« previous next »
Pages: « 1 2 3 [4]   All   Go Down

Author Topic: [IC] LeandreN Round 4 - PCBs, plates etc.  (Read 41893 times)

0 Members and 1 Guest are viewing this topic.

Offline chilldude_22

  • Official streetman
  • Posts: 107
  • Location: South Dakota
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #150 on: Mon, 22 February 2016, 10:14:32 »
Quote from: axtran on Mon, 22 February 2016, 06:21:54
GON's Side LEDs and extra electronics won't let the PCB be an immediate fit into a Tex Aluminum case. You'll want to use the acrylic and modify it. The screw holes fit as asked though.

I've put a Gon PCB in a TEX Aluminum case no problem. Granted I didn't use any bottom SMD LEDs, but I don't know why you would want to.
Logged

Offline Bumbibear

  • Posts: 42
  • Location: ISO - Sweden
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #151 on: Mon, 22 February 2016, 10:18:02 »
Quote from: axtran on Mon, 22 February 2016, 10:13:04

Quote from: Bumbibear on Mon, 22 February 2016, 10:08:25
Quote from: axtran on Mon, 22 February 2016, 06:21:54
GON's Side LEDs and extra electronics won't let the PCB be an immediate fit into a Tex Aluminum case. You'll want to use the acrylic and modify it. The screw holes fit as asked though.

Is there any other type of aluminium case that is rather simple to acquire that you know would fit ?

Find any case without ridges, really. The MassDrop cast aluminum cases work, or the cases on Amazon right now also work (I think they're called iQunix Lambo cases).

Sweet! Found this one: http://dro.ps/b/eBi1m6F

Thank you! :)
Logged
Ducky Shine 3 TKL ISO
Soon: LeandreN GB 4 60% - Sentraq 78%

Offline pichu23

  • ୧༼ಠ益ಠ༽୨ FITE ME
  • * Esteemed Elder
  • Posts: 1586
  • Location: Littleroot Town, Hoenn
  • ʕ ͡·ᴥ ͡· ʔ
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #152 on: Mon, 22 February 2016, 13:45:47 »
Quote from: bweeldreyer on Mon, 22 February 2016, 10:14:32
Quote from: axtran on Mon, 22 February 2016, 06:21:54
GON's Side LEDs and extra electronics won't let the PCB be an immediate fit into a Tex Aluminum case. You'll want to use the acrylic and modify it. The screw holes fit as asked though.

I've put a Gon PCB in a TEX Aluminum case no problem. Granted I didn't use any bottom SMD LEDs, but I don't know why you would want to.

Yeah, what he said. As long as there is not smd leds at the bottom, it should fit the alu case just fine :D
Logged
Collection(s) : Ducky Shine 2 TKL x Poker II x 62g FaceW x 62g Gateron Black GON NerD TKL x 65g Z GON NerD 60

Offline axtran

  • Posts: 456
  • Location: Washington, DC, USA
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #153 on: Mon, 22 February 2016, 14:07:30 »
All I'm saying is why buy GON PCB of you don't go all rainbow lightshow?
Logged
MX Silent > MX Vintage Black > Everything Else

Offline pichu23

  • ୧༼ಠ益ಠ༽୨ FITE ME
  • * Esteemed Elder
  • Posts: 1586
  • Location: Littleroot Town, Hoenn
  • ʕ ͡·ᴥ ͡· ʔ
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #154 on: Mon, 22 February 2016, 14:31:08 »
Quote from: axtran on Mon, 22 February 2016, 14:07:30
All I'm saying is why buy GON PCB of you don't go all rainbow lightshow?

