« previous next »
Pages:  [1]     Go Down

Author Topic: Hello  (Read 2825 times)

0 Members and 1 Guest are viewing this topic.

Offline MRod

  • Thread Starter
  • Posts: 3
Hello
« on: Tue, 29 March 2016, 10:20:52 »
Hey all, I joined so I can keep an eye out for any forthcoming numpad GBs. I've been lurking r/mechanicalkeyboards for the past couple months and have noticed that a lot of stuff I'm interested in (mainly numpads) comes through GH.

I don't yet have a full mech (just a Maxkeyboard Falcon 8 with MX Browns), but I am eagerly awaiting the next ErgoDox Infinity drop on MD. I recognize that's pretty much like jumping into the deep end, but I'm set on an ergonomic form factor since I have been using an MS Natural keyboard in its various incarnations for years (also using a Sculpt). I'm confident I can handle the soldering for the dox.

Anyhow, I look forward to participating in the community here.
Logged

Offline Kompanion

  • Posts: 62
  • Location: NC, USA
Re: Hello
« Reply #1 on: Tue, 29 March 2016, 10:59:42 »
Welcome! I like your ambition!  :thumb:
Logged
     

________________________________________________

Offline mobbo

  • u fk
  • * Exquisite Elder
  • Posts: 1135
  • Location: Canada
Re: Hello
« Reply #2 on: Tue, 29 March 2016, 11:08:05 »
Welcome! If you're looking for numberpads, keep an eye out on KingRama's Macropad that's in the works (he has a thread in the Artisan subforum).

Logged
Quote from: Binge
crumping is like twerking but it's all about getting low with force.

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8946
  • Location: The Windy City
Re: Hello
« Reply #3 on: Tue, 29 March 2016, 11:11:01 »
Quote from: mobbo on Tue, 29 March 2016, 11:08:05
Welcome! If you're looking for numberpads, keep an eye out on KingRama's Macropad that's in the works (he has a thread in the Artisan subforum).

That's not going to be a very good number pad, though.
Logged

Offline jaejae

  • Posts: 6
  • Location: land of promises
Re: Hello
« Reply #4 on: Tue, 29 March 2016, 11:20:03 »
welcomeeeeeeee
Logged

Offline mobbo

  • u fk
  • * Exquisite Elder
  • Posts: 1135
  • Location: Canada
Re: Hello
« Reply #5 on: Tue, 29 March 2016, 12:09:19 »
Quote from: romevi on Tue, 29 March 2016, 11:11:01
Quote from: mobbo on Tue, 29 March 2016, 11:08:05
Welcome! If you're looking for numberpads, keep an eye out on KingRama's Macropad that's in the works (he has a thread in the Artisan subforum).

That's not going to be a very good number pad, though.

Ah yeah, you're right >.<

If you're looking for custom GBs keep an eye on this one too: https://geekhack.org/index.php?topic=79052.0

Not sure if there are any other ICs or GBs running atm for numberpads.
Logged
Quote from: Binge
crumping is like twerking but it's all about getting low with force.

Offline MRod

  • Thread Starter
  • Posts: 3
Re: Hello
« Reply #6 on: Tue, 29 March 2016, 12:26:30 »
Thanks for the responses!

Quote from: mobbo on Tue, 29 March 2016, 12:09:19
If you're looking for custom GBs keep an eye on this one too: https://geekhack.org/index.php?topic=79052.0

Not sure if there are any other ICs or GBs running atm for numberpads.

Awesome - the option with the full extra row on the top is the type of pad I'm looking for. I nearly pulled the trigger on the aluminum numpad that was on MD last week, but held off since I'd miss that full top (albeit extra) row.
Logged

Offline xtrafrood

  • formerly csmertx
  • * Elevated Elder
  • Posts: 2716
  • Location: Gainesville, FL
  • KA2 touchpad on top
    • csmertx.com
Re: Hello
« Reply #7 on: Tue, 29 March 2016, 20:33:46 »
Welcome  :D

Are you staying with the same switch type?
Logged
(sold) Chris Schammert (Christopher Schammert)

Offline MRod

  • Thread Starter
  • Posts: 3
Re: Hello
« Reply #8 on: Tue, 29 March 2016, 22:55:58 »
Quote from: csmertx on Tue, 29 March 2016, 20:33:46
Welcome  :D

Are you staying with the same switch type?

For the dox, I'm thinking of going with MX Browns. I'm considering something a bit heavier for the numpad, but I don't know. Thoughts?
Logged

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 21175
  • Location: melbourne.vic.au
  • Missed another sale.
Re: Hello
« Reply #9 on: Wed, 30 March 2016, 04:59:13 »
Welcome to Geekhack!

As far as numpads go, there is this on Massdrop: https://www.massdrop.com/buy/npkc-17-switch-tester?mode=guest_open

Apparently the PCB is not that good (see the comments), but you can do this to it: http://imgur.com/a/Q2pjK
Logged
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But that’s incorrect. It’s in HHKB’s slogan, but when America’s cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Offline xtrafrood

  • formerly csmertx
  • * Elevated Elder
  • Posts: 2716
  • Location: Gainesville, FL
  • KA2 touchpad on top
    • csmertx.com
Re: Hello
« Reply #10 on: Wed, 30 March 2016, 06:36:17 »
If you miss that NPKC drop and you're excited about that numeric keypad you can find that on Ebay as a switch sampler.

Oh if you want to switch to a heavier cherry mx maybe try some vintage mx black switches. Or, a lot of people seem to like those new Zealio switches. I know I'll probably try them at some point  :thumb: Even if the name is a bit--I can't think of the word atm

Logged
(sold) Chris Schammert (Christopher Schammert)
Pages:  [1]     Go Up
« previous next »