Author Topic: [GB] ALF DC60 (99% shipped)  (Read 33516 times)

teobeo94 and 3 Guests are viewing this topic.

Offline ilouis_07

  • Thread Starter
  • Posts: 445
  • Location: Singapore
  • 不忘初心
Re: [GB] ALF DC60 (80% shipped)
« Reply #350 on: Mon, 19 November 2018, 07:10:30 »
Hi all,

I received an incorrect order and Iím trying to find who got it so I can trade.

Did anyone order a: Purple Case, Brass Plate

But, instead received a: Everest White Case, PCB, Brass Plate

If you did, please let me know so we can swap. Thanks!


Sent from my iPhone using Tapatalk
Hi i already solved the problem for you. Pls pm me on discord !

Offline rn00175

  • Posts: 10
  • Location: US
  • Broke student forcing himself into the hobby
Re: [GB] ALF DC60 (80% shipped)
« Reply #351 on: Mon, 19 November 2018, 17:36:45 »
Ordered myself an Everest White but got myself a Black case.

Anyone ordered a Black case and got a White one?

Contact me on discord: RN00175#5813 or PM me if you do and am willing to trade it.

Offline DocNoc

  • Posts: 43
Re: [GB] ALF DC60 (80% shipped)
« Reply #352 on: Mon, 19 November 2018, 17:46:22 »
My package came in with my correct order had a minor issue that Louis fixed immediately. I hope everyone gets their order mix up resolved and I can't wait to see pictures of everyone's builds!

Offline Justin_aka_OsP_SSJ4

  • Posts: 58
  • Location: Melbourne, Down under
  • Chellow... it's me...
    • My Twitch
Re: [GB] ALF DC60 (80% shipped)
« Reply #353 on: Wed, 21 November 2018, 16:02:50 »
Hard to tell what % of people have incorrect orders. I check discord daily and it's always just a handful of people, but that is just discord. I am hoping for Alf and everyone elses sake that mistakes are not wide spread. My ordered was incorrect I am hoping the community comes together and does the right thing and redirects their orders properly.

Louis has been very responsive with PM's so I have faith everyone will be sorted out.

Anyone who receives.

- Purple DC60.
- Dark grey/greenish DC60
- Dark grey plate.

Message me please :(
« Last Edit: Wed, 21 November 2018, 21:11:04 by Justin_aka_OsP_SSJ4 »
XD60 w/ DZ60 PCB & Steel plate w/ 3mm neoprene foam - 68g Chellows Lubed w/ 3204 - Find me on twitch/twitter Osprey_SSJ4

Offline tkeatingt

  • Posts: 1
Re: [GB] ALF DC60 (80% shipped)
« Reply #354 on: Thu, 22 November 2018, 08:06:19 »
Got mine today, all correct, looks and feels amazing!

I hope this isn't a dumb question, but what do I need to unscrew the screws? It looks like hex head, but I don't have any that are small enough for it. Hoping that someone can tell me so I can buy what I need correctly the first time  :))

Online jobicoppola

  • Posts: 5
  • Location: Charlotte
Re: [GB] ALF DC60 (80% shipped)
« Reply #355 on: Thu, 22 November 2018, 09:13:43 »
I used torx T6, worked fine.

Offline ilouis_07

  • Thread Starter
  • Posts: 445
  • Location: Singapore
  • 不忘初心
Re: [GB] ALF DC60 (80% shipped)
« Reply #356 on: Thu, 22 November 2018, 19:35:03 »
Got mine today, all correct, looks and feels amazing!

I hope this isn't a dumb question, but what do I need to unscrew the screws? It looks like hex head, but I don't have any that are small enough for it. Hoping that someone can tell me so I can buy what I need correctly the first time  :))
black friday sales: https://www.amazon.com/ORIA-Screwdriver-Precision-Professional-Smartphone/dp/B0769HJL5Y/ref=gbps_img_m-9_62c3_8963f446?smid=A2FOADTO08BQD0&pf_rd_p=4d52f7fa-20b0-4bf9-a290-13e96d3f62c3&pf_rd_s=merchandised-search-9&pf_rd_t=101&pf_rd_i=15529609011&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=JG0G6FM22VC1BJXXFSNF

Offline iliketimex

  • Posts: 63
Re: [GB] ALF DC60 (99% shipped)
« Reply #357 on: Mon, 26 November 2018, 11:44:41 »
Received my shipment on Saturday (east coast USA). Looks good, surprised how heavy the case is. The black pads on the bottom are much nicer than clear pads for this black case. Good GB.

