Yeah unfortunatly you are wrong.
You have to change these switches, but you also have to change the stabilizers position, which is usually not possible with the keyboard soldered because you have a little space to work with.
You have to remove the stab on on the enter iso and put it in the ansi enter direction, you also have to do the same with left shift, this misses the stabilizer. For right shift you are fine already, this one should be the standard ansi 96 keeb.
You can try to do what i said, desolder some switches in the area of the stabilizer and try to lift/bend slightly the pcb and plate, to give you more space and maybe you will be allowed to remove and insert again the stabilizer without the necessity to desolder all tbe switches.
Of course every time you desolder a switch, you also have to desolder the led.
You might try to ask for a soldering/desoldering service if you are in the US (someone on /r/mechmarket might do it for you)