Author Topic: [GB] Noxary X60 V1  (Read 290035 times)

0 Members and 1 Guest are viewing this topic.

Offline catweewee

  • SINGA | singakbd.com
  • * Vendor
  • Posts: 278
  • Location: Asia
  • Yellows
Re: [GB] Noxary X60 (Shipping Form Inside - Shipping May 2017)
« Reply #1600 on: Mon, 22 May 2017, 10:05:57 »
Did you go with the same factory than 27?  :))

I could be wrong, but I thought a while back he said he was going with the place RAMA uses.

*Passed up on

Offline nickheller

  • Cherry ML life
  • * Destiny Supporter
  • Posts: 1573
  • Location: Earth
Re: [GB] Noxary X60 (Shipping Form Inside - Shipping May 2017)
« Reply #1601 on: Mon, 22 May 2017, 10:14:06 »
thought these were 3d printed ?
Gotcha. Those sacks look mouth watering.

Offline Khers

  • Posts: 455
  • Schrödinger's box
Re: [GB] Noxary X60 (Shipping Form Inside - Shipping May 2017)
« Reply #1602 on: Mon, 22 May 2017, 10:21:55 »
thought these were 3d printed ?
Nah, injection molded

Offline RobotMalcolmX

  • hackerman
  • Posts: 106
  • Location: SLC, UT
Re: [GB] Noxary X60 (Shipping Form Inside - Shipping May 2017)
« Reply #1603 on: Tue, 23 May 2017, 10:31:30 »
Any update about shipping?

Offline Khers

  • Posts: 455
  • Schrödinger's box
Re: [GB] Noxary X60 (Shipping Form Inside - Shipping May 2017)
« Reply #1604 on: Wed, 24 May 2017, 09:40:29 »
Any update about shipping?
What he said

Offline Unforgivable

  • Posts: 638
Re: [GB] Noxary X60 (Shipping Form Inside - Shipping May 2017)
« Reply #1605 on: Wed, 24 May 2017, 10:21:03 »
Any update about shipping?
What he said

Did he say this Monday? He meant next Monday! :p

Just teasing! :p

Offline poolside

  • Posts: 768
  • Location: On the deck
Re: [GB] Noxary X60 (Shipping Form Inside - Shipping May 2017)
« Reply #1606 on: Wed, 24 May 2017, 11:02:53 »
What kind of finish will be used on the brass switch plates?
« Last Edit: Wed, 24 May 2017, 11:35:10 by poolside »

Offline P1kas

  • Posts: 212
  • Location: Puerto Rico
  • AKA Crono
Re: [GB] Noxary X60 (Shipping Form Inside - Shipping May 2017)
« Reply #1607 on: Wed, 24 May 2017, 11:20:59 »
What kind of finish will be used on the brass plates?

Sand blasted weights. There are pictures a few pages back
There is no such thing as "too much orange."

Offline poolside

  • Posts: 768
  • Location: On the deck
Re: [GB] Noxary X60 (Shipping Form Inside - Shipping May 2017)
« Reply #1608 on: Wed, 24 May 2017, 11:36:01 »
What kind of finish will be used on the brass plates?

Sand blasted weights. There are pictures a few pages back

Sandblasted weights, yes, but I meant the switch plates.

Offline RobotMalcolmX

  • hackerman
  • Posts: 106
  • Location: SLC, UT
Re: [GB] Noxary X60 (Shipping Form Inside - Shipping May 2017)
« Reply #1609 on: Wed, 24 May 2017, 11:54:37 »
So you're active here on GH, active in keyboard community slack, aware that people are looking for updates, and decide that it's worth it to mess around with your keyboard still.

You're not doing anyone any favors just leaving us in the dark.

« Last Edit: Wed, 24 May 2017, 12:01:07 by RobotMalcolmX »

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 5198
  • Location: United Kingdom
Re: [GB] Noxary X60 (Shipping Form Inside - Shipping May 2017)
« Reply #1610 on: Wed, 24 May 2017, 12:02:03 »
No update yet. I'll post here when I know something.

It's worth noting this so you're aware of my state: I was at the arena attack on Monday and the emotions of it all are catching up. If I'm not communicating very well, it's because my head is all over the place. If I'm modding switches because it's therapeutic, then I will be.

