GH60 Group Buy (Salvage Mode: Enabled - Update in OP)

[madderoftime]

Like me, for instance, I will be doing just that. Selling what I don't need for just what I have into them when this is over here.

[fydo]

GH60 makes me happy inside. :3

[madderoftime]

Thanks guys! You're bumping up my pageviews count;)
As for prototypes, pcbcart have already amazed me with their speed and making stuff way before the scheduled date, but this time it seems it's not the case. So we're still waiting.

I read through your blog and I must say you have done a amazing job thus far on this. It will truly be worthy of the accessories I have planned for it. Absolute shame you don't see it after it is in the nice case and plate over it.
Might have to make a mirror shadow box for an extra board. 

[vivalarevolución]

So who do I contact regarding my order?

[gnubag]

So who do I contact regarding my order?

depends on what service you need.

[JonasDK]

So when do komar expect the rev C board to arrive?

[gnubag]

So when do komar expect the rev C board to arrive?

as soon as the testing of rev b finished, and he thinks he needs to change quite a bit.

[komar007]

So when do komar expect the rev C board to arrive?

as soon as the testing of rev b finished, and he thinks he needs to change quite a bit.

Quite the contrary. I'm hoping I won't have to change anything except for silkscreen between B and C.
And yes, we have to test B first before we order 700 Cs;)

[vivalarevolución]

So who do I contact regarding my order?

depends on what service you need.

The service I need is a change of shipping address for my order.

[danielucf]

Have plates been made yet or is it possible to change layout?

[jdcarpe]

So who do I contact regarding my order?

depends on what service you need.

The service I need is a change of shipping address for my order.

Just send me a PM with your shipping address, please sir. I am cognizant of the reason for the address change; no explanation required.

Have plates been made yet or is it possible to change layout?

I will let WFD answer that one.

[thoere]

i'm really upset that i missed this. is there likely to be a big markup when people start selling their extra boards? i don't know how these things usually go.

I most likely will be selling parts for 2 GH60s once they arrive. I'll probably just sell them with no markup, depends on demand.

[WhiteFireDragon]

Ok everybody, your orders are ready to ship out.












jk

[meiosis]

My jealousy level just increased

[lcs]

My jealousy level just increased

Same here

Guys, remember that I'll buy your order

[JPG]

Yep, extra pcb (with smd)?  pm me

[Flamingchook]

I'm glad I'm getting two pcb's. Now all I need is a frame for the second one since they're so damn beautiful!

[Dubsgalore]

aw giggity i can't wait

[sth]

yay project time

[CalmB4tehPwn]

I'm always late to the party.

Looks like I'm the only one offering to buy someone's order. Let me know!

[domoaligato]

I'm glad I'm getting two pcb's. Now all I need is a frame for the second one since they're so damn beautiful!

most people when they say frame mean the plate. is this what you mean or are you saying you still need a case?

[nubbinator]

I'm so excited!  Finally get to install my ergo clears.

I see it has the PCB has holes for LEDs.  Is that still something that we'll need a little add-on card thing for later?

[meiosis]

I'm glad I'm getting two pcb's. Now all I need is a frame for the second one since they're so damn beautiful!

most people when they say frame mean the plate. is this what you mean or are you saying you still need a case?

I think he means hes going to hang it up in all its glory.. Which is what I want to do :| so if anyone ordered a bare pcb let me know :!

[domoaligato]

Is it normal for the plate to be cut like that on the mounting hole?

[JPG]

I'm so excited!  Finally get to install my ergo clears.

I see it has the PCB has holes for LEDs.  Is that still something that we'll need a little add-on card thing for later?

The last thing I read about it is that you will have direct asses to some leds with the main controller (wasd and other few) but the others will have  the matrix but will require an addon.

[domoaligato]

I'm so excited!  Finally get to install my ergo clears.

I see it has the PCB has holes for LEDs.  Is that still something that we'll need a little add-on card thing for later?

yes. that is one of the uses for expansion module area at the top of the PCB.

[domoaligato]

I'm so excited!  Finally get to install my ergo clears.

I see it has the PCB has holes for LEDs.  Is that still something that we'll need a little add-on card thing for later?

