Author Topic: Keycap manufacturing resources  (Read 34291 times)

0 Members and 1 Guest are viewing this topic.

Offline mkawa

  •  No Marketplace Access
  • Thread Starter
  • Posts: 6562
  • (ツ)@@@. crankypants
Keycap manufacturing resources
« on: Tue, 31 July 2012, 10:10:51 »
Quote
Signature Plastics
switch compatibility: Cherry MX, Alps
materials used: ABS, PBT
capabilities: 2-shot, dye sub, pad printing, laser engrave/infill
key profiles: DCS (most cherry-like)
contact: sales@solutionsinplastic.com

Quote
imsto/KBC
switch compatibility: Cherry MX
materials used: PBT
capabilities: Laser engrave/infill, dye sub
colors: full-color dye sub, several plastic colors
key profiles: Filco/Ducky OEM
contact: vendor forum

Quote
QWERKeys (devlin UK)
switch compatibility: Cherry MX
materials used: ABS, PBT?
capabilities: laser engrave/infill
colors:
key profiles:
contact: vendor forum

Quote
qtan
switch compatibility: Cherry MX
materials used: PBT
capabilities: whole-key dye
key profiles: Filco OEM, Cherry Corp OEM (via KBC?)
colors:
contact: vendor forum

Quote
WASD
switch compatibility: Cherry MX
materials used: ABS
capabilities: Laser engrave/infill
key profiles: Filco/Ducky OEM
colors:
contact: http://www.wasdkeyboards.com, vendor forum

Quote
Unicomp
switch compatibility: Buckling Spring
materials used: PBT
capabilities: dye sub, silkscreen (silkscreen no longer offered)
colors:
key profiles: 2-piece, 1-piece, single profile
contact: support@pckeyboard.com

Quote
Topre
switch compatibility: Topre Capacitive
materials used: PBT
capabilities: dye sublimation
colors: various, check elitekeyboards.com for currently available selection
key profiles: realforce/hhkb OEM
contact: NO CUSTOM ORDERS

Quote
Cherry Corp
switch compatibility: MX, ML, MY, etc.
materials used: ABS
capabilities: 2-shot, dye sub, laser engraving/infill, pad printing
colors: various
key profiles: Cherry OEM, low-profile
contact: NO CUSTOM ORDERS

Quote
Clack Factory
switch compatibility: MX, BS, Topre
materials used: ???
capabilities: SKULLS
colors: various
key profiles: various
contact: MYSTERIOSO
« Last Edit: Sun, 28 October 2012, 09:10:44 by mkawa »

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline boost

  • BOSTMOBILE
  • * Elevated Elder
  • Posts: 3300
  • NY Giants!!!
Re: Keycap manufacturing resources
« Reply #1 on: Tue, 31 July 2012, 10:13:00 »
Nice...Good information

MOAR BARS
"Aerodynamics are for people who can't build engines."

-Enzo Ferrari

Offline Djuzuh

  • Posts: 1127
Re: Keycap manufacturing resources
« Reply #2 on: Tue, 31 July 2012, 15:57:26 »
That's a nice thread.

What would be nice now is to give out what image file/format they expect and/or accept.

Offline tsangan

  • ★★★
  • ** Moderator Emeritus
  • Posts: 2754
  • Location: Clack Factory's Dumpster
  • 1000/600
Re: Keycap manufacturing resources
« Reply #3 on: Tue, 31 July 2012, 16:27:47 »
That's a nice thread.

What would be nice now is to give out what image file/format they expect and/or accept.
Working progress lol
Keyboardless

Offline Dox

  • Posts: 312
Re: Keycap manufacturing resources
« Reply #4 on: Tue, 31 July 2012, 18:08:33 »
Shapeways keycap testing:
980-0982-1984-2986-3
ErgoDox x2 | DoxKB x2 |   IBM SSK   | HHKB pro2

Offline Djuzuh

  • Posts: 1127
Re: Keycap manufacturing resources
« Reply #5 on: Tue, 31 July 2012, 18:11:01 »
How much did you need to pay for one? :o

Also, could you post the cad files you used please?

Offline Dox

  • Posts: 312
Re: Keycap manufacturing resources
« Reply #6 on: Tue, 31 July 2012, 18:22:34 »
How much did you need to pay for one? :o

Also, could you post the cad files you used please?
The transparent one is in "Frosted ultra detail" and it cost 7.72$ but the result is quite good. The white one is in "White strong flexible polished" and cost 2.87$ but the top is not very good, maybe with a bit of sanding it could be better.