The brass switch plates will be sand blasted. No other finish (brushed, polished, etc) have a more consistent finish than sand blasting.

Offline Malenky

  • Posts: 271
  • Location: United Kingdom
Re: [GB] Noxary X60 (Shipping Form Inside - Shipping May 2017)
« Reply #1611 on: Wed, 24 May 2017, 12:07:23 »
Stay well mate. I have friends who live very close to it and everyone is pretty shaken up.

Offline SixtyLife

  • Posts: 466
  • Location: New Jersey
Re: [GB] Noxary X60 (Shipping Form Inside - Shipping May 2017)
« Reply #1612 on: Wed, 24 May 2017, 12:08:59 »
glad you're ok dude
Kishsaver, JP SSK, Displaywriter SSK, 360C, HHKB Type S, X60, Jane v2, Jane v2 CE

Offline RobotMalcolmX

  • hackerman
  • Posts: 106
  • Location: SLC, UT
Re: [GB] Noxary X60 (Shipping Form Inside - Shipping May 2017)
« Reply #1613 on: Wed, 24 May 2017, 12:21:02 »
No update yet. I'll post here when I know something.

It's worth noting this so you're aware of my state: I was at the arena attack on Monday and the emotions of it all are catching up. If I'm not communicating very well, it's because my head is all over the place. If I'm modding switches because it's therapeutic, then I will be.

The brass switch plates will be sand blasted. No other finish (brushed, polished, etc) have a more consistent finish than sand blasting.

Three things.

First, I'm glad you're OK.

Second, no update is still an update you can give previously. Especially since you were hoping it would have shipped on Monday. Just let us know. Silence is what bugs people.

Third, I got banned on keyboardcommunity slack loooong long ago, not lurking there and I can share screenshots of anything posted there.

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 5198
  • Location: United Kingdom
Re: [GB] Noxary X60 (Shipping Form Inside - Shipping May 2017)
« Reply #1614 on: Wed, 24 May 2017, 12:35:49 »
I'm not going to come in every couple of days and tell you there is no update. I've done all I can; literally waiting for them to be shipped and arrive now. You know I'll post the moment I get them, it's always been that way.

Offline RobotMalcolmX

  • hackerman
  • Posts: 106
  • Location: SLC, UT
Re: [GB] Noxary X60 (Shipping Form Inside - Shipping May 2017)
« Reply #1615 on: Wed, 24 May 2017, 12:47:34 »
I'm not asking for an update every couple of days.

I'm asking for an update a week after an expected ship date when you said yourself you'd hope they would be shipping by Monday because they expected production to be finished Friday.

Don't try and say you don't have any responsibility now. You do. You're the person running the GB.

When you're still waiting for them to be shipped, just let us know. That still means they haven't run into any more issues and we can hope to see shipping in the next day or so.

When you don't respond at all people get worried.

Lots of people have put lots of money into this GB, and are entitled to updates "every couple of days" if they want them.
« Last Edit: Wed, 24 May 2017, 12:52:05 by RobotMalcolmX »

Offline fendent

  • * Maker
  • Posts: 251
  • Location: Cackalack
Re: [GB] Noxary X60 (Shipping Form Inside - Shipping May 2017)
« Reply #1616 on: Wed, 24 May 2017, 12:56:02 »
I'm not asking for an update every couple of days.

I'm asking for an update a week after an expected ship date when you said yourself you'd hope they would be shipping by Monday because they expected production to be finished Friday.

Don't try and say you don't have any responsibility now. You do. You're the person running the GB.

When you're still waiting for them to be shipped, just let us know. That still means they haven't run into any more issues and we can hope to see shipping in the next day or so.

When you don't respond at all people get worried.

Lots of people have put lots of money into this GB, and are entitled to updates "every couple of days" if they want them.

Maybe chill considering some extenuating circumstances here.

Offline doom2

  • Posts: 115
  • Location: Bodymore, Murdaland
Re: [GB] Noxary X60 (Shipping Form Inside - Shipping May 2017)
« Reply #1617 on: Wed, 24 May 2017, 12:58:21 »
Quote
entitled to updates

Lol.

