Author Topic: Price Check- What's it Worth?  (Read 1446745 times)

0 Members and 3 Guests are viewing this topic.

Offline whiskytango

  • Trade Count: (0)
  • Posts: 576
  • Location: Birmingham, Alabama
  • Don't touch the trim
Re: Price Check- What's it Worth?
« Reply #700 on: Wed, 27 February 2013, 20:49:15 »
87 brown switches desoldered from a QFR

What is the market price do you think?
I stay busy with work and family these days, but I'm still around, lurking.

Offline brighenne

  • Trade Count: (0)
  • Posts: 256
  • Location: Long Beach, CA
Re: Price Check- What's it Worth?
« Reply #701 on: Thu, 28 February 2013, 01:16:43 »
Stock Filco TKL Case?

Starcraft doubleshot esc caps?

Offline calavera

  • Trade Count: (0)
  • Posts: 1713
  • Location: South Korea
Re: Price Check- What's it Worth?
« Reply #702 on: Thu, 28 February 2013, 01:27:17 »
1. NCR double shot  ansi winkeyless set. condition used.

2. original cherry dye sub ansi winkeyless set. condition used, enter key faded.

3. double shot white/beige ansi winkeyless set. NIB

Offline phx

  • Trade Count: (0)
  • Posts: 361
  • Location: Boston, Massachusetts
Re: Price Check- What's it Worth?
« Reply #703 on: Thu, 28 February 2013, 10:08:46 »
Realforce 45g uniform?


Offline SmallFry

  • ** Moderator Emeritus
  • Trade Count: (0)
  • Posts: 3887
  • Location: Wisconsin, USA
  • Leaving 6/15; returning 6/22 or so.
Re: Price Check- What's it Worth?
« Reply #704 on: Thu, 28 February 2013, 10:43:45 »
Graphite set with 1.5 bottom mods and a 7x spacebar?
Didn't a set just go for about $125? I don't recall.
Price for an industrial grey model M 104? No rattling rivets  ;D

1990+ model I think, need to check it when I get home.

And a SSK with no rattling rivets too....
I'd say $150 to $200 on both of them.
87 brown switches desoldered from a QFR

What is the market price do you think?
I'd say the market value on them would be about $30. Puts them at just a hair over $.34 a piece
Stock Filco TKL Case?

Starcraft doubleshot esc caps?
I'd say about $20-$30 on the Filco case, as people are looking for them for their Phantoms.
1. NCR double shot  ansi winkeyless set. condition used.

2. original cherry dye sub ansi winkeyless set. condition used, enter key faded.

3. double shot white/beige ansi winkeyless set. NIB
1. NCR set is dye sub also, no? If so, I'd put a current value of $100 to $150 on it, if not more.
2. Dye sub set probably arround $125 considering the faded enter, though you could easily fill it with a Desko enter (since most people don't want those)
3. Double shots could probably fetch you ~$50 or so.
Realforce 45g uniform?
I'd say about $200 or $225 considering the price that they sell for on EK, when they are in stock that is.

Offline IvanIvanovich

  • Mr. Silk Underwear
  • Trade Count: (0)
  • Posts: 8199
  • Location: USA
Re: Price Check- What's it Worth?
« Reply #705 on: Thu, 28 February 2013, 13:23:49 »
No, NCR Cherry doubleshot have similar colorway to Goupil with industrial grey on white/biege. Depend on condition how used up to $90
For Cherry dyesubs the bottom will be dropping out on those soon too now that we can get them from BSP for sure for about $75 set new. So I would just stop overvaluing them now.
NIB black on white/beige $85 for 3000 set, $50 for 1800 set since you didn't say.

Offline phx

  • Trade Count: (0)
  • Posts: 361
  • Location: Boston, Massachusetts
Re: Price Check- What's it Worth?
« Reply #706 on: Thu, 28 February 2013, 13:37:46 »
Quote
Realforce 45g uniform?
I'd say about $200 or $225 considering the price that they sell for on EK, when they are in stock that is.
http://elitekeyboards.com/products.php?sub=topre_keyboards,rftenkeyless&pid=rf_se0900
it's $280 on EK, I've heard due to the high demand people sell them for 300-400. I'm wondering if that price has dropped yet.

Offline AKIMbO

  • HHKBro
  • Trade Count: (0)
  • Posts: 1778
  • Location: Tennessee
  • Know Topre, Know Peace. No Topre, No Peace.
Re: Price Check- What's it Worth?
« Reply #707 on: Thu, 28 February 2013, 13:40:04 »
Realforce 45g uniform?