Already have a NerD TKL with an acrylic case for that  ;)
The 60% would be for something else  :)
Logged
Collection(s) : Ducky Shine 2 TKL x Poker II x 62g FaceW x 62g Gateron Black GON NerD TKL x 65g Z GON NerD 60

Offline Chewypost

  • Posts: 133
  • Location: Ontario, Canada
  • Bacon PanCAAAKES
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #155 on: Mon, 22 February 2016, 22:08:53 »
Would 65% ever be an option? :0
Logged
Hana DSA - Duck Octagon V2| Ducky Mini - MX Red
_____________________________________

Offline Pinecone

  • Posts: 109
  • Location: Los Angeles, CA
  • Pine Switches
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #156 on: Tue, 23 February 2016, 01:04:59 »
What SMD LED size would best fit the PCB?
Logged

Offline Ludovician

  • Posts: 330
  • Location: Queensland, Australia
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #157 on: Tue, 23 February 2016, 01:26:20 »
Quote from: Chewypost on Mon, 22 February 2016, 22:08:53
Would 65% ever be an option? :0

Have you checked out the Clueboard?
Logged
Typing speed:
More
Visit the Typing Test and try!

My collection:
More
HHKB Pro 2 (Blank, white) | HHKB Pro 2 Type-S (Blank, white) | Topre Realforce 87UB silent-modded (not currently functional) | Das Keyboard Model S Professional Silent (MX Brown) | IBM Model M 1391401 - 9th January 1991 (Bolt+Floss-modded) | Apple keyboard m0116 (Orange Alps) | Unidentified DIN Keyboard (White Alps) | ADDS 1010 (Green Alps) | AEK II (Linear-modded, USB-converted) | IBM PC-AT Model F | Noppoo Choc Mini (MX Black) | Amstrad PC2286 | BigKeys LX | IBM Model M 1391401 - 6th September 1990 | IBM Model M2 1395300 - 28th February 1991 | Leopold FC660C | Cherry G80-11802 (MX Brown) | Matias Tactile Pro (Simplfied grey Alps) | Razer Blackwidow (MX Blue) | Novatouch 55g | Focus FK-2001 (White alps) | DSE Multitech (Blue alps) | Dell AT101W (Matias quiet) | Pok3r (White w/Clears) | KBP V80 (Blue Alps)

Pending:
Infinity kit

Offline axtran

  • Posts: 456
  • Location: Washington, DC, USA
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #158 on: Tue, 23 February 2016, 05:49:26 »

Quote from: Pinecone on Tue, 23 February 2016, 01:04:59
What SMD LED size would best fit the PCB?

1206 SMD.
Logged
MX Silent > MX Vintage Black > Everything Else

Offline Atredl

  • Posts: 805
  • Location: SoCal
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #159 on: Wed, 24 February 2016, 00:23:29 »
Quote from: bweeldreyer on Mon, 22 February 2016, 10:14:32
Quote from: axtran on Mon, 22 February 2016, 06:21:54
GON's Side LEDs and extra electronics won't let the PCB be an immediate fit into a Tex Aluminum case. You'll want to use the acrylic and modify it. The screw holes fit as asked though.

I've put a Gon PCB in a TEX Aluminum case no problem. Granted I didn't use any bottom SMD LEDs, but I don't know why you would want to.

This is exactly what I needed to hear :D Count me in for a PCB in black  :thumb:
Logged

Offline Chewypost

  • Posts: 133
  • Location: Ontario, Canada
  • Bacon PanCAAAKES
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #160 on: Wed, 24 February 2016, 12:39:41 »
Quote from: Ludovician on Tue, 23 February 2016, 01:26:20
Quote from: Chewypost on Mon, 22 February 2016, 22:08:53
Would 65% ever be an option? :0

Have you checked out the Clueboard?

I have actually, but I'm more looking more for something with 4 keys along the side of the layout like this.
.

I've seen some Korean boards like this, but wanted to see if other places had it too.
Logged
Hana DSA - Duck Octagon V2| Ducky Mini - MX Red
_____________________________________

Offline eksuen

  • Posts: 614
  • Location: Torgue Zone
  • Ambassador of explosions.
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #161 on: Wed, 24 February 2016, 13:23:20 »
Quote from: Chewypost on Wed, 24 February 2016, 12:39:41
Quote from: Ludovician on Tue, 23 February 2016, 01:26:20
Quote from: Chewypost on Mon, 22 February 2016, 22:08:53
Would 65% ever be an option? :0

Have you checked out the Clueboard?

