com/FwNaBhCl.jpg
     or like in
     http://i.imgur.com/z5cyBTE.png
     ? The difference is the upper right key (BS oder /|). I can live with both, but would prefer the second.
3.) Is the "assembled" keyboard ready to be plugged in and typed on right ahead, or is it just
     assembled with the software still missing. I.e. can I use the keyboard immediately, or do I have to
     do some programming job before I can use it.
Thanks in advance for clarifying this, I hope my coming order can be handled in time.
Many greetings,
theM
   
1) Yes, that is the "square corners" version
2) It's like the second image. I decided to change the order of that key, but don't have a new keycap sample of it
3) It will be ready to run, with a default firmware installed

Thanks for your support!




Get those last minute orders in, folks.  Pre-orders close in just four days.
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline WNovizar

  • Posts: 382
  • Location: Indonesia
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #157 on: Tue, 15 March 2016, 09:40:29 »
Hello JD, Just wanna ask is this layout below is available for JD45?

http://www.keyboard-layout-editor.com/#/gists/00232dd383258db27c2c
I like mechanical keyboards

Offline jdcarpe

  • * Curator
  • Thread Starter
  • Posts: 8856
  • Location: Odessa, TX
  • Live long, and prosper.
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #158 on: Tue, 15 March 2016, 09:50:57 »
Hello JD, Just wanna ask is this layout below is available for JD45?

http://www.keyboard-layout-editor.com/#/gists/00232dd383258db27c2c
Your link isn't working for me, but that may be because I'm on mobile today, traveling for my day job.

Can you post a screenshot instead?
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline WNovizar

  • Posts: 382
  • Location: Indonesia
I like mechanical keyboards

Offline jdcarpe

  • * Curator
  • Thread Starter
  • Posts: 8856
  • Location: Odessa, TX
  • Live long, and prosper.
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #160 on: Tue, 15 March 2016, 10:05:46 »
How about this?

https://drive.google.com/file/d/0B1ZMt8BaKcx7cTlSQ285WnVGNnc/view?usp=sharing
Ah, better, thank you.

No, there isn't a hole for a 1.5u key in the left corner. You COULD do 1.25-1.25-1.00-6.00-1.00-1.25-1.25 though.
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline pnh2389

  • Posts: 10
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #161 on: Tue, 15 March 2016, 11:03:18 »
Hi, I have a question about ordering.

What forms of payment are you accepting?

From a snippet I read in this thread, it suggest you are processing through PayPal. I don't have a PayPal account; will I have to create one in order to make payment or are there other methods? ie. credit card

Offline jdcarpe

  • * Curator
  • Thread Starter
  • Posts: 8856
  • Location: Odessa, TX
  • Live long, and prosper.
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #162 on: Tue, 15 March 2016, 11:05:07 »
Hi, I have a question about ordering.

What forms of payment are you accepting?

From a snippet I read in this thread, it suggest you are processing through PayPal. I don't have a PayPal account; will I have to create one in order to make payment or are there other methods? ie. credit card

I don't think you have to create a PayPal account in order to pay using a credit card. The billing is done via PayPal on my end, but you can pay with your credit card without a PayPal account.
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline jdcarpe

  • * Curator
  • Thread Starter
  • Posts: 8856
  • Location: Odessa, TX
  • Live long, and prosper.
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #163 on: Tue, 15 March 2016, 11:07:57 »
Hello JD, Just wanna ask is this layout below is available for JD45?

http://www.keyboard-layout-editor.com/#/gists/00232dd383258db27c2c

Were you talking about the physical layout? Or the keymap programming? Because I'm pretty sure you can program it exactly like that, if you want, using metalliqaz' Easy AVR firmware.
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline WNovizar

  • Posts: 382
  • Location: Indonesia
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #164 on: Tue, 15 March 2016, 11:11:09 »
Physically, I could remap them with software, I am just curious about my designated bottom layout, i.e 1.5-1-1-6-1-1-1.5. So I can only do 1.25-1-1-6-1-1-1.25?
I like mechanical keyboards

Offline jdcarpe

  • * Curator
  • Thread Starter
  • Posts: 8856
  • Location: Odessa, TX
  • Live long, and prosper.
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #165 on: Tue, 15 March 2016, 11:16:49 »
You would use two 1.25's, instead of a 1.5 and a 1, like this:



« Last Edit: Tue, 15 March 2016, 11:20:03 by jdcarpe »
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline justin.wu

  • * Commercial Vendor
  • Posts: 90
  • Location: Taiwan
  • Less is more
    • TEX
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #166 on: Thu, 17 March 2016, 05:02:15 »
Hello !!