The last thing I read about it is that you will have direct asses to some leds with the main controller (wasd and other few) but the others will have  the matrix but will require an addon.

you are correct. the area labeled wasd is a good example of this as each of the resisters for the led's go in each of the w.a.s.d. labeled areas.

[madderoftime]

So revision B made the cut with no changes? Good job!

[Acetrak]

Whoa great news!

[gnubag]

edited: nvm

anyway the white pcb looks so goooood
I wouldn't mind to get a white one instead of black ones.

[esoomenona]

That white PCB is beautiful... I might have to work one without a plate.

[acantha]

wow. that is seriously gorgeous. excited!

[MOZ]

Jesus Christ, that is beautiful!

[domoaligato]

I love the red alert style pcb. Very awesome!

[eyesmiles]

That white PCB is beautiful... I might have to work one without a plate.

I wholeheartedly agree moose. I think I'll go PCB mount everything for my second one. Perhaps I'll cut a hole behind a stock Poker case and make a window so I can see the ode to SmallFry and the GH60 logo. The PCB looks too exceptional to hide behind a plate.

[domoaligato]

That white PCB is beautiful... I might have to work one without a plate.

I wholeheartedly agree moose. I think I'll go PCB mount everything for my second one. Perhaps I'll cut a hole behind a stock Poker case and make a window so I can see the ode to SmallFry and the GH60 logo. The PCB looks too exceptional to hide behind a plate.

Or you could get a clear acrylic case.

[damorgue]

Those plates do look a bit unconventional regarding the holes at the sides. PCB looks great though.

[naokira]

Damn! Those are hot! Wish I ordered Though I will hunt classifieds! muahhahaha!

[ApocalypseMaow]

Ok everybody, your orders are ready to ship out.

Show Image

Show Image

jk

  )

It's not really gonna be white... Is it? Looks great with the red and gold!!!

[ApocalypseMaow]

Show Image

Is it normal for the plate to be cut like that on the mounting hole?

That is the universal plate Domo. You can run any setup with those (minus ISO, unless you got a Uni ISO).

[tradet]

If we've ordered switches from 7bit over at deskthority, how do we get those delivered?

[gnubag]

If we've ordered switches from 7bit over at deskthority, how do we get those delivered?

since the distribution of the pcb/plate gp through jdcarpe/wfd or komar and you would get it with the plates from them in a package I would guess. (if you told 7bit to ship the switches for the GH60 project)

[domoaligato]

Show Image

Is it normal for the plate to be cut like that on the mounting hole?

That is the universal plate Domo. You can run any setup with those (minus ISO, unless you got a Uni ISO).

I know that it is the universal plate.
I was trying to point out that the upper left corner of the right shift is cut where the mounting hole is.
it is hanging in mid air. I know that it is thick steel and can take the flex of being used.
it just looks odd.

[komar007]

Guys, how do you like the white PCB?
Are we producing the final order white or going back to black matte, as rev A?

[nubbinator]

White PCB all the way.

[Paranoid]

Oh wow, that is just gorgeous! I can't believe how smoothly this went in comparison to the Phantom GB, which seems to be neverending.
I'm glad I ordered some extra stabilizers here as well since I'll never see those from Prof.
Thanks for all the hard work guys! I'm sure everybody appreciates this

[Flamingchook]

Guys, how do you like the white PCB?
Are we producing the final order white or going back to black matte, as rev A?

I absolutely adore the white PCB! It's so pretty! <3

I'm glad I'm getting two pcb's. Now all I need is a frame for the second one since they're so damn beautiful!

most people when they say frame mean the plate. is this what you mean or are you saying you still need a case?

I mean I want to hang it on my wall because of how amazing it looks!

[gnubag]

Guys, how do you like the white PCB?
Are we producing the final order white or going back to black matte, as rev A?

i would like to have both versions to be honest.

[domoaligato]

Guys, how do you like the white PCB?
Are we producing the final order white or going back to black matte, as rev A?

I love the white but I wonder if a poll might be better? leave it open a few days?

[vorn]

Guys, how do you like the white PCB?
Are we producing the final order white or going back to black matte, as rev A?

I love the white but I wonder if a poll might be better? leave it open a few days?

+1