I have actually, but I'm more looking more for something with 4 keys along the side of the layout like this.
Show Image
.

I've seen some Korean boards like this, but wanted to see if other places had it too.

https://geekhack.org/index.php?topic=77434.0;topicseen

The buy already ran on Massdrop, but you may be able to pick one up second-hand.
Logged

Offline Chewypost

  • Posts: 133
  • Location: Ontario, Canada
  • Bacon PanCAAAKES
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #162 on: Wed, 24 February 2016, 13:52:16 »
Quote from: eksuen on Wed, 24 February 2016, 13:23:20
Quote from: Chewypost on Wed, 24 February 2016, 12:39:41
Quote from: Ludovician on Tue, 23 February 2016, 01:26:20
Quote from: Chewypost on Mon, 22 February 2016, 22:08:53
Would 65% ever be an option? :0

Have you checked out the Clueboard?

I have actually, but I'm more looking more for something with 4 keys along the side of the layout like this.
Show Image
.

I've seen some Korean boards like this, but wanted to see if other places had it too.

https://geekhack.org/index.php?topic=77434.0;topicseen

The buy already ran on Massdrop, but you may be able to pick one up second-hand.

Yah I saw that too. Looks beautiful and form is just what I wanted. I'm just looking into whether or not I can make a custom case for it and add some LED for the switches and for some underglow (rgb underglow).
Logged
Hana DSA - Duck Octagon V2| Ducky Mini - MX Red
_____________________________________

Offline The_Skynacho

  • Posts: 4
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #163 on: Wed, 24 February 2016, 16:21:26 »
This is great, I am in for a PCB and plate. My case and zealios have been unused for too long.  :)

[Edited for clarity]
« Last Edit: Wed, 24 February 2016, 16:25:14 by The_Skynacho »
Logged

Offline grav3serker

  • Posts: 251
  • Location: California
  • graves + berserker = grav3serker
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #164 on: Wed, 24 February 2016, 20:41:20 »
Would the RGB LEDs from Winkeyless work on the bottom of the board? If so, what would I need? Resistors come pre-soldered, right?
Logged

Offline chilldude_22

  • Official streetman
  • Posts: 107
  • Location: South Dakota
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #165 on: Wed, 24 February 2016, 21:09:12 »
Quote from: grav3serker on Wed, 24 February 2016, 20:41:20
Would the RGB LEDs from Winkeyless work on the bottom of the board? If so, what would I need? Resistors come pre-soldered, right?

No, they won't work. Resistors and diodes will be pre-soldered if I remember right.
Logged

Offline grav3serker

  • Posts: 251
  • Location: California
  • graves + berserker = grav3serker
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #166 on: Wed, 24 February 2016, 21:16:36 »
Quote from: bweeldreyer on Wed, 24 February 2016, 21:09:12
Quote from: grav3serker on Wed, 24 February 2016, 20:41:20
Would the RGB LEDs from Winkeyless work on the bottom of the board? If so, what would I need? Resistors come pre-soldered, right?

No, they won't work. Resistors and diodes will be pre-soldered if I remember right.

So what LEDs can I use for the bottom? The SMDs from GON?
Logged

Offline chilldude_22

  • Official streetman
  • Posts: 107
  • Location: South Dakota
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #167 on: Wed, 24 February 2016, 21:18:02 »
Quote from: grav3serker on Wed, 24 February 2016, 21:16:36
Quote from: bweeldreyer on Wed, 24 February 2016, 21:09:12
Quote from: grav3serker on Wed, 24 February 2016, 20:41:20
Would the RGB LEDs from Winkeyless work on the bottom of the board? If so, what would I need? Resistors come pre-soldered, right?

No, they won't work. Resistors and diodes will be pre-soldered if I remember right.

So what LEDs can I use for the bottom? The SMDs from GON?

