Author Topic: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)  (Read 24004 times)

0 Members and 1 Guest are viewing this topic.

Offline zennasyndroxx

  • Thread Starter
  • Posts: 646
  • It's good to be back!
[eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« on: Thu, 14 April 2016, 10:39:16 »
I've recently have someone to mill this plate for my Duck Mini build. Some pictures of the plate below:




And this is what it looks like after it's assembled:




Currently my PC supplier has only clear ones, will ask if there's any other color.

Typing test here:


Note that the typing test is done on a Duck Mini V1 case, 55g gateron blacks. The end result with your setup might be different.

That was honey lemon btw. it's nice

Specifications (??) of this plate?

  • 5mm in thickness
  • Will have universal screw holes to fit your other cases and not only Korean customs!
  • Fully CNC Milled plate
« Last Edit: Thu, 14 April 2016, 16:10:27 by zennasyndroxx »

Offline billnye

  • ability man
  • Posts: 2124
  • Location: Mississippi
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates
« Reply #1 on: Thu, 14 April 2016, 10:42:51 »
I would buy one.

Do you think you could post a typing video of the board?

Also interested in split backspace.
« Last Edit: Thu, 14 April 2016, 10:48:37 by billnye »

Offline Dernubenfrieken

  • Posts: 471
  • Location: NJ/NY
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #2 on: Thu, 14 April 2016, 10:45:28 »
I'd buy it just like that. Or with a split backspace.
    

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8898
  • Location: The Windy City
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #3 on: Thu, 14 April 2016, 10:48:31 »
Hecky yes.

Offline lolpes

  • Posts: 377
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #4 on: Thu, 14 April 2016, 10:59:49 »
I would buy one with ISO support, or with 1.25u left shift :3

Offline zennasyndroxx

  • Thread Starter
  • Posts: 646
  • It's good to be back!
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #5 on: Thu, 14 April 2016, 11:00:12 »
uploaded typing test. :D


Offline redskull

  • Posts: 381
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #6 on: Thu, 14 April 2016, 11:05:34 »
will this fit the HHKB?  :llama:

Offline zennasyndroxx

  • Thread Starter
  • Posts: 646
  • It's good to be back!
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #7 on: Thu, 14 April 2016, 11:07:21 »
will this fit the HHKB?  :llama:

oh you

if you have a viper then i can make one for you

Offline CommonCurt

  • One of the cool kids
  • * Esteemed Elder
  • Posts: 4612
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #8 on: Thu, 14 April 2016, 11:11:00 »
I'd probably get one with the same layout you have (Except with a 2.75 right shift).

Would love to see a more frosted clear option.
Some of my Keyboards -->
More
OTD Koala:  lubed 62g Old MX-Blacks   |   LZ-GH V2   |   KMAC2:  lubed 62g Tactile MX-Greys   |   LZ CLS s   |   X60:  lubed 62g Vintage MX-Blacks   |   GON NerD 60:  lubed 62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  lubed 62g MX-Clears  &  lubed  62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS/WTT ---->
More

Offline redskull

  • Posts: 381
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #9 on: Thu, 14 April 2016, 11:12:19 »
will this fit the HHKB?  :llama:

oh you

if you have a viper then i can make one for you



Offline zennasyndroxx

  • Thread Starter
  • Posts: 646
  • It's good to be back!
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #10 on: Thu, 14 April 2016, 11:12:25 »
I'd probably get one with the same layout you have (Except with a 2.75 right shift).

Would love to see a more frosted clear option.

I've actually got this plate in clear. I've decided to sand them for a bit for a slightly frosted look.

will consider sandblasting the plates for a more frosted look

Offline xondat

  • i'm not a star
  • * Maker
  • Posts: 5225
  • Location: United Kingdom
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #11 on: Thu, 14 April 2016, 11:13:15 »
That plate looks amazing, the right level of frost for me. What's the thickness?

Offline zennasyndroxx

  • Thread Starter
  • Posts: 646
  • It's good to be back!
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #12 on: Thu, 14 April 2016, 11:15:36 »
will this fit the HHKB?  :llama:

oh you

if you have a viper then i can make one for you

Show Image


what about eagle with this plate? eagle is fine i guess heh

That plate looks amazing, the right level of frost for me. What's the thickness?

thank you :) it's 5mm thick btw. just to clarify that this plate won't completely touch the PCB. there's like a hairline thick gap between the pcb and the plate.

