Author Topic: [Tai-Hao] New Double Shot Molding Keycaps in PBT  (Read 73615 times)

0 Members and 1 Guest are viewing this topic.

Offline sdiearly

  • Thread Starter
  • Posts: 178
  • Location: Taiwan
[Tai-Hao] New Double Shot Molding Keycaps in PBT
« on: Thu, 18 December 2014, 19:53:28 »
Update Add-on Keys:


Here I choose two of Datacomp's Keyboard to try Big Shaped-L Enter

For Datacomp, The long stem of Enter Key will go down and pass through PCB.

1. Zowie Celeritas /w Miami



2. SteelSeries 7G /w Red&Black



Update my received order:


I am lazy to try all of colors, choose black/yellow to take pictures.
Installed with KBP v60



Compare to other 60%


Update full set pictures,
notice: add-on keys are depend on demand, not standard products.

Key caps box:


Key caps frame:



1. Yellow/Black


2. Orange/Black


3. Red/Black


4. Miami


Hi Geekers,

Tai-Hao is developing many new products recently.
I just received these samples last night, They provide me FOUR solutions in Bi-Color sets.



1. Red/Black


2. Yellow/Black


3. Orange/Black


4. Likely Miami


Current information:
*. OEM profile
*. Thin molding


I will take pictures later to compare with below PBT keycaps I have on my hand and update in this OP :)
1. Vortex thin
2. Vortex thick
3. Keycool
4. Leopold
5. Noppoo
6. Cherry
7. SP


MOD EDIT: Fixed image links.
« Last Edit: Mon, 16 March 2015, 00:50:19 by sdiearly »
My favorite 60%:  TEX-Beetle
                 80%:  KBtalKing Race
                100%: Cherry G80-3494, Zowie Celeritas

Offline FrostyToast

  • Litshoard
  • * Exquisite Elder
  • Posts: 2368
  • Location: Canada
Re: [Tai-Hao] New Double Shot Molding Keycaps with PBT
« Reply #1 on: Thu, 18 December 2014, 19:56:28 »
Interesting. They're not thick, but they might be fine even for a board I care about.
Quote from: elton5354
I don't need anymore keyboards

Offline hwood34

  • underwater squad
  • * Exalted Elder
  • Posts: 5917
  • Location: USA
  • #1 CL stan
    • Keyboard Illuminati
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #2 on: Thu, 18 December 2014, 20:46:36 »
Hmm, seem decent, especially for how cheap they'll likely be
IV KWK Info Thread & KBK Info Thread IV (out of date)

Old GBs: Gateron Switches (2015) | CF-LX R1 (2015) | CF-LX R2 (2017) | CF-LXXX (2017) | Gen.s Gem Caps (2015)

"Under no pretext should arms and ammunition be surrendered; any attempt to disarm the workers must be frustrated, by force if necessary"

Offline strafe

  • Posts: 241
  • Location: Australia
    • Strafe's Blog
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #3 on: Thu, 18 December 2014, 21:17:32 »
Hopefully I can buy a complete orange/black and black/orange set if these become available in a group buy.
Freebird WKL (Blacks Clear-Tops), iKBC F-104 (Blacks) and more!

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 21175
  • Location: melbourne.vic.au
  • Missed another sale.
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #4 on: Thu, 18 December 2014, 23:22:13 »
Tai Hao are generally reasonable keycaps, especially for the money.  Remember that they have been producing keycaps for a long time, so they've pretty much works out all the kinks.

The legends are also very consistent, which does greatly improve the look of a keycap set.

The price of these will be interesting.  Hopefully it will be in a similar range to the existing ABS sets.
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But that’s incorrect. It’s in HHKB’s slogan, but when America’s cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Offline CommonCurt

  • One of the cool kids
  • * Esteemed Elder
  • Posts: 4643
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #5 on: Thu, 18 December 2014, 23:28:37 »
Color me interested.
Some of Ye ole  Keyboards -->
More
OTD Koala:  62g Old MX-Blacks   |   LZ-GH V2:  MX-?62g   |   KMAC2:   62g Tactile MX-Greys   |   LZ CLS s:   62g Vintage MX-Blacks   |   X60:   62g Vintage MX-Blacks   |   GON NerD 60:  62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  62g MX-Clears  &   62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS/WTT ---->
More

Offline MGH

  • Posts: 310
  • Lost in translation with a whole ****in' nation
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #6 on: Thu, 18 December 2014, 23:38:41 »
I'd be in for a PBT Miami :p

Offline tbc

  • Posts: 2365
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #7 on: Thu, 18 December 2014, 23:59:52 »
how to they compare to dsa in terms of thickness?

do the sides have the same texture as the top?
ALL zombros wanted:  dead or undead or dead-dead.

Offline nubbinator

  • Dabbler Supreme
  • * Maker
  • Posts: 8658
  • Location: Orange County, CA
  • Model M "connoisseur"
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #8 on: Fri, 19 December 2014, 00:13:27 »
Any reason you're doing Toxic Lite, Nostalgia, and Miami instead of something original?  Don't get me wrong, I love affordable Tai Hao sets, but we should strive to be doing something original instead of a remake of someone's sets. 

Offline quake4mhg

  • Posts: 492
  • Location: BC, Canada
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #9 on: Fri, 19 December 2014, 00:47:50 »
Oh god, Looks great! I have to work harder  :D

Offline Lu_e

  • Posts: 647
  • Location: NWUSA
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #10 on: Fri, 19 December 2014, 01:31:51 »
I'd be in for a PBT Miami :p

I may also 8-]

Offline Heliosphere

  • Posts: 405
  • Location: San Jose, CA
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #11 on: Fri, 19 December 2014, 01:43:13 »
Sweet bajesus, double-shot PBTs.

Offline Liar

  • Posts: 56
  • Location: Maryland, US
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #12 on: Fri, 19 December 2014, 02:46:11 »
I am definitely in for the Miami set, it looks fantastic

Offline Saviant

  • Posts: 124
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #13 on: Fri, 19 December 2014, 03:25:56 »
I am liking the Orange / black would be down for a couple sets

Offline tmk1207

  • Posts: 448
  • Location: Viet Nam
  • Yêu Màu Tím
    • Vietnam Mechanical Keyboard Club <3
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #14 on: Fri, 19 December 2014, 06:21:09 »
Wow. Look greats ;)

Offline MOZ

  • KING OF THE NEWBIES
  • * Maker
  • Posts: 3981
  • Location: Jo'burg
  • Busy making stuff
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #15 on: Fri, 19 December 2014, 06:48:24 »
Interesting looks stuff. I'm not too bothered about material to be honest, I do like them to be thick though and not a found of OEM profile, perhaps in the future Tai Hao would look to have a Cherry/DCS profile or SA/tall profile, which I don't think would be happening soon or ever.

Offline frostylove

  • Posts: 245
  • Location: CHINA
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #16 on: Fri, 19 December 2014, 11:10:38 »
PBT douleshot with Cherry profile would be fantastic, and IMO they would be better keycaps than SP ones. You can expect that Tai-hao will finally add novlties to their product. I don't care about whether it is wyse or Helvetica on my keybds, I only care whether it is cherry font or not. 
Suhr Custom Standard Carve Top
Manson DL-1 Matt Bellamy Signature
Marshall JVM410H + 1960A
Lovepedal Kanji Enternity

Offline Jixr

  • Posts: 864
  • Location: Austin Tx
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #17 on: Fri, 19 December 2014, 11:22:39 »
awesome, I'm totally down with them cloning some of the popular sets.
If the miami comes out, I'd deff buy.

Spending $100 for a abs set, no thanks, but if I can get a copy set for $20-30, I'm in.

I'm still waiting on my ollivette set from one of the GB's on here though. Should be in early next year.
« Last Edit: Fri, 19 December 2014, 11:26:18 by Jixr »

Offline margo baggins

  • Dungeon Dweller
  • * Maker
  • Posts: 305
  • Location: Brighton - United Kingdom
  • Get back to work!
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #18 on: Fri, 19 December 2014, 11:59:46 »
Any reason you're doing Toxic Lite, Nostalgia, and Miami instead of something original?  Don't get me wrong, I love affordable Tai Hao sets, but we should strive to be doing something original instead of a remake of someone's sets.

As ever nubbs has got it bang on.
I got boards.



Offline P3TC0CK

  • Posts: 140
  • Location: Dubai, UAE
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #19 on: Fri, 19 December 2014, 13:59:30 »
Any reason you're doing Toxic Lite, Nostalgia, and Miami instead of something original?  Don't get me wrong, I love affordable Tai Hao sets, but we should strive to be doing something original instead of a remake of someone's sets.

As ever nubbs has got it bang on.

If you've ever looked at how a lot of these Asian companies produce products (especially Chinese companies) you'll notice that they start out making clones, copies, or budget versions of existing products then slowly branch out.