Offline Malenky

  • Posts: 271
  • Location: United Kingdom
Re: [GB] Noxary X60 (Shipping Form Inside - Shipping May 2017)
« Reply #1618 on: Wed, 24 May 2017, 13:00:51 »
I'm sure you all heard about what happened here in the UK on Sunday night.

Please have some compassion and understand that logging on to Skype on Monday to speak to a contact in a Chinese factory was not first priority.
« Last Edit: Wed, 24 May 2017, 14:29:11 by Malenky »

Offline dgneo

  • Supervillain
  • * Curator
  • Posts: 2046
Re: [GB] Noxary X60 (Shipping Form Inside - Shipping May 2017)
« Reply #1619 on: Wed, 24 May 2017, 13:13:10 »
I'm not asking for an update every couple of days.

I'm asking for an update a week after an expected ship date when you said yourself you'd hope they would be shipping by Monday because they expected production to be finished Friday.

Don't try and say you don't have any responsibility now. You do. You're the person running the GB.


100% Agreed.
14KT Gold Slum Computer Wizard

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11224
  • Location: Campaign Trail
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] Noxary X60 (Shipping Form Inside - Shipping May 2017)
« Reply #1620 on: Wed, 24 May 2017, 13:16:36 »
entitled to updates

you're not entitled to anything, complaining never sped up a GB

have some empathy for once in your life.

caveat emptor

Xondat, chill out, take your time.
« Last Edit: Wed, 24 May 2017, 14:57:52 by Puddsy »
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Secret TKL?

Everything you have said in the past has been false so I will keep my hope.

Offline chilldude_22

  • Official streetman
  • Posts: 108
  • Location: South Dakota
Re: [GB] Noxary X60 (Shipping Form Inside - Shipping May 2017)
« Reply #1621 on: Wed, 24 May 2017, 13:18:08 »
Quote
entitled to updates

Lol.

Are people that have floated hundreds of dollars to support someone's project not entitled to know its status..? Don't think anyone's being unreasonable.

People can be sensitive toward Xondat, and he can still say "no updates yet, I'll let everyone know." Use some common sense and everyone will be happy.

Offline dgneo

  • Supervillain
  • * Curator
  • Posts: 2046
Re: [GB] Noxary X60 (Shipping Form Inside - Shipping May 2017)
« Reply #1622 on: Wed, 24 May 2017, 13:18:18 »

i'm from new york and whenever a plane flies over everyone in the room gets nervous.


lol what
14KT Gold Slum Computer Wizard

Offline Photoelectric

  • * Administrator
  • Posts: 6753
Re: [GB] Noxary X60 (Shipping Form Inside - Shipping May 2017)
« Reply #1623 on: Wed, 24 May 2017, 13:39:16 »
Mod note: the thread was not locked by us.  It has been, however, slightly cleaned up by us to remove the parts that resorted to name-calling, after receiving reports about them.

Personal note: it's considerate to provide updates on group buys if there are changes in the schedule, and people who've submitted payments have the right to ask for updates.  It should of course be done in a polite and reasonable manner (we've probably all seen people who start demanding things at the slight signs of trouble).
- Keyboards: LZ-GH (Jailhouse Blues)M65-a, MIRA SE, E8-V1, MOON TKL, CA66
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline Khers

  • Posts: 455
  • Schrödinger's box
Re: [GB] Noxary X60
« Reply #1624 on: Mon, 29 May 2017, 08:22:19 »
One week has passed since the proposed shipping date. Are they on their way yet? If not, why are they not?

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 5198
  • Location: United Kingdom
Re: [GB] Noxary X60
« Reply #1625 on: Mon, 29 May 2017, 08:32:01 »
One week has passed since the proposed shipping date. Are they on their way yet? If not, why are they not?

Not that I know of. I have no idea why, haven't had any communication due to the Dragon Boat Festival holiday that is Sat-Tue.

Offline Fictiouz

  • That "White" Guy
  • Posts: 465
  • Location: Halifax, NS, CA
  • "You miss 100% of the shots you take." -S. Trooper
Re: [GB] Noxary X60
« Reply #1626 on: Mon, 29 May 2017, 08:34:28 »
One week has passed since the proposed shipping date. Are they on their way yet? If not, why are they not?

