So I recently acquired some clicky SKCM switches and they are exhibiting some rather annoying issue after I disassembled them for cleaning; I didn't test them before cleaning them, so I can't say for sure if disassembling them has anything to do with the problem.
About of four fifths of the switches exhibits doubling clicking, where instead of only clicking once on down stroke, they produces a really noticeable clicking on the return as well, much like clickbar switches. The other issue I'm having is that a good amount of the switches also have a really strange feel where during pre-travel, the switch will felt like encountering a tiny bump just before reaching the tactile point; same problem with the return travel just after the click leaf 'reset', this causes the switches to feel very unrefined and 'itchy' feeling, if that makes any sense. Some of the switches exhibit both symptoms.
So far I've tried pin point or fix the issue myself, largely to no avail though. I've swapped some Matias click leaf into the Alps housing and vice versa, but both combination exhibit some degree of this issue as well, so it appears to that this is not the issue with click leaf. I've also linear modded the switch to gauge the condition of the housing, but the switches are smooth so worn out housing is out of the equation (unless smoothness if not the only indicator of housing condition), now I'm at a lost for the cause to the issue. I also tried to fix the issue lightly greasing the click leaf leg and using paper mod to hold the leaf in place, but none of these works in anyway. So far the only method that yield any result is rotating the part around to match the right combination (learned this method here, but forgot which page), and I got some switches fixed but it is still a long way to go, and to be completely honest I can't tell for sure if this method is truly working or if it's just experiencing placebo.
So, anyone here ever encounter similar problem with clickly SKCM switches before? If so, any suggestion on remedy or is there any other way to pin point the issue?
Thx in advance
TL;DR -- doubling clicking and double bump on up-stroke and down-stroke; housing and click leaf unlikely to be the issue, please send help