If you can release something that is successful in the broader market, then you can start developing your own niche products. The example sets are pretty niche outside of the enthusiast market (I love my miami key cap set, but there isn't a huge demand for them outside of GH, Reddit, etc) so making an entirely new set would require a lot of advertising/convincing on their part which they probably don't want to do.
petcock
[pet-kok] 
noun
1. a small valve or faucet, as for draining off excess or waste material from the cylinder of a steam engine or an internal-combustion engine.

Offline nubbinator

  • Dabbler Supreme
  • * Maker
  • Posts: 8658
  • Location: Orange County, CA
  • Model M "connoisseur"
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #20 on: Fri, 19 December 2014, 14:49:06 »
Tai Hao is old and established, not new and are already large and succesful, finally breaking into the niche market with retailers like Newegg. 

Given that we have done GBs with them in colors we requested, I don't doubt that these colors were requested instead of doing novel colors.  Even if they weren't, the push should be for novel ideas and we should be working with the manufacturer to realize the concept.

I would like to see new schemes, not rehashed.

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 21175
  • Location: melbourne.vic.au
  • Missed another sale.
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #21 on: Sat, 20 December 2014, 18:44:26 »
PBT Dolch?
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But that’s incorrect. It’s in HHKB’s slogan, but when America’s cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Offline ideus

  • * Exalted Elder
  • Posts: 8123
  • Location: In the middle of nowhere.
  • Björkö.
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #22 on: Sat, 20 December 2014, 19:13:18 »
Just for confirmation: The profile is Cherry like? Because Vortex DS PBTs are OEM profile, now a full set of the Vortex is at $20 usd at Massdrop, thus these caps should be even cheaper.

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 21175
  • Location: melbourne.vic.au
  • Missed another sale.
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #23 on: Sat, 20 December 2014, 19:23:17 »
Just for confirmation: The profile is Cherry like? Because Vortex DS PBTs are OEM profile, now a full set of the Vortex is at $20 usd at Massdrop, thus these caps should be even cheaper.

OP says OEM profile.
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But that’s incorrect. It’s in HHKB’s slogan, but when America’s cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Offline cephelix

  • Posts: 143
  • Location: Singapore
  • to buy or not to buy?
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #24 on: Sat, 20 December 2014, 22:25:33 »
These look good...i'd be in for a set if the price is reasonable
ALi
Filco MJ2 TKL MX Browns | KC60 Gateron Browns

Offline berserkfan

  • Posts: 2135
  • Location: Not CONUS Not CONUS Not CONUS Not CONUS
  • changing diapers is more fun than model f assembly
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #25 on: Sun, 21 December 2014, 11:29:05 »
Another big round of applause for Tai Hao, in making value sets so inexpensively. I think in the long run competition from Tai Hao will bring down prices for everyone.
Most of the modding can be done on your own once you break through the psychological barriers.

Offline bazemk1979

  • Posts: 1625
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #26 on: Sun, 21 December 2014, 15:12:51 »
all of this sets look good
Quote from: IvanIvanovich on Wed, 08 January 2014, 18:02:50

When you bottom out dong cap... is it going balls deep?

Offline Danboard

  • Posts: 105
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #27 on: Sun, 21 December 2014, 17:09:52 »
I wonder if they'll ever come out with some cherry profile keys.

Offline ideus

  • * Exalted Elder
  • Posts: 8123
  • Location: In the middle of nowhere.
  • Björkö.
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #28 on: Sun, 21 December 2014, 18:39:24 »
I do not use an standard ANSI nor ISO layout, thus, the main drawback from these sets is there is no alternative keys, like 1.75u 3rd row control, 1.5u 2nd row back space, 1.75u right shift, and so. I suppose their low cost prevent to produce any short runs for such special keys.

Offline sdiearly

  • Thread Starter
  • Posts: 178
  • Location: Taiwan
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #29 on: Tue, 23 December 2014, 00:11:23 »
Update pictures in our forum,
http://www.ptt.cc/bbs/Key_Mou_Pad/M.1419270128.A.52F.html

I have no time to describe them in English currently.
My favorite 60%:  TEX-Beetle
                 80%:  KBtalKing Race
                100%: Cherry G80-3494, Zowie Celeritas

Offline Knxwledge

  • Posts: 20
  • Location: San Diego, CA
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #30 on: Tue, 23 December 2014, 14:46:11 »
Is there a release date yet?

Offline frostylove

  • Posts: 245
  • Location: CHINA
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #31 on: Tue, 23 December 2014, 20:54:39 »
Thanks for the picture comparison!

For those who can't read Chinese: Generally the texture of Tai-Hao caps is much smother than other caps listed above except Cherry/GMK caps.
Suhr Custom Standard Carve Top
Manson DL-1 Matt Bellamy Signature
Marshall JVM410H + 1960A
Lovepedal Kanji Enternity

Offline Data

  • Posts: 2608
  • Location: Orlando, FL
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #32 on: Tue, 23 December 2014, 21:18:31 »
Tai Hao is old and established, not new and are already large and succesful, finally breaking into the niche market with retailers like Newegg. 

Given that we have done GBs with them in colors we requested, I don't doubt that these colors were requested instead of doing novel colors.  Even if they weren't, the push should be for novel ideas and we should be working with the manufacturer to realize the concept.

I would like to see new schemes, not rehashed.

Yes, obviously.

In the meantime, why can't we just be happy for cheap PBT doubleshots?

Offline Liar

  • Posts: 56
  • Location: Maryland, US
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #33 on: Wed, 24 December 2014, 01:03:46 »
Thanks for the picture comparison!

For those who can't read Chinese: Generally the texture of Tai-Hao caps is much smother than other caps listed above except Cherry/GMK caps.

Now I am on the fence, I dislike the smooth texture of the POMs on my Noppoo  :-\

Offline Evo_Spec

  • (╯°ヮ°)╯︵⌨
  • * Destiny Supporter
  • Posts: 1023
  • Location: Japan
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #34 on: Wed, 24 December 2014, 06:51:16 »
very cool! i was actually thinking about doing something in red/black
.                 .  
GON NerD TKL DTA Edition

Offline dante

  • Posts: 2553
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #35 on: Fri, 26 December 2014, 07:46:52 »
Tai Hao is also researching backlit keycaps.  No idea if they are PBT though.

Offline nubbinator

  • Dabbler Supreme
  • * Maker
  • Posts: 8658
  • Location: Orange County, CA
  • Model M "connoisseur"
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #36 on: Fri, 26 December 2014, 08:53:31 »
Tai Hao is old and established, not new and are already large and succesful, finally breaking into the niche market with retailers like Newegg. 

Given that we have done GBs with them in colors we requested, I don't doubt that these colors were requested instead of doing novel colors.  Even if they weren't, the push should be for novel ideas and we should be working with the manufacturer to realize the concept.

I would like to see new schemes, not rehashed.

Yes, obviously.

In the meantime, why can't we just be happy for cheap PBT doubleshots?

We can be, I'd just like to see innovation instead of taking the work of others without talking to them first.  Did they talk to Daniel, Bunny, or Lysol/Ivan before they did Miami, GH Nostalgia, and Toxic redux?  If they did, fine, if not, come on, take a chance and do something original.  There are literally hundreds or thousands of combinations they could do, ones I know people would love to see.

Offline LechnerDE

  • * Esteemed Elder
  • Posts: 2631
  • Location: Germany
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #37 on: Thu, 15 January 2015, 04:39:41 »
Just found this thread.

Very interesting indeed ....if only those keys weren't OEM Profile...

But knowing myself I'd probably order one of each anyway, because you can't go wrong with these prices :D

Offline sdiearly

  • Thread Starter
  • Posts: 178
  • Location: Taiwan
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #38 on: Thu, 15 January 2015, 05:22:18 »
Update full set pictures in OP.
My favorite 60%:  TEX-Beetle
                 80%:  KBtalKing Race
                100%: Cherry G80-3494, Zowie Celeritas

Offline LechnerDE

  • * Esteemed Elder
  • Posts: 2631
  • Location: Germany
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #39 on: Thu, 15 January 2015, 05:34:03 »
Update full set pictures in OP.

Thanks  :thumb:

I really like the orange/black set!

Offline CommonCurt

  • One of the cool kids
  • * Esteemed Elder
  • Posts: 4643
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #40 on: Thu, 15 January 2015, 12:59:35 »
Update full set pictures in OP.