Post new photo !!

ZE9H0013 by bullock wu, 於 Flickr

ZE9H0014 by bullock wu, 於 Flickr

ZE9H0015 by bullock wu, 於 Flickr

ZE9H0016 by bullock wu, 於 Flickr

make different

Offline swimmingbird

  • * Elevated Elder
  • Posts: 2119
  • Location: Sydney, Australia
  • keyset hoarder
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #167 on: Thu, 17 March 2016, 07:18:54 »
why haven't i ordered one of these yet

Offline jdcarpe

  • * Curator
  • Thread Starter
  • Posts: 8856
  • Location: Odessa, TX
  • Live long, and prosper.
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #168 on: Thu, 17 March 2016, 08:27:43 »
why haven't i ordered one of these yet

I DON'T KNOW!?!?!



Get those orders in now, folks. Only 2 more days!!!

http://jd45.carpekeyboards.com
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline swimmingbird

  • * Elevated Elder
  • Posts: 2119
  • Location: Sydney, Australia
  • keyset hoarder
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #169 on: Thu, 17 March 2016, 08:28:24 »

why haven't i ordered one of these yet

I DON'T KNOW!?!?!



Get those orders in now, folks. Only 2 more days!!!

http://jd45.carpekeyboards.com

Plan on fixing it real soon :)

Offline eyedrop

  • Posts: 319
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #170 on: Thu, 17 March 2016, 16:07:03 »
Just ordered mine (or paid for it).  It was hard to pick a version.  Ultimately went with the blocked version....aka hhkb style.  Can't wait!

jdcarpe, good job in making something like this happen.

Offline jdcarpe

  • * Curator
  • Thread Starter
  • Posts: 8856
  • Location: Odessa, TX
  • Live long, and prosper.
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #171 on: Fri, 18 March 2016, 18:41:52 »
Only 24 hours left to get your last minute orders and/or payments in. It's the final stretch! Let's put this one over the top.
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline MechanicalCafe

  • Posts: 7
  • Location: SF, California
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #172 on: Fri, 18 March 2016, 20:51:27 »
this will be my first 40% :D
went with a black rectangle MX DIY, going to throw 78g zealios on it i think

Does the DIY option include keycaps?
No, it is supposed to be a 'barebones' type kit. I assume people will want to bring their own switches and keycaps.

I am thinking about offering a keycap group buy after the keyboard group buy ends.

I want to get the DIY kit to solder LEDs but, is there some way to get  those keycaps close to the ship date?
I don't have the correct keycaps to cover this board and it would be nice to have the ones that are labeled  :thumb:

Offline jdcarpe

  • * Curator
  • Thread Starter
  • Posts: 8856
  • Location: Odessa, TX
  • Live long, and prosper.
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #173 on: Fri, 18 March 2016, 22:03:12 »
I'm still weighing options for what to do about keycaps. I'm sure I will be offering something tailored to the JD45 in the near future, but I don't like to have too many things going at once. :)
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline Willyc277

  • Posts: 373
  • Location: Louisiana USA
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #174 on: Fri, 18 March 2016, 22:32:32 »
Show Image

Silver case, blocked corners, with ROUND 5 / HONEY keycaps.

Swore off SA caps a few years ago, but that setup just looks . . . RIGHT.  :eek:  I don't know how to describe it, but that pic really does something to me. I've got way too many boards at the moment... Or maybe not. I'll think it over tonight.


Uuuugh.