Not that I know of. I have no idea why, haven't had any communication due to the Dragon Boat Festival holiday that is Sat-Tue.
Here's hoping for some good news by the end of the week then. 😁

Sent from my Pixel XL using Tapatalk
Halifax, NS Meetup | "I know you'll come back to me, I'm like a good kind of herpes, I'm impossible to get rid of." - 27
67g Zilent V2 M60-A | BKE Redux HHKB Professional 2 | 62g Silent Black Planck | 62g Vint Black Tex Yoda II | Bolt-Modded Model M 1391301

Offline Khers

  • Posts: 455
  • Schrödinger's box
Re: [GB] Noxary X60
« Reply #1627 on: Mon, 29 May 2017, 08:41:30 »
One week has passed since the proposed shipping date. Are they on their way yet? If not, why are they not?

Not that I know of. I have no idea why, haven't had any communication due to the Dragon Boat Festival holiday that is Sat-Tue.
Thanks for the update! Let's hope they get back to you on Wednesday then  :thumb:

Offline swimmingbird

  • * Elevated Elder
  • Posts: 2119
  • Location: Sydney, Australia
  • keyset hoarder
Re: [GB] Noxary X60
« Reply #1628 on: Mon, 29 May 2017, 18:55:40 »
Hope you're doing alright Xondat

Offline RobotMalcolmX

  • hackerman
  • Posts: 106
  • Location: SLC, UT
Re: [GB] Noxary X60
« Reply #1629 on: Thu, 01 June 2017, 16:33:26 »
So I know the holiday has been over for a few days now, any contact with the factory regarding updates?

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 5198
  • Location: United Kingdom
Re: [GB] Noxary X60
« Reply #1630 on: Thu, 01 June 2017, 18:08:58 »
For some stupid reason, the way they asked me to pay months ago isn't valid so they have to refund it and I send it a different way. I am currently waiting for that refund. Something to do with "so long production time through Alibaba". Yeah, I'm not sure either.

I also got a random picture of a mismatched case with a weight in from when they test fit stuff.

[redacted]
« Last Edit: Fri, 11 August 2017, 12:38:07 by xondat »

Offline Fictiouz

  • That "White" Guy
  • Posts: 465
  • Location: Halifax, NS, CA
  • "You miss 100% of the shots you take." -S. Trooper
Re: [GB] Noxary X60
« Reply #1631 on: Thu, 01 June 2017, 18:11:53 »
For some stupid reason, the way they asked me to pay months ago isn't valid so they have to refund it and I send it a different way. I am currently waiting for that refund. Something to do with "so long production time through Alibaba". Yeah, I'm not sure either.

I also got a random picture of a mismatched case with a weight in from when they test fit stuff.

Show Image

Bummed about another delay, but on the plus side the board looks damn good.

Sent from my Pixel XL using Tapatalk
Halifax, NS Meetup | "I know you'll come back to me, I'm like a good kind of herpes, I'm impossible to get rid of." - 27
67g Zilent V2 M60-A | BKE Redux HHKB Professional 2 | 62g Silent Black Planck | 62g Vint Black Tex Yoda II | Bolt-Modded Model M 1391301

Offline FoC_Tow

  • * Destiny Supporter
  • Posts: 1121
  • Location: Germany
  • Brokehlicious
Re: [GB] Noxary X60
« Reply #1632 on: Fri, 02 June 2017, 17:42:24 »
Thx for the update xondat!

Im patient and generally confident in your work so I really don't mind delays much.

Having something delayed for the sake of fixing production issues will translate into a more polished product which is all that matters imo. =)

Offline smittysteve

  • Posts: 538
  • Location: Erie, CO
  • Tea > Coffee. Clack > Thwock.
Re: [GB] Noxary X60
« Reply #1633 on: Fri, 02 June 2017, 18:01:35 »
Agreed- confidence is strong this is going to be a freaky-good keyboard when all is said and done. Appreciate the update and I hope all is ok in your world, Xondat.

