Author Topic: [IC] iS0 - illuminati keyboards - PREORDER IS LIVE  (Read 9645 times)

0 Members and 1 Guest are viewing this topic.

Offline blacksimon

  • Thread Starter
  • Posts: 161
  • illuminati.works
    • illuminati.works
[IC] iS0 - illuminati keyboards - PREORDER IS LIVE
« on: Thu, 11 July 2019, 05:29:06 »
GB thread


iS0 is avail (soon)
 
iS0 is a 1-key ISO macropad custom
 

 
Have you been wondering what to do with all of those excess ISO enters from your keysets?

Well, here you go, an iso macropad! Configure it as a “boss-button”, configure it as a mouse click, or whatever you can think of!

iS0 will come in 6 colors:Matte Black, Standard Silver, Olivia Rose Gold, Deep Red, Deep Navy, and Dark Grey



SPECS:
  • 18mm front height
  • 8 degree typing angle
  • 69g weight (assembled)
  • 6063 series alu
  • 6 color options
  • Top mounted polycarbonate plate
  • QMK PCB with in-switch LED and dedicated reset switch
  • USB C
  • $69.99 target preorder price




iS0 is a two part, top mounted custom kit – featuring a specialty built polycarbonate plate for optimal keyfeel, total overkill for 1 key macropad – just the way we like it!

Weight of the unit will be 69 grams with the standard configuration


Target price per unit will be $69.99 – each unit will be painstakingly controlled for the smoothest and fullest anodization and will arrive in a specialty packaging



Pcb by Ai03
-Using fullsize atmega controller (32u2)
-Dedicated reset switch on bottom
-In-switch LED support
-Will be available on config.qmk website for plebs like me (maybe VIA)

 
Pre-order / Group buy details:
 
-Group buy to start on Aug 1st
-Preorder will be done on Doyustudio website
-150 units will be available, FCFS
-The buy will remain open for 31 days
-Shipping will be 8 months after group buy close
-All units will ship from Taiwan
-There is no limit on units per person
-Orders will be shipped in batches, in the same order they are received
 



Additional notes / Q&A
 
The 8 month estimate is to prevent the usual “4 month” estimated timeline that ends up being 8 months anyways. We want to take our time and deliver the most beautiful looking keyboard we can, its likely we end up shipping before then, who knows

The $69.99 price may seem high, but in reality, we will more than likely lose money on this group buy. The chosen manufacturer is very high end (I’ll refrain from name dropping, but they produce some very high end keyboards you’ve seen) And the quality control and packaging doesn’t help the fact either. In any case, the goal is to make everyone happy

Yes, we know this project is silly/dumb. It’s not for everyone, but we hope it’s for you!




Here is the link to more info about iS0 (sorry my website is terrible)


A gallery of prototype samples can be seen here (under i69 pics)


Feel free to pop into the discord (iS0 channel) if you have any questions or comments
« Last Edit: Thu, 01 August 2019, 01:01:34 by blacksimon »

Offline blacksimon

  • Thread Starter
  • Posts: 161
  • illuminati.works
    • illuminati.works
Re: iS0 Avail! ISO macropad from illuminati keyboards
« Reply #1 on: Thu, 11 July 2019, 05:31:32 »
Q&A FROM THIS THREAD

Are there any shipping cost estimates?

E.g. to Korea, China, Philippines, Australia, EU, USA, Canada would be a good starting point to have listed.

No more than $10 to worldwide with standard shipping

EMS/DHL: (estimated)
Korea - $15
Philippines - $15
Australia - $15
EU - $18
USA - $15
Canada - $15


ne _____(something thats not iso) avail?

_____ can be inserted into the unit without issue, however, this is unauthorized usage, and I will come to your house and hit you with an iso enter


Any chance there will be proxies, specifically an EU one?

