Author Topic: [GB] TGR-Alice - 100% Completed  (Read 237224 times)

0 Members and 1 Guest are viewing this topic.

Offline gabbbe

  • Posts: 86
  • Location: Brooklyn, NY
Re: [GB] TGR-Alice - 100% Completed
« Reply #900 on: Mon, 28 January 2019, 21:42:01 »
Built!

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11723
  • Location: E NLTSR
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] TGR-Alice - 100% Completed
« Reply #901 on: Tue, 29 January 2019, 02:01:25 »
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Mira SE (reunited!) | Revo One | z | Keycult No. 1

if you're actually reading other people's posts on geekhack in 2020 you're doing something wrong

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos | "Is Linkshine our Nixon?" -NAV (fk u) | "Puddsy is the puddsy of keebs" -ns90

Offline gabbbe

  • Posts: 86
  • Location: Brooklyn, NY
Re: [GB] TGR-Alice - 100% Completed
« Reply #902 on: Tue, 29 January 2019, 09:13:10 »
Built!

that's that ****
this board brings the sunshine to a rainy afternoon.

Offline murimurimuri

  • Posts: 1
Re: [GB] TGR-Alice - 100% Completed
« Reply #903 on: Sun, 10 February 2019, 23:43:16 »
Looking to buy one if anyone is interested in selling theirs for whatever reason slide into my DMs

Offline clik_clak

  • Posts: 352
  • Location: SLC, UT
Re: [GB] TGR-Alice - 100% Completed
« Reply #904 on: Sun, 10 February 2019, 23:54:53 »
Looking to buy one if anyone is interested in selling theirs for whatever reason slide into my DMs

You and everyone else.

Offline dilkROM

  • Posts: 37
  • Location: Berlin, Germany
Re: [GB] TGR-Alice - 100% Completed
« Reply #905 on: Fri, 15 February 2019, 12:05:54 »
Looking to buy one if anyone is interested in selling theirs for whatever reason slide into my DMs

You and everyone else.

Exactly. Been seeing these a bit but didn't dig into them much yet and now starting to really like 'em. Wish I had been awares during the GB!

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8931
  • Location: The Windy City
Re: [GB] TGR-Alice - 100% Completed
« Reply #906 on: Fri, 15 February 2019, 12:08:12 »
lol Newbs.

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11723
  • Location: E NLTSR
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] TGR-Alice - 100% Completed
« Reply #907 on: Fri, 15 February 2019, 13:04:31 »
Looking to buy one if anyone is interested in selling theirs for whatever reason slide into my DMs

You and everyone else.

Exactly. Been seeing these a bit but didn't dig into them much yet and now starting to really like 'em. Wish I had been awares during the GB!

post on mechmarket and pray, like everyone else who missed the GB
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Mira SE (reunited!) | Revo One | z | Keycult No. 1

if you're actually reading other people's posts on geekhack in 2020 you're doing something wrong

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos | "Is Linkshine our Nixon?" -NAV (fk u) | "Puddsy is the puddsy of keebs" -ns90

Offline aeryxz

  • Posts: 173
    • aeboards
Re: [GB] TGR-Alice - 100% Completed
« Reply #908 on: Tue, 19 February 2019, 02:47:54 »
Last calls for Alice Wooden rest R3. This is hopefully the last alice rest gb (well I said that last time so...)

I'll be sending invoices out soon. If you did not fill the form out, PM ME ASAP, as I will be sending the order out in the next couple of days.

Alice is my favourite board and my daily, and hope that the wrist rest brings it up that extra level. Here are some pics from r1: https://www.instagram.com/p/Bl4lDyVjJva/

Here's a quote from blacksimon: "I don't even use wrist rests, yet my Alice rest gets used on the regular now, it's such a treat to use. Also burritos"


Offline futurecrime

  • Posts: 968
  • Location: London, England
  • Get Zooted
Re: [GB] TGR-Alice - 100% Completed
« Reply #909 on: Thu, 21 February 2019, 15:32:14 »
Can anyone advise on how to set indicator leds in bootmapper? I've tried setting them to on and various other settings and I just can't get any to light up. I tested them all before soldering and I know they work. Pretty sure I soldered them in the correct way around... I'd like to set one to indicate when I'm toggled to my fn3 layer. And I'd like the capslock led to toggle as well. I've never bothered with indicator leds before so this is wild new territory for me.