Yeah, they're standard 1206 SMD LEDs. You can get them on eBay for pretty cheap.
Logged

Offline grav3serker

  • Posts: 251
  • Location: California
  • graves + berserker = grav3serker
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #168 on: Wed, 24 February 2016, 21:19:24 »
Quote from: bweeldreyer on Wed, 24 February 2016, 21:18:02
Quote from: grav3serker on Wed, 24 February 2016, 21:16:36
Quote from: bweeldreyer on Wed, 24 February 2016, 21:09:12
Quote from: grav3serker on Wed, 24 February 2016, 20:41:20
Would the RGB LEDs from Winkeyless work on the bottom of the board? If so, what would I need? Resistors come pre-soldered, right?

No, they won't work. Resistors and diodes will be pre-soldered if I remember right.

So what LEDs can I use for the bottom? The SMDs from GON?

Yeah, they're standard 1206 SMD LEDs. You can get them on eBay for pretty cheap.

Thanks a bunch!
Logged

Offline Fullcream

  • Posts: 147
  • Location: Australia
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #169 on: Thu, 25 February 2016, 06:09:53 »
Hello, I'm sorry that I don't know anything. All I want to do is buy parts to build a hhkb layout board and want to be able to put LEDs through the switches and in to the pcb.
(short right shift, 2x1u instead of the standard 2u backspace on top row, bottom row: 1u/1.5u/7u/1.5u/1u, and stepped caps would be nice.)
So I guess I need a pcb, plate, and stabilizers. Am I in the right place?
Logged

Offline Jumie

  • Posts: 298
  • Location: Dangerously Beautiful
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #170 on: Thu, 25 February 2016, 06:24:36 »
Quote from: Fullcream on Thu, 25 February 2016, 06:09:53
Hello, I'm sorry that I don't know anything. All I want to do is buy parts to build a hhkb layout board and want to be able to put LEDs through the switches and in to the pcb.
(short right shift, 2x1u instead of the standard 2u backspace on top row, bottom row: 1u/1.5u/7u/1.5u/1u, and stepped caps would be nice.)
So I guess I need a pcb, plate, and stabilizers. Am I in the right place?

You are.. Stay tune
Logged

Offline Fullcream

  • Posts: 147
  • Location: Australia
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #171 on: Thu, 25 February 2016, 06:30:24 »
thanks m8.
Logged

Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #172 on: Fri, 26 February 2016, 04:03:13 »
Hi. Sorry for the lack of updates. I'm going to merge the winkeyless and HHKB buy into this one. Any orders for winkeyless and HHKB plates can be edited or cancelled now if you want. Still waiting for samples...

LeandreN
Logged

Offline TalkingTree

  • Posts: 2452
  • Location: Italy (142)
    • My projects
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #173 on: Fri, 26 February 2016, 05:11:28 »
Quote from: LeandreN on Fri, 26 February 2016, 04:03:13
Any orders for winkeyless and HHKB plates can be edited or cancelled now if you want.
Will you handle merging the orders? I wanna add things from this IC to the HHKB plate I ordered.
Also, ETA on this GB?
Logged
My opensource projects: GH80-3000, TOAD, XMMX. Classified: stuff

Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #174 on: Fri, 26 February 2016, 05:13:34 »


Quote from: TalkingTree on Fri, 26 February 2016, 05:11:28
Quote from: LeandreN on Fri, 26 February 2016, 04:03:13
Any orders for winkeyless and HHKB plates can be edited or cancelled now if you want.
Will you handle merging the orders? I wanna add things from this IC to the HHKB plate I ordered.
Also, ETA on this GB?

No ETA yet. Need the samples and then shortly after, the GB will start.

I will probably delete orders and send a message to everyone to refill the form. I know this is very inconvenient, but it is way easier for me.
Logged

Offline TalkingTree

  • Posts: 2452
  • Location: Italy (142)
    • My projects
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #175 on: Fri, 26 February 2016, 05:14:18 »
Quote from: LeandreN on Fri, 26 February 2016, 05:13:34
I will probably delete orders and send a message to everyone to refill the form. I know this is very inconvenient, but it is way easier for me.
Yeah, that looks like the safest and easiest way.
Logged
My opensource projects: GH80-3000, TOAD, XMMX. Classified: stuff