Offline ensulyn

  • Posts: 26
  • Location: Washington
  • I make sawdust
Re: [GB] ALF DC60 (99% shipped)
« Reply #358 on: Tue, 27 November 2018, 20:48:05 »
Ordered a white dc60 and got a purple case, please resolve.

Online MMKB

  • Posts: 261
  • Location: NorCal
Re: [GB] ALF DC60 (99% shipped)
« Reply #359 on: Thu, 29 November 2018, 00:01:55 »
207936-0
 ;) Built with Halo Clears. Sorbothane-ed of course
   

Offline Justin_aka_OsP_SSJ4

  • Posts: 58
  • Location: Melbourne, Down under
  • Chellow... it's me...
    • My Twitch
Re: [GB] ALF DC60 (99% shipped)
« Reply #360 on: Thu, 29 November 2018, 19:03:33 »
Damn that looks so nice mate.
XD60 w/ DZ60 PCB & Steel plate w/ 3mm neoprene foam - 68g Chellows Lubed w/ 3204 - Find me on twitch/twitter Osprey_SSJ4

Offline mikenogo

  • Posts: 83
  • Location: Canada, ON
Re: [GB] ALF DC60 (99% shipped)
« Reply #361 on: Mon, 03 December 2018, 00:44:53 »
(Attachment Link)
 ;) Built with Halo Clears. Sorbothane-ed of course

Which brass plate did you use? The one that it came with doesn't have 7u spacebar support :(

Online MMKB

  • Posts: 261
  • Location: NorCal
Re: [GB] ALF DC60 (99% shipped)
« Reply #362 on: Mon, 03 December 2018, 17:40:50 »
(Attachment Link)
 ;) Built with Halo Clears. Sorbothane-ed of course

Which brass plate did you use? The one that it came with doesn't have 7u spacebar support :(

I had the same problem with the DC60 brass plate so ended up using a spare KBDfans plate.
   

Offline Justin_aka_OsP_SSJ4

  • Posts: 58
  • Location: Melbourne, Down under
  • Chellow... it's me...
    • My Twitch
Re: [GB] ALF DC60 (99% shipped)
« Reply #363 on: Mon, 03 December 2018, 21:06:25 »
Hey everyone,

Alot of people have been having order issues. It's been going on for weeks. Louis is trying to coordinate everyone and resolve it all in a big batch.

If you received the incorrect order, dont have tracking, havent received your order or anything else join this discord server.

https://discord.gg/n6x8Cvh

PLEASE ONLY JOIN IF YOU HAVE ISSUES WITH YOUR DC60 order
XD60 w/ DZ60 PCB & Steel plate w/ 3mm neoprene foam - 68g Chellows Lubed w/ 3204 - Find me on twitch/twitter Osprey_SSJ4

Offline oldcat

  • Posts: 890
Re: [GB] ALF DC60 (99% shipped)
« Reply #364 on: Sat, 29 December 2018, 12:13:43 »
Amazing DC60 build:

$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Online RETURNISO

  • Posts: 133
  • Location: ISO
Re: [GB] ALF DC60 (99% shipped)
« Reply #365 on: Sat, 29 December 2018, 13:20:37 »
Amazing DC60 build:


Lol some similarities :p ( sry off topic ) :cool:


Offline oldcat

  • Posts: 890
Re: [GB] ALF DC60 (99% shipped)
« Reply #366 on: Sat, 29 December 2018, 19:33:27 »
(Attachment Link)
 ;) Built with Halo Clears. Sorbothane-ed of course

Amazing, so clean
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Offline Hokabuki

  • Posts: 118
Re: [GB] ALF DC60 (99% shipped)
« Reply #367 on: Sat, 29 December 2018, 20:08:17 »
Waiting to build mine until the titanium plate comes in!