$230 shipped...if it's in good condition still.  EK is out of stock on the 45g uniform right now, so I'd expect a fairly quick sell in the classifieds.
Mkawa Beta SSK | IBM SSK | IBM Model AT F | IBM F 122 | IBM Unsaver | LZ-GH (62g ergo clears) | HHKB Pro2 Type-S | HHKB Pro2 | Realforce 87U-Silent (55g uniform) | Leopold FC660C | Omnikey 101 (blue alps) | Kingsaver (blue alps) | Zenith ZKB2 (green alps)
| KBD75 (box reds)

Offline phx

  • Trade Count: (0)
  • Posts: 361
  • Location: Boston, Massachusetts
Re: Price Check- What's it Worth?
« Reply #708 on: Thu, 28 February 2013, 13:45:37 »
Realforce 45g uniform?
$230 shipped...if it's in good condition still.  EK is out of stock on the 45g uniform right now, so I'd expect a fairly quick sell in the classifieds.

I was actually thinking of buying one, just wondering about the price people sell for at around here

Offline Jocelyn

  • Trade Count: (0)
  • Posts: 1608
  • Location: Orlando, FL
  • 조셀린
Re: Price Check- What's it Worth?
« Reply #709 on: Thu, 28 February 2013, 13:49:46 »
I was actually thinking of buying one, just wondering about the price people sell for at around here

That's a very good way to use this thread :)

Edit: How much would a set of Cherry plate mounted stabilizers go for?
« Last Edit: Thu, 28 February 2013, 15:34:15 by Jocelyn »

Offline SmallFry

  • ** Moderator Emeritus
  • Trade Count: (0)
  • Posts: 3887
  • Location: Wisconsin, USA
  • Leaving 6/15; returning 6/22 or so.
Re: Price Check- What's it Worth?
« Reply #710 on: Thu, 28 February 2013, 16:40:43 »
$5 check WhiskeyTango's thread Jocelyn. :)

Offline Halverson

  • Traitor Supreme
  • Trade Count: (3)
  • Posts: 6770
  • GIRLSHARK WIZBRO
Re: Price Check- What's it Worth?
« Reply #711 on: Thu, 28 February 2013, 16:44:56 »
I was actually thinking of buying one, just wondering about the price people sell for at around here

That's a very good way to use this thread :)

Edit: How much would a set of Cherry plate mounted stabilizers go for?

Is there a difference between plate and pcb mount stabs?

Offline The_Beast

  • * Maker
  • Trade Count: (0)
  • Posts: 3964
  • Location: Wisconsin
  • I like wood ಠ_๏
Re: Price Check- What's it Worth?
« Reply #712 on: Thu, 28 February 2013, 16:46:53 »
I was actually thinking of buying one, just wondering about the price people sell for at around here

That's a very good way to use this thread :)

Edit: How much would a set of Cherry plate mounted stabilizers go for?

Is there a difference between plate and pcb mount stabs?

Yes. One mounts only on a plate and the other on a PCB that has holes to support PCB mount cherry stabilizers
Vendor Status: Sadly, not taking any orders/pre-orders at this time

Vendor Quick Links: | Vendor Forum | Hardwood Wrist Rests | Hardwood 60% Cases | Customer Gallery | Giveaway |

Offline Halverson

  • Traitor Supreme
  • Trade Count: (3)
  • Posts: 6770
  • GIRLSHARK WIZBRO
Re: Price Check- What's it Worth?
« Reply #713 on: Thu, 28 February 2013, 16:51:38 »
I was actually thinking of buying one, just wondering about the price people sell for at around here

That's a very good way to use this thread :)

Edit: How much would a set of Cherry plate mounted stabilizers go for?

Is there a difference between plate and pcb mount stabs?

Yes. One mounts only on a plate and the other on a PCB that has holes to support PCB mount cherry stabilizers

Hmmm. Guess I've never opened up my plate boards to check. Always just figured the pcb had holes for stabs plate or not.