Yeah the orange set looks good. Do you know if they will make Olivetti this way?
Some of Ye ole  Keyboards -->
More
OTD Koala:  62g Old MX-Blacks   |   LZ-GH V2:  MX-?62g   |   KMAC2:   62g Tactile MX-Greys   |   LZ CLS s:   62g Vintage MX-Blacks   |   X60:   62g Vintage MX-Blacks   |   GON NerD 60:  62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  62g MX-Clears  &   62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS/WTT ---->
More

Offline intelli78

  • Posts: 1503
  • Location: Seattle
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #41 on: Thu, 15 January 2015, 13:03:36 »
Very nice. Light years better than the Vortex PBT doubleshots. Will definitely pick up a couple sets -- I have been pleased with Tai Hao's ABS keycaps -- looking forward to these.
Please consider carefully before you decide to comment, for Jesus.

Offline Flyersfan1

  • * Destiny Supporter
  • Posts: 1209
  • Location: Philadelphia
  • Hi!
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #42 on: Thu, 15 January 2015, 13:14:30 »
Can't wait for these!! Any ideas on when they'll be available?
Quote from: Photekq
i know people who think salt is spicy

Offline CommonCurt

  • One of the cool kids
  • * Esteemed Elder
  • Posts: 4643
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #43 on: Thu, 15 January 2015, 16:59:44 »
Is anyone else not able to see the new pictures added to the OP?

When I first looked on my phone I could see them?  Now they are not even showing up in Firefox.


This is why Chrome is saying it can't display them

"403. That’s an error.

Your client does not have permission to get URL /0b8ttEFa50dCe1UXV9oDdCpMSUZH7YS0KarUoOvrtKjVuhwcs-bGsJX0ysjIOeSLgB6k_Lk3KYMJzOMC6XyOfW0SBJWS7T_g=w1242-h560 from this server.
(Client IP address: 2601:3:1380:566:3dd9:e5d0:8b1:b151)

Forbidden That’s all we know."
Some of Ye ole  Keyboards -->
More
OTD Koala:  62g Old MX-Blacks   |   LZ-GH V2:  MX-?62g   |   KMAC2:   62g Tactile MX-Greys   |   LZ CLS s:   62g Vintage MX-Blacks   |   X60:   62g Vintage MX-Blacks   |   GON NerD 60:  62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  62g MX-Clears  &   62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS/WTT ---->
More

Offline Huxley2500

  • Posts: 112
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #44 on: Thu, 15 January 2015, 17:49:41 »
I get same error.

Offline Hypersphere

  • Posts: 1886
  • Location: USA
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #45 on: Thu, 15 January 2015, 18:02:28 »
I hope they will also produce PBT sets with Alps/Matias-mount stems.

Offline sdiearly

  • Thread Starter
  • Posts: 178
  • Location: Taiwan
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #46 on: Thu, 15 January 2015, 19:11:35 »
Is anyone else not able to see the new pictures added to the OP?

When I first looked on my phone I could see them?  Now they are not even showing up in Firefox.


This is why Chrome is saying it can't display them

"403. That’s an error.

Your client does not have permission to get URL /0b8ttEFa50dCe1UXV9oDdCpMSUZH7YS0KarUoOvrtKjVuhwcs-bGsJX0ysjIOeSLgB6k_Lk3KYMJzOMC6XyOfW0SBJWS7T_g=w1242-h560 from this server.
(Client IP address: 2601:3:1380:566:3dd9:e5d0:8b1:b151)

Forbidden That’s all we know."

These images are saved in google drive, I have open the access right to everyone.

Maybe you need google account?
My favorite 60%:  TEX-Beetle
                 80%:  KBtalKing Race
                100%: Cherry G80-3494, Zowie Celeritas

Offline tmk1207

  • Posts: 448
  • Location: Viet Nam
  • Yêu Màu Tím
    • Vietnam Mechanical Keyboard Club <3
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #47 on: Thu, 15 January 2015, 23:11:53 »
Is anyone else not able to see the new pictures added to the OP?

When I first looked on my phone I could see them?  Now they are not even showing up in Firefox.


This is why Chrome is saying it can't display them

"403. That�s an error.

Your client does not have permission to get URL /0b8ttEFa50dCe1UXV9oDdCpMSUZH7YS0KarUoOvrtKjVuhwcs-bGsJX0ysjIOeSLgB6k_Lk3KYMJzOMC6XyOfW0SBJWS7T_g=w1242-h560 from this server.
(Client IP address: 2601:3:1380:566:3dd9:e5d0:8b1:b151)

Forbidden That�s all we know."

These images are saved in google drive, I have open the access right to everyone.

Maybe you need google account?

You can shared link folder images, right?

Offline CommonCurt

  • One of the cool kids
  • * Esteemed Elder
  • Posts: 4643
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #48 on: Fri, 16 January 2015, 00:03:17 »
Is anyone else not able to see the new pictures added to the OP?

When I first looked on my phone I could see them?  Now they are not even showing up in Firefox.


This is why Chrome is saying it can't display them

"403. That’s an error.

Your client does not have permission to get URL /0b8ttEFa50dCe1UXV9oDdCpMSUZH7YS0KarUoOvrtKjVuhwcs-bGsJX0ysjIOeSLgB6k_Lk3KYMJzOMC6XyOfW0SBJWS7T_g=w1242-h560 from this server.
(Client IP address: 2601:3:1380:566:3dd9:e5d0:8b1:b151)

Forbidden That’s all we know."

These images are saved in google drive, I have open the access right to everyone.

Maybe you need google account?

Hmm.  Yeah I'm always signed in to my Google account.  I wonder if it's something on GH's end? 

This is what I'm seeing:


I have tried 4 different browsers.
Some of Ye ole  Keyboards -->
More
OTD Koala:  62g Old MX-Blacks   |   LZ-GH V2:  MX-?62g   |   KMAC2:   62g Tactile MX-Greys   |   LZ CLS s:   62g Vintage MX-Blacks   |   X60:   62g Vintage MX-Blacks   |   GON NerD 60:  62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  62g MX-Clears  &   62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS/WTT ---->
More

Offline sdiearly

  • Thread Starter
  • Posts: 178
  • Location: Taiwan
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #49 on: Fri, 16 January 2015, 00:55:52 »
You can shared link folder images, right?

These images are in same folder.
https://drive.google.com/folderview?id=0B4bUYjC4F8Sadk50QktWZFVUcU0&usp=sharing

The strange point is that CommonCurt said he can view pictures on his phone previously.
But I didn't change anything on my google drive setting.

Probably language issue.
« Last Edit: Fri, 16 January 2015, 00:57:27 by sdiearly »
My favorite 60%:  TEX-Beetle
                 80%:  KBtalKing Race
                100%: Cherry G80-3494, Zowie Celeritas

Offline Evo_Spec

  • (╯°ヮ°)╯︵⌨
  • * Destiny Supporter
  • Posts: 1023
  • Location: Japan
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #50 on: Fri, 16 January 2015, 01:03:03 »
Dang those are sexy. i want an orange black set.

You may have linked the wrong link, unless these don't work.
Key caps box:


Key caps frame: (Foam Packaging)


1. Yellow/Black


2. Red/Black


3. Miami


4. Orange/Black


*edit* rearranged the pictures and changed the names to reflect OP.
« Last Edit: Fri, 16 January 2015, 01:05:47 by Evo_Spec »
.                 .  
GON NerD TKL DTA Edition

Offline sdiearly

  • Thread Starter
  • Posts: 178
  • Location: Taiwan
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #51 on: Fri, 16 January 2015, 01:35:48 »
The links are right.
Because some ones can see pictures.

They can review my thread like this:
« Last Edit: Fri, 16 January 2015, 01:40:09 by sdiearly »
My favorite 60%:  TEX-Beetle
                 80%:  KBtalKing Race
                100%: Cherry G80-3494, Zowie Celeritas

Offline Moralless

  • Posts: 526
  • Location: Sydney, Australia
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #52 on: Fri, 16 January 2015, 01:43:40 »
The links are right.
Because some ones can see pictures.

They can review my thread like this:
Show Image


I'm able to see the pictures from Evo's post but not from the OP.

Offline tmk1207

  • Posts: 448
  • Location: Viet Nam
  • Yêu Màu Tím
    • Vietnam Mechanical Keyboard Club <3
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #53 on: Fri, 16 January 2015, 02:29:55 »
You can shared link folder images, right?

These images are in same folder.
https://drive.google.com/folderview?id=0B4bUYjC4F8Sadk50QktWZFVUcU0&usp=sharing

The strange point is that CommonCurt said he can view pictures on his phone previously.
But I didn't change anything on my google drive setting.

Probably language issue.

Thank you :p

Offline infiniti

  • I <3 KB
  • * Senior Moderator
  • Posts: 2405
  • Location: Thrilla, Manila, Philippines
  • Bob was here
    • PM me and ask for a custom title!
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #54 on: Fri, 16 January 2015, 08:36:22 »
I've uploaded the pictures to imgur and fixed the links in the OP. :thumb:

Offline Flyersfan1

  • * Destiny Supporter
  • Posts: 1209
  • Location: Philadelphia
  • Hi!
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #55 on: Fri, 16 January 2015, 08:40:18 »
I've uploaded the pictures to imgur and fixed the links in the OP. :thumb:
Thanks infiniti! I can't wait to try these out!