Offline nickheller

  • Cherry ML life
  • * Destiny Supporter
  • Posts: 1594
  • Location: Earth
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #13 on: Thu, 14 April 2016, 11:16:42 »
Interested
Gotcha. Those sacks look mouth watering.

Offline CommonCurt

  • One of the cool kids
  • * Esteemed Elder
  • Posts: 4612
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #14 on: Thu, 14 April 2016, 11:16:43 »
I'd probably get one with the same layout you have (Except with a 2.75 right shift).

Would love to see a more frosted clear option.

I've actually got this plate in clear. I've decided to sand them for a bit for a slightly frosted look.

will consider sandblasting the plates for a more frosted look

It looks good they way you have it now, but if there was a more frosted option that would be great  :)
Some of my Keyboards -->
More
OTD Koala:  lubed 62g Old MX-Blacks   |   LZ-GH V2   |   KMAC2:  lubed 62g Tactile MX-Greys   |   LZ CLS s   |   X60:  lubed 62g Vintage MX-Blacks   |   GON NerD 60:  lubed 62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  lubed 62g MX-Clears  &  lubed  62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS/WTT ---->
More

Offline redskull

  • Posts: 381
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #15 on: Thu, 14 April 2016, 11:21:41 »
I'd probably get one with the same layout you have (Except with a 2.75 right shift).

Would love to see a more frosted clear option.

I've actually got this plate in clear. I've decided to sand them for a bit for a slightly frosted look.

will consider sandblasting the plates for a more frosted look

It looks good they way you have it now, but if there was a more frosted option that would be great  :)

zenna can do some sanding himself to get the frosted look

Offline HPE1000

  • Keycap Paparazzo
  • Posts: 2922
  • Location: Carolina Beach, NC
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #16 on: Thu, 14 April 2016, 11:28:47 »
im in  ;)

Offline soilheart

  • Posts: 186
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #17 on: Thu, 14 April 2016, 12:00:25 »
I could be interested if an ISO plate would be made (same layout but ISO enter and short left shift).
(K70 -  Brown) --- Pok3r - Clear --- Ducky Shine4 - Clear --- WKL B.face X2 - 67g Zealios --- CP-SQ - 78g Zealios --- RS68 - 62g Zealios
(Sold/retired - To be built)

Offline mrbishop

  • * Maker
  • Posts: 799
  • Location: South Carolina USA
  • Evil Genius
    • Bishop Computer Design web
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #18 on: Thu, 14 April 2016, 12:01:02 »
Very nice. what endmill are you using?
Projects
Build to give back, 40% | Alps/Matias Removal ToolUltraHack 67% Hackdura  | ErgoDox case
                             
    

Offline zennasyndroxx

  • Thread Starter
  • Posts: 646
  • It's good to be back!
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #19 on: Thu, 14 April 2016, 12:18:17 »
I could be interested if an ISO plate would be made (same layout but ISO enter and short left shift).

there will be either universal or multiple layouts for this plate during the GB. maybe i'll stick to universal.

Very nice. what endmill are you using?

good question. I'll need to get back to you once I've contacted the factory that does this

Offline mrbishop

  • * Maker
  • Posts: 799
  • Location: South Carolina USA
  • Evil Genius
    • Bishop Computer Design web
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #20 on: Thu, 14 April 2016, 12:20:01 »
I could be interested if an ISO plate would be made (same layout but ISO enter and short left shift).

there will be either universal or multiple layouts for this plate during the GB. maybe i'll stick to universal.

Very nice. what endmill are you using?

good question. I'll need to get back to you once I've contacted the factory that does this

oh no worries. i was just curious :)
Projects
Build to give back, 40% | Alps/Matias Removal ToolUltraHack 67% Hackdura  | ErgoDox case
                             
    

Offline soilheart

  • Posts: 186
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #21 on: Thu, 14 April 2016, 12:31:52 »
I could be interested if an ISO plate would be made (same layout but ISO enter and short left shift).

there will be either universal or multiple layouts for this plate during the GB. maybe i'll stick to universal.