Offline Create_alt_delete

  • Posts: 25
  • Location: Georgia, USA
Re: [GB] ALF DC60 (99% shipped)
« Reply #368 on: Wed, 09 January 2019, 17:30:25 »
There are no layouts for the DC60 on https://config.qmk.fm/#/alf/dc60/
(Even though Alf's own website says there are -- https://alfstudio.club/dc60firmware/)

I tried flashing mine with a DZ60 layout, thinking it was similar enough, and that turned the board into a paperweight.
Does anyone have the DC60 firmware?

Edit: I was able to build firmware using the .json on Alf's site. Would still be nice if it were uploaded to QMK Configuration.
« Last Edit: Wed, 09 January 2019, 17:49:49 by Create_alt_delete »

Offline SteffeMK

  • Posts: 42
Re: [GB] ALF DC60 (99% shipped)
« Reply #369 on: Thu, 10 January 2019, 05:13:18 »
There are no layouts for the DC60 on https://config.qmk.fm/#/alf/dc60/
(Even though Alf's own website says there are -- https://alfstudio.club/dc60firmware/)

I tried flashing mine with a DZ60 layout, thinking it was similar enough, and that turned the board into a paperweight.
Does anyone have the DC60 firmware?

Edit: I was able to build firmware using the .json on Alf's site. Would still be nice if it were uploaded to QMK Configuration.
On config.qmk.fm the pcb is called Alf_dc60,

Skickat frŚn min ONEPLUS A6013 via Tapatalk


Offline Justin_aka_OsP_SSJ4

  • Posts: 58
  • Location: Melbourne, Down under
  • Chellow... it's me...
    • My Twitch
Re: [GB] ALF DC60 (99% shipped)
« Reply #370 on: Thu, 10 January 2019, 18:17:34 »
Unfortunately the DC60 group buy has been a nightmare.

I always give people the benefit of the doubt and there were some legitimate unavoidable delays last year. But the list of delays with little to no explanation is very long.

I received an incorrect order on the 21st of November (cases reported as finished and in Alf's possession in September for reference). Louis did a great job creating a private group for people with incorrect orders (over 30) todo swaps and try to rectify the issues. The swaps covered approx 10 people of the 30. Shipping paid for by Alf :)

For me personally I could not resolve my issues with swaps. After a week of negotiations on the 6th of Dec I resubmitted my shipping details for the replacement cases that had either never been made or disappeared. I was happy with the resolution which was to accept 1 case not of the finish I ordered and a Bstock case (I ordered 2 cases originally) with a partial refund for the missing plate and the compromise of a bstock case.

Originally manufacture of replacements was said not to be an option which is why I accepted a Bstock case in the finish I wanted as a replacement.

So the cases promised to me were left overs and defective units, on hand from manufacturing months prior. It is now the 11th of January over 1 month since those cases were promised which have not been shipped. The reason for the delay was that Alf did not want to make more than one trip to ship cases and I would have to wait for the manufacture of other peoples cases before mine would be shipped.

It seems Alf has plenty of time to create new group buys and accept money. But not enough to make a trip to the post office to rectify his mistakes from months ago.

Some will say.

"gRoUp BuYs AlWaYs HaVe DeLaYs" frankly this is an apologists attitude and mistakes of the past are something to be learned from. Not used as justification.

*Edit.

I would also like to add that currently iLouis the gb runner (who has done his best) was the middle man for exchanging money. Currently all refunds and reimbursed extra shipping costs have been taken care of by him and not Alf.
« Last Edit: Thu, 10 January 2019, 19:26:00 by Justin_aka_OsP_SSJ4 »
XD60 w/ DZ60 PCB & Steel plate w/ 3mm neoprene foam - 68g Chellows Lubed w/ 3204 - Find me on twitch/twitter Osprey_SSJ4

Offline Hokabuki

  • Posts: 118
Re: [GB] ALF DC60 (99% shipped)
« Reply #371 on: Thu, 10 January 2019, 19:59:58 »
Unfortunately the DC60 group buy has been a nightmare.

I always give people the benefit of the doubt and there were some legitimate unavoidable delays last year. But the list of delays with little to no explanation is very long.