MOD NOTE: You're welcome! :p
« Last Edit: Fri, 16 January 2015, 08:49:03 by infiniti »
Quote from: Photekq
i know people who think salt is spicy

Offline Data

  • Posts: 2608
  • Location: Orlando, FL
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #56 on: Fri, 16 January 2015, 08:46:10 »
I want that orange set, but reverse the colorway (black alphas). :P


Offline Thalandros

  • Posts: 1
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #57 on: Fri, 16 January 2015, 16:56:23 »
Wow. I want one or two of these. They look amazing, especially for someone on a budget like me. Is there a rough ETA on these? if it is (and it's closeby) I might skip on the Vortex PBTs I was planning on getting.

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 21175
  • Location: melbourne.vic.au
  • Missed another sale.
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #58 on: Fri, 16 January 2015, 19:56:29 »
That yellow set looks a bit greenish to me.
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But that’s incorrect. It’s in HHKB’s slogan, but when America’s cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Offline Evo_Spec

  • (╯°ヮ°)╯︵⌨
  • * Destiny Supporter
  • Posts: 1023
  • Location: Japan
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #59 on: Fri, 16 January 2015, 21:53:36 »
That yellow set looks a bit greenish to me.
Pretty sure that's due to the camera's white balance, here's a quick Lightroom auto white balance i threw together.

.                 .  
GON NerD TKL DTA Edition

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 21175
  • Location: melbourne.vic.au
  • Missed another sale.
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #60 on: Sat, 17 January 2015, 01:03:20 »
Those both look a bit greenish to me :p

Maybe it's my eyes ...
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But that’s incorrect. It’s in HHKB’s slogan, but when America’s cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Offline psyEDk

  • Posts: 11
  • Location: melbourne.au
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #61 on: Sat, 17 January 2015, 22:15:41 »
I want that orange set, but reverse the colorway (black alphas). :P

Seconded!
That would look awesome  :))

Offline AKmalamute

  • HHKB Scrub
  • Posts: 837
  • Location: Western WA, USA
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #62 on: Sat, 17 January 2015, 23:28:32 »
almost any of those combinations would be fine by me.

Looking forward to this actually happening!

HHKB-lite2, Dvorak user

Offline Knxwledge

  • Posts: 20
  • Location: San Diego, CA
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #63 on: Sun, 18 January 2015, 11:25:18 »
when???

Offline oledome

  • Posts: 86
  • Location: London, England
  • not batman
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #64 on: Sun, 18 January 2015, 13:18:22 »
Do want ISO.

Offline jabbon

  • Posts: 54
  • Location: Ams
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #65 on: Sun, 18 January 2015, 16:13:07 »

Offline Findecanor

  • Posts: 5036
  • Location: Koriko
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #66 on: Mon, 19 January 2015, 02:09:38 »
I was about to write "No ISO = Lame". :P

Offline sdiearly

  • Thread Starter
  • Posts: 178
  • Location: Taiwan
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #67 on: Mon, 19 January 2015, 03:00:49 »
when???

My order may be delivered at mid Feb. :)
My favorite 60%:  TEX-Beetle
                 80%:  KBtalKing Race
                100%: Cherry G80-3494, Zowie Celeritas

Offline MAR82

  • Posts: 494
  • Location: It says I'm in France
  • Keyboard Addict
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #68 on: Mon, 19 January 2015, 08:07:07 »
Tai Hao is old and established, not new and are already large and succesful, finally breaking into the niche market with retailers like Newegg. 

Given that we have done GBs with them in colors we requested, I don't doubt that these colors were requested instead of doing novel colors.  Even if they weren't, the push should be for novel ideas and we should be working with the manufacturer to realize the concept.

I would like to see new schemes, not rehashed.

Yes, obviously.

In the meantime, why can't we just be happy for cheap PBT doubleshots?

We can be, I'd just like to see innovation instead of taking the work of others without talking to them first.  Did they talk to Daniel, Bunny, or Lysol/Ivan before they did Miami, GH Nostalgia, and Toxic redux?  If they did, fine, if not, come on, take a chance and do something original.  There are literally hundreds or thousands of combinations they could do, ones I know people would love to see.

Hi Nubb, you keep saying that they copied the Toxic set. First you say Toxic Lite , then you call it Toxic redux. But to me it looks much closer to the Bumblebee Set, over at KeyPop

Offline sidel

  • Posts: 20
  • Location: CA
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #69 on: Mon, 19 January 2015, 13:33:21 »
You've definitely caught my interest. This looks very promising.

Offline Knxwledge

  • Posts: 20
  • Location: San Diego, CA
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #70 on: Tue, 20 January 2015, 16:49:31 »
when???

My order may be delivered at mid Feb. :)

Are you gonna be doing a Group buy ?

or

Where can we purchase these?

Offline Flyersfan1

  • * Destiny Supporter
  • Posts: 1209
  • Location: Philadelphia
  • Hi!
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #71 on: Tue, 20 January 2015, 17:00:06 »
when???

My order may be delivered at mid Feb. :)

Are you gonna be doing a Group buy ?

or

Where can we purchase these?
Mechanicalkeyboards.com said they're getting some.
Quote from: Photekq
i know people who think salt is spicy

Offline sdiearly

  • Thread Starter
  • Posts: 178
  • Location: Taiwan
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #72 on: Wed, 21 January 2015, 22:33:15 »
Tai Hao will sell key cap sets directly in Taiwan.
outside marketing depend on other company.
My favorite 60%:  TEX-Beetle
                 80%:  KBtalKing Race
                100%: Cherry G80-3494, Zowie Celeritas

Offline CommonCurt

  • One of the cool kids
  • * Esteemed Elder
  • Posts: 4643
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #73 on: Wed, 21 January 2015, 22:34:53 »
Tai Hao will sell key cap sets directly in Taiwan.
outside marketing depend on other company.

Have you heard if they will be making a Olivetti set in double shot PBT?
Some of Ye ole  Keyboards -->
More
OTD Koala:  62g Old MX-Blacks   |   LZ-GH V2:  MX-?62g   |   KMAC2:   62g Tactile MX-Greys   |   LZ CLS s:   62g Vintage MX-Blacks   |   X60:   62g Vintage MX-Blacks   |   GON NerD 60:  62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  62g MX-Clears  &   62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS/WTT ---->
More

Offline 00zeRO

  • mechanicalkeyboards.com
  • * Commercial Vendor
  • Posts: 2372
  • Location: Tennessee
  • The 00verseer of Vault 77
    • Mechanical Keyboards
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #74 on: Fri, 23 January 2015, 13:31:41 »
Tai Hao will sell key cap sets directly in Taiwan.
outside marketing depend on other company.

Some companies have a bead on these, sho nuff

:-X
Daily Driver: Typist A w/Midnight Dawn | Kailh BOX Clicks

          
Junktown 2: Now on eBay!

Offline 00zeRO

  • mechanicalkeyboards.com
  • * Commercial Vendor
  • Posts: 2372
  • Location: Tennessee
  • The 00verseer of Vault 77
    • Mechanical Keyboards
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #75 on: Fri, 23 January 2015, 14:17:12 »
when???

My order may be delivered at mid Feb. :)

Are you gonna be doing a Group buy ?

or

Where can we purchase these?
Mechanicalkeyboards.com said they're getting some.

Wha-! We said we were getting Tao Hao ABS doubleshots... :-X
Daily Driver: Typist A w/Midnight Dawn | Kailh BOX Clicks

          
Junktown 2: Now on eBay!

Offline Flyersfan1

  • * Destiny Supporter
  • Posts: 1209
  • Location: Philadelphia
  • Hi!
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #76 on: Fri, 23 January 2015, 14:19:46 »
Quote from: Photekq
i know people who think salt is spicy

Offline 00zeRO

  • mechanicalkeyboards.com
  • * Commercial Vendor
  • Posts: 2372
  • Location: Tennessee
  • The 00verseer of Vault 77
    • Mechanical Keyboards
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #77 on: Fri, 23 January 2015, 16:41:49 »
when???

My order may be delivered at mid Feb. :)

Are you gonna be doing a Group buy ?

or

Where can we purchase these?
Mechanicalkeyboards.com said they're getting some.

Wha-! We said we were getting Tao Hao ABS doubleshots... :-X
https://geekhack.org/index.php?topic=31221.msg1598321#msg1598321
The cat is sufficiently out of the bag...lol
Daily Driver: Typist A w/Midnight Dawn | Kailh BOX Clicks

          
Junktown 2: Now on eBay!