Offline The_Beast

  • * Maker
  • Trade Count: (0)
  • Posts: 3964
  • Location: Wisconsin
  • I like wood ಠ_๏
Re: Price Check- What's it Worth?
« Reply #714 on: Thu, 28 February 2013, 16:52:39 »
I'm pretty sure that he phantom is plate mount only in terms of stabs
Vendor Status: Sadly, not taking any orders/pre-orders at this time

Vendor Quick Links: | Vendor Forum | Hardwood Wrist Rests | Hardwood 60% Cases | Customer Gallery | Giveaway |

Offline Jocelyn

  • Trade Count: (0)
  • Posts: 1608
  • Location: Orlando, FL
  • 조셀린
Re: Price Check- What's it Worth?
« Reply #715 on: Thu, 28 February 2013, 16:58:02 »
$5 check WhiskeyTango's thread Jocelyn. :)
Thank you! A certain "someone" (Starts with W lol) is giving me a set and I wanted to pay him for them.

Is there a difference between plate and pcb mount stabs?

I thought the exact same thing until I was offered a set. Initially I thought they had meant Costar stabs, but I was quickly informed :P
I think they look like this?


Offline Halverson

  • Traitor Supreme
  • Trade Count: (3)
  • Posts: 6770
  • GIRLSHARK WIZBRO
Re: Price Check- What's it Worth?
« Reply #716 on: Thu, 28 February 2013, 17:06:07 »
Oh wow! Even on my plate mounted boards they don't use those. they just have the holes cut in the plate for pcb mount.

Offline jdcarpe

  • * Curator
  • Trade Count: (1)
  • Posts: 8856
  • Location: Odessa, TX
  • Live long, and prosper.
Re: Price Check- What's it Worth?
« Reply #717 on: Thu, 28 February 2013, 17:11:13 »
I much prefer Cherry plate mounted stabilizers to PCB mounted stabilizers. You don't pull them out of the holes when you pull keycaps off.

I get all my Cherry plate stabs from old WYSE boards. They were probably the leading user of them. :)
« Last Edit: Thu, 28 February 2013, 17:20:04 by jdcarpe »
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline Mugen

  • Trade Count: (0)
  • Posts: 151
  • Location: NYC
  • O-Rings are the murderers of keyboard souls
Re: Price Check- What's it Worth?
« Reply #718 on: Fri, 01 March 2013, 07:39:32 »

Offline CPTBadAss

  • Woke up like this
  • Trade Count: (0)
  • Posts: 14305
  • Location: CT, USA
  • Rich Homie Huang.
Re: Price Check- What's it Worth?
« Reply #719 on: Fri, 01 March 2013, 07:48:37 »
Looking for a price check on the following items:
Clack Sticky - http://imageshack.us/a/img15/3241/dsc0432ss.jpg
Clack Sticky Icky - http://imageshack.us/a/img41/1149/dsc0439wj.jpg
Clack Sticky Icky Icky - http://imageshack.us/a/img26/8413/dsc0438lm.jpg
Clack Good Times - http://imageshack.us/a/img443/7923/dsc0437yx.jpg
Clack Blank Esc Key - http://img838.imageshack.us/img838/9215/dsc0423m.jpg
Thanks!

Second hand Clack skulls and blanks seem to go for ~$100. I don't think I've ever seen any of the 420 caps for sale, only trade. You can check the thread in my signature for more pricing info.
Please check out TactileZine.com!

Offline SmallFry

  • ** Moderator Emeritus
  • Trade Count: (0)
  • Posts: 3887
  • Location: Wisconsin, USA
  • Leaving 6/15; returning 6/22 or so.
Re: Price Check- What's it Worth?
« Reply #720 on: Fri, 01 March 2013, 08:19:21 »
Looking for a price check on the following items:
Clack Sticky - http://imageshack.us/a/img15/3241/dsc0432ss.jpg
Clack Sticky Icky - http://imageshack.us/a/img41/1149/dsc0439wj.jpg
Clack Sticky Icky Icky - http://imageshack.us/a/img26/8413/dsc0438lm.jpg
Clack Good Times - http://imageshack.us/a/img443/7923/dsc0437yx.jpg
Clack Blank Esc Key - http://img838.imageshack.us/img838/9215/dsc0423m.jpg
Thanks!
Also, could you take pics for the wiki? Check the calling all clack owners in my signature. :D

Offline Mugen

  • Trade Count: (0)
  • Posts: 151
  • Location: NYC
  • O-Rings are the murderers of keyboard souls
Re: Price Check- What's it Worth?
« Reply #721 on: Fri, 01 March 2013, 09:32:14 »
Sure, i'll take some pics and post them.
SF, how much would you pay for each?