Offline Tre3Cycl3S

  • Posts: 60
  • Location: Canada
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #175 on: Sat, 19 March 2016, 01:05:20 »
I checked, double checked and tripled checked to make sure I made the payments. Can't wait until this board gets here!
                                           
      QFR             HHKB Pro-2          JD45                 VE.A              XMIT 61-Key             JD40 Mk.II               V60 Mini       Realforce 87U          M65-A                 Custom
   MX Blue            45g Topre         MX Blue        R5 67g Zealios     50g Hall Effect     Modded Gateron Red     Matias Click        55g Topre       R5 78g Zealios      62g Ergo Grey

Offline Pemdas

  • Posts: 549
  • Location: Vancouver, WA
  • (づ ̄  ̄)づ ᶠᶫᵒᵃᵗᶦᶰᵍ ᶫᶦᵏᵉ ᵃ ᵇᵘᵗᵗᵉʳᶠᶫʸ
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #176 on: Sat, 19 March 2016, 17:48:41 »
Cutting it close but finally joined and paid  :cool:

Really wasn't sure if I was going to join or not but I love small keyboards too much to miss this! Thanks jd and can't wait to try these bad boys out :thumb:
Current Daily Driver: Blue Mira SE w/ Tealios

Offline WNovizar

  • Posts: 382
  • Location: Indonesia
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #177 on: Tue, 22 March 2016, 02:27:00 »
Cutting it close but finally joined and paid  :cool:

Really wasn't sure if I was going to join or not but I love small keyboards too much to miss this! Thanks jd and can't wait to try these bad boys out :thumb:


So what is the status on this GB? it's already closed right?
I like mechanical keyboards

Offline jdcarpe

  • * Curator
  • Thread Starter
  • Posts: 8856
  • Location: Odessa, TX
  • Live long, and prosper.
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #178 on: Fri, 25 March 2016, 14:18:45 »
Cutting it close but finally joined and paid  :cool:

Really wasn't sure if I was going to join or not but I love small keyboards too much to miss this! Thanks jd and can't wait to try these bad boys out :thumb:


So what is the status on this GB? it's already closed right?

Yes, the GB ordering phase is closed. I want to thank everyone for their orders and prompt payments!

Now the pre-orders are being sent to manufacture. Once they are complete, they will be shipped to me for distribution to all the buyers.
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline tuco

  • Posts: 77
  • Location: Kansas
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #179 on: Fri, 25 March 2016, 15:14:51 »
Thanks for the update, looking forward to it.

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8267
  • Location: The Windy City
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #180 on: Fri, 25 March 2016, 15:55:48 »
Cutting it close but finally joined and paid  :cool:

Really wasn't sure if I was going to join or not but I love small keyboards too much to miss this! Thanks jd and can't wait to try these bad boys out :thumb:


So what is the status on this GB? it's already closed right?

Yes, the GB ordering phase is closed. I want to thank everyone for their orders and prompt payments!

Now the pre-orders are being sent to manufacture. Once they are complete, they will be shipped to me for distribution to all the buyers.

...And then a second round?  :thumb:

Online ipreferpie

  • Posts: 150
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #181 on: Sat, 26 March 2016, 09:33:22 »
Cutting it close but finally joined and paid  8)

Really wasn't sure if I was going to join or not but I love small keyboards too much to miss this! Thanks jd and can't wait to try these bad boys out :thumb:


So what is the status on this GB? it's already closed right?

Yes, the GB ordering phase is closed. I want to thank everyone for their orders and prompt payments!

Now the pre-orders are being sent to manufacture. Once they are complete, they will be shipped to me for distribution to all the buyers.

...And then a second round?  :thumb:


Oh no! I just missed it :( Any chance for round 2?  ;)

Offline MikeTheTiger

  • Posts: 520
  • Location: Louisiana
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #182 on: Sat, 26 March 2016, 23:36:01 »
Cutting it close but finally joined and paid  8)

Really wasn't sure if I was going to join or not but I love small keyboards too much to miss this! Thanks jd and can't wait to try these bad boys out :thumb:


So what is the status on this GB? it's already closed right?