Offline sethk_

  • Grand Master Wizard Pizza
  • * Esteemed Elder
  • Posts: 2710
  • Location: Pittsburgh, Pennsylvania
  • www.kbdhub.com
    • My webstore

Offline Huxley2500

  • Posts: 112
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #79 on: Fri, 23 January 2015, 17:12:35 »
When?

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 21175
  • Location: melbourne.vic.au
  • Missed another sale.
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #80 on: Fri, 23 January 2015, 23:39:17 »
when???

My order may be delivered at mid Feb. :)

Are you gonna be doing a Group buy ?

or

Where can we purchase these?
Mechanicalkeyboards.com said they're getting some.

Wha-! We said we were getting Tao Hao ABS doubleshots... :-X
https://geekhack.org/index.php?topic=31221.msg1598321#msg1598321
The cat is sufficiently out of the bag...lol

The cat and the bag have gone their separate ways :))
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But that’s incorrect. It’s in HHKB’s slogan, but when America’s cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Offline 00zeRO

  • mechanicalkeyboards.com
  • * Commercial Vendor
  • Posts: 2372
  • Location: Tennessee
  • The 00verseer of Vault 77
    • Mechanical Keyboards
Daily Driver: Typist A w/Midnight Dawn | Kailh BOX Clicks

          
Junktown 2: Now on eBay!

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 21175
  • Location: melbourne.vic.au
  • Missed another sale.
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But that’s incorrect. It’s in HHKB’s slogan, but when America’s cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Offline base_on_base

  • Posts: 27
  • Resident Hydroxide
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #83 on: Mon, 26 January 2015, 15:46:22 »
When/where are these available? I couldn't find any information on Tai-Hao's website.
                           
WASD V2 - MX Green / Aqua - MX Green(WIP) / Unicomp Ultra Classic - Buckling Springs

Offline sdiearly

  • Thread Starter
  • Posts: 178
  • Location: Taiwan
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #84 on: Fri, 30 January 2015, 00:15:31 »
When/where are these available? I couldn't find any information on Tai-Hao's website.

Tai-Hao is a vendor, they do not sell product to end user directly.
My favorite 60%:  TEX-Beetle
                 80%:  KBtalKing Race
                100%: Cherry G80-3494, Zowie Celeritas

Offline rabidwombat

  • Posts: 25
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #85 on: Thu, 05 February 2015, 08:23:44 »
I was just surfing around Taobao, and sets are already going on sale from a couple of sellers there!

Before shipping (in Chinese Yuan), they cost around 200, compared to ~130 for the dual-color ABS sets, and ~100 for the single color ABS sets.

This should be a rough indication on the relative prices between the Tai-Hao sets.

Offline 00zeRO

  • mechanicalkeyboards.com
  • * Commercial Vendor
  • Posts: 2372
  • Location: Tennessee
  • The 00verseer of Vault 77
    • Mechanical Keyboards
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #86 on: Thu, 05 February 2015, 09:41:45 »
We will be carrying them, and should have the first shipment by the end of February.  :thumb:
Daily Driver: Typist A w/Midnight Dawn | Kailh BOX Clicks

          
Junktown 2: Now on eBay!

Offline Data

  • Posts: 2608
  • Location: Orlando, FL
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #87 on: Thu, 05 February 2015, 11:50:36 »
We will be carrying them, and should have the first shipment by the end of February.  :thumb:


Offline jabbon

  • Posts: 54
  • Location: Ams
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #88 on: Thu, 05 February 2015, 14:07:27 »
We will be carrying them, and should have the first shipment by the end of February.  :thumb:

PBT or ABS?

Offline sethk_

  • Grand Master Wizard Pizza
  • * Esteemed Elder
  • Posts: 2710
  • Location: Pittsburgh, Pennsylvania
  • www.kbdhub.com
    • My webstore
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #89 on: Thu, 05 February 2015, 14:46:01 »
We will be carrying them, and should have the first shipment by the end of February.  :thumb:

PBT or ABS?
Doubleshot PBT

Offline 00zeRO

  • mechanicalkeyboards.com
  • * Commercial Vendor
  • Posts: 2372
  • Location: Tennessee
  • The 00verseer of Vault 77
    • Mechanical Keyboards
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #90 on: Thu, 05 February 2015, 15:00:40 »
We will be carrying them, and should have the first shipment by the end of February.  :thumb:

PBT or ABS?

All the banter between me and Flyersfan was just for fun. They will be PBT Doubleshot sets, we currently carry many of the ABS colors, however.
Daily Driver: Typist A w/Midnight Dawn | Kailh BOX Clicks

          
Junktown 2: Now on eBay!

Offline BrewCaps

  • Posts: 114
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #91 on: Thu, 05 February 2015, 20:23:59 »
We will be carrying them, and should have the first shipment by the end of February.  :thumb:

PBT or ABS?

All the banter between me and Flyersfan was just for fun. They will be PBT Doubleshot sets, we currently carry many of the ABS colors, however.

Good news!

Offline jabbon

  • Posts: 54
  • Location: Ams
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #92 on: Tue, 10 February 2015, 13:40:38 »
We will be carrying them, and should have the first shipment by the end of February.  :thumb:

PBT or ABS?

All the banter between me and Flyersfan was just for fun. They will be PBT Doubleshot sets, we currently carry many of the ABS colors, however.

What about international shipping cost? Is it somehow affordable for europeans?

Offline 00zeRO

  • mechanicalkeyboards.com
  • * Commercial Vendor
  • Posts: 2372
  • Location: Tennessee
  • The 00verseer of Vault 77
    • Mechanical Keyboards
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #93 on: Tue, 10 February 2015, 13:56:21 »
We will be carrying them, and should have the first shipment by the end of February.  :thumb:

PBT or ABS?

All the banter between me and Flyersfan was just for fun. They will be PBT Doubleshot sets, we currently carry many of the ABS colors, however.

What about international shipping cost? Is it somehow affordable for europeans?

If you go to our website and add one of our currently stocked keycaps to your cart, and then proceed to checkout, it should calculate your shipping. If you need further assistance, just PM me, please.
Daily Driver: Typist A w/Midnight Dawn | Kailh BOX Clicks

          
Junktown 2: Now on eBay!

Offline sdiearly

  • Thread Starter
  • Posts: 178
  • Location: Taiwan
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #94 on: Wed, 11 February 2015, 00:37:21 »
Update my received order~~
My favorite 60%:  TEX-Beetle
                 80%:  KBtalKing Race
                100%: Cherry G80-3494, Zowie Celeritas

Offline Evo_Spec

  • (╯°ヮ°)╯︵⌨
  • * Destiny Supporter
  • Posts: 1023
  • Location: Japan
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #95 on: Wed, 11 February 2015, 08:33:52 »
Update my received order~~

Thanks for the update, these look pretty sweet.
.                 .  
GON NerD TKL DTA Edition

Offline slip84

  • Posts: 475
  • Location: Canada
  • GUYDUDE MAGICIAN
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #96 on: Wed, 11 February 2015, 08:35:18 »
Argh. Wish these were Cherry profile. They look nice.

Offline Flyersfan1

  • * Destiny Supporter
  • Posts: 1209
  • Location: Philadelphia
  • Hi!
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #97 on: Thu, 12 February 2015, 09:27:24 »
These are now up for pre-order, I can't wait to pick up the orange+black set.  I missed out on Nostalgia, and they are my favorite hockey teams colors, so it's a win-win for me.

=Tai+Hao&s[title]=Y&s[short_desc]=Y&s[full_desc]=Y&s[sku]=Y&s[match]=all&s[cid]=40]http://mechanicalkeyboards.com/shop/index.php?l=search_list&s[search]=Tai+Hao&s[title]=Y&s[short_desc]=Y&s[full_desc]=Y&s[sku]=Y&s[match]=all&s[cid]=40

Miami also available for pre-order, how do I link shorten with my own text? I'm such a forum noob.
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1168
« Last Edit: Thu, 12 February 2015, 09:31:47 by Flyersfan1 »
Quote from: Photekq
i know people who think salt is spicy

Offline slip84

  • Posts: 475
  • Location: Canada
  • GUYDUDE MAGICIAN

Offline ccc24

  • Posts: 230
  • Location: San Diego, USA
  • HHKB , Ergodox
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #99 on: Thu, 12 February 2015, 12:01:36 »
says out of stock, is that just because it's preorders only?

Offline 00zeRO

  • mechanicalkeyboards.com
  • * Commercial Vendor
  • Posts: 2372
  • Location: Tennessee
  • The 00verseer of Vault 77
    • Mechanical Keyboards
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #100 on: Thu, 12 February 2015, 12:15:12 »
says out of stock, is that just because it's preorders only?