Through some basic math, we've figured that it's cheaper for everyone to ship from Taiwan. Since we are already losing money per unit and absorbing that cost, if we were to give units to EU retailers for example, they would pay more per unit (actual cost instead of discounted rate) on top of VAT, which ends up over $85 per unit (assuming the vendor makes 0 money)

Shipping to anywhere in the world should be affordable, this is one of the reasons I chose Doyustudio as the vendor


The price is very reasonable (for this hobby anyway) but shouldn’t it be $69.69?

I actually really need those extra 30 cents :(

That $45 is gonna help pay for some cool stuff


Open for 31 days? I think this will sell out fast..

I'm open to the idea of doing more than 150 units if people are interested enough, hence the big GB window. I'll be flying down to Taiwan to help qc and pack anyways, I don't mind the extra work as long as its for people who really like/want iS0





« Last Edit: Fri, 12 July 2019, 03:34:45 by blacksimon »

Offline Oblotzky

  • Posts: 1916
  • Location: Cologne, Germany
  • Backspace is for people that make mistakes.
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #2 on: Thu, 11 July 2019, 05:34:47 »
no love for BAE?

Offline wcmbk

  • Posts: 43
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #3 on: Thu, 11 July 2019, 05:35:30 »
The price is very reasonable (for this hobby anyway) but shouldn’t it be $69.69?

Offline kawasaki161

  • Posts: 1059
  • Location: Germany
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #4 on: Thu, 11 July 2019, 05:36:23 »
ne short left shift avail?

Offline blacksimon

  • Thread Starter
  • Posts: 161
  • illuminati.works
    • illuminati.works
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #5 on: Thu, 11 July 2019, 05:36:46 »
The price is very reasonable (for this hobby anyway) but shouldn’t it be $69.69?

I actually really need those extra 30 cents :(

That $45 is gonna help pay for some cool stuff

Offline blacksimon

  • Thread Starter
  • Posts: 161
  • illuminati.works
    • illuminati.works
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #6 on: Thu, 11 July 2019, 05:38:01 »
ne short left shift avail?

Short left shifts can be inserted into the unit without issue, however, this is unauthorized usage, and I will come to your house and hit you with an iso enter

Offline Oblotzky

  • Posts: 1916
  • Location: Cologne, Germany
  • Backspace is for people that make mistakes.
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #7 on: Thu, 11 July 2019, 05:41:52 »
Are there any shipping cost estimates?

E.g. to Korea, China, Philippines, Australia, EU, USA, Canada would be a good starting point to have listed.

Offline Okonomiyaki#2832

  • Posts: 511
  • Eating Okonomiyaki
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #8 on: Thu, 11 July 2019, 05:42:42 »
NE ANSI?

Offline blacksimon

  • Thread Starter
  • Posts: 161
  • illuminati.works
    • illuminati.works
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #9 on: Thu, 11 July 2019, 05:46:43 »
Are there any shipping cost estimates?

E.g. to Korea, China, Philippines, Australia, EU, USA, Canada would be a good starting point to have listed.

Not yet, as the exact specs of the hard case for the unit are not finalized yet - though I assure you they will be dirt cheap (Doyu has very good shipping rates)

I'll add them to main post as soon as we have a good idea of size/weights

Offline janglad

  • * Vendor
  • Posts: 620
  • Location: Belgium
  • Clavier.xyz
    • Clavier.xyz
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #10 on: Thu, 11 July 2019, 06:05:46 »
This is nice and everyone should buy one

Offline blacksimon

  • Thread Starter
  • Posts: 161
  • illuminati.works
    • illuminati.works
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #11 on: Thu, 11 July 2019, 06:08:32 »
This is nice and everyone should buy one

Thank you jangdad

NE ANSI?