Yes, the GB ordering phase is closed. I want to thank everyone for their orders and prompt payments!

Now the pre-orders are being sent to manufacture. Once they are complete, they will be shipped to me for distribution to all the buyers.

...And then a second round?  :thumb:


Oh no! I just missed it :( Any chance for round 2?  ;)
Me too...I forgot to place my order before it closed.

Offline trotXid

  • Posts: 17
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #183 on: Tue, 29 March 2016, 12:19:15 »
I don't do DSA.  :(

HEY !!

Right now , JD45 X DSA Profile keycap

Show Image
ZE9H0002 by bullock wu, 於 Flickr

Show Image
ZE9H0004 by bullock wu, 於 Flickr

Show Image
ZE9H0009 by bullock wu, 於 Flickr

Show Image
ZE9H0010 by bullock wu, 於 Flickr

Thanks JD !!

Thank you, Justin, for the awesome photos of the JD45 with Granite!!


And here is Green Tea:

Show Image


Hey JD, I am wondering if you have the dimensions of the case/keyboard?
I want to compare the size to my HHKB.
Also could I request some side on and front/back pictures of the different case styles especially the blocked corners case?
I'm still undecided, need a nudge.
Cheers

I am also looking for the dimensions of the fully assembled version.  dummytim is making me a case and I want to make sure it fits  ;D  Thanks!

Offline jdcarpe

  • * Curator
  • Thread Starter
  • Posts: 8856
  • Location: Odessa, TX
  • Live long, and prosper.
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #184 on: Tue, 29 March 2016, 19:18:45 »
I don't do DSA.  :(

HEY !!

Right now , JD45 X DSA Profile keycap

Show Image
ZE9H0002 by bullock wu, 於 Flickr

Show Image
ZE9H0004 by bullock wu, 於 Flickr

Show Image
ZE9H0009 by bullock wu, 於 Flickr

Show Image
ZE9H0010 by bullock wu, 於 Flickr

Thanks JD !!

Thank you, Justin, for the awesome photos of the JD45 with Granite!!


And here is Green Tea:

Show Image


Hey JD, I am wondering if you have the dimensions of the case/keyboard?
I want to compare the size to my HHKB.
Also could I request some side on and front/back pictures of the different case styles especially the blocked corners case?
I'm still undecided, need a nudge.
Cheers

I am also looking for the dimensions of the fully assembled version.  dummytim is making me a case and I want to make sure it fits  ;D  Thanks!

I just measured one of the production samples, and I got:

10.125" x 3.50" x 1.125"
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline iamtootallforthis

  • Something a lot Funnier
  • * Global Moderator
  • Posts: 4263
  • Location: West Palm Beach, FL
  • I like green stuffs.
    • WTB/WTTF Thread
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #185 on: Thu, 31 March 2016, 09:34:50 »
I don't do DSA.  :(

HEY !!

Right now , JD45 X DSA Profile keycap

Show Image
ZE9H0002 by bullock wu, 於 Flickr

Show Image
ZE9H0004 by bullock wu, 於 Flickr

Show Image
ZE9H0009 by bullock wu, 於 Flickr

Show Image
ZE9H0010 by bullock wu, 於 Flickr

Thanks JD !!

Thank you, Justin, for the awesome photos of the JD45 with Granite!!


And here is Green Tea:

Show Image


Hey JD, I am wondering if you have the dimensions of the case/keyboard?
I want to compare the size to my HHKB.
Also could I request some side on and front/back pictures of the different case styles especially the blocked corners case?
I'm still undecided, need a nudge.
Cheers

I am also looking for the dimensions of the fully assembled version.  dummytim is making me a case and I want to make sure it fits  ;D  Thanks!

I just measured one of the production samples, and I got:

10.125" x 3.50" x 1.125"

I am guessing this is without caps?

Offline jdcarpe

  • * Curator
  • Thread Starter
  • Posts: 8856
  • Location: Odessa, TX
  • Live long, and prosper.
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #186 on: Thu, 31 March 2016, 09:57:36 »
I don't do DSA.  :(

HEY !!