You can buy one or download the model here:http://www.shapeways.com/model/637295/keycap.html
ErgoDox x2 | DoxKB x2 |   IBM SSK   | HHKB pro2

Offline Djuzuh

  • Posts: 1127
Re: Keycap manufacturing resources
« Reply #7 on: Tue, 31 July 2012, 18:25:18 »
Thanks !

Offline rknize

  • * Administrator
  • Posts: 1731
  • Location: Chicago
    • metaruss
Re: Keycap manufacturing resources
« Reply #8 on: Tue, 31 July 2012, 19:47:49 »
Shouldn't this be in the wiki?
Russ

fartq

  •  Guest
Re: Keycap manufacturing resources
« Reply #9 on: Tue, 31 July 2012, 21:40:16 »
sure, if someone wants to migrate the information over there, i can change the OP to a link or embed the wiki page in the post (ok i don't know if the latter's really possible, but it should be!!)

Offline KeyboardRookie

  • Posts: 28
  • Location: Ohio, US
Re: Keycap manufacturing resources
« Reply #10 on: Fri, 17 August 2012, 10:09:46 »
Thanks.
Is really helpful.
Does anyone know where we can get custom POM keycaps?
I'm in chronic intoxication to keyboards,

Offline 0100010

  • Posts: 1127
  • Location: DFW, TX, US
  • Not Sure
Re: Keycap manufacturing resources
« Reply #11 on: Tue, 09 October 2012, 20:09:04 »
No Fentek for BS keys?
  Quoting me causes a posting error that you need to ignore.

Offline kmiller8

  • Banned
  •  Post Reporting Timeout
  • Posts: 1589
  • Who is that kmiller8 guy?
Re: Keycap manufacturing resources
« Reply #12 on: Thu, 18 October 2012, 09:36:17 »
Quote
Signature Plastics
switch compatibility: Cherry MX, Alps
materials used: ABS, PBT
capabilities: 2-shot, dye sub, pad printing, laser engrave/infill
key profiles: DCS (most cherry-like)
contact: sales@signatureplastics.com

contact: sales@solutionsinplastic.com

 :)

Offline mkawa

  •  No Marketplace Access
  • Thread Starter
  • Posts: 6562
  • (ツ)@@@. crankypants
Re: Keycap manufacturing resources
« Reply #13 on: Sun, 28 October 2012, 09:08:50 »
fixed!

fentek can mold BS keys?!?!

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline Batmann

  • Posts: 531
  • Location: France
Re: Keycap manufacturing resources
« Reply #14 on: Sun, 28 October 2012, 10:48:10 »
Has any GB ever tried this  manufacturer?
They seem to be doing double shot, dye sub, low profile...

Offline mkawa

  •  No Marketplace Access
  • Thread Starter
  • Posts: 6562
  • (ツ)@@@. crankypants
Re: Keycap manufacturing resources
« Reply #15 on: Sun, 28 October 2012, 18:57:27 »
i'm willing to put money down that they're just reselling signature plastics products

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline 0100010

  • Posts: 1127
  • Location: DFW, TX, US
  • Not Sure
Re: Keycap manufacturing resources
« Reply #16 on: Wed, 31 October 2012, 13:55:16 »
fixed!

fentek can mold BS keys?!?!

I haven't called them or reached out, since so far I have been able to get all the keys I need from Unicomp // but Fenteks site seems to indicate they manufacture BS keys.

http://www.fentek-ind.com/keys.htm - scroll down
  Quoting me causes a posting error that you need to ignore.

Offline nokcha

  • * Vendor
  • Posts: 137
  • www.Keypop.net [키팝.net]
Re: Keycap manufacturing resources
« Reply #17 on: Wed, 31 October 2012, 14:42:51 »
i'm willing to put money down that they're just reselling signature plastics products
I can confirm this.

Offline IvanIvanovich

  • Mr. Silk Underwear
  • Posts: 8199
  • Location: USA
Re: Keycap manufacturing resources
« Reply #18 on: Tue, 27 November 2012, 08:53:29 »
Cherry doubleshots http://www.gmk-electronic-design.de/ Take a look at the MX cylindrical on the examples... 100% Cherry

Also another source for dyesub came up http://www.bspeurope.com/top.html

Both of these were given to me by Cherry employee after inquiring about keycaps.
« Last Edit: Tue, 27 November 2012, 08:55:32 by lysol »

Offline asura

  • Posts: 265
  • Location: Scotland
  • not a duck
Re: Keycap manufacturing resources
« Reply #19 on: Tue, 27 November 2012, 09:05:23 »
Denmark and Germany...

