« previous next »
Pages:  [1]     Go Down

Author Topic: Micro USB to USB C connector  (Read 2019 times)

0 Members and 1 Guest are viewing this topic.

Offline Subdromat

  • Thread Starter
  • Posts: 14
  • Location: Germany
Micro USB to USB C connector
« on: Wed, 14 December 2022, 02:12:33 »
Hey folks,

just a technically question. I just bought myself a rare WASD Code 87, because of its ISO design. Through that it is equipped with Micro USB.
Just planning to mount cnc case . The cnc case has USB C. Do I will get problems using the case with different connector type.

Tx
Logged

Offline PlayBox

  • Posts: 199
Re: Micro USB to USB C connector
« Reply #1 on: Wed, 14 December 2022, 14:22:03 »
Quote from: Subdromat on Wed, 14 December 2022, 02:12:33
Hey folks,

just a technically question. I just bought myself a rare WASD Code 87, because of its ISO design. Through that it is equipped with Micro USB.
Just planning to mount cnc case . The cnc case has USB C. Do I will get problems using the case with different connector type.

Tx
if its the case for this exact keyboard go ahead and try. if not it won't work
Logged
propably sent from my amazon kindle 10th gen

Offline Leslieann

  • * Elevated Elder
  • Posts: 4518
Re: Micro USB to USB C connector
« Reply #2 on: Thu, 15 December 2022, 12:12:07 »
WASD sells an adapter to convert from micro to type C for their aluminum cases, it was available as an upgrade option for the case.

If you lack the part get in touch with them they may still have some.
Logged
Novelkeys NK65AE w/62g Zilents/39g springs
More
62g Zilents/lubed/Novelkeys 39g springs, HK Gaming Thick PBT caps, Netdot Gen10 magnetic cable, pic
| Filco MJ2 L.E. Vortex Case, Jailhouse Blues, heavily customized
More
Vortex case squared up/blasted finish removed/custom feet/paint/winkey blockoff plate, HID Liberator, stainless steel universal plate, 3d printed adapters, Type C, Netdot Gen10 magnetic cable, foam sound dampened, HK Gaming Thick PBT caps (o-ringed), Cherry Jailhouse Blues w/lubed/clipped Cherry light springs, 40g actuation
| GMMK TKL
More
w/ Kailh Purple Pros/lubed/Novelkeys 39g springs, HK Gaming Thick PBT caps, Netdot Gen10 Magnetic cable
| PF65 3d printed 65% w/LCD and hot swap
More
Box Jades, Interchangeable trim, mini lcd, QMK, underglow, HK Gaming Thick PBT caps, O-rings, Netdot Gen10 magnetic cable, in progress link
| Magicforce 68
More
MF68 pcb, Outemu Blues, in progress
| YMDK75 Jail Housed Gateron Blues
More
J-spacers, YMDK Thick PBT, O-rings, SIP sockets
| KBT Race S L.E.
More
Ergo Clears, custom WASD caps
| Das Pro
More
Costar model with browns
| GH60
More
Cherry Blacks, custom 3d printed case
| Logitech Illumininated | IBM Model M (x2)
Definitive Omron Guide. | 3d printed Keyboard FAQ/Discussion

Offline Subdromat

  • Thread Starter
  • Posts: 14
  • Location: Germany
Re: Micro USB to USB C connector
« Reply #3 on: Thu, 15 December 2022, 14:22:34 »
I just connected the case and it works:

Both keyboards are provided with 4 wires (ground, minus, plus, data) , the old board with additional shield, actually USB 2.0. The USB-C controller of the cnc case is doing the same... as the old Micro USB controller. Was a littel confusing because of different wire colours, but the plug was in identical order.

Thanks for your advice !
Logged

Offline suicidal_orange

  • * Global Moderator
  • Posts: 4771
  • Location: England
Re: Micro USB to USB C connector
« Reply #4 on: Fri, 16 December 2022, 07:35:10 »
Quote from: Subdromat on Thu, 15 December 2022, 14:22:34
Both keyboards are provided with 4 wires (ground, data +, data -, VCC (5v power))
USB is designed to be backwards compatible so good to hear it works :)

The pinout is as "quoted" though :thumb:
Logged
120/100g linear Zealio R1  
GMK Hyperfuse
'Split everything' perfection   		MX Clear
SA Hack'd by Geeks     
EasyAVR mod
Pages:  [1]     Go Up
« previous next »