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11723
  • Location: E NLTSR
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] TGR-Alice - 100% Completed
« Reply #910 on: Thu, 21 February 2019, 16:58:25 »
Can anyone advise on how to set indicator leds in bootmapper? I've tried setting them to on and various other settings and I just can't get any to light up. I tested them all before soldering and I know they work. Pretty sure I soldered them in the correct way around... I'd like to set one to indicate when I'm toggled to my fn3 layer. And I'd like the capslock led to toggle as well. I've never bothered with indicator leds before so this is wild new territory for me.

i'm not sure you can set them to work with fn layers

mine just worked with the other locks straight out of the box, set to toggle

lemme take a look
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Mira SE (reunited!) | Revo One | z | Keycult No. 1

if you're actually reading other people's posts on geekhack in 2020 you're doing something wrong

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos | "Is Linkshine our Nixon?" -NAV (fk u) | "Puddsy is the puddsy of keebs" -ns90

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11723
  • Location: E NLTSR
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] TGR-Alice - 100% Completed
« Reply #911 on: Thu, 21 February 2019, 17:00:43 »
found it super fast actually



it's under options ->lock LED settings, you should be able to do what you want there

you have to make sure the board is connected (as in click the connect button) to activate this menu

can't just download your hex and go

if it doesn't work i can take another look
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Mira SE (reunited!) | Revo One | z | Keycult No. 1

if you're actually reading other people's posts on geekhack in 2020 you're doing something wrong

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos | "Is Linkshine our Nixon?" -NAV (fk u) | "Puddsy is the puddsy of keebs" -ns90

Offline nulltorious

  • Posts: 88
  • Location: Bangkok
Re: [GB] TGR-Alice - 100% Completed
« Reply #912 on: Thu, 21 February 2019, 20:22:49 »
Edited.

Just to check the LED Long Leg go to the SQUARE of the Alice PCB. I soldered mine backwards the first time around.
« Last Edit: Fri, 22 February 2019, 06:14:40 by nulltorious »

Online yuktsi

  • * Maker
  • Thread Starter
  • Posts: 1163
  • Location: Malaysia
  • Colour my life with the chaos of trouble
Re: [GB] TGR-Alice - 100% Completed
« Reply #913 on: Thu, 21 February 2019, 23:47:44 »
Just to check the LED Long Leg go to the outside of the Alice PCB. I soldered mine backwards the first time around.
The longer leg goes the "square" hole.
email: yuktsi@ttggrr.cc

My collection

More
Poker 2 | LZ CE | Leopold FC700R | KMAC 1.2 | EXE | GON NS87 | GON Nerd TKL | Duck Poker | Duck Orion | Realforce 87u 55g | OTD 456GT | LZ B7 | OTD 360C | Ducky G2 Pro | Apple Extended | Apple M0116 | Apple M0116 | Cherry G80-1220HAD | Duck Octagon | HHKB Pro 2 | Duck Unicorn | LZ B8 | LZ RE | ENVKX | OTD 456GT | LZ FE | HHKB Type S | TX1800| Duck Orion V2 | LZ FE | KPad | KMAC Happy | ENVKX | LZ RV | KMAC 2 | Whale | Dolphin | EM7 | TGR Jane | VE.A | DK Saver | Matrix 10xv1.0 | Whale | HHKB BT | Dolphin v2 | EM7 v2 | SSK | SSK (Blue Label) | LZ SQ | Duck Octagon v2 | TX84 | GON Mobik | TX-CP | LZ Ergo2 | KMAC Happy HHKB | TGR 910 | TGR Tris | Matrix 8xv1.2 | KMAC Mini | Mira | Fjell | 356mini | Dolphin GH | EM7 GH | TARO EXENT | Masterkey Pro L Crysta l OTD Koala | Duck Viper | Keycult no.1 | 356mini | 356pad | Matrix 8xv2.0 | 420cl | Matrix 8xv1.0 | Whale Special | Poly Dolphin | Keycult No.2 | FMJ80 | Singa R2 | Whale Poly | 356cl | HBCP | Dolinger | Linger | FMJ80 | KFE

