Author Topic: 3D printed dragon keycap  (Read 3163 times)

0 Members and 1 Guest are viewing this topic.

Offline callofcandy

  • Thread Starter
  • Posts: 4
  • Location: Germany
3D printed dragon keycap
« on: Wed, 16 March 2016, 19:07:07 »
Hi guys,

I got something from shapeways in the mail today :D
I's a dragon keycap I designed and I made some pictures I wanted to share with you.

I am very happy with the quality of the 'Frosted Detail Extreme' material.
Almost no detail from my sculpt is lost and the stem is a perfect fit.

The Strong&Flexible Plastic lacks the high detail of the Frosted Detail material, but I think it turned out good as well.
The stem is a bit tighter, but fits on my gateron blue switches just well with a little pressure.

Thanks for watching :)





More pictures here http://imgur.com/a/8Qtc9

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 21065
  • Location: melbourne.vic.au
  • Missed another sale.
Re: 3D printed dragon keycap
« Reply #1 on: Sat, 26 March 2016, 05:24:55 »
Not bad!

The scales came out well, it's hard to see them on the transparent ones though.

What is the fit like?  Tight, loose or just right?
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But thatís incorrect. Itís in HHKBís slogan, but when Americaís cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Offline callofcandy

  • Thread Starter
  • Posts: 4
  • Location: Germany
Re: 3D printed dragon keycap
« Reply #2 on: Wed, 06 April 2016, 19:35:20 »
Hey, thanks :)

Yea, unfortunately the translucent material is a bit harder to photograph but is actually really detailed.
I will try out a new material for my next designs (Black High Definition Acrylate).
It should provide high details and hopefully will be easier to photograph.

The fit with the Frosted Detail (translucent) material is great.
With the Strong and Flexible Plastic materials (colored) I sometimes had to press the keycap a little harder down.
But all of my ordered prints did fit just well so far.

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 21065
  • Location: melbourne.vic.au
  • Missed another sale.
Re: 3D printed dragon keycap
« Reply #3 on: Sun, 29 May 2016, 03:51:56 »
The best ones are usually the most difficult to photograph.
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But thatís incorrect. Itís in HHKBís slogan, but when Americaís cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