Yes. We are accepting preorders until they get here hopefully by the end of next week.
Daily Driver: Typist A w/Midnight Dawn | Kailh BOX Clicks

          
Junktown 2: Now on eBay!

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 21175
  • Location: melbourne.vic.au
  • Missed another sale.
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #101 on: Thu, 12 February 2015, 15:21:47 »
says out of stock, is that just because it's preorders only?

Yes. We are accepting preorders until they get here hopefully by the end of next week.

In your pictures there are two panels with keycap cutouts.

In the ones with the keycap pullers, the key in the top right corner seems to have been whiteouted.

What is it?

"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But that’s incorrect. It’s in HHKB’s slogan, but when America’s cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Offline CommonCurt

  • One of the cool kids
  • * Esteemed Elder
  • Posts: 4643
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #102 on: Thu, 12 February 2015, 16:06:00 »
says out of stock, is that just because it's preorders only?

Yes. We are accepting preorders until they get here hopefully by the end of next week.

I know I've asked this a few times, but I have yet to get a response from anyone.

Do you know if they plan on making a Olivetti, or classic beige double shot PBT set(s)?
Some of Ye ole  Keyboards -->
More
OTD Koala:  62g Old MX-Blacks   |   LZ-GH V2:  MX-?62g   |   KMAC2:   62g Tactile MX-Greys   |   LZ CLS s:   62g Vintage MX-Blacks   |   X60:   62g Vintage MX-Blacks   |   GON NerD 60:  62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  62g MX-Clears  &   62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS/WTT ---->
More

Offline Permeability

  • Posts: 192
  • Location: USA
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #103 on: Thu, 12 February 2015, 18:12:03 »
says out of stock, is that just because it's preorders only?

Yes. We are accepting preorders until they get here hopefully by the end of next week.

In your pictures there are two panels with keycap cutouts.

In the ones with the keycap pullers, the key in the top right corner seems to have been whiteouted.

What is it?

(Attachment Link)
Check the updated first post, seems like some purple cap
Keyboards:
'The Cheat' - lubed 62g Clears
Ducky Shine 3 TKL lubed 45g Reds (Work)

Offline sdiearly

  • Thread Starter
  • Posts: 178
  • Location: Taiwan
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #104 on: Thu, 12 February 2015, 21:56:47 »
says out of stock, is that just because it's preorders only?

Yes. We are accepting preorders until they get here hopefully by the end of next week.

In your pictures there are two panels with keycap cutouts.

In the ones with the keycap pullers, the key in the top right corner seems to have been whiteouted.

What is it?

(Attachment Link)
Check the updated first post, seems like some purple cap

Beside base set (US ansi-104 keys), other extra keys depend on order,
From China, they may ask for 104 + 10 keys.
From my order, Tai-hao gave me 104 + 1(Cherry's off-center stem capslock) + 1 keys
From Taiwan, I found the retails have 2 SKU, 104 keys only and 114 keys like China's.
In mechanicalkeyboards website, the set seems with 104 + 7 keys

It's better to describe the detail which add-on keys this set will have.

The purple key is another series from Tai-Hao.
And I have the samples.


My favorite 60%:  TEX-Beetle
                 80%:  KBtalKing Race
                100%: Cherry G80-3494, Zowie Celeritas

Offline simonyunhe

  • Posts: 238
  • Location: Alxa, China
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #105 on: Sat, 14 February 2015, 03:39:12 »
Just receive my Taihao Miami.




KeyBs:|RS96-Brown|GS-87-White|DIYer60-Red|VA68M-Brown|GS-ALT71-Blue|IKBC-108-Black|
KeyCs:|SA Carbon R1+2|SA Camping|SA Amazing Chocolatier|SA Commando 88 Ghost|SA Hyperfuse|SA Penumbra|SA Doom|SA Creamy Orange|SA Ocean Dolch|SA Lotus*72|SA Trouble Minds R2|DSA Granite|GMK TA|GMK Soware|XDA Mailstone|GM Ember|

Offline CommonCurt

  • One of the cool kids
  • * Esteemed Elder
  • Posts: 4643
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #106 on: Sat, 14 February 2015, 04:04:26 »
Just receive my Taihao Miami.
Show Image


Lookin good with that white case  :)
Some of Ye ole  Keyboards -->
More
OTD Koala:  62g Old MX-Blacks   |   LZ-GH V2:  MX-?62g   |   KMAC2:   62g Tactile MX-Greys   |   LZ CLS s:   62g Vintage MX-Blacks   |   X60:   62g Vintage MX-Blacks   |   GON NerD 60:  62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  62g MX-Clears  &   62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS/WTT ---->
More

Offline base_on_base

  • Posts: 27
  • Resident Hydroxide
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #107 on: Sat, 14 February 2015, 10:23:31 »
Just receive my Taihao Miami.
Show Image

Show Image

Show Image

Show Image

Show Image


Yup, I'm sold.
                           
WASD V2 - MX Green / Aqua - MX Green(WIP) / Unicomp Ultra Classic - Buckling Springs

Offline 00zeRO

  • mechanicalkeyboards.com
  • * Commercial Vendor
  • Posts: 2372
  • Location: Tennessee
  • The 00verseer of Vault 77
    • Mechanical Keyboards
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #108 on: Sat, 14 February 2015, 13:00:41 »
says out of stock, is that just because it's preorders only?

Yes. We are accepting preorders until they get here hopefully by the end of next week.

In your pictures there are two panels with keycap cutouts.

In the ones with the keycap pullers, the key in the top right corner seems to have been whiteouted.

What is it?

(Attachment Link)
The photos we have are the stock photos that Tai-Hao provided. Honestly, they have not disclosed any info regarding what is edited out of the pics. They may be items that would be copyright protected here in the US?
Daily Driver: Typist A w/Midnight Dawn | Kailh BOX Clicks

          
Junktown 2: Now on eBay!

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 21175
  • Location: melbourne.vic.au
  • Missed another sale.
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #109 on: Sat, 14 February 2015, 18:42:17 »
says out of stock, is that just because it's preorders only?

Yes. We are accepting preorders until they get here hopefully by the end of next week.

In your pictures there are two panels with keycap cutouts.

In the ones with the keycap pullers, the key in the top right corner seems to have been whiteouted.

What is it?

(Attachment Link)
The photos we have are the stock photos that Tai-Hao provided. Honestly, they have not disclosed any info regarding what is edited out of the pics. They may be items that would be copyright protected here in the US?

Fair enough.

I have seen a couple of pictures of the sets elsewhere, and what is there didn't seem to warrant obfuscation.  Maybe different sets have different extras.
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But that’s incorrect. It’s in HHKB’s slogan, but when America’s cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Offline simonyunhe

  • Posts: 238
  • Location: Alxa, China
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #110 on: Sun, 15 February 2015, 02:56:57 »
says out of stock, is that just because it's preorders only?

Yes. We are accepting preorders until they get here hopefully by the end of next week.

In your pictures there are two panels with keycap cutouts.

In the ones with the keycap pullers, the key in the top right corner seems to have been whiteouted.

What is it?

(Attachment Link)
The photos we have are the stock photos that Tai-Hao provided. Honestly, they have not disclosed any info regarding what is edited out of the pics. They may be items that would be copyright protected here in the US?

Fair enough.

I have seen a couple of pictures of the sets elsewhere, and what is there didn't seem to warrant obfuscation.  Maybe different sets have different extras.
I will just tell you guys what I received from the GB run by a Taihao authorized agent in China. Hopefully this might be helpful. The total keys inside the package should 114 keys + a mysterious keys. At this GB I could choose to have a full set of keys or 104 keys which take out the extra 10 keys. Finaly what I pick up 104 keys since my keyboard do not need the extra one. Here is everything in the package. (Please ignore the white caps in the first box, this is my Poker 2's original keycaps, I had already put the Miami keycaps on my keyboard.)


More detail about the mysterious key, I think the material covered outside the key is rubber to give more texture and the color I received is red but the pic I saw before is more purple to me.



The extra keys (10 in total) + ISO kit.

KeyBs:|RS96-Brown|GS-87-White|DIYer60-Red|VA68M-Brown|GS-ALT71-Blue|IKBC-108-Black|
KeyCs:|SA Carbon R1+2|SA Camping|SA Amazing Chocolatier|SA Commando 88 Ghost|SA Hyperfuse|SA Penumbra|SA Doom|SA Creamy Orange|SA Ocean Dolch|SA Lotus*72|SA Trouble Minds R2|DSA Granite|GMK TA|GMK Soware|XDA Mailstone|GM Ember|

Offline jonathanyu

  • Posts: 1353
  • Location: San Francisco,California
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #111 on: Sun, 15 February 2015, 23:02:06 »
That doesn't look like a iso enter to me

Offline intelli78

  • Posts: 1503
  • Location: Seattle
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #112 on: Sun, 15 February 2015, 23:06:41 »
That doesn't look like a iso enter to me

LOL... no it is not...
Please consider carefully before you decide to comment, for Jesus.