Offline endeavour90

  • Posts: 9
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #176 on: Fri, 26 February 2016, 07:24:43 »
Hi, I am new to custom keyboard.
I checked the GON website, it offers Nerdy GUI to customize the keyboard layout but it is only available on windows.
Is there a similar software to edit keyboard layout in mac osx?
I don't really mind if it does not have the friendly interface, but getting a windows computer to edit the layout is too much for me  :D.
Logged

Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #177 on: Fri, 26 February 2016, 07:27:13 »
Quote from: endeavour90 on Fri, 26 February 2016, 07:24:43
Hi, I am new to custom keyboard.
I checked the GON website, it offers Nerdy GUI to customize the keyboard layout but it is only available on windows.
Is there a similar software to edit keyboard layout in mac osx?
I don't really mind if it does not have the friendly interface, but getting a windows computer to edit the layout is too much for me  :D.
The software is Windows only. I checked this up for someone a couple of weeks ago. Unfortunate for for people who use OSX exclusively.
Logged

Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #178 on: Mon, 29 February 2016, 12:44:53 »
Logged

Offline grav3serker

  • Posts: 251
  • Location: California
  • graves + berserker = grav3serker
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #179 on: Mon, 29 February 2016, 13:01:10 »
Logged

Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #180 on: Mon, 29 February 2016, 13:15:13 »
Logged

Offline TalkingTree

  • Posts: 2452
  • Location: Italy (142)
    • My projects
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #181 on: Mon, 29 February 2016, 14:21:04 »
Quote from: LeandreN on Mon, 29 February 2016, 12:44:53
jump over here

https://geekhack.org/index.php?topic=79315.msg2037225#msg2037225
The form is still for HHKB and Winkeyless plates. Did you clear the (pre)orders or do you still have them?
Logged
My opensource projects: GH80-3000, TOAD, XMMX. Classified: stuff

Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #182 on: Mon, 29 February 2016, 14:24:59 »
Quote from: TalkingTree on Mon, 29 February 2016, 14:21:04
Quote from: LeandreN on Mon, 29 February 2016, 12:44:53
jump over here

https://geekhack.org/index.php?topic=79315.msg2037225#msg2037225
The form is still for HHKB and Winkeyless plates. Did you clear the (pre)orders or do you still have them?

The submissions will be deleted. I will message everyone that entered.
Logged

Offline TalkingTree

  • Posts: 2452
  • Location: Italy (142)
    • My projects
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #183 on: Mon, 29 February 2016, 14:29:23 »
Quote from: LeandreN on Mon, 29 February 2016, 14:24:59
Quote from: TalkingTree on Mon, 29 February 2016, 14:21:04
Quote from: LeandreN on Mon, 29 February 2016, 12:44:53
jump over here

https://geekhack.org/index.php?topic=79315.msg2037225#msg2037225
The form is still for HHKB and Winkeyless plates. Did you clear the (pre)orders or do you still have them?

The submissions will be deleted. I will message everyone that entered.
Roger that. Will the new form include orders for PCBs and universal plates as well?
Logged
My opensource projects: GH80-3000, TOAD, XMMX. Classified: stuff

Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #184 on: Mon, 29 February 2016, 14:30:44 »
Quote from: TalkingTree on Mon, 29 February 2016, 14:29:23
Quote from: LeandreN on Mon, 29 February 2016, 14:24:59
Quote from: TalkingTree on Mon, 29 February 2016, 14:21:04
Quote from: LeandreN on Mon, 29 February 2016, 12:44:53
jump over here

https://geekhack.org/index.php?topic=79315.msg2037225#msg2037225
The form is still for HHKB and Winkeyless plates. Did you clear the (pre)orders or do you still have them?

The submissions will be deleted. I will message everyone that entered.
Roger that. Will the new form include orders for PCBs and universal plates as well?
Correct
Logged

Offline TalkingTree

  • Posts: 2452
  • Location: Italy (142)
    • My projects
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #185 on: Mon, 29 February 2016, 14:33:32 »
Quote from: LeandreN on Mon, 29 February 2016, 14:30:44
Quote from: TalkingTree on Mon, 29 February 2016, 14:29:23
Quote from: LeandreN on Mon, 29 February 2016, 14:24:59
Quote from: TalkingTree on Mon, 29 February 2016, 14:21:04
Quote from: LeandreN on Mon, 29 February 2016, 12:44:53
jump over here

https://geekhack.org/index.php?topic=79315.msg2037225#msg2037225
The form is still for HHKB and Winkeyless plates. Did you clear the (pre)orders or do you still have them?