Universal would be a no-go for me, I really dislike the large cutouts in an universal plate. (People have implied that I'm overly sensitive about universal cutouts though, so I wouldn't say this is the general opinion in any way =P).
(K70 -  Brown) --- Pok3r - Clear --- Ducky Shine4 - Clear --- WKL B.face X2 - 67g Zealios --- CP-SQ - 78g Zealios --- RS68 - 62g Zealios
(Sold/retired - To be built)

Offline mrbishop

  • * Maker
  • Posts: 799
  • Location: South Carolina USA
  • Evil Genius
    • Bishop Computer Design web
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #22 on: Thu, 14 April 2016, 12:57:23 »
I could be interested if an ISO plate would be made (same layout but ISO enter and short left shift).

there will be either universal or multiple layouts for this plate during the GB. maybe i'll stick to universal.

Universal would be a no-go for me, I really dislike the large cutouts in an universal plate. (People have implied that I'm overly sensitive about universal cutouts though, so I wouldn't say this is the general opinion in any way =P).

for mass marketing i see where universal plates are useful but i'm on your side

I have my own CNC and am about to cut out acrylic plates for my ergodox build (3piece case)

oh nice 400th post! #milestone
Projects
Build to give back, 40% | Alps/Matias Removal ToolUltraHack 67% Hackdura  | ErgoDox case
                             
    

Offline Dernubenfrieken

  • Posts: 471
  • Location: NJ/NY
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #23 on: Thu, 14 April 2016, 13:00:57 »
I could be interested if an ISO plate would be made (same layout but ISO enter and short left shift).

there will be either universal or multiple layouts for this plate during the GB. maybe i'll stick to universal.

Universal would be a no-go for me, I really dislike the large cutouts in an universal plate. (People have implied that I'm overly sensitive about universal cutouts though, so I wouldn't say this is the general opinion in any way =P).

Agreed, although I'm an ansi boy so I'd be on the opposing side if only one layout is chosen. But especially with a pretty clear backplate like this, I feel cutouts would look bad.
    

Offline kiwi99

  • that's a gnarly dookie
  • Posts: 743
  • Location: Penticton, BC
  • authentic church of halverson member
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #24 on: Thu, 14 April 2016, 13:04:02 »
Any idea on pricing? I remember having a thick acrylic plate sorta like this it was amazing and would love to have another.

Offline zennasyndroxx

  • Thread Starter
  • Posts: 646
  • It's good to be back!
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #25 on: Thu, 14 April 2016, 13:06:59 »
Any idea on pricing? I remember having a thick acrylic plate sorta like this it was amazing and would love to have another.

maybe around 60 to 65 shipped (tracking included) with packaging to prevent damage during shipping

is the price fair enough?

Offline lootbag

  • Posts: 289
  • Location: HK
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #26 on: Thu, 14 April 2016, 13:28:11 »
zennasyndroxx, any chance you are willing to share the CAD file for the Duck Viper plate?
I have lots of acrylic and full time access to a laser cutter.
Would like to make my own plates and would be very much appreciated!

EDIT: I did CAD my own MX Duck Viper plate based on Duck's ALPS plate DXF but would be nice to have something to compare it to.
« Last Edit: Thu, 14 April 2016, 13:37:56 by lootbag »

Offline HPE1000

  • Keycap Paparazzo
  • Posts: 2922
  • Location: Carolina Beach, NC
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #27 on: Thu, 14 April 2016, 13:42:36 »
yea tbh i wont be interested with universal cutouts as I really dislike the look of them  :(

Offline kiwi99

  • that's a gnarly dookie
  • Posts: 743
  • Location: Penticton, BC
  • authentic church of halverson member
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #28 on: Thu, 14 April 2016, 15:51:33 »
Any idea on pricing? I remember having a thick acrylic plate sorta like this it was amazing and would love to have another.

maybe around 60 to 65 shipped (tracking included) with packaging to prevent damage during shipping

is the price fair enough?

that sounds fairly reasonable, how thick would they be?

Offline trenzafeeds

  • * Exquisite Elder
  • Posts: 1337
  • Location: vt
  • **** off
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #29 on: Thu, 14 April 2016, 15:52:41 »
These look really awesome, I would totally be down for one.
demik will never leave.