Right now , JD45 X DSA Profile keycap

Show Image
ZE9H0002 by bullock wu, 於 Flickr

Show Image
ZE9H0004 by bullock wu, 於 Flickr

Show Image
ZE9H0009 by bullock wu, 於 Flickr

Show Image
ZE9H0010 by bullock wu, 於 Flickr

Thanks JD !!

Thank you, Justin, for the awesome photos of the JD45 with Granite!!


And here is Green Tea:

Show Image


Hey JD, I am wondering if you have the dimensions of the case/keyboard?
I want to compare the size to my HHKB.
Also could I request some side on and front/back pictures of the different case styles especially the blocked corners case?
I'm still undecided, need a nudge.
Cheers

I am also looking for the dimensions of the fully assembled version.  dummytim is making me a case and I want to make sure it fits  ;D  Thanks!

I just measured one of the production samples, and I got:

10.125" x 3.50" x 1.125"

I am guessing this is without caps?
Actually, that is measured to the top of the stock keycaps. They are uniform bottom row OEM profile.
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline iamtootallforthis

  • Something a lot Funnier
  • * Global Moderator
  • Posts: 4263
  • Location: West Palm Beach, FL
  • I like green stuffs.
    • WTB/WTTF Thread
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #187 on: Thu, 31 March 2016, 11:45:04 »
More
I don't do DSA.  :(

HEY !!

Right now , JD45 X DSA Profile keycap

Show Image
ZE9H0002 by bullock wu, 於 Flickr

Show Image
ZE9H0004 by bullock wu, 於 Flickr

Show Image
ZE9H0009 by bullock wu, 於 Flickr

Show Image
ZE9H0010 by bullock wu, 於 Flickr

Thanks JD !!

Thank you, Justin, for the awesome photos of the JD45 with Granite!!


And here is Green Tea:

Show Image


Hey JD, I am wondering if you have the dimensions of the case/keyboard?
I want to compare the size to my HHKB.
Also could I request some side on and front/back pictures of the different case styles especially the blocked corners case?
I'm still undecided, need a nudge.
Cheers

I am also looking for the dimensions of the fully assembled version.  dummytim is making me a case and I want to make sure it fits  ;D  Thanks!

I just measured one of the production samples, and I got:

10.125" x 3.50" x 1.125"

I am guessing this is without caps?

Actually, that is measured to the top of the stock keycaps. They are uniform bottom row OEM profile.

Ok cool thanks!

Offline chuckdee

  • * Destiny Supporter
  • Posts: 1225
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #188 on: Fri, 01 April 2016, 19:38:13 »
Cutting it close but finally joined and paid  8)

Really wasn't sure if I was going to join or not but I love small keyboards too much to miss this! Thanks jd and can't wait to try these bad boys out :thumb:


So what is the status on this GB? it's already closed right?

Yes, the GB ordering phase is closed. I want to thank everyone for their orders and prompt payments!

Now the pre-orders are being sent to manufacture. Once they are complete, they will be shipped to me for distribution to all the buyers.

...And then a second round?  :thumb:


Oh no! I just missed it :( Any chance for round 2?  ;)
Me too...I forgot to place my order before it closed.

Me too.  Paying too much attention to the Planck and missed this one.  A bit more expensive, but I think I'll like the layout more.
Clueboard Gateron Browns| RS Ver.b Gateron Browns| Custom JD45 MX Browns
Currently Supporting:

Offline jdcarpe

  • * Curator
  • Thread Starter
  • Posts: 8856
  • Location: Odessa, TX
  • Live long, and prosper.
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #189 on: Sat, 02 April 2016, 18:04:23 »
UPDATE TIME


So, everything is going well. I got the funds transferred to TEX, so that production can begin. Now we just wait for the keyboards to be made, so that I can deliver them to you!



PLEASE, EVERYONE, IF YOU HAVE ANY QUESTIONS OR CONCERNS, CONTACT ME IMMEDIATELY. The worst thing you could do would be to file a dispute with PayPal, so please talk to me before doing anything like that. I am always available here via PM, or via email. If you need my email address, you can use the one from your PayPal invoice, from the order confirmation, or [my GH username] at gmail.