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11723
  • Location: E NLTSR
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] TGR-Alice - 100% Completed
« Reply #914 on: Thu, 21 February 2019, 23:49:20 »
Just to check the LED Long Leg go to the outside of the Alice PCB. I soldered mine backwards the first time around.
The longer leg goes the "square" hole.

square hole is always +

long leg is also +
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Mira SE (reunited!) | Revo One | z | Keycult No. 1

if you're actually reading other people's posts on geekhack in 2020 you're doing something wrong

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos | "Is Linkshine our Nixon?" -NAV (fk u) | "Puddsy is the puddsy of keebs" -ns90

Offline nulltorious

  • Posts: 88
  • Location: Bangkok
Re: [GB] TGR-Alice - 100% Completed
« Reply #915 on: Fri, 22 February 2019, 04:40:30 »
Quote
The longer leg goes the "square" hole.

My mistake, you guys are correct. LED Long leg with square hole.

Offline futurecrime

  • Posts: 968
  • Location: London, England
  • Get Zooted
Re: [GB] TGR-Alice - 100% Completed
« Reply #916 on: Wed, 27 February 2019, 17:16:18 »
found it super fast actually

Show Image


it's under options ->lock LED settings, you should be able to do what you want there

you have to make sure the board is connected (as in click the connect button) to activate this menu

can't just download your hex and go

if it doesn't work i can take another look

Oh cheers, didn't see these replies til now for some reason. Yeah I tried a bunch of settings in that menu but to no avail. I guess it's possible I soldered the led the wrong way around. I'll check it when my PC plate arrives and I do a second build.

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11723
  • Location: E NLTSR
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] TGR-Alice - 100% Completed
« Reply #917 on: Wed, 27 February 2019, 18:07:45 »
found it super fast actually

Show Image


it's under options ->lock LED settings, you should be able to do what you want there

you have to make sure the board is connected (as in click the connect button) to activate this menu

can't just download your hex and go

if it doesn't work i can take another look

Oh cheers, didn't see these replies til now for some reason. Yeah I tried a bunch of settings in that menu but to no avail. I guess it's possible I soldered the led the wrong way around. I'll check it when my PC plate arrives and I do a second build.

if you plug the PCB in and touch the LED to the pads, they'll light up if you have em the right way round (and they are enabled in the software)

long leg square hole
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Mira SE (reunited!) | Revo One | z | Keycult No. 1

if you're actually reading other people's posts on geekhack in 2020 you're doing something wrong

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos | "Is Linkshine our Nixon?" -NAV (fk u) | "Puddsy is the puddsy of keebs" -ns90

Offline dantambok

  • Posts: 907
  • Location: Philippines
Re: [GB] TGR-Alice - 100% Completed
« Reply #918 on: Tue, 12 March 2019, 20:29:01 »
Just infilled the engravings. Pretty happy with how they look  ;D

215044-0
215046-1
Stuff  I have
More
2x TGR Alice / TGR 910 RE / TGR 910 CE / TGR 910 VKC / 2x TGR Jane V2 / 2x Matrix 2.0 / Matrix 2.2 / Matrix 1.2OG / Lyn Whale v2 / Lyn EM7 v3 / DK Saver / 2x Keycult No. 1/60 / Hachi / Kyuu / Duck Orion V2 / 2x TGRxSinga Unikorn / Unikorn 2.1 / QXP / TX1800 V1 /  JER80 / TMO50 / 2x 86u / ION i69 / LZ MP / 2x FMJ80 / TGR Jane V2 CE / Matrix Project F / IDB60 / is0  / MXSS / Atom TKL / Duck Viper v3 / HBCP / Noxary 280 / LZ Physix / FLX Virgo / Modern M0110 / 2x Matrix 2.0 ADD / TGR Police / Noxary XRF / Noxary Vulcan Pro / 350 Mimi / Matrix Falcon / Matrix 2.0CP / Kira80 / Exent 65%