Offline KatzenKinder

  • * Maker
  • Posts: 382
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #113 on: Mon, 16 February 2015, 00:46:52 »
Wait... Oh my god. this could finally be a set for my Zowie! Who the hell made a big ass enter, really though!

Offline simonyunhe

  • Posts: 238
  • Location: Alxa, China
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #114 on: Mon, 16 February 2015, 04:01:28 »
That doesn't look like a iso enter to me
I just find the "ISO Kit" is specific for SteelSeries 6GV2 and 7G keyboard. :eek:
KeyBs:|RS96-Brown|GS-87-White|DIYer60-Red|VA68M-Brown|GS-ALT71-Blue|IKBC-108-Black|
KeyCs:|SA Carbon R1+2|SA Camping|SA Amazing Chocolatier|SA Commando 88 Ghost|SA Hyperfuse|SA Penumbra|SA Doom|SA Creamy Orange|SA Ocean Dolch|SA Lotus*72|SA Trouble Minds R2|DSA Granite|GMK TA|GMK Soware|XDA Mailstone|GM Ember|

Offline ManicMatt1125

  • Posts: 149
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #115 on: Tue, 17 February 2015, 08:29:39 »
says out of stock, is that just because it's preorders only?

Yes. We are accepting preorders until they get here hopefully by the end of next week.

In your pictures there are two panels with keycap cutouts.

In the ones with the keycap pullers, the key in the top right corner seems to have been whiteouted.

What is it?

(Attachment Link)
Check the updated first post, seems like some purple cap

Beside base set (US ansi-104 keys), other extra keys depend on order,
From China, they may ask for 104 + 10 keys.
From my order, Tai-hao gave me 104 + 1(Cherry's off-center stem capslock) + 1 keys
From Taiwan, I found the retails have 2 SKU, 104 keys only and 114 keys like China's.
In mechanicalkeyboards website, the set seems with 104 + 7 keys

It's better to describe the detail which add-on keys this set will have.

The purple key is another series from Tai-Hao.
And I have the samples.
Show Image

Show Image

Show Image


Any word on the Purple and Blue keys? How can I buy these?

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 21175
  • Location: melbourne.vic.au
  • Missed another sale.
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #116 on: Tue, 17 February 2015, 15:06:08 »
Any word on the Purple and Blue keys? How can I buy these?

qtan might be stocking these soonish ...

https://geekhack.org/index.php?topic=68753.msg1644587#msg1644587
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But that’s incorrect. It’s in HHKB’s slogan, but when America’s cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Offline Kreepz

  • Posts: 8
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #117 on: Thu, 19 February 2015, 01:07:16 »
Im ready to order! where do I order a set?
1. Yellow/Black

Offline CommonCurt

  • One of the cool kids
  • * Esteemed Elder
  • Posts: 4643
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #118 on: Thu, 19 February 2015, 02:23:51 »
Some of Ye ole  Keyboards -->
More
OTD Koala:  62g Old MX-Blacks   |   LZ-GH V2:  MX-?62g   |   KMAC2:   62g Tactile MX-Greys   |   LZ CLS s:   62g Vintage MX-Blacks   |   X60:   62g Vintage MX-Blacks   |   GON NerD 60:  62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  62g MX-Clears  &   62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS/WTT ---->
More

Offline 00zeRO

  • mechanicalkeyboards.com
  • * Commercial Vendor
  • Posts: 2372
  • Location: Tennessee
  • The 00verseer of Vault 77
    • Mechanical Keyboards
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #119 on: Thu, 19 February 2015, 12:40:34 »
We now have them in stock at MechanicalKeyboards.com!
Daily Driver: Typist A w/Midnight Dawn | Kailh BOX Clicks

          
Junktown 2: Now on eBay!

Offline slip84

  • Posts: 475
  • Location: Canada
  • GUYDUDE MAGICIAN
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #120 on: Thu, 19 February 2015, 12:43:39 »

Offline Lu_e

  • Posts: 647
  • Location: NWUSA
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #121 on: Thu, 19 February 2015, 13:53:33 »
The whole multi color thing... why? Just make them uniform.

Offline Jixr

  • Posts: 864
  • Location: Austin Tx
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #122 on: Thu, 19 February 2015, 14:09:14 »
ordered a miami set, i'm curious as to how the quality is. ( espc since I hate sp's keycap quality for the price of their caps )

Offline Kreepz

  • Posts: 8
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #123 on: Fri, 20 February 2015, 02:46:01 »

Thank you!! SOLD TO ME! will post pics when I receive them.

Im ready to order! where do I order a set?
1. Yellow/Black

Here --->  http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1171

Offline MathiasR

  • Posts: 1
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #124 on: Fri, 20 February 2015, 03:12:25 »
Damn I need some ISO kits for this one  :eek:

Offline KnivesM

  • Posts: 532
  • Location: Ohio
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #125 on: Wed, 25 February 2015, 23:31:58 »
Has anyone been able to find any sets on TaoBao or any other sites that have the big ass enter set? I've been looking on TaoBao and can't seem to find any. All i'm able to find is the 114 sets which don't appear to have the big ass enter...

Edit: found a few, have links posted on Qtans subforum for a proxy hopefully
« Last Edit: Wed, 25 February 2015, 23:52:34 by KnivesM »
[WTT] Bros | HWS | Nightcaps [WTTF] Bros | KBK/KWK | CC

                               
           LZ-FE                 Kpad           Poker II                   Leopold 980M          TGR Tris       TGR-Jane   
72g Vintage Blacks      Blacks            Blues                        Silent Pinks                Coming Soon™
 
Others
More
Leopold 750RT - Reds, Smart68 Coming Soon™, Steelseries 6Gv2 - Reds

Offline Jixr

  • Posts: 864
  • Location: Austin Tx
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #126 on: Thu, 26 February 2015, 10:34:13 »
Got my miami set from MK, and the spacebar had a crack in it, hopefully its just a minor issue and does not reflect on the QC of the brand, but so far, I'm really liking the set.

Offline 00zeRO

  • mechanicalkeyboards.com
  • * Commercial Vendor
  • Posts: 2372
  • Location: Tennessee
  • The 00verseer of Vault 77
    • Mechanical Keyboards
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #127 on: Thu, 26 February 2015, 13:50:19 »
Got my miami set from MK, and the spacebar had a crack in it, hopefully its just a minor issue and does not reflect on the QC of the brand, but so far, I'm really liking the set.

We are certainly sorry to hear that.

If we haven't already heard from you, please shoot us an email at support@mechanicalkeyboards.com and we will assist you with either a small refund, or return for your whole set.
Daily Driver: Typist A w/Midnight Dawn | Kailh BOX Clicks

          
Junktown 2: Now on eBay!

Offline irjoe

  • Posts: 111
  • Location: San Diego
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #128 on: Fri, 27 February 2015, 17:41:02 »
Anyone else have pictures of other sets than the miami set? Curious how the other sets look on keyboard

Offline munch

  • Posts: 507
  • Location: Канада
  • !
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #129 on: Fri, 27 February 2015, 20:06:10 »
the Big Ass Enter doesn't come with these sets right?
I'd be interested in the http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1170 set if it did come with the "ISO Kit".
for a 6Gv2.

confirm/deny please? :p

Offline KnivesM

  • Posts: 532
  • Location: Ohio
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #130 on: Sat, 28 February 2015, 00:23:40 »
the Big Ass Enter doesn't come with these sets right?
I'd be interested in the http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1170 set if it did come with the "ISO Kit".
for a 6Gv2.

confirm/deny please? :p
They do not, I bought a set hoping they would.  Although Qtan said he would be stocking sets that do on his site soon(next week maybe).
[WTT] Bros | HWS | Nightcaps [WTTF] Bros | KBK/KWK | CC

                               
           LZ-FE                 Kpad           Poker II                   Leopold 980M          TGR Tris       TGR-Jane   
72g Vintage Blacks      Blacks            Blues                        Silent Pinks                Coming Soon™
 
Others
More
Leopold 750RT - Reds, Smart68 Coming Soon™, Steelseries 6Gv2 - Reds

Offline munch

  • Posts: 507
  • Location: Канада
  • !
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #131 on: Sat, 28 February 2015, 23:12:58 »
the Big Ass Enter doesn't come with these sets right?
I'd be interested in the http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1170 set if it did come with the "ISO Kit".
for a 6Gv2.

confirm/deny please? :p
They do not, I bought a set hoping they would.  Although Qtan said he would be stocking sets that do on his site soon(next week maybe).

great, thank you very much! I will keep my eyes open.