Unless he gets banned.

Offline FoC_Tow

  • * Destiny Supporter
  • Posts: 1121
  • Location: Germany
  • Brokehlicious
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #30 on: Thu, 14 April 2016, 15:59:56 »
Lookin awesome!
Would prefer splitting layouts on at least 2 plates. Prefer simple cuts to an overly universal plate...

Hhkb layout would be sweet as well.
Color me interested! :D

Offline zennasyndroxx

  • Thread Starter
  • Posts: 646
  • It's good to be back!
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #31 on: Thu, 14 April 2016, 16:06:46 »
zennasyndroxx, any chance you are willing to share the CAD file for the Duck Viper plate?
I have lots of acrylic and full time access to a laser cutter.
Would like to make my own plates and would be very much appreciated!

EDIT: I did CAD my own MX Duck Viper plate based on Duck's ALPS plate DXF but would be nice to have something to compare it to.

I don't have one currently :( sorry man

Any idea on pricing? I remember having a thick acrylic plate sorta like this it was amazing and would love to have another.

maybe around 60 to 65 shipped (tracking included) with packaging to prevent damage during shipping

is the price fair enough?

that sounds fairly reasonable, how thick would they be?

It's 5mm thick :)

These look really awesome, I would totally be down for one.
Lookin awesome!
Would prefer splitting layouts on at least 2 plates. Prefer simple cuts to an overly universal plate...

Hhkb layout would be sweet as well.
Color me interested! :D

Thanks!

so, winkeyless with split shift, standard ansi, hhkb with split backspace? hmm.


Offline soilheart

  • Posts: 186
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #32 on: Thu, 14 April 2016, 16:11:22 »

Lookin awesome!
Would prefer splitting layouts on at least 2 plates. Prefer simple cuts to an overly universal plate...

Hhkb layout would be sweet as well.
Color me interested! :D

Thanks!

so, winkeyless with split shift, standard ansi, hhkb with split backspace? hmm.

Ey, don't forget about ISO, please =(

I don't care about the rest of the layout (even though I do prefer split right shift and 1.25 modifiers, I can live with full right shift and WKL bottom row if need be).
(K70 -  Brown) --- Pok3r - Clear --- Ducky Shine4 - Clear --- WKL B.face X2 - 67g Zealios --- CP-SQ - 78g Zealios --- RS68 - 62g Zealios
(Sold/retired - To be built)

Offline eyesmiles

  • Posts: 301
  • Location: San Francisco Bay Area
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #33 on: Thu, 14 April 2016, 16:53:19 »
Definitely interested in 2 plates, specifically a clear/frosted one and if available, white. The tolerances of the milling looks similar to GON's universal 60% aluminum plate which is exciting to see.

Offline switchnollie

  • sleever supreme
  • * Exquisite Elder
  • Posts: 1415
  • Location: 白い帽子
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #34 on: Fri, 15 April 2016, 01:05:07 »
Ooh that's nice :)
Much preferred over metal for me.

Would also like ISO support :rolleyes:

Offline effectiveduck

  • Posts: 394
  • Location: Australia
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #35 on: Fri, 15 April 2016, 05:50:11 »
I really dig the cloudy look with the black pcb, definitely interested. But like a few others have mentioned, I would highly prefer a non-universal layout.

Offline phosphoric

  • Posts: 228
  • switch vagrant
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #36 on: Tue, 19 April 2016, 14:00:56 »
i never thought parts for my endgame build would start so early... wkl layout with a split shift (plate as it is in op) WITHOUT a universal layout (as mentioned throughout the thread) would be perfect.

in the interest of full disclosure, i would prefer a standard bottom row, but realize that this would create far too many complicated options. so yeah, a non-universal wkl layout is fine
Let's get this straight. There is nothing cool about keyboards we're all lame as fk.

speak for yourself

Offline Jumie

  • Posts: 298
  • Location: Dangerously Beautiful
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #37 on: Mon, 25 April 2016, 03:30:34 »
In as per OP's pic

Offline alienman82

  • * Elevated Elder
  • Posts: 4050
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #38 on: Mon, 25 April 2016, 15:47:41 »
removed.
« Last Edit: Thu, 01 March 2018, 15:25:51 by alienman82 »

Offline Damonskv

  • Posts: 263
  • Location: Moscow, Russia
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #39 on: Tue, 24 May 2016, 15:28:36 »
zennasyndroxx, any chance you are willing to share the CAD file for the Duck Viper plate?
I have lots of acrylic and full time access to a laser cutter.
Would like to make my own plates and would be very much appreciated!