Offline SmallFry

  • ** Moderator Emeritus
  • Trade Count: (0)
  • Posts: 3887
  • Location: Wisconsin, USA
  • Leaving 6/15; returning 6/22 or so.
Re: Price Check- What's it Worth?
« Reply #722 on: Fri, 01 March 2013, 09:51:01 »
Its not SF if you may, but I'd say each could bring about $50 to $100. I usually try and stay out of the pricing of Clacks though. I just collect the pretty pictures. :P

Offline Acetrak

  • ssk.ℜ
  • Trade Count: (0)
  • Posts: 1079
  • Location: East
  • [Ctrl][Alt][Fn`]
Re: Price Check- What's it Worth?
« Reply #723 on: Fri, 01 March 2013, 09:57:14 »
If not SF how about SmallF or SFry or SmFr :P
(ノ◕ヮ◕)ノ*:・゚✧ HHKB 55g Type-S | LZGH 65g Blues | IBM SSKawa

Offline SmallFry

  • ** Moderator Emeritus
  • Trade Count: (0)
  • Posts: 3887
  • Location: Wisconsin, USA
  • Leaving 6/15; returning 6/22 or so.
Re: Price Check- What's it Worth?
« Reply #724 on: Fri, 01 March 2013, 09:58:21 »
Fryman. Or TechDawg NateDawg:P

Offline The_Ed

  • Trade Count: (0)
  • Posts: 1350
  • Location: MN - USA
  • Asperger's... SQUIRREL! I'm Anal Retentive *****!
Re: Price Check- What's it Worth?
« Reply #725 on: Fri, 01 March 2013, 12:49:04 »
Frylock it is then.
Reaper "frelled" me... Twice... Did he "frell" you too?... *brohug*
I'm camping for a week, and moving twice in a month. I'll get back to you when I can (If I don't then just send me another PM).
R.I.P.ster

Offline jdcarpe

  • * Curator
  • Trade Count: (1)
  • Posts: 8856
  • Location: Odessa, TX
  • Live long, and prosper.
Re: Price Check- What's it Worth?
« Reply #726 on: Fri, 01 March 2013, 13:47:56 »
I got sad for a minute. You made me think about Nate Dogg. R.I.P. :'(
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline SmallFry

  • ** Moderator Emeritus
  • Trade Count: (0)
  • Posts: 3887
  • Location: Wisconsin, USA
  • Leaving 6/15; returning 6/22 or so.
Re: Price Check- What's it Worth?
« Reply #727 on: Fri, 01 March 2013, 13:50:15 »
That's what I get called at school. I don't look like the actual Nate Dogg at all. :P

Offline jdcarpe

  • * Curator
  • Trade Count: (1)
  • Posts: 8856
  • Location: Odessa, TX
  • Live long, and prosper.
Re: Price Check- What's it Worth?
« Reply #728 on: Fri, 01 March 2013, 15:57:12 »
What is the going rate for keyboard mods?

I just started offering my services to a couple people, and I'm not sure what to charge. I tend to err on the low side, when in doubt, but I don't want to undervalue what I'm doing. I know that smaller boards should cost less, so 104 > 87 > 61.

I guess the common things are switch swaps, lubing, assembly, LEDs, etc.
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline SmallFry

  • ** Moderator Emeritus
  • Trade Count: (0)
  • Posts: 3887
  • Location: Wisconsin, USA
  • Leaving 6/15; returning 6/22 or so.
Re: Price Check- What's it Worth?
« Reply #729 on: Fri, 01 March 2013, 16:11:47 »
I do a general charge of $35 or $45 depending on how tight my schedule is, I don't pay for shipping or parts though. That's all on them.

Offline davkol

  •  Post Editing Timeout
  • Trade Count: (0)
  • Posts: 4994
Re: Price Check- What's it Worth?
« Reply #730 on: Sat, 02 March 2013, 07:38:43 »
I was wondering, how much is a Chicony KB-5191 worth? It's NIB, with Cherry MX Blue switches (not clones), and US+cyrillic dye-sublimated keycaps. Pictures. How much are the keycaps worth? Thanks!

Offline IvanIvanovich

  • Mr. Silk Underwear
  • Trade Count: (0)
  • Posts: 8199
  • Location: USA
Re: Price Check- What's it Worth?
« Reply #731 on: Sat, 02 March 2013, 09:04:11 »
I would say $40-50 maybe for whole board, maybe $20 for the keycap only as I am pretty sure they are pad printed not dyesub.