And they come to a point at the bottom rather than being rounded all the way!

Hmmm, wondering if this could be the way forward for Sam/Matt's Elven set...

Offline hashbaz

  • Grand Ancient One
  • * Moderator Emeritus
  • Posts: 5057
  • Location: SF Bae Area
Re: Keycap manufacturing resources
« Reply #20 on: Tue, 27 November 2012, 09:23:43 »
Awesome find lysol.  So is it just cylindricals or do they have something like regular Cherry profile?

Offline absyrd

  • CPT HYPE PADAWAN
  • Posts: 3300
  • Location: Philly Burbs
Re: Keycap manufacturing resources
« Reply #21 on: Tue, 27 November 2012, 09:29:02 »
Cherry doubleshots http://www.gmk-electronic-design.de/ Take a look at the MX cylindrical on the examples... 100% Cherry

Also another source for dyesub came up http://www.bspeurope.com/top.html

Both of these were given to me by Cherry employee after inquiring about keycaps.


Very nice find. And interesting they do windowed and relegendables.
My wife I a also push her button . But now she have her button push by a different men. So I buy a keyboard a mechanicale, she a reliable like a Fiat.

Offline IvanIvanovich

  • Mr. Silk Underwear
  • Posts: 8199
  • Location: USA
Re: Keycap manufacturing resources
« Reply #22 on: Tue, 27 November 2012, 10:51:12 »
Cylindricals is Cherry profile. They are the original maker of Cherry keycap, and maker of WEY keyboards.
« Last Edit: Tue, 27 November 2012, 10:52:45 by lysol »

Offline Peter

  • Posts: 86
Re: Keycap manufacturing resources
« Reply #23 on: Tue, 27 November 2012, 11:01:09 »
Cherry doubleshots http://www.gmk-electronic-design.de/ Take a look at the MX cylindrical on the examples... 100% Cherry

Also another source for dyesub came up http://www.bspeurope.com/top.html

Both of these were given to me by Cherry employee after inquiring about keycaps.


I'm from Denmark ..
This BSP-outfit is just down the road from where I live - Maybe I should go pay them a visit and get some samples ??

Offline IvanIvanovich

  • Mr. Silk Underwear
  • Posts: 8199
  • Location: USA
Re: Keycap manufacturing resources
« Reply #24 on: Tue, 27 November 2012, 11:01:35 »
Please do.

Offline guilleguillaume

  • Posts: 694
Re: Keycap manufacturing resources
« Reply #25 on: Tue, 27 November 2012, 17:05:45 »
Cherry doubleshots http://www.gmk-electronic-design.de/ Take a look at the MX cylindrical on the examples... 100% Cherry

Also another source for dyesub came up http://www.bspeurope.com/top.html

Both of these were given to me by Cherry employee after inquiring about keycaps.


I'm from Denmark ..
This BSP-outfit is just down the road from where I live - Maybe I should go pay them a visit and get some samples ??
This would be great. Let us know something if you go there.

Offline hashbaz

  • Grand Ancient One
  • * Moderator Emeritus
  • Posts: 5057
  • Location: SF Bae Area
Re: Keycap manufacturing resources
« Reply #26 on: Tue, 27 November 2012, 17:07:28 »
Cylindricals is Cherry profile. They are the original maker of Cherry keycap, and maker of WEY keyboards.

Oh, whoops.  I was thinking sphericals.

Offline ishumprod

  • Posts: 138
  • Location: swizerland
Re: Keycap manufacturing resources
« Reply #27 on: Tue, 05 March 2013, 06:15:40 »
are there some 3d files(.str ect) that i can use for making a classic cherry cap ( i mean the ones you can find on a QFR, filco, ect.
home-made TKL rubber dome keyboard !

Offline moonexe

  • Posts: 165
Re: Keycap manufacturing resources
« Reply #28 on: Tue, 28 January 2014, 06:50:02 »
What are the minimum orders with GMK? And has anyone tried BSP yet?

G80-3000, MX brown           -           Filco Majestouch 2 HAKUA TKL+TK, MX brown, JIS Layout

Offline riotonthebay

  • Cherry Peasant
  • * Destiny Supporter
  • Posts: 2048
  • Location: Raleigh, NC
  • keycult.com
Re: Keycap manufacturing resources
« Reply #29 on: Tue, 28 January 2014, 07:54:51 »
GMK minimum used to be 400, but it seems that they've lowered it to 250 on doubleshot keys. I believe blanks are still at 400.

I want to say that BSP is 400 too, but I don't remember where I read that.