ANSI will be available to all users at an increased base kit cost of $12, for the 3 people that want it
« Last Edit: Thu, 11 July 2019, 06:12:20 by blacksimon »

Online hottrout

  • Posts: 785
  • Location: Norn Iron
  • I'd Hit Dat Key
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #12 on: Thu, 11 July 2019, 06:12:59 »
I love it for just supporting ISO. 
Current Daily Driver : Maja Ergo - Kiwi

Systems
More
Work |i9-7940x@4.8ghz|32GB(3600)|RTX 2080Ti|Bespoke Water, 360m Rad|X299 Prime Deluxe|EK x299 Monoblock|Optane 900p|2x1TB 960 Pro|2x10TB Helium|Dell U3415W + Dell UP2116Q
Home |i9-9900k@5GHz|16GB(3200)|STRIX-RTX2080Ti|EK Closed Water Loop|Z390-F|1TB 960 Pro|1TB 980 Pro|Dell AW3418DW|NEC MultiSync|Rode NT1&AI-1|Drobo16TB
Mining |i5-7500|16GB(2400)|H110 Pro BTC+|8x1080Ti|2x1650Watt PSU

Plus 35 years of collecting retro computers, consoles, games, peripherals, mainframes and mini's as well as their software, games and manuals. 100's of systems including every Amiga model made

Keyboards
More
IBM 3101  |  IBM 3276  |  IBM 5150  |  IBM ModelM  |  Dictaphone Dual Display  |  Vintage Cherrys (1982 onwards, just about all of them)  |  Commodore (all of them)  |  Nixdorf  |  Siemens  |  ICL  |  Filco Majistouch - Cherry Brown  |  KBDFans 5degree - Zilents  |  Rama M6-B - Healios  |  CA66 - Tealios v1  |  ClueBoard - Zealios v1  |  Varmilo VA69M - Cherry Black  |  E7-V1 SE - Tealios v2  |  Rama U-80 - Ink Blacks 205g0  |  VN66  |  BOCC  |  Rama M10-C  |  FLX Virgo  |  Rama M60-A LYN  |  2 x Space65 CyberVoyager  |  Clarabelle  |  Elongate Mini 1800  |  Petrichor 1800 - TKC Tangerine v1 Relubed 205g  |  Vulcan Maja Ergo - TKC Kiwi  |  Think6.5v2  |  Jacky Bear 65%  |  Sakabato CB87 TKL - TKC Banana Split  |  KCK KY-01  |  Jae J-01 F&F  |  S7.7  |  The Adélie  |  NIX OxalyS80 LE  |  Mesa TKL  |  F&F Smith & Rune IRON180 Graen/Brass  |  Skog Reboot  |

Offline piit79

  • Posts: 319
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #13 on: Thu, 11 July 2019, 06:17:11 »
This is outrageously ridiculous - and I got to have at least one :-D

Any chance there will be proxies, specifically an EU one?

Offline blacksimon

  • Thread Starter
  • Posts: 161
  • illuminati.works
    • illuminati.works
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #14 on: Thu, 11 July 2019, 06:21:45 »
This is outrageously ridiculous - and I got to have at least one :-D

Any chance there will be proxies, specifically an EU one?

Through some basic math, we've figured that it's cheaper for everyone to ship from Taiwan. Since we are already losing money per unit and absorbing that cost, if we were to give units to EU retailers, they would pay more per unit (actual cost instead of discounted rate) on top of VAT, which ends up over $85 per unit (assuming the vendor makes 0 money)

Shipping to anywhere in the EU should easily be under $20, with VAT and customs and all (assuming you aren't in Italy)
« Last Edit: Thu, 11 July 2019, 06:28:48 by blacksimon »

Offline rondg

  • Posts: 476
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #15 on: Thu, 11 July 2019, 06:29:56 »
Open for 31 days? I think this will sell out fast..

Offline blacksimon

  • Thread Starter
  • Posts: 161
  • illuminati.works
    • illuminati.works
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #16 on: Thu, 11 July 2019, 06:32:31 »
Open for 31 days? I think this will sell out fast..