Offline davkol

  •  Post Editing Timeout
  • Trade Count: (0)
  • Posts: 4994
Re: Price Check- What's it Worth?
« Reply #732 on: Sat, 02 March 2013, 09:38:55 »
Thanks. You're right, it appeared to be dyesub at first sight, but upon further inspection it looks like quite nice pad printing.

Offline Mugen

  • Trade Count: (0)
  • Posts: 151
  • Location: NYC
  • O-Rings are the murderers of keyboard souls
Re: Price Check- What's it Worth?
« Reply #733 on: Mon, 04 March 2013, 12:51:14 »
Looking for a price check on a mint blank CC escape key - anybody?
« Last Edit: Mon, 04 March 2013, 12:55:11 by Mugen »

Offline boost

  • BOSTMOBILE
  • * Elevated Elder
  • Trade Count: (0)
  • Posts: 3285
  • NY Giants!!!
Re: Price Check- What's it Worth?
« Reply #734 on: Mon, 04 March 2013, 13:04:48 »
Looking for a price check on a mint blank CC escape key - anybody?

Is it topre or MX?

I would say $50-$100 in today's market -_-
"Aerodynamics are for people who can't build engines."

-Enzo Ferrari

Offline Mugen

  • Trade Count: (0)
  • Posts: 151
  • Location: NYC
  • O-Rings are the murderers of keyboard souls
Re: Price Check- What's it Worth?
« Reply #735 on: Mon, 04 March 2013, 13:07:10 »
Its MX, Topre would be on the more expensive side of that scale correct?
boost, if i've got your attention, what do you think a Sticky Icky and a Sticky Icky Icky would be worth?
« Last Edit: Mon, 04 March 2013, 13:10:28 by Mugen »

Offline Turbo Slaab

  • Trade Count: (0)
  • Posts: 798
  • Location: NY
Re: Price Check- What's it Worth?
« Reply #736 on: Mon, 04 March 2013, 13:14:22 »
Its MX, Topre would be on the more expensive side of that scale correct?
boost, if i've got your attention, what do you think a Sticky Icky and a Sticky Icky Icky would be worth?

It's usually the other way around. Many more people have MX.
My WTB/WTT Thread!
Looking for CC's!

Offline Mugen

  • Trade Count: (0)
  • Posts: 151
  • Location: NYC
  • O-Rings are the murderers of keyboard souls
Re: Price Check- What's it Worth?
« Reply #737 on: Mon, 04 March 2013, 20:47:33 »
Anybody ideas on the Sticky Icky and Sticky Icky Icky as well as the blank CC? >_<

Offline ishumprod

  • Trade Count: (0)
  • Posts: 138
  • Location: swizerland
Re: Price Check- What's it Worth?
« Reply #738 on: Tue, 05 March 2013, 04:13:30 »
i don't know if anyone here knows the value of Nixie tubes ?




i have a dozen of those and on ebay their price goes from nothing to 50 bucks one tube, so if you can tell me their actual price i'd like to know
home-made TKL rubber dome keyboard !

Offline The_Ed

  • Trade Count: (0)
  • Posts: 1350
  • Location: MN - USA
  • Asperger's... SQUIRREL! I'm Anal Retentive *****!
Re: Price Check- What's it Worth?
« Reply #739 on: Tue, 05 March 2013, 04:29:10 »
There are thousands of kinds of nixie tubes... What is their model number?
Reaper "frelled" me... Twice... Did he "frell" you too?... *brohug*
I'm camping for a week, and moving twice in a month. I'll get back to you when I can (If I don't then just send me another PM).
R.I.P.ster

Offline ishumprod

  • Trade Count: (0)
  • Posts: 138
  • Location: swizerland
Re: Price Check- What's it Worth?
« Reply #740 on: Tue, 05 March 2013, 04:36:40 »
 side one of the tube = NEC LD-911

other side = 43 424
home-made TKL rubber dome keyboard !

Offline The_Ed

  • Trade Count: (0)
  • Posts: 1350
  • Location: MN - USA
  • Asperger's... SQUIRREL! I'm Anal Retentive *****!
Re: Price Check- What's it Worth?
« Reply #741 on: Tue, 05 March 2013, 04:43:33 »
Never heard of that one before... Pics? Specsheet? Symbol pinout?

