Author Topic: [GB] Weight Insert for Octagon V2 - All Orders Shipped (Read 75324 times)

merlin64 · « **Reply #150 on:** Thu, 08 September 2016, 09:18:00 »

UPDATE

SS plates were actually finished last week but I somehow skimmed through email too fast and missed them. From the pictures they look much better than the brass ones!

We are currently sorting out logistics as to when I'm going to go pick them up or if they should just ship it out to me. I still have the brass plates that need to be sent for re-finishing so hopefully that can be sorted out soon.

Meanwhile, did someone say pictures?

omgar · « **Reply #151 on:** Thu, 08 September 2016, 09:55:56 »

Quote from: merlin64 on Thu, 08 September 2016, 09:18:00

UPDATE

SS plates were actually finished last week but I somehow skimmed through email too fast and missed them. From the pictures they look much better than the brass ones!

We are currently sorting out logistics as to when I'm going to go pick them up or if they should just ship it out to me. I still have the brass plates that need to be sent for re-finishing so hopefully that can be sorted out soon.

Meanwhile, did someone say pictures?

Oooo. That's nice.

-musubi · « **Reply #152 on:** Thu, 08 September 2016, 10:36:00 »

Dang that mirror finish, looks great!! When can we pick up?

merlin64 · « **Reply #153 on:** Thu, 08 September 2016, 13:20:51 »

Quote from: -musubi on Thu, 08 September 2016, 10:36:00

Dang that mirror finish, looks great!! When can we pick up?

I'll keep you posted when I find out.

gaiden · « **Reply #154 on:** Thu, 08 September 2016, 14:28:37 »

Wow excited for my engraved SS plate!

Sent from my SM-G900T using Tapatalk

merlin64 · « **Reply #155 on:** Fri, 09 September 2016, 09:26:36 »

How many of you guys actually care if your brass plate has scratches. I know at least one of you doesn't. I'm thinking for those who don't care I can start shipping along with the Stainless steels hopefully by next weekend.

Any thoughts?

roostrc0gburn · « **Reply #156 on:** Fri, 09 September 2016, 10:52:54 »

Quote from: merlin64 on Fri, 09 September 2016, 09:26:36

How many of you guys actually care if your brass plate has scratches. I know at least one of you doesn't. I'm thinking for those who don't care I can start shipping along with the Stainless steels hopefully by next weekend.

Any thoughts?

lets see some pics. for as long as this has taken, i would like a mirror finish

aaron6301 · « **Reply #157 on:** Fri, 09 September 2016, 11:34:07 »

^Agreed. Is it possible to see what is actually going to be shipped to us prior to shipping, the actual weight assigned to buyer X?

Also, what is the expected completion date of the re-polished brass?

breitling · « **Reply #158 on:** Fri, 09 September 2016, 13:23:15 »

I guess I kind of care.. depends on how bad the scratching is for me.

ctrlX · « **Reply #159 on:** Fri, 09 September 2016, 15:00:47 »

I'd rather have mine polished.

mrkevint · « **Reply #160 on:** Fri, 09 September 2016, 16:05:04 »

I do not mind waiting longer to have my brass plate refinished. Thanks for keeping us up to date!

qqeyes · « **Reply #161 on:** Mon, 12 September 2016, 12:24:02 »

After seeing how beautiful the SS plates look in fine with waiting!

merlin64 · « **Reply #162 on:** Mon, 12 September 2016, 18:27:16 »

UPDATE

Picked up the SS plates and boy do they look many times better than the brass!! Here are some pictures! I've left some with the plastic still on so that you guys can peel it back. Here's a small sample

Those plastic pieces are super sticky. I had to rub it really hard to get it off. If you look at the blank plate you'll see that I still have some on the edges.

The brass plates have been sent over as well to be reworked, no ETA on when those will finish. However in the meantime I will start shipping out the SS plates to those who only ordered SS plates. Expect an invoice from me sometime soon regarding shipping. If you've previously spoken to me about combining shipping, I will hold off on those still.

Once again I apologize at how long this GB has taken. It was a big learning lesson for me but I am very glad that we are seeing light at the end of the tunnel!

tuco · « **Reply #163 on:** Mon, 12 September 2016, 18:50:44 »

Looks awesome!

gaiden · « **Reply #164 on:** Mon, 12 September 2016, 18:53:11 »

Wow yes! They look sexy as hell

Sent from my SM-G900T using Tapatalk

E3E · « **Reply #165 on:** Mon, 12 September 2016, 19:36:29 »

Very nice work from the shop, man. Those look so nice. The finish is amazing.

Butter · « **Reply #166 on:** Mon, 12 September 2016, 20:23:02 »

Oh boy oh boy . They look great! Can't wait for that invoice.