EDIT: I did CAD my own MX Duck Viper plate based on Duck's ALPS plate DXF but would be nice to have something to compare it to.

I don't have one currently :( sorry man

Any idea on pricing? I remember having a thick acrylic plate sorta like this it was amazing and would love to have another.

maybe around 60 to 65 shipped (tracking included) with packaging to prevent damage during shipping

is the price fair enough?

that sounds fairly reasonable, how thick would they be?

It's 5mm thick :)

These look really awesome, I would totally be down for one.
Lookin awesome!
Would prefer splitting layouts on at least 2 plates. Prefer simple cuts to an overly universal plate...

Hhkb layout would be sweet as well.
Color me interested! :D

Thanks!

so, winkeyless with split shift, standard ansi, hhkb with split backspace? hmm.

Hi, sir. How about your plans about GB? I've participated in currently running 60% Feetless acrylic case. It would perfectly match with your plate, imho.
« Last Edit: Wed, 25 May 2016, 02:09:12 by Damonskv »

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8898
  • Location: The Windy City
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #40 on: Tue, 24 May 2016, 15:44:32 »
Totally forgot about this. Would definitely like to get one.

Offline Geekmie

  • Posts: 147
  • Location: New England, USA
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #41 on: Tue, 24 May 2016, 15:50:40 »
Agree. It will play nicely with Lustro GB as well. Will be in once available.

Offline axtran

  • Posts: 456
  • Location: Washington, DC, USA
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #42 on: Tue, 24 May 2016, 17:23:10 »
I am so excited. I love this plate!
MX Silent > MX Vintage Black > Everything Else

Offline fuzzycuffs

  • Posts: 13
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #43 on: Tue, 24 May 2016, 19:21:08 »
Very interesting.  Cut only for Cherry or also Alps compatible?

Offline alienman82

  • * Elevated Elder
  • Posts: 4050
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #44 on: Tue, 24 May 2016, 19:46:44 »
removed.
« Last Edit: Thu, 01 March 2018, 15:08:51 by alienman82 »

Offline FoC_Tow

  • * Destiny Supporter
  • Posts: 1121
  • Location: Germany
  • Brokehlicious
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #45 on: Wed, 25 May 2016, 03:58:35 »
Any updates?

Could really use a couple of these in my life...  ;)

Offline CommonCurt

  • One of the cool kids
  • * Esteemed Elder
  • Posts: 4612
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #46 on: Wed, 25 May 2016, 05:11:53 »
Any updates?

Could really use a couple of these in my life...  ;)

+1 same here.
Some of my Keyboards -->
More
OTD Koala:  lubed 62g Old MX-Blacks   |   LZ-GH V2   |   KMAC2:  lubed 62g Tactile MX-Greys   |   LZ CLS s   |   X60:  lubed 62g Vintage MX-Blacks   |   GON NerD 60:  lubed 62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  lubed 62g MX-Clears  &  lubed  62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS/WTT ---->
More

Offline zennasyndroxx

  • Thread Starter
  • Posts: 646
  • It's good to be back!
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #47 on: Wed, 25 May 2016, 12:57:02 »
Any updates?

Could really use a couple of these in my life...  ;)

Any updates?

Could really use a couple of these in my life...  ;)

+1 same here.

Very soon guys. Very soon.

Online joey

  • Posts: 2295
  • Location: UK
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #48 on: Wed, 25 May 2016, 13:02:40 »
I'm probably down for one :thumb:

Once I figure out my fave switches, this would probably be the best plate for it!

Offline cmb5286

  • Posts: 15
  • Location: St. Louis
Re: [eye see] CNC Milled 5mm Thick Polycarbonate Plates (for 60%)
« Reply #49 on: Sat, 28 May 2016, 12:36:53 »
Yeah I'm definitely interested in one of these!