Thanks again for your continued support!
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline Tre3Cycl3S

  • Posts: 60
  • Location: Canada
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #190 on: Sat, 02 April 2016, 18:54:24 »
Excellent news jdcarpe! The update is much appreciated!
                                           
      QFR             HHKB Pro-2          JD45                 VE.A              XMIT 61-Key             JD40 Mk.II               V60 Mini       Realforce 87U          M65-A                 Custom
   MX Blue            45g Topre         MX Blue        R5 67g Zealios     50g Hall Effect     Modded Gateron Red     Matias Click        55g Topre       R5 78g Zealios      62g Ergo Grey

Offline chuckdee

  • * Destiny Supporter
  • Posts: 1225
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #191 on: Sat, 02 April 2016, 20:56:11 »
If at any time, anyone decides they need to bail, at jdcarpe's OK of course, PM me... I'd love to get in.
Clueboard Gateron Browns| RS Ver.b Gateron Browns| Custom JD45 MX Browns
Currently Supporting:

Offline WNovizar

  • Posts: 382
  • Location: Indonesia
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #192 on: Tue, 12 April 2016, 19:30:33 »
Hey JD, nice that this GB is going smooth  :cool:.

I have a question, I plan to put cherry-profile keyset to this JD45, however I am finding difficulties in completing the set because of unique size, particularly 1.75u enter key. AFAIK, no one made cherry-profile R2 1.75u enter key(not even blanks), correct?
I like mechanical keyboards

Offline jdcarpe

  • * Curator
  • Thread Starter
  • Posts: 8856
  • Location: Odessa, TX
  • Live long, and prosper.
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #193 on: Thu, 14 April 2016, 11:38:18 »
Hey JD, nice that this GB is going smooth  :cool:.

I have a question, I plan to put cherry-profile keyset to this JD45, however I am finding difficulties in completing the set because of unique size, particularly 1.75u enter key. AFAIK, no one made cherry-profile R2 1.75u enter key(not even blanks), correct?

You could always use a 1.75u center-stemmed Caps Lock key.
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline WNovizar

  • Posts: 382
  • Location: Indonesia
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #194 on: Thu, 14 April 2016, 11:39:36 »
Yeah I could do that. But what about 1.25u tab key. And what are the stabilizer spacing for 6u spacebar?

Sent from my E5563 using Tapatalk

I like mechanical keyboards

Offline justinyhuang

  • Posts: 30
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #195 on: Fri, 03 June 2016, 13:04:19 »
any news? i assume no news is good news?  :)
also it seems like GH is suffering from some financial issues, is there a backup communication channel for this GB, in case, i mean just in case, GH is gone?

Offline chuckdee

  • * Destiny Supporter
  • Posts: 1225
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #196 on: Fri, 03 June 2016, 13:42:31 »
any news? i assume no news is good news?  :)
also it seems like GH is suffering from some financial issues, is there a backup communication channel for this GB, in case, i mean just in case, GH is gone?

GH won't be gone from my interpretation.  It's just that few are footing the bill, and they want to spread that around, whether via advertising/affiliates and/or donations.
Clueboard Gateron Browns| RS Ver.b Gateron Browns| Custom JD45 MX Browns
Currently Supporting:

Offline mteinum

  • Posts: 94
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #197 on: Fri, 03 June 2016, 14:50:39 »
And here is Green Tea:

Show Image


I hope there will be another GB on this.  So sorry I missed the first one.

Offline fluxrez

  • Posts: 107
  • Location: Sacramento, CA
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #198 on: Sun, 12 June 2016, 13:08:58 »
Very sad I missed this one

Offline Gatix

  • #!/bin/sh
  • Posts: 81
  • Location: Manila
  • console.log
Re: [GB] JD45 KEYBOARD PRE-ORDERS
« Reply #199 on: Sun, 12 June 2016, 14:13:02 »
I missed this one. Will there be a round 2?