All of my molds have the image on the top of the cap face down... gravity does some cool things.
Here is the top of the leftover resin from this batch,
Here is the bottom,
When under pressure there is a lot less movement... I can tell because have some of the keys out of the molds. Only one out of the 10 didn't make it. Some of the caps have more silver than others which is a problem caused by mixing so much silver in with a larger resin batch.
Pics to come after the keys completely set. The addition of metal powder inhibited the reaction some bit, but it will harden completely in about 2 more hours.
NOTE: I had put these molds in the pressure pot at 1 AM, it is now 4:18 AM and the caps are not yet 100% solid. This is from a 90 minute cure resin. Factors increasing time-- temperature of 40F in the basement & metal powder. 90 minutes turns into 6 hour cure time in these conditions. Full cure with final pigment in probably 10-12 hours.