Coming --   Lynx50/ 2x GSKT-00 /  Andromeda / Haus65 / Valhalla / Dalco Mini / Iron 165 / Dolphin 2021 / Time RE / Fuji 65 / Tomo  / AU Unikorn / FMJ60


Online LightningXI

  • * Elevated Elder
  • Posts: 3824
  • Location: New York
  • PPD
    • ArtisanMacro
Re: [GB] TGR-Alice - 100% Completed
« Reply #919 on: Tue, 12 March 2019, 20:33:15 »
Just infilled the engravings. Pretty happy with how they look  ;D

(Attachment Link)
(Attachment Link)
Nice. I like the black one with black infill

Offline ejewell89

  • Posts: 734
  • Location: Pennsylvania
  • 4ever Smol
Re: [GB] TGR-Alice - 100% Completed
« Reply #920 on: Tue, 12 March 2019, 20:36:59 »
Just infilled the engravings. Pretty happy with how they look  ;D

(Attachment Link)
(Attachment Link)

howd you do dat
              

Offline superdoedoe

  • Posts: 501
  • Location: Straya
  • ( ͡ ͜ʖ ͡)
Re: [GB] TGR-Alice - 100% Completed
« Reply #921 on: Tue, 12 March 2019, 20:52:02 »
Just infilled the engravings. Pretty happy with how they look  ;D

(Attachment Link)
(Attachment Link)

howd you do dat

With Acrylic paint

Offline audax989

  • Posts: 859
  • Location: Guam
  • NOM NOM NOM
    • Guam Mechanical Keyboards
Re: [GB] TGR-Alice - 100% Completed
« Reply #922 on: Tue, 12 March 2019, 21:21:59 »
Just infilled the engravings. Pretty happy with how they look  ;D

(Attachment Link)
(Attachment Link)

howd you do dat


Stole from Dan



Sent from my iPhone using Tapatalk

Offline dantambok

  • Posts: 907
  • Location: Philippines
Re: [GB] TGR-Alice - 100% Completed
« Reply #923 on: Tue, 12 March 2019, 22:11:20 »
I used water based acrylic paint and applied it with a rubber paint brush. Wiped the excess paint using some cardboard, let it dry then cleaned up the rest using Q tips and alcohol.

Do note that anodized aluminum is easy to clean. Sandblasted brass parts are harder to clean due to the rough texture and paint getting stuck there
Stuff  I have
More
2x TGR Alice / TGR 910 RE / TGR 910 CE / TGR 910 VKC / 2x TGR Jane V2 / 2x Matrix 2.0 / Matrix 2.2 / Matrix 1.2OG / Lyn Whale v2 / Lyn EM7 v3 / DK Saver / 2x Keycult No. 1/60 / Hachi / Kyuu / Duck Orion V2 / 2x TGRxSinga Unikorn / Unikorn 2.1 / QXP / TX1800 V1 /  JER80 / TMO50 / 2x 86u / ION i69 / LZ MP / 2x FMJ80 / TGR Jane V2 CE / Matrix Project F / IDB60 / is0  / MXSS / Atom TKL / Duck Viper v3 / HBCP / Noxary 280 / LZ Physix / FLX Virgo / Modern M0110 / 2x Matrix 2.0 ADD / TGR Police / Noxary XRF / Noxary Vulcan Pro / 350 Mimi / Matrix Falcon / Matrix 2.0CP / Kira80 / Exent 65%

Coming --   Lynx50/ 2x GSKT-00 /  Andromeda / Haus65 / Valhalla / Dalco Mini / Iron 165 / Dolphin 2021 / Time RE / Fuji 65 / Tomo  / AU Unikorn / FMJ60


Online LightningXI

  • * Elevated Elder
  • Posts: 3824
  • Location: New York
  • PPD
    • ArtisanMacro
Re: [GB] TGR-Alice - 100% Completed
« Reply #924 on: Tue, 12 March 2019, 22:49:30 »
I used water based acrylic paint and applied it with a rubber paint brush. Wiped the excess paint using some cardboard, let it dry then cleaned up the rest using Q tips and alcohol.