Also- still REALLY hoping to swap a gray HHKB top for a Winkeyless. Would sweeten the deal in any way possible if that helps. $20 Paypal to help with your soon to come shipping invoice, perhaps?  :thumb:

Offline MMKB

  • Posts: 373
  • Location: NorCal
Re: [GB] Noxary X60
« Reply #1634 on: Fri, 02 June 2017, 18:45:37 »
For some stupid reason, the way they asked me to pay months ago isn't valid so they have to refund it and I send it a different way. I am currently waiting for that refund. Something to do with "so long production time through Alibaba". Yeah, I'm not sure either.

I also got a random picture of a mismatched case with a weight in from when they test fit stuff.

Show Image


Looking at that weight, it could totally be my everyday carry between home and work.
        

Only thing we can predict about GBs is that GBs are unpredictable

Offline BunnyLake

  • The OG HHKB Master
  • * Maker
  • Posts: 7234
  • X
    • [CTRL]ALT
Re: [GB] Noxary X60
« Reply #1635 on: Sat, 03 June 2017, 03:46:50 »
For some stupid reason, the way they asked me to pay months ago isn't valid so they have to refund it and I send it a different way. I am currently waiting for that refund. Something to do with "so long production time through Alibaba". Yeah, I'm not sure either.

I also got a random picture of a mismatched case with a weight in from when they test fit stuff.

Show Image


thanks for sharing the update sir, sorry you are suffering these delays form the factory, all the hard work is super appreciated
I'M IN THE PROCESS OF MOVING RIGHT NOW, WILL BE BACK AROUND SOON

Offline RocketGruntJake

  • Posts: 125
  • Brb, gotta grow some flowers
Re: [GB] Noxary X60
« Reply #1636 on: Wed, 07 June 2017, 09:34:57 »
Case is looking amazing, any updates as of today?

For those of us that have not been invoiced for shipping, when is that going to be taking place?

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 5198
  • Location: United Kingdom
Re: [GB] Noxary X60
« Reply #1637 on: Wed, 07 June 2017, 10:06:26 »
I have a tracking number, but it doesn't work. According to the manu who talked to the courier, the tracking will work once it reaches the Netherlands, which should be any day now as its 6-8 days (and was picked up Friday). I'm just waiting around for proof that they're on the way.

Offline NolaSwag

  • Posts: 29
  • Location: Louisiana
  • high quality metals and expensive plastic
Re: [GB] Noxary X60
« Reply #1638 on: Wed, 07 June 2017, 11:54:59 »
I have a tracking number, but it doesn't work. According to the manu who talked to the courier, the tracking will work once it reaches the Netherlands, which should be any day now as its 6-8 days (and was picked up Friday). I'm just waiting around for proof that they're on the way.
Hell yea! The home stretch boys
Orange60 | X60 | M60-A | Polaris

Offline Fictiouz

  • That "White" Guy
  • Posts: 465
  • Location: Halifax, NS, CA
  • "You miss 100% of the shots you take." -S. Trooper
Re: [GB] Noxary X60
« Reply #1639 on: Wed, 07 June 2017, 11:56:27 »
Hope everything goes according to plan. Been waiting to long for this sexy board

Sent from my Pixel XL using Tapatalk

Halifax, NS Meetup | "I know you'll come back to me, I'm like a good kind of herpes, I'm impossible to get rid of." - 27
67g Zilent V2 M60-A | BKE Redux HHKB Professional 2 | 62g Silent Black Planck | 62g Vint Black Tex Yoda II | Bolt-Modded Model M 1391301

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 5198
  • Location: United Kingdom
Re: [GB] Noxary X60
« Reply #1640 on: Wed, 07 June 2017, 12:05:48 »
Oh and I'll resume invoicing once parts arrive, this includes extra plates.

Offline megaforce

  • Formerly megaforce93
  • Posts: 941
Re: [GB] Noxary X60
« Reply #1641 on: Wed, 07 June 2017, 12:10:58 »
all according to keikaku.
Corsair K95 | Corsair K63 Wireless | Razer Huntsman Elite
More
910 CE | Jane CE| Jane V2 | Jane V2 CE | X60R1 |  HHKB JP JustSystems Hi Pro | Nunu | TKL-My Little Demon | Houksai
LZ MX | LZ FE | LZ CLS TKL Silver |LZ CLS TKL Gray| LZ St | V.EA | Blackbird | LSV3 | OctagonV2 | Norbatouch | X60 | TX84 | Kyuu | SSK | 268.1

Offline RocketGruntJake

  • Posts: 125
  • Brb, gotta grow some flowers
Re: [GB] Noxary X60
« Reply #1642 on: Wed, 07 June 2017, 12:16:19 »
Thanks for the update man!
So insanely excited to build this bad boy. How long do you have planned to ship them all out to participants?

