Hmmmm I am so lost trying to figure out how to configure this. There wouldn't happen to be a detailed walk thought on how to set this up anywhere would there?.
Anyways I guess the main thing I am trying to figure out is how to configure the matrix and and pin out for a teensy 2. I assume that I can use the common files to make a new keyboard setup or one of the other keyboards that are on there but i don't know how to change the number of rows and columns. This may take me longer then making the keyboard at this rate lol
the following is assuming your using the gh60 folder as a base to edit.
edit config.h for this area...
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 14
look at the matrix.c in the gh60 folder. it was the most straightforward one for me to look at.
assign your pins to the row/cols
one of the functions automatically determines the amount of keys are in your matrix based on the assignment.
then edit the keymap.c
you will see this...
#define KEYMAP( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
K40, K41, K42, K45, K4A, K4B, K4C, K4D \
) { \
{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D }, \
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D }, \
{ KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D } \
}
add the keymap definition's to this area.
then
edit keymap_plain.h to match your key mappings/layout.
and do not forget to change the pinout assignment in led.c to either your pins for your led's if you have them....
void led_set(uint8_t usb_led)
{
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
// output low
DDRB |= (1<<2);
PORTB &= ~(1<<2);
} else {
// Hi-Z
DDRB &= ~(1<<2);
PORTB &= ~(1<<2);
}
}