Offline Jixr

  • Posts: 864
  • Location: Austin Tx
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #132 on: Mon, 02 March 2015, 08:43:45 »
Got my miami set from MK, and the spacebar had a crack in it, hopefully its just a minor issue and does not reflect on the QC of the brand, but so far, I'm really liking the set.

We are certainly sorry to hear that.

If we haven't already heard from you, please shoot us an email at support@mechanicalkeyboards.com and we will assist you with either a small refund, or return for your whole set.
I got a replacement spacebar, thanks for your help.

Offline sdiearly

  • Thread Starter
  • Posts: 178
  • Location: Taiwan
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #133 on: Thu, 05 March 2015, 20:15:53 »
Anyone else have pictures of other sets than the miami set? Curious how the other sets look on keyboard

Maybe I can show you after I get add-on keys for Celeritas / SS 7G / WKL Layout
My favorite 60%:  TEX-Beetle
                 80%:  KBtalKing Race
                100%: Cherry G80-3494, Zowie Celeritas

Offline sdiearly

  • Thread Starter
  • Posts: 178
  • Location: Taiwan
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #134 on: Mon, 16 March 2015, 00:52:55 »
Update pictures of Add-on Keys in OP
My favorite 60%:  TEX-Beetle
                 80%:  KBtalKing Race
                100%: Cherry G80-3494, Zowie Celeritas

Offline bcredbottle

  • Posts: 695
  • Location: Seattle, Washington
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #135 on: Tue, 07 April 2015, 07:33:23 »
I hope they will also produce PBT sets with Alps/Matias-mount stems.

Is there something we could do? Maybe start a MassDrop or contact the seller?

Edit: That message wasn't meant to be sarcastic. I'm genuinely interested
« Last Edit: Wed, 08 April 2015, 08:22:53 by bcredbottle »

Offline LennyRhys

  • Posts: 15
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #136 on: Wed, 08 April 2015, 04:30:41 »
I got a Taihao white-on-red set a while ago and IMO they are considerably better quality than SP caps (I have over 1,000 random SP caps left over from a grab bag group buy).  I'd still use SP but they are far too expensive based on the quality and variety that Taihao offer.

Offline Nikelu

  • Posts: 81
  • Don't read this!
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #137 on: Sat, 18 April 2015, 08:42:22 »
Does anyone have the orange black keycaps installed? They look really good and the Miami ones,but I cant find a picture of the orange ones.

Offline morethanless

  • Posts: 121
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #138 on: Mon, 20 April 2015, 18:42:44 »
@Nikelu
Here you can see them in a video

https://www.keychatter.com/2015/03/18/video-tai-hao-doubleshot-pbt-keycap-typing-tests/

@all
how thick are they? I've seen the pics from the bottom of the cap, but have nothing to compare them to.
I think they are medium-thick pbt? Thicker than Filco ABS, but thinner than the Vortex or Leopold PBT.
« Last Edit: Mon, 20 April 2015, 18:44:36 by morethanless »

Filco Majestouch 2 Tenkeyless LineaR
(Cherry MX Red)

Offline bcredbottle

  • Posts: 695
  • Location: Seattle, Washington
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #139 on: Mon, 20 April 2015, 18:53:03 »
.
« Last Edit: Wed, 06 October 2021, 13:58:11 by bcredbottle »

Offline morethanless

  • Posts: 121
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #140 on: Mon, 20 April 2015, 19:29:29 »
Yeah they are the same.
And the yellow is too pale for my liking. I'd rather buy the orange set (if they are reasonably thick).

Filco Majestouch 2 Tenkeyless LineaR
(Cherry MX Red)

Offline bcredbottle

  • Posts: 695
  • Location: Seattle, Washington
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #141 on: Mon, 20 April 2015, 20:38:42 »
.
« Last Edit: Wed, 06 October 2021, 13:57:20 by bcredbottle »

Offline ideus

  • * Exalted Elder
  • Posts: 8123
  • Location: In the middle of nowhere.
  • Björkö.
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #142 on: Mon, 20 April 2015, 21:06:24 »
There is no point to use that big fat enter key that takes all that space; maybe, someone may enlight us regarding the "design purpose" of such monstrosity.

Offline Den441

  • Posts: 155
  • Location: AR
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #143 on: Mon, 20 April 2015, 23:06:31 »
I wish they would experiment a little more with the color schemes.  I guess they were trying to make safe picks when selecting them.
Custom Wrist Rests, Artisan Keycaps, and more - http://battlestation.io

Sales Thread - https://geekhack.org/index.php?topic=74835.0

Offline CaplockJack

  • Posts: 97
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #144 on: Fri, 24 April 2015, 17:15:13 »
There is no point to use that big fat enter key that takes all that space; maybe, someone may enlight us regarding the "design purpose" of such monstrosity.

BigAss is a Chinese thing.  Shows wealth.

Offline rjacerden

  • Posts: 1
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #145 on: Tue, 07 June 2016, 08:54:13 »
How can order this keycaps?

Offline seville57

  • Posts: 258
  • Location: Sweden
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #146 on: Tue, 07 June 2016, 15:48:18 »
How can order this keycaps?

Don't know where you live and what keycaps set/s you want to buy but here is 2: https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1170


https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1169




You can find some Tai-Hao sets here also:
https://www.mechanicalkeyboards.co.id/products/filter/col=keycaps


Miami and Sunshine sets are on page 2.



Edit: There is a GB (Group Buy) in this link: http://www.mechsupply.co.uk/product/tai-hao-pbt-sunshine


I have 4 Miami sets and 1 Sunshine set.




A bad old picture with 3 of my 4 Miami sets + my 550 paracord Miami sleeved USB cable (Pexon).






My Ducky One RGB YOTG with a Miami set and 4 different Pumpkin caps.









« Last Edit: Wed, 08 June 2016, 12:13:30 by seville57 »

Offline zephyr11

  • Posts: 56
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #147 on: Wed, 29 June 2016, 21:55:10 »
need to get meself some Miami!!!

looks too good to not own a set.  :eek: :eek: :eek:

Offline BucklingSpring

  • Posts: 1613
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #148 on: Sat, 23 July 2016, 11:17:37 »
Just order a set myself. The color are bright, the print look good but the PBT is paper thin. Kind of disappointed.
A relatively light pressure bends the edge.
The original space bar on my Deck requires at least for times that pressure to get close to that kind of bending.
I know we're not building a bridge with these but still. I was expecting something better.

143175-0
143177-1
« Last Edit: Sat, 23 July 2016, 11:21:52 by BucklingSpring »
In memory of smallfry 1996-2013
Boards I own, click ->
More
Ducky x2 (9008G2 Pro PBT/MX Green and Mini MX Red), Matias x2 (QP and Mini QP Dampened ALPS), Topre RealForce x4 (87U 55g/Digilog case, 103U-UW & 104UG High-Profile x2), Filco Majestouch x2 (TKL MX Blue & V2 AI 104 MX Blue), IBM-M x2 (BS & RD), Unicomp-M x5 (BS black on black x2, BS Ivory x2, QT Ultra-Classic), Deck x4 (Legend MX Black & MX Clear, Hassium & Francium w/ MX Brown), DAS III (MX Blue), KBT Pure Pro 60% (MX Red), NMB-RT8256CW+ x2 (black space invader), XArmor U9BL-S (MX Brown) given for free to someone I hate, CM X2 (Trigger/MX Green + Storm TKL/NovaTouch), TVS GOLD (MX Blue) and a many many more (NMB, DELL, MS, ATT, KeyTronic, Etc...)

Offline ideus

  • * Exalted Elder
  • Posts: 8123
  • Location: In the middle of nowhere.
  • Björkö.
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #149 on: Sat, 23 July 2016, 12:38:36 »
Just order a set myself. The color are bright, the print look good but the PBT is paper thin. Kind of disappointed.
A relatively light pressure bends the edge.
The original space bar on my Deck requires at least for times that pressure to get close to that kind of bending.
I know we're not building a bridge with these but still. I was expecting something better.

(Attachment Link)
(Attachment Link)

I got the temptation to order a set of these, once or twice, I am glad I did not, after your reference: paper thin, and your picture, wow, these are near garbage, I am accustomed to OG Cherry, have a few GMK made key caps, that by the way, are not made equal. We know, GMK have the molds that use to be owned by Cherry, but, they are simple not the same, in any case, thank you very much for taking the time to post this.

Offline ideus

  • * Exalted Elder
  • Posts: 8123
  • Location: In the middle of nowhere.
  • Björkö.
Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
« Reply #150 on: Sat, 23 July 2016, 12:39:51 »
There is no point to use that big fat enter key that takes all that space; maybe, someone may enlight us regarding the "design purpose" of such monstrosity.

BigAss is a Chinese thing.  Shows wealth.

Really? Interesting, some American girls may win the wealthier prize then, LOL.