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 5198
  • Location: United Kingdom
Re: [GB] Noxary X60
« Reply #1643 on: Wed, 07 June 2017, 12:35:52 »
How long do you have planned to ship them all out to participants?

I'm planning to get the first 4 (to test packaging) out the day after I receive the shipment, they'll arrive next day, and hopefully if all is good I can start sending more out. So in something easier to understand:
  • Day 1 - receive shipment, QC begins
  • Day 2 - 4 UK boards out, QC continues
  • Day 3 - 4 UK boards received and approved, QC continues
  • Day 4 - All other boards start going out
If the packaging isn't approved, then I'll be sorting that as quickly as I can, but I do have custom double walled boxes + hundreds of metres of foam wrap on the way.

Obviously it's hard to say how many can be shipped a day, but I'll have 2 others helping me QC the boards (each part will be checked 4 times) and perhaps helping make packing quicker (getting boxes/foam wrap ready). I'm planning on seeing each part twice, assembling the boards, packaging them, and printing labels for every single board. Should be a fun learning curve.

Offline RocketGruntJake

  • Posts: 125
  • Brb, gotta grow some flowers
Re: [GB] Noxary X60
« Reply #1644 on: Wed, 07 June 2017, 13:42:59 »
How long do you have planned to ship them all out to participants?

I'm planning to get the first 4 (to test packaging) out the day after I receive the shipment, they'll arrive next day, and hopefully if all is good I can start sending more out. So in something easier to understand:
  • Day 1 - receive shipment, QC begins
  • Day 2 - 4 UK boards out, QC continues
  • Day 3 - 4 UK boards received and approved, QC continues
  • Day 4 - All other boards start going out
If the packaging isn't approved, then I'll be sorting that as quickly as I can, but I do have custom double walled boxes + hundreds of metres of foam wrap on the way.

Obviously it's hard to say how many can be shipped a day, but I'll have 2 others helping me QC the boards (each part will be checked 4 times) and perhaps helping make packing quicker (getting boxes/foam wrap ready). I'm planning on seeing each part twice, assembling the boards, packaging them, and printing labels for every single board. Should be a fun learning curve.

Thanks for the very very detailed response

From selling artisans I can say that the packing step takes a lot longer than you expect. Especially when there are several options/component combos needed. Good luck man.

Keep up the awesome work Xondat, so close to the end<3

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 5198
  • Location: United Kingdom
Re: [GB] Noxary X60
« Reply #1645 on: Thu, 08 June 2017, 05:58:38 »
[redacted]
« Last Edit: Fri, 11 August 2017, 12:37:53 by xondat »

Offline joey

  • Posts: 2292
  • Location: UK
Re: [GB] Noxary X60
« Reply #1646 on: Thu, 08 June 2017, 06:01:17 »
**** got real :thumb:

Offline wodan

  • Posts: 548
Re: [GB] Noxary X60
« Reply #1647 on: Thu, 08 June 2017, 07:19:14 »
#****sout for X-out

Offline Fictiouz

  • That "White" Guy
  • Posts: 465
  • Location: Halifax, NS, CA
  • "You miss 100% of the shots you take." -S. Trooper
Re: [GB] Noxary X60
« Reply #1648 on: Thu, 08 June 2017, 07:29:12 »
Well this is a pleasant surprise to wake up to.

Sent from my Pixel XL using Tapatalk
Halifax, NS Meetup | "I know you'll come back to me, I'm like a good kind of herpes, I'm impossible to get rid of." - 27
67g Zilent V2 M60-A | BKE Redux HHKB Professional 2 | 62g Silent Black Planck | 62g Vint Black Tex Yoda II | Bolt-Modded Model M 1391301

Offline Malenky

  • Posts: 271
  • Location: United Kingdom
Re: [GB] Noxary X60
« Reply #1649 on: Thu, 08 June 2017, 07:29:44 »
So hyped! Thanks for all the hard work bro.