Author Topic: [IC] Whi65 | VENDORS ANNOUNCED | (7/22/2021 Update)  (Read 43582 times)

0 Members and 1 Guest are viewing this topic.

Offline adsfqwer

  • Posts: 29
Re: [IC] Whi65 - Gasket Mount | PROTOTYPE PICS ADDED (5/11/2021 Update)
« Reply #50 on: Thu, 27 May 2021, 20:28:25 »
I hope this works out and you keep making boards. I personally would love to see a TKL board with this design language.

Offline Ranger_Trivette

  • Posts: 90
  • Location: Italy
Re: [IC] Whi65 - Gasket Mount | PROTOTYPE PICS ADDED (5/11/2021 Update)
« Reply #51 on: Fri, 28 May 2021, 02:12:37 »
with a magikarp badge would be perfect  :p

Offline billy.types

  • Thread Starter
  • Posts: 21
Re: [IC] Whi65 - Gasket Mount | PROTOTYPE PICS ADDED (5/11/2021 Update)
« Reply #52 on: Sat, 29 May 2021, 12:58:46 »
Hi everyone, it has been a while since our last update. Nothing much has happened since then we have just been waiting for the PCBs to be delivered so we that we can start building the board, there was some sort of delay at the manufacturer's end.

However, the good news is that they were able to finish the PCBs last week and were able to deliver it a few days ago. The PCBs themselves are looking very clean, really happy with how they turned out. The mill-max hot-swap sockets and the silk screen print came out really nice as-well. I have attached a few pictures show it off, the PCB finish and silkscreen art are not final yet, we will be changing that for our production units. This is just something we had put together for the prototypes, just to gauge the print quality but for the final PCBs we are working on a special art piece for that. We will keep everyone updated as figure that out.

Over the past few days we have been able to put together a QMK firmware for our board and flash it. We tested the PCB and the hot-swap sockets and everything seems to working well, which is great to see. We teased a little sound test on our Instagram page (https://www.instagram.com/stories/highlights/17898552104019054/) and currently are working on getting some sound tests done soon.

So stay tuned for that, I also just wanted to say a huge thank you to everyone for their comments, constructive feedback and support. We really appreciate it :)




« Last Edit: Sat, 29 May 2021, 13:05:10 by billy.types »

Offline billy.types

  • Thread Starter
  • Posts: 21
Re: [IC] Whi65 - Gasket Mount | PROTOTYPE PICS ADDED (5/11/2021 Update)
« Reply #53 on: Mon, 31 May 2021, 15:38:12 »
with a magikarp badge would be perfect  :p

LOL I agree that would be so sweet, unfortunately not sure how the folks at Pokemon would feel :p

Offline billy.types

  • Thread Starter
  • Posts: 21
Hi everyone, we just posted our initial sound test for the Whi65 R1 prototypes.

Check it out here:

Board Config:
  • Plate: Frosted polycarbonate
  • Switches: Alpaca V2 Linear lubed with 205g0 and filmed with Deskeys
  • Stabilizers: Durock V2 stabilizers lubed with 205g0, XHT BDZ on wires, and holee modded
  • Foam: None

Offline Neely_12

  • Posts: 136
  • Location: US
Re: [IC] Whi65 | PROTOTYPES BUILT - SOUND TEST POSTED!! (6/15/2021 Update)
« Reply #55 on: Tue, 15 June 2021, 12:20:36 »
This actually looks really nice. The design is clean and elegent. Not really a fan of 65% but idk this is nice

Offline Brankir

  • Posts: 5
Re: [IC] Whi65 | PROTOTYPES BUILT - SOUND TEST POSTED!! (6/15/2021 Update)
« Reply #56 on: Wed, 16 June 2021, 14:24:42 »
Iím so glad I found this! That E-lilac is all that Iíve been wishing for. Please keep that and Iíll buy it no matter what! It is absolutely gorgeous! And I love the weight and brass design.. great job. This has made me really excited for this board.

Offline tjx7

  • Posts: 1
  • Location: Sydney, Australia
    • Twitch
Re: [IC] Whi65 by 383 Boards, Gasket Mount Keyboard Kit
« Reply #57 on: Mon, 28 June 2021, 01:34:24 »
1. I don't like this screwless implementation because of the small screws you are forced to use (usually they are ****ty and low quality, usually)
2. you might not be able to screw the top few screws with JWK switches, definitely not with Gat Inks (eye-balling off render)
3. that front-height is yikes, will probably be hard to use especially with a 7į typing angle as well
4. why so much foam? whats the point of muting everything? why isolate the plate?
5. total mass? mass of weight?
6. approximate price?
7. A 65% gasket mounted keyboard Another 65% gasket mounted keyboard *with blocker
8 at least the design is somewhat different (definitely been done before though) and its not a top right blocker
9. you sneaky mother****er, this **** is hotswap. you added standoff cutouts on the plate so this is just noob-bait (65%, gasket mount, hotswap, blocker, foam, foam, and more foam)
10. also it only has 4 standoffs? good luck?

personally, I don't think 6 months is enough time. Maybe I'm wrong, who knows. I'm just some random dude on the internet, take this with a grain of salt

grr how dare it be beginner friendly by being hotswap!11!!1 maybe some of us don't know how to solder/ cant afford a solder iron + the gear/ hotswap is easier/ some of us prefer hotswap? hotswap = noob am i right guys

Offline gotgoodiez

  • Posts: 6
  • Location: USA
Re: [IC] Whi65 | PROTOTYPES BUILT - SOUND TEST POSTED!! (6/15/2021 Update)
« Reply #58 on: Thu, 01 July 2021, 20:20:47 »
Any updates on new sound tests with different material? Also do you guys plan on going through another round of protos before a gb?