Do note that anodized aluminum is easy to clean. Sandblasted brass parts are harder to clean due to the rough texture and paint getting stuck there

When you say "harder to clean", they are still cleanable with enough rubbing alcohol/q-tip right?

Offline dantambok

  • Posts: 907
  • Location: Philippines
Re: [GB] TGR-Alice - 100% Completed
« Reply #925 on: Tue, 12 March 2019, 23:01:05 »
Yes still cleanable with more rubbing needed. On anodized aluminum, it just slides off. The alice weights were smoother vs the 910 weights that i have. Had a hard time cleaning up the weight on the poly (check the 910 logo, a bit of discoloration on the edges from all the rubbing off q tips and alcohol)

215056-0

Rip q tips

215058-1
Stuff  I have
More
2x TGR Alice / TGR 910 RE / TGR 910 CE / TGR 910 VKC / 2x TGR Jane V2 / 2x Matrix 2.0 / Matrix 2.2 / Matrix 1.2OG / Lyn Whale v2 / Lyn EM7 v3 / DK Saver / 2x Keycult No. 1/60 / Hachi / Kyuu / Duck Orion V2 / 2x TGRxSinga Unikorn / Unikorn 2.1 / QXP / TX1800 V1 /  JER80 / TMO50 / 2x 86u / ION i69 / LZ MP / 2x FMJ80 / TGR Jane V2 CE / Matrix Project F / IDB60 / is0  / MXSS / Atom TKL / Duck Viper v3 / HBCP / Noxary 280 / LZ Physix / FLX Virgo / Modern M0110 / 2x Matrix 2.0 ADD / TGR Police / Noxary XRF / Noxary Vulcan Pro / 350 Mimi / Matrix Falcon / Matrix 2.0CP / Kira80 / Exent 65%

Coming --   Lynx50/ 2x GSKT-00 /  Andromeda / Haus65 / Valhalla / Dalco Mini / Iron 165 / Dolphin 2021 / Time RE / Fuji 65 / Tomo  / AU Unikorn / FMJ60


Online LightningXI

  • * Elevated Elder
  • Posts: 3824
  • Location: New York
  • PPD
    • ArtisanMacro
Re: [GB] TGR-Alice - 100% Completed
« Reply #926 on: Tue, 12 March 2019, 23:02:59 »
Yes still cleanable with more rubbing needed. On anodized aluminum, it just slides off. The alice weights were smoother vs the 910 weights that i have. Had a hard time cleaning up the weight on the poly (check the 910 logo, a bit of discoloration on the edges from all the rubbing off q tips and alcohol)

(Attachment Link)

Rip q tips

(Attachment Link)

Interesting. Thanks for the details. At least it worked, and frankly, the said discoloration isn't even that bad.

Offline dantambok

  • Posts: 907
  • Location: Philippines
Re: [GB] TGR-Alice - 100% Completed
« Reply #927 on: Tue, 12 March 2019, 23:06:15 »
Its more visible on a different angle though. Also, idk how all the rubbing with alchohol affected the coating on the sandblasted brass parts.

I do know for sure that alcohol and acetone will have no effects on anodizing at all
Stuff  I have
More
2x TGR Alice / TGR 910 RE / TGR 910 CE / TGR 910 VKC / 2x TGR Jane V2 / 2x Matrix 2.0 / Matrix 2.2 / Matrix 1.2OG / Lyn Whale v2 / Lyn EM7 v3 / DK Saver / 2x Keycult No. 1/60 / Hachi / Kyuu / Duck Orion V2 / 2x TGRxSinga Unikorn / Unikorn 2.1 / QXP / TX1800 V1 /  JER80 / TMO50 / 2x 86u / ION i69 / LZ MP / 2x FMJ80 / TGR Jane V2 CE / Matrix Project F / IDB60 / is0  / MXSS / Atom TKL / Duck Viper v3 / HBCP / Noxary 280 / LZ Physix / FLX Virgo / Modern M0110 / 2x Matrix 2.0 ADD / TGR Police / Noxary XRF / Noxary Vulcan Pro / 350 Mimi / Matrix Falcon / Matrix 2.0CP / Kira80 / Exent 65%