I received an incorrect order on the 21st of November (cases reported as finished and in Alf's possession in September for reference). Louis did a great job creating a private group for people with incorrect orders (over 30) todo swaps and try to rectify the issues. The swaps covered approx 10 people of the 30. Shipping paid for by Alf :)

For me personally I could not resolve my issues with swaps. After a week of negotiations on the 6th of Dec I resubmitted my shipping details for the replacement cases that had either never been made or disappeared. I was happy with the resolution which was to accept 1 case not of the finish I ordered and a Bstock case (I ordered 2 cases originally) with a partial refund for the missing plate and the compromise of a bstock case.

Originally manufacture of replacements was said not to be an option which is why I accepted a Bstock case in the finish I wanted as a replacement.

So the cases promised to me were left overs and defective units, on hand from manufacturing months prior. It is now the 11th of January over 1 month since those cases were promised which have not been shipped. The reason for the delay was that Alf did not want to make more than one trip to ship cases and I would have to wait for the manufacture of other peoples cases before mine would be shipped.

It seems Alf has plenty of time to create new group buys and accept money. But not enough to make a trip to the post office to rectify his mistakes from months ago.

Some will say.

"gRoUp BuYs AlWaYs HaVe DeLaYs" frankly this is an apologists attitude and mistakes of the past are something to be learned from. Not used as justification.

*Edit.

I would also like to add that currently iLouis the gb runner (who has done his best) was the middle man for exchanging money. Currently all refunds and reimbursed extra shipping costs have been taken care of by him and not Alf.
Mine was shipped to the wrong address after I got a confirmation email from Louis that they had the correct. I was lucky enough to pick my board up after swinging by the incorrect address. I didnít realize how badly some peopleís orders were messed up.

Offline Justin_aka_OsP_SSJ4

  • Posts: 58
  • Location: Melbourne, Down under
  • Chellow... it's me...
    • My Twitch
Re: [GB] ALF DC60 (99% shipped)
« Reply #372 on: Thu, 10 January 2019, 20:34:43 »
Mine was shipped to the wrong address after I got a confirmation email from Louis that they had the correct. I was lucky enough to pick my board up after swinging by the incorrect address. I didnít realize how badly some peopleís orders were messed up.
Phew. Close call.

It's all been going on privately for months now. Barely anything in public.

Funny I just got tagged by Alf that my replacements have been shipped... spooky timing. But my post is still relevant.
XD60 w/ DZ60 PCB & Steel plate w/ 3mm neoprene foam - 68g Chellows Lubed w/ 3204 - Find me on twitch/twitter Osprey_SSJ4

Offline unausgeschlafen

  • Posts: 5
  • Location: Germany
Re: [GB] ALF DC60 (99% shipped)
« Reply #373 on: Fri, 11 January 2019, 03:10:53 »
This is rly a long time. I totally feel everyone that did not get their order, yet. I  am still waiting for my case to arrive. 
My order was shipped out (in the first by already delayed batch) and had only the name on the address label was wrong.  I correctly got the request to pay customs by phone, so I did. Well the parcel service obviously could not find anyone living by the given name living at that address (he also is a customer but from another country) and shipped the case *back* to ALF.
ALF did personally promise to not let me wait for weeks. Well, now (one month later) I am trying to get a hold of him, again.

I originally wanted to get into the g60 group buy and used the dc60 as an in-between. however after how this went down..... I'm afraid that was my last gb from ALF. I paid in full, I paid customs, and still have no board, months after the promised delivery date. 

I just wanted to put my +1 out there. This is another messed up order.

Offline Pluto19

  • Posts: 17
  • Location: Socal
Re: [GB] ALF DC60 (99% shipped)
« Reply #374 on: Sun, 13 January 2019, 03:08:31 »
Louis is my hero. Dude's a stand-up guy who took care of me as if I were his kid. Although I was around a month or so late to the "where's my DC60?" party, Louis and I got everything resolved in 6 days (December 7 - 15) from start to finish. It saddens me he had to have his GB tainted by ALF's logistical nightmare and lack of communication.

TL;DR
Louis is a homie.
Will participate from another Louis GB.
Will not participate in any ALF-shipped GB.