Offline billy.types

  • Thread Starter
  • Posts: 21
Re: [IC] Whi65 | PROTOTYPES BUILT - SOUND TEST POSTED!! (6/15/2021 Update)
« Reply #59 on: Thu, 01 July 2021, 21:38:11 »
Any updates on new sound tests with different material? Also do you guys plan on going through another round of protos before a gb?

We had some small minor changes we wanted to make and thus we def are working on getting a second round of prototypes done before we finalize things for the GB. As for sound tests when we have our second round prototypes we will make sure to do 3 or 4 sound tests with different plate materials and foam options.

Offline eggydesu

  • Posts: 1
  • Location: Guam, USA
Re: [IC] Whi65 | PROTOTYPES BUILT - SOUND TEST POSTED!! (6/15/2021 Update)
« Reply #60 on: Fri, 02 July 2021, 23:13:04 »
I'm really hoping this GB happens and that it is unlimited.
I don't think I've ever wanted a board so badly

Offline legendaky

  • Posts: 1
Re: [IC] Whi65 | PROTOTYPES BUILT - SOUND TEST POSTED!! (6/15/2021 Update)
« Reply #61 on: Mon, 12 July 2021, 14:38:16 »
Would you consider a green colorway?

Offline ralukiii03

  • Posts: 1
Re: [IC] Whi65 | PROTOTYPES BUILT - SOUND TEST POSTED!! (6/15/2021 Update)
« Reply #62 on: Mon, 12 July 2021, 18:04:26 »
really love the look of this keyboard and i am highly considering getting one. i think if a rose gold colour way would be available would look amazinf

Offline billy.types

  • Thread Starter
  • Posts: 21
Re: [IC] Whi65 | PROTOTYPES BUILT - SOUND TEST POSTED!! (6/15/2021 Update)
« Reply #63 on: Thu, 22 July 2021, 20:54:01 »
We would like to officially like to announce our vendor partners for the upcoming Whi65 group buy. Its an honor to be working with such established companies in the keyboard space. We are beyond excited to see our designs come into fruition and this is just one of the steps in that direction.

USA - Space Cables
CA - Ashkeebs
EU - Mykeyboard
UK - Proto[Typist]
SEA - Zion Studios
AUS - DailyClack

More details about the group buy to follow soon. Thanks!

Offline billy.types

  • Thread Starter
  • Posts: 21
Re: [IC] Whi65 | VENDORS ANNOUNCED | (7/22/2021 Update)
« Reply #64 on: Sun, 25 July 2021, 14:45:09 »
Forgot to make this update, so adding it now:

After testing the Whi65 out and using it as a daily driver we found a few things that we didn't quite like and thus we wanted to make some tweaks before we went into our second prototype run.

The changes we have made are the following:

- gasket strips have been made wider going from 2.5mm to 4mm to allow for easy application
- the space between the PCB and bottom case has been increased from 1mm to 2.5mm, to give more room for the board to flex without bottoming out
- screws were added to the mid spacer to allow for an easier assembly
- switched from Phillips M1.2 screws to Torx M2 screws to give more durability
- plates were updated to add "leaf spring" type cuts around the edges to allow for easier flex



- the weight's mounting design had to be updated to accommodate for the above changes




Offline mr_foggy

  • Posts: 115
Re: [IC] Whi65 | VENDORS ANNOUNCED | (7/22/2021 Update)
« Reply #65 on: Mon, 26 July 2021, 04:40:26 »
this will be my last 65%. please make it unlimited.

Offline bert039

  • Posts: 37
Re: [IC] Whi65 | VENDORS ANNOUNCED | (7/22/2021 Update)
« Reply #66 on: Tue, 27 July 2021, 15:24:49 »
I love this too!! Hope it's an unlimited gb, gorgeous board

Offline bert039

  • Posts: 37
Re: [IC] Whi65 | VENDORS ANNOUNCED | (7/22/2021 Update)
« Reply #67 on: Tue, 27 July 2021, 21:13:06 »
Ah crap, just read that the board is named after Toronto raptors kawhi. As a Warriors fan I'm really conflicted now  :-\

Offline HidenLotus

  • Posts: 1
Re: [IC] Whi65 | VENDORS ANNOUNCED | (7/22/2021 Update)
« Reply #68 on: Wed, 28 July 2021, 08:57:27 »
Just an opinion post nothing crazy.

I love the design of this board, I'll probably pick it up, but a few things bug me.

1. Typing angle (which you've addressed)
2. I don't think a badge is necessary. I'd rather have the extra 2 keys . The board design speaks for itself imo, I wish that functionality wasn't reduced. Just a preference. The badge itself looks nice
3. I LOVE the weight at the back and think it adds a lot of personality, but I think the circle should just be complete from a design perspective.

Looking forward to some of the changes you've made and looking forward to more sound tests! Colourways are sleek. I'm gonna go for the blue and gold.