Coming --   Lynx50/ 2x GSKT-00 /  Andromeda / Haus65 / Valhalla / Dalco Mini / Iron 165 / Dolphin 2021 / Time RE / Fuji 65 / Tomo  / AU Unikorn / FMJ60


Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11723
  • Location: E NLTSR
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] TGR-Alice - 100% Completed
« Reply #928 on: Wed, 13 March 2019, 01:41:37 »
i wanna do my alice weight but idk what color id do

might do it to match the cerakote i wanna do on my alice
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Mira SE (reunited!) | Revo One | z | Keycult No. 1

if you're actually reading other people's posts on geekhack in 2020 you're doing something wrong

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos | "Is Linkshine our Nixon?" -NAV (fk u) | "Puddsy is the puddsy of keebs" -ns90

Online LightningXI

  • * Elevated Elder
  • Posts: 3824
  • Location: New York
  • PPD
    • ArtisanMacro
Re: [GB] TGR-Alice - 100% Completed
« Reply #929 on: Wed, 13 March 2019, 03:31:30 »
Its more visible on a different angle though. Also, idk how all the rubbing with alchohol affected the coating on the sandblasted brass parts.

I do know for sure that alcohol and acetone will have no effects on anodizing at all
Thanks for the insight. I think a solution might just be to try using a finer brush in applying on brass so as to minimize the amount of cleanup required.

Looks great on your boards!

Offline ejewell89

  • Posts: 734
  • Location: Pennsylvania
  • 4ever Smol
Re: [GB] TGR-Alice - 100% Completed
« Reply #930 on: Wed, 13 March 2019, 08:22:04 »
Yes still cleanable with more rubbing needed. On anodized aluminum, it just slides off. The alice weights were smoother vs the 910 weights that i have. Had a hard time cleaning up the weight on the poly (check the 910 logo, a bit of discoloration on the edges from all the rubbing off q tips and alcohol)

(Attachment Link)

Rip q tips

(Attachment Link)

glad i'm not the only one with two alice's and two 910's. lol
              

Offline Dawn

  • Posts: 3
Re: [GB] TGR-Alice - 75% Completed
« Reply #931 on: Sat, 16 March 2019, 23:14:24 »
Hey guys, here are the files.

PCB layout file https://www.dropbox.com/s/71r8ra5ft25uiqa/alice_PCB_layout.DWG?dl=0
Plate https://www.dropbox.com/s/35dhihpsjpnb2nx/alice_plate_rev_C.DWG?dl=0
Acrylic case https://www.dropbox.com/s/kq2i2yhk1mshpuv/alice_case_acrylic.DWG?dl=0

Thanks.

Any chance anyone has some STL files so I can try 3d printing the case? (Borrowing a friend's 3D printer... don't have any clue about file formats... I'm a SWE... not an engineer that 3d prints by any means).

Offline Darknight00z

  • Posts: 641
  • Location: UK
Re: [GB] TGR-Alice - 100% Completed
« Reply #932 on: Sun, 07 April 2019, 07:54:33 »
Any weight on the rumors of Alice v2 in late 2019?

Offline zekkin

  • Posts: 486
  • Location: New York
  • my entire life was unlimited zekk works
Re: [GB] TGR-Alice - 100% Completed
« Reply #933 on: Sun, 07 April 2019, 08:46:36 »
Any weight on the rumors of Alice v2 in late 2019?

the only person who can provide any sort of information of value regarding this would be yuktsi

(and not someone else who seems to always pop up in every group buy thread asserting knowledge regardless of them being in the group buy or not)
Daily Driver: TGR-Jane v2 CE
TGR-Alice | TGR-Jane v2 | Rosenthal | Matrix Lab 8xv2.0 | Ogre (PC) | Yves | KFE | hbcp | Vulcan