Sent from my SAMSUNG-SM-N930A using Tapatalk

yookwh · « **Reply #167 on:** Mon, 12 September 2016, 20:32:20 »

Hey there, do you by any chance have any extra SS plates? Thanks

ctrlX · « **Reply #168 on:** Tue, 13 September 2016, 02:30:28 »

Wow! If the brass plates turn out that shiny, I'd be more than happy! Cheers for doing this and no stress. GBs is nothing for the impatient one

merlin64 · « **Reply #169 on:** Tue, 13 September 2016, 11:33:41 »

Quote from: yookwh on Mon, 12 September 2016, 20:32:20

Hey there, do you by any chance have any extra SS plates? Thanks

Unfortunately I've only sold as many as were ordered. Your best bet is the secondary market.

roostrc0gburn · « **Reply #170 on:** Tue, 13 September 2016, 13:04:47 »

have you talked to your shop to get an ETA on the brass plates yet?

merlin64 · « **Reply #171 on:** Tue, 13 September 2016, 17:03:52 »

As of our conversation last night, ETA is still to be determined.

boo · « **Reply #172 on:** Tue, 13 September 2016, 22:10:08 »

paid shipping invoice for SS. HYPE

merlin64 · « **Reply #173 on:** Tue, 13 September 2016, 22:11:10 »

UPDATE

Just sent out the first wave of Shipping Invoices. Kudos to Butter for being super fast on payment. Once again you can check your orders on

http://tinyurl.com/jbj9c8l

These have been sent out to ONLY the people who ordered stainless, and ONLY if they live in the US.

gaiden · « **Reply #174 on:** Tue, 13 September 2016, 22:12:24 »

Quote from: merlin64 on Tue, 13 September 2016, 22:11:10

UPDATE

Just sent out the first wave of Shipping Invoices. Kudos to Butter for being super fast on payment. Once again you can check your orders on

http://tinyurl.com/jbj9c8l

These have been sent out to ONLY the people who ordered stainless, and ONLY if they live in the US.

SS shipping invoice paid! Woot!

Sent from my SM-G900T using Tapatalk

Butter · « **Reply #175 on:** Wed, 14 September 2016, 12:04:46 »

Got my tracking. Thank you

Butter · « **Reply #176 on:** Fri, 16 September 2016, 12:42:46 »

Just got my today. super fast shipping. Thank you for doing t his GB

Any plan for blackbird?

Butter · « **Reply #177 on:** Fri, 16 September 2016, 12:43:50 »

Quote from: Butter on Fri, 16 September 2016, 12:42:46

Just got my today. super fast shipping. Thank you for doing this GB

Any plan for blackbird?

Show Image

merlin64 · « **Reply #178 on:** Fri, 16 September 2016, 13:31:32 »

The Orion would be the next thing unless I get my hands on the blackbird design files

gaiden · « **Reply #179 on:** Fri, 16 September 2016, 13:45:10 »

Quote from: merlin64 on Fri, 16 September 2016, 13:31:32

The Orion would be the next thing unless I get my hands on the blackbird design files

I think what really matters would be how many people would commit.

Sent from my SM-G900T using Tapatalk

merlin64 · « **Reply #180 on:** Fri, 16 September 2016, 14:12:26 »

Prior to launching this GB I had people inquiring about the Orion. However there was more interest for the Octagon (plus I had one on order myself so I could actually test fit). A few people who are in this GB also expressed interest in an Orion weight.

I have design files and already have one GH member willing to test fit for the Orion, but I'd like to progress further with this GB before I start another one.

chili14 · « **Reply #181 on:** Fri, 16 September 2016, 14:50:28 »

Hey Merlin

I just wanted to check in again and see if there are still plans to run the switch top plate after this? I've been holding out on assembling mine in hopes the GB gets run.

And thanks again for running this GB, the plates look awesome.

merlin64 · « **Reply #182 on:** Fri, 16 September 2016, 14:58:55 »

I'm in the same boat as you man. I've purposely withheld on buying switches so I don't just spontaneously build it.

After completion of the GB, my guy was going to make the prototype (he has the design files already). But the bad polish job derailed stuff. In addition he also injured his hand so he couldn't do much with just one. I'm not his only customer and I'm probably one of his smaller ones too so I'm not expecting him to make a prototype until after the brass weights get picked up.

With that knowledge though I've been scouting around the Seattle area for any other people who could do it. Coincidentally there is one CNC miller 1.5 blocks away from my house, but for some reason they stopped responding. Maybe my potential order is too small and too cheap.

E3E · « **Reply #183 on:** Fri, 16 September 2016, 22:17:01 »

Quote from: merlin64 on Fri, 16 September 2016, 14:12:26

Prior to launching this GB I had people inquiring about the Orion. However there was more interest for the Octagon (plus I had one on order myself so I could actually test fit). A few people who are in this GB also expressed interest in an Orion weight.

I have design files and already have one GH member willing to test fit for the Orion, but I'd like to progress further with this GB before I start another one.

Sounds good to me!

I'm also down to participating in the GB and buying a plate if it happens.

airs · « **Reply #184 on:** Fri, 16 September 2016, 23:54:54 »

Thanks for meeting up today Merlin. Loving the extra weight!

boo · « **Reply #185 on:** Sat, 17 September 2016, 15:26:22 »

woohoo received mine just now.

