« previous next »
Pages:  [1]     Go Down

Author Topic: Components needed for Orion v2 PCB?  (Read 2152 times)

0 Members and 1 Guest are viewing this topic.

Offline Venatorious

  • Thread Starter
  • Posts: 244
  • Location: Dallas,Texas
  • Gotta Start Somewhere
Components needed for Orion v2 PCB?
« on: Thu, 22 November 2018, 16:46:32 »
I have my blue alps Orion v2 PCB and finally want to use it but I notice when I plug it in it doesn't register.  Do I need additional components?  I have to be a bother but it has been quite a long time since I've done modding on keyboards and honestly don't remember much  :confused:

Can anyone here help me out?  Also happy thanksgiving yall  :p

207605-0
207607-1
207609-2
207611-3
Logged

Offline Lanrefni

  • Posts: 117
Re: Components needed for Orion v2 PCB?
« Reply #1 on: Fri, 23 November 2018, 17:24:41 »
Looks like you don't have the diodes for each switch soldered on.
Logged

Offline Sup

  • * Exquisite Elder
  • Posts: 1354
  • Doing university was a mistake
Re: Components needed for Orion v2 PCB?
« Reply #2 on: Fri, 23 November 2018, 17:38:42 »
Quote from: Lanrefni on Fri, 23 November 2018, 17:24:41
Looks like you don't have the diodes for each switch soldered on.
yup that is the issue.
Logged
current
Filco Zero -  NOS Yellow Alps | Canoe R1 Gateron Red | AEK II JP Cream dampend |Filco Majestouch 2 Tex case Gateron Yellow | HHKB Pro 1 2003 Rev AO Serial 000171 | HHKB Pro 1 2003 Rev A1s|DZ60 OG Panda's with Fei spring and stem. | Sentraq S65_Plus OG Invyr Panda's | A17 Gateron Black TX 65G 3204 | Lubrigrante Wildcard Cherry MX silent blacks 3204 58.5G Springs | Rukia Everglide Tourmaline Blue 58.5G Springs | MGA Standard Greetech brown |
Coming soon
Rest in peace Billy Herrington(William Glen Harold Herrington) 1969-2018
Rest in peace Byron Daniel 1989-2020

Offline Venatorious

  • Thread Starter
  • Posts: 244
  • Location: Dallas,Texas
  • Gotta Start Somewhere
Re: Components needed for Orion v2 PCB?
« Reply #3 on: Sat, 24 November 2018, 11:30:11 »
Which exact diodes do I need and where can I get them? Thank dudes
Logged

Offline Sup

  • * Exquisite Elder
  • Posts: 1354
  • Doing university was a mistake
Re: Components needed for Orion v2 PCB?
« Reply #4 on: Sat, 24 November 2018, 12:41:51 »
Quote from: Venatorious on Sat, 24 November 2018, 11:30:11
Which exact diodes do I need and where can I get them? Thank dudes

You would need a smd diode. Example https://www.digikey.com/product-detail/en/diodes-incorporated/1N4148W-7-F/1N4148W-FDICT-ND/815280. I don't know which one people use for keyboards but it shouldn't matter that much.
Logged
current
Filco Zero -  NOS Yellow Alps | Canoe R1 Gateron Red | AEK II JP Cream dampend |Filco Majestouch 2 Tex case Gateron Yellow | HHKB Pro 1 2003 Rev AO Serial 000171 | HHKB Pro 1 2003 Rev A1s|DZ60 OG Panda's with Fei spring and stem. | Sentraq S65_Plus OG Invyr Panda's | A17 Gateron Black TX 65G 3204 | Lubrigrante Wildcard Cherry MX silent blacks 3204 58.5G Springs | Rukia Everglide Tourmaline Blue 58.5G Springs | MGA Standard Greetech brown |
Coming soon
Rest in peace Billy Herrington(William Glen Harold Herrington) 1969-2018
Rest in peace Byron Daniel 1989-2020

Offline Delirious

  • Posts: 322
Re: Components needed for Orion v2 PCB?
« Reply #5 on: Sat, 24 November 2018, 14:15:27 »
Logged

Offline Venatorious

  • Thread Starter
  • Posts: 244
  • Location: Dallas,Texas
  • Gotta Start Somewhere
Re: Components needed for Orion v2 PCB?
« Reply #6 on: Sat, 24 November 2018, 14:48:30 »
Quote from: Sup on Sat, 24 November 2018, 12:41:51
Quote from: Venatorious on Sat, 24 November 2018, 11:30:11
Which exact diodes do I need and where can I get them? Thank dudes

You would need a smd diode. Example https://www.digikey.com/product-detail/en/diodes-incorporated/1N4148W-7-F/1N4148W-FDICT-ND/815280. I don't know which one people use for keyboards but it shouldn't matter that much.
Ok sweet, gonna be a ***** soldering every single one of these but I got the time.

Quote from: Delirious on Sat, 24 November 2018, 14:15:27
https://www.ebay.com/itm/201672438110
Thanks Delirious imma order these right now

Logged

Offline Venatorious

  • Thread Starter
  • Posts: 244
  • Location: Dallas,Texas
  • Gotta Start Somewhere
Re: Components needed for Orion v2 PCB?
« Reply #7 on: Sun, 02 December 2018, 15:09:33 »
I am soldering this on the right way correct?  Here is the datasheet for the diode:  https://www.onsemi.com/pub/Collateral/LL4148-D.pdf
It's a little unclear since there are two lines on the diode I figure the one to mark polarity is the black one as shown on the schematic.

208212-0

I don't need to do anything with these unless I want to use the LED spots correct?  I assume those are spots for resistors?

208214-1

 


Logged

Offline suicidal_orange

  • * Global Moderator
  • Posts: 4771
  • Location: England
Re: Components needed for Orion v2 PCB?
« Reply #8 on: Sun, 02 December 2018, 15:19:53 »
The black lines on the diodes go on the thick ends of the PCB markings so you're good.

Rx pads are for LED resistors so you don't need them unless you want them.  There are some empty diode pads in the pic too which will need filling...
Logged
120/100g linear Zealio R1  
GMK Hyperfuse
'Split everything' perfection   		MX Clear
SA Hack'd by Geeks     
EasyAVR mod

Offline Venatorious

  • Thread Starter
  • Posts: 244
  • Location: Dallas,Texas
  • Gotta Start Somewhere
Re: Components needed for Orion v2 PCB?
« Reply #9 on: Sun, 02 December 2018, 21:38:20 »
Quote from: suicidal_orange on Sun, 02 December 2018, 15:19:53
The black lines on the diodes go on the thick ends of the PCB markings so you're good.

Rx pads are for LED resistors so you don't need them unless you want them.  There are some empty diode pads in the pic too which will need filling...

I haven't actually done all of it yet, didn't want to do it all wrong and have to desolder the whole board  ;D

I guess I'll ignore the LED's for now... Don't really need them I appreciate the help mate
Logged
Pages:  [1]     Go Up
« previous next »