Offline dantambok

  • Posts: 907
  • Location: Philippines
Re: [GB] TGR-Alice - 100% Completed
« Reply #934 on: Sun, 07 April 2019, 08:51:27 »
216772-0


thonk
Stuff  I have
More
2x TGR Alice / TGR 910 RE / TGR 910 CE / TGR 910 VKC / 2x TGR Jane V2 / 2x Matrix 2.0 / Matrix 2.2 / Matrix 1.2OG / Lyn Whale v2 / Lyn EM7 v3 / DK Saver / 2x Keycult No. 1/60 / Hachi / Kyuu / Duck Orion V2 / 2x TGRxSinga Unikorn / Unikorn 2.1 / QXP / TX1800 V1 /  JER80 / TMO50 / 2x 86u / ION i69 / LZ MP / 2x FMJ80 / TGR Jane V2 CE / Matrix Project F / IDB60 / is0  / MXSS / Atom TKL / Duck Viper v3 / HBCP / Noxary 280 / LZ Physix / FLX Virgo / Modern M0110 / 2x Matrix 2.0 ADD / TGR Police / Noxary XRF / Noxary Vulcan Pro / 350 Mimi / Matrix Falcon / Matrix 2.0CP / Kira80 / Exent 65%

Coming --   Lynx50/ 2x GSKT-00 /  Andromeda / Haus65 / Valhalla / Dalco Mini / Iron 165 / Dolphin 2021 / Time RE / Fuji 65 / Tomo  / AU Unikorn / FMJ60


Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11723
  • Location: E NLTSR
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] TGR-Alice - 100% Completed
« Reply #935 on: Sun, 07 April 2019, 12:23:37 »
Any weight on the rumors of Alice v2 in late 2019?

Highly doubtful
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Mira SE (reunited!) | Revo One | z | Keycult No. 1

if you're actually reading other people's posts on geekhack in 2020 you're doing something wrong

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos | "Is Linkshine our Nixon?" -NAV (fk u) | "Puddsy is the puddsy of keebs" -ns90

Offline vegs

  • Posts: 625
Re: [GB] TGR-Alice - 100% Completed
« Reply #936 on: Sun, 07 April 2019, 13:01:08 »
Any weight on the rumors of Alice v2 in late 2019?

the only person who can provide any sort of information of value regarding this would be yuktsi

(and not someone else who seems to always pop up in every group buy thread asserting knowledge regardless of them being in the group buy or not)

Any weight on the rumors of Alice v2 in late 2019?
Highly doubtful

 :))
buy less

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11723
  • Location: E NLTSR
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] TGR-Alice - 100% Completed
« Reply #937 on: Sun, 07 April 2019, 13:45:55 »
Any weight on the rumors of Alice v2 in late 2019?

the only person who can provide any sort of information of value regarding this would be yuktsi

(and not someone else who seems to always pop up in every group buy thread asserting knowledge regardless of them being in the group buy or not)

Any weight on the rumors of Alice v2 in late 2019?
Highly doubtful

 :))

i'm basing that off the fact that sam has said nearly everywhere he doesn't want to do one

then again i got screwed on the same basis for orion v3 soooo
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Mira SE (reunited!) | Revo One | z | Keycult No. 1

if you're actually reading other people's posts on geekhack in 2020 you're doing something wrong

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos | "Is Linkshine our Nixon?" -NAV (fk u) | "Puddsy is the puddsy of keebs" -ns90

Offline ejewell89

  • Posts: 734
  • Location: Pennsylvania
  • 4ever Smol
Re: [GB] TGR-Alice - 100% Completed
« Reply #938 on: Mon, 08 April 2019, 09:13:37 »
Any weight on the rumors of Alice v2 in late 2019?

the only person who can provide any sort of information of value regarding this would be yuktsi

(and not someone else who seems to always pop up in every group buy thread asserting knowledge regardless of them being in the group buy or not)

Any weight on the rumors of Alice v2 in late 2019?
Highly doubtful

 :))

i'm basing that off the fact that sam has said nearly everywhere he doesn't want to do one

then again i got screwed on the same basis for orion v3 soooo

grasps his alice tighter
              

Offline fishinaspacesuit

  • Posts: 96
  • Location: Singapore
Re: [GB] TGR-Alice - 100% Completed
« Reply #939 on: Mon, 15 April 2019, 04:43:51 »
Finished putting this together last week  :-*


Offline strigif0rm3s

  • Posts: 128
Re: [GB] TGR-Alice - 100% Completed
« Reply #940 on: Thu, 06 June 2019, 12:43:17 »
Seriously, please announce round 2!!! I want so bad

Sent from my Nexus 6P using Tapatalk


Offline superdoedoe

  • Posts: 501
  • Location: Straya
  • ( ͡ ͜ʖ ͡)
Re: [GB] TGR-Alice - 100% Completed
« Reply #941 on: Fri, 07 June 2019, 18:49:29 »
Seriously, please announce round 2!!! I want so bad

Sent from my Nexus 6P using Tapatalk

He's said a few times the Alice GB wasn't great for him, so the chances of him running another any time soon are slim. His schedule also looks pretty full for the next year already(Jane 2 ce, Zooey & potentially another board).