So anyone have any idea how to get some of the glue off? I am using alcohol but seems like it spreads the glue rather than getting them off

airs · « **Reply #186 on:** Sat, 17 September 2016, 15:28:39 »

Quote from: boo on Sat, 17 September 2016, 15:26:22

woohoo received mine just now.

So anyone have any idea how to get some of the glue off? I am using alcohol but seems like it spreads the glue rather than getting them off

I use citrus air freshener to remove most stickers - works like magic: https://www.amazon.com/American-NA222-6-Citrus-Orange-Freshener/dp/B00173U7D4

They also have it at Home Depot and Walmart I think.

boo · « **Reply #187 on:** Sat, 17 September 2016, 18:36:58 »

Thanks air!

Sent from my iPhone using Tapatalk

gaiden · « **Reply #188 on:** Sat, 17 September 2016, 18:42:18 »

Quote from: airs on Sat, 17 September 2016, 15:28:39

Quote from: boo on Sat, 17 September 2016, 15:26:22
woohoo received mine just now.

So anyone have any idea how to get some of the glue off? I am using alcohol but seems like it spreads the glue rather than getting them off

I use citrus air freshener to remove most stickers - works like magic: https://www.amazon.com/American-NA222-6-Citrus-Orange-Freshener/dp/B00173U7D4

They also have it at Home Depot and Walmart I think.

Let's do a sticky plastic removal group buy! XD

Sent from my SM-G900T using Tapatalk

Asbrodeus · « **Reply #189 on:** Mon, 19 September 2016, 07:50:15 »

I know you didnt make any extras but is there a chance to get one made even at a higher one off price? didn't manage to snag an octagon until very recently

. I'm already charging up my mechmarket search skills.

merlin64 · « **Reply #190 on:** Mon, 19 September 2016, 08:50:51 »

There's always a chance but it probably won't happen until this first round is done.

-musubi · « **Reply #191 on:** Tue, 20 September 2016, 02:00:08 »

Met up today in person with Merlin and picked up my weight. He's an awesome and stand up guy! Definitely sit tight and be patient guys, he's working his butt off for the GB

I will post pics of the weight and installation later when I have time to unscrew my octagon

merlin64 · « **Reply #192 on:** Tue, 20 September 2016, 09:41:34 »

Thanks for the vote of confidence!

Anyway here's an UPDATE

All local (United States) orders of Stainless Steel only units, have been shipped (except for 1 waiting on shipping payments). This week I'll be sending out invoices to Stainless Steel only international orders.

Brass is easier to work with than stainless steel, my manufacturer won't need to re-order pre-polished material. He's working on it this week. Unfortunately by the time he is done, I'm going to be off on vacation so I really won't be getting any logistics done until I get back.

Once again, feel free to check your order on http://tinyurl.com/jbj9c8l (also available on the original post) and contact me if you have any concerns or questions.

megaforce · « **Reply #193 on:** Thu, 22 September 2016, 13:03:21 »

Received mine last week; thanks for a smooth GB!

merlin64 · « **Reply #194 on:** Thu, 22 September 2016, 15:49:53 »

Thanks for your kind words! That looks sick!

-musubi · « **Reply #195 on:** Mon, 03 October 2016, 03:24:41 »

Finally got to installing mine the other day, looked beautiful! It's a shame I didn't have enough spare stainless steel hex screws that came with the octagon but found some other ones that fit fine.

Dreamre · « **Reply #196 on:** Mon, 03 October 2016, 16:39:44 »

Hi Merlin,

Have invoices been sent out for the SS weight for Canadians yet?

Thanks!

E3E · « **Reply #197 on:** Mon, 03 October 2016, 18:27:59 »

Quote from: megaforce93 on Thu, 22 September 2016, 13:03:21

Received mine last week; thanks for a smooth GB!

Show Image

Show Image

You know, I just weighed my Octagon v1, and it's not too far off from the 5.5lb weight. It's 5.2 lbs. If you have an aluminum plate though, that would explain it, otherwise I'd guess it's probably the integrated diffuser cut outs that take away weight.

merlin64 · « **Reply #198 on:** Wed, 05 October 2016, 09:41:54 »

UPDATE

I made it back from my trip! =)

I've shipped out all the US Stainless Steel orders. Hurray.

The brass plates are just about done, just need to find time to go and pick it up.

I'm at the point where it might be faster just to have him mail it over. We are in talks.

aaron6301 · « **Reply #199 on:** Wed, 05 October 2016, 10:15:28 »

Quote from: merlin64 on Wed, 05 October 2016, 09:41:54

UPDATE

I made it back from my trip! =)

I've shipped out all the US Stainless Steel orders. Hurray.

The brass plates are just about done, just need to find time to go and pick it up.

I'm at the point where it might be faster just to have him mail it over. We are in talks.

Thanks for the update, Merlin.

Sent you a PM a couple days about my order

News:

Author Topic: [GB] Weight Insert for Octagon V2 - All Orders Shipped (Read 75324 times)