EDIT: Found some info - http://www.tube-tester.com/sites/nixie/dat_arch/NEC_catalog_03.pdf
« Last Edit: Tue, 05 March 2013, 04:46:51 by The_Ed »
Reaper "frelled" me... Twice... Did he "frell" you too?... *brohug*
I'm camping for a week, and moving twice in a month. I'll get back to you when I can (If I don't then just send me another PM).
R.I.P.ster

Offline ishumprod

  • Trade Count: (0)
  • Posts: 138
  • Location: swizerland
Re: Price Check- What's it Worth?
« Reply #742 on: Tue, 05 March 2013, 05:46:53 »
they are exactly like this one :
home-made TKL rubber dome keyboard !

Offline esoomenona

  • Gnillort?
  • Trade Count: (0)
  • Posts: 5323
Re: Price Check- What's it Worth?
« Reply #743 on: Tue, 05 March 2013, 08:03:11 »
Those are very interesting! Now I want a nixie tube clock.

Offline ishumprod

  • Trade Count: (0)
  • Posts: 138
  • Location: swizerland
Re: Price Check- What's it Worth?
« Reply #744 on: Tue, 05 March 2013, 08:12:32 »
i've got 12 of them, i can send some of them to you, and later on if you see they work nicely we can arrange a price =)
home-made TKL rubber dome keyboard !

Offline esoomenona

  • Gnillort?
  • Trade Count: (0)
  • Posts: 5323
Re: Price Check- What's it Worth?
« Reply #745 on: Tue, 05 March 2013, 08:59:28 »
Through looking, I see kits that include the tubes. I wouldn't know what to do with tubes by themselves. Did you have a plan when you bought them?

Offline ishumprod

  • Trade Count: (0)
  • Posts: 138
  • Location: swizerland
Re: Price Check- What's it Worth?
« Reply #746 on: Tue, 05 March 2013, 09:04:06 »
i din't actually bought them, i found them in my sister's room when she moved out and she gave them to me, IIRC she found them in the city when walking and took them for fun
home-made TKL rubber dome keyboard !

Offline Tarzan

  • formerly known as Greystoke
  • * Maker
  • Trade Count: (0)
  • Posts: 1303
  • Location: US: Virginia
Re: Price Check- What's it Worth?
« Reply #747 on: Tue, 05 March 2013, 09:14:22 »
they are exactly like this one :
Show Image


That's some crazy tech!  I was looking up specs and found this block of info on an Ebay listing:

Nixie tube in-12a set of 12 pieces
This type of discharge indicator is perhaps the most famous and recognizable. In most cases, the phrase "gas discharge indicator" is used it against them. We also know that prior to the 1970s in the Soviet technical literature in relation to such indicators used now almost forgotten term "digital light" (apparently, tracing German «Ziffernröhre»).

Character display are models with the signs in the form of numbers: IN-1, IN-2, IN-4, IN-8, IN-8-2, IN-12A, IN-12B, IN-14, IN-16, IN-17, iN-18, with signs in the form of letters, symbols of physical quantities, and other special characters: iN-5A, 5B iN-, IN-7, IN7A, IN-7B, IN-15A, IN-15B, IN-19A, IN-19B, IN-19B.
brightness * 100 kd/m3
* angle> 60 °
supply voltage> 200v
discharge voltage of 170v
maintain the discharge voltage> 150v
current display> = 2mA


200 volts to keep them lit?!  I know, it's not the volts that'll kill you, it's the amps, but that's a hot tube!   :eek:

Interesting toys...  With all the interest lately in steampunk systems, you should be able to find someone to take them off your hands. 

GLWS!

Offline ishumprod

  • Trade Count: (0)
  • Posts: 138
  • Location: swizerland
Re: Price Check- What's it Worth?
« Reply #748 on: Tue, 05 March 2013, 09:34:17 »
yeah those 200V are the ones who told me : "you're too lazy to make a test plate"

so i didn't

you think i can selll this on classifieds ?
home-made TKL rubber dome keyboard !

Offline The_Ed

  • Trade Count: (0)
  • Posts: 1350
  • Location: MN - USA
  • Asperger's... SQUIRREL! I'm Anal Retentive *****!
Re: Price Check- What's it Worth?
« Reply #749 on: Tue, 05 March 2013, 15:26:20 »
IN-12A and IN-12B are the ones used in clocks. IN-7 and IN-7A are the ones used in chessboards. Yours are likely not popular enough to warrant more than a few dollars seeing as they display the standard 0-9 and decimal.
Reaper "frelled" me... Twice... Did he "frell" you too?... *brohug*
I'm camping for a week, and moving twice in a month. I'll get back to you when I can (If I don't then just send me another PM).
R.I.P.ster