Offline SBN

  • Posts: 134
Re: [GB] TGR-Alice - 100% Completed
« Reply #942 on: Sat, 08 June 2019, 02:04:17 »
Seriously, please announce round 2!!! I want so bad

Sent from my Nexus 6P using Tapatalk

He's said a few times the Alice GB wasn't great for him, so the chances of him running another any time soon are slim. His schedule also looks pretty full for the next year already(Jane 2 ce, Zooey & potentially another board).

Did he say that Zooey is next?

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11723
  • Location: E NLTSR
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] TGR-Alice - 100% Completed
« Reply #943 on: Sat, 15 June 2019, 20:19:21 »
Seriously, please announce round 2!!! I want so bad

Sent from my Nexus 6P using Tapatalk

He's said a few times the Alice GB wasn't great for him, so the chances of him running another any time soon are slim. His schedule also looks pretty full for the next year already(Jane 2 ce, Zooey & potentially another board).

Did he say that Zooey is next?

if he did i didn't see it
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Mira SE (reunited!) | Revo One | z | Keycult No. 1

if you're actually reading other people's posts on geekhack in 2020 you're doing something wrong

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos | "Is Linkshine our Nixon?" -NAV (fk u) | "Puddsy is the puddsy of keebs" -ns90

Offline Solotov

  • Posts: 366
Re: [GB] TGR-Alice - 100% Completed
« Reply #944 on: Fri, 04 October 2019, 02:02:28 »
I had a great dream last night. There was TGR Alice round 2.  :-[
Flex is love, flex is life.

Offline funderburker

  • * Exquisite Elder
  • Posts: 1326
  • Location: Latvia, Riga
Re: [GB] TGR-Alice - 100% Completed
« Reply #945 on: Fri, 04 October 2019, 02:43:54 »
I had a great dream last night. There was TGR Alice round 2.  :-[

Resurrecting old GB threads is the best. :D

But I gotta say - given how many Alice like projects are there right now with Yuktsi approval, I don't think there's a need for a legit TGR Alice re-run. There's Lubrigante, Rukia, Nunu, Austere and a couple of more for sure, not even counting Majapahit and other TKL layouts. A lot of them even share the same PCB and plate compatability.
My boards: TMO50 FE:06 | LAGOM Groda-T | TMOv2 R1 prototype | Onyx prototype | Stege TKL prototype

Offline yuppie

  • Posts: 354
Re: [GB] TGR-Alice - 100% Completed
« Reply #946 on: Sun, 29 December 2019, 20:39:39 »
If anyone has an extra PCB, Plate or LED kit they'd like to sell, please contact me  :cool:
"Overall, it's a good community..  wish you well on your Pokemon Journey.." - TP4


Current Trades -- Wishlist

Offline Aznguyen316

  • Posts: 159
  • Location: US-FL
Re: [GB] TGR-Alice - 100% Completed
« Reply #947 on: Sat, 11 April 2020, 22:05:00 »
nevermind.
« Last Edit: Sun, 12 April 2020, 19:08:39 by Aznguyen316 »

Offline Crazy Designers

  • Posts: 129
Re: [GB] TGR-Alice - 100% Completed
« Reply #948 on: Tue, 14 April 2020, 01:48:21 »
it looks so nice :D :D

Offline delet_d

  • Posts: 76
  • Location: Silicon Valley
Re: [GB] TGR-Alice - 100% Completed
« Reply #949 on: Tue, 14 April 2020, 13:45:52 »
Nothing can beat the original weight and engraving though...  Still waiting.