The submissions will be deleted. I will message everyone that entered.
Roger that. Will the new form include orders for PCBs and universal plates as well?
Correct
You're mighty awesome, as always.
Logged
My opensource projects: GH80-3000, TOAD, XMMX. Classified: stuff

Offline bnthor

  • Posts: 12
  • Location: Aix en Provence, France
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #186 on: Tue, 01 March 2016, 06:29:12 »
I'm in for a black plate and a black PCB, I just need to know, does the PCB is ISO compatible ?
OR even two of both... In that case one of the plates would be Red.
Logged

Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #187 on: Tue, 01 March 2016, 06:30:37 »
Quote from: bnthor on Tue, 01 March 2016, 06:29:12
I'm in for a black plate and a black PCB, I just need to know, does the PCB is ISO compatible ?
OR even two of both... In that case one of the plates would be Red.

Of course. ISO is the only layout!

I'm nice to include ANSI support.
Logged

Offline bnthor

  • Posts: 12
  • Location: Aix en Provence, France
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #188 on: Tue, 01 March 2016, 09:09:39 »
Quote from: LeandreN on Tue, 01 March 2016, 06:30:37
Quote from: bnthor on Tue, 01 March 2016, 06:29:12
I'm in for a black plate and a black PCB, I just need to know, does the PCB is ISO compatible ?
OR even two of both... In that case one of the plates would be Red.

Of course. ISO is the only layout!

I'm nice to include ANSI support.

haha Great  ;) then I'm definitely in !
Logged

Offline bnthor

  • Posts: 12
  • Location: Aix en Provence, France
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #189 on: Tue, 01 March 2016, 09:29:35 »
Sorry I'm a bit of a noob... but the Gon PCB should fit in there right ? it's said being compatible with
  • Poker/ Poker X/ Poker 2
  • GH60
  • Pure/ Pure Pro
  • Ducky Mini (MK1 only)
  • V60 (with 3 screws affixed)

Logged

Offline pichu23

  • ୧༼ಠ益ಠ༽୨ FITE ME
  • * Esteemed Elder
  • Posts: 1586
  • Location: Littleroot Town, Hoenn
  • ʕ ͡·ᴥ ͡· ʔ
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #190 on: Tue, 01 March 2016, 12:09:34 »
Quote from: bnthor on Tue, 01 March 2016, 09:29:35
Sorry I'm a bit of a noob... but the Gon PCB should fit in there right ? it's said being compatible with
  • Poker/ Poker X/ Poker 2
  • GH60
  • Pure/ Pure Pro
  • Ducky Mini (MK1 only)
  • V60 (with 3 screws affixed)

Show Image


It will work only if you're not soldering the smd leds but other than that, should be fine.
Logged
Collection(s) : Ducky Shine 2 TKL x Poker II x 62g FaceW x 62g Gateron Black GON NerD TKL x 65g Z GON NerD 60

Offline bnthor

  • Posts: 12
  • Location: Aix en Provence, France
Re: [IC] LeandreN Round 4 - PCBs, plates etc.
« Reply #191 on: Tue, 01 March 2016, 12:36:46 »
Quote from: pichu23 on Tue, 01 March 2016, 12:09:34
Quote from: bnthor on Tue, 01 March 2016, 09:29:35
Sorry I'm a bit of a noob... but the Gon PCB should fit in there right ? it's said being compatible with
  • Poker/ Poker X/ Poker 2
  • GH60
  • Pure/ Pure Pro
  • Ducky Mini (MK1 only)
  • V60 (with 3 screws affixed)

Show Image


It will work only if you're not soldering the smd leds but other than that, should be fine.

THX!
Logged
Pages: « 1 2 3 [4]   All   Go Up
« previous next »