I'm open to the idea of doing more than 150 units if people are interested enough, hence the big GB window. I'll be flying down to Taiwan to help qc and pack anyways, I don't mind the extra work as long as its for people who really like/want iS0

Offline neralo

  • Posts: 178
  • Location: Singapore
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #17 on: Thu, 11 July 2019, 06:47:19 »
this is an amazing product. I for one am excited and hope everyone everywhere gets in on it.
HHKB Pro 2 55g | TGR 910 55g Vintage Blacks | Apple Standard M0116 Orange Alps | Rosewill RK9000 Cherry MX Blues | Diverge TM 2 WKLears

Offline piit79

  • Posts: 319
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #18 on: Thu, 11 July 2019, 07:03:19 »
Through some basic math, we've figured that it's cheaper for everyone to ship from Taiwan.
...
Shipping to anywhere in the EU should easily be under $20, with VAT and customs and all (assuming you aren't in Italy)

OK, that sounds good. I was surprised that some GMK sets were actually $20+ cheaper from a proxy than directly + VAT, and that was even before considering the shipping cost. I guess they must have been getting a special price or something.

Also, I don't really like ISO, all my boards are ANSI, but that means I have lots of spare ISO Enters ;-)

Offline finalarcadia

  • Posts: 263
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #19 on: Thu, 11 July 2019, 07:29:31 »
No flex meme cuts on PCB? Unusable

Sent from my Pixel 3 using Tapatalk


Offline InvidiousIgnoramus

  • Posts: 377
  • Location: Columbia, SC
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #20 on: Thu, 11 July 2019, 07:31:40 »
Finally.
I long for the day when I find a beamspring. (At a not insane price)

Offline Xelus22

  • Posts: 10
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #21 on: Thu, 11 July 2019, 07:50:28 »

Offline smurkcity12

  • Posts: 60
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #22 on: Thu, 11 July 2019, 08:09:54 »
This is the finest thing that I never knew I needed. Luddit!

Offline lewisflude

  • Posts: 160
  • Location: London, UK
  • Hand Engineering
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #23 on: Thu, 11 July 2019, 10:05:37 »
Please add UK-ISO support







/s

Offline azhdar

  • Praise the AZERTY god
  • Posts: 2389
  • Location: France
  • 65% Enlighted
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #24 on: Thu, 11 July 2019, 10:09:34 »
in

Offline IOVERCALLHISTIOCYTES

  • Posts: 1151
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #25 on: Thu, 11 July 2019, 10:30:08 »
How else will I display my Rolling Bones big ass enter key skulls

Offline muretta

  • Posts: 1
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #26 on: Thu, 11 July 2019, 12:44:54 »
I am normally a lurker but this IC is too much for that. Please giv iS0


Offline MxDuder

  • Posts: 8
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #28 on: Thu, 11 July 2019, 13:48:52 »
This is a lovely thing you've done here.

Offline superdoedoe

  • Posts: 477
  • Location: Straya
  • ( ͡° ͜ʖ ͡°)
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #29 on: Thu, 11 July 2019, 19:19:06 »
Mad man

Sent from my SM-G970F using Tapatalk


Offline amuri99

  • Posts: 29
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #30 on: Thu, 11 July 2019, 20:14:55 »
it`s pretty! need it!~

Offline blacksimon

  • Thread Starter
  • Posts: 161
  • illuminati.works
    • illuminati.works
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #31 on: Fri, 12 July 2019, 03:29:16 »
Why a 1-key macropad? Why not a 2-key macropad that supports TWO ISO Enter keys, with the left one "upside down", to form a 2.75×2U rectangle?  :cool:

Why not an 12 key macropad where 12 iso enters come to form a much larger iso enter  ;D

Offline InvidiousIgnoramus

  • Posts: 377
  • Location: Columbia, SC
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #32 on: Fri, 12 July 2019, 03:42:11 »
Why a 1-key macropad? Why not a 2-key macropad that supports TWO ISO Enter keys, with the left one "upside down", to form a 2.75×2U rectangle?  :cool:

Why not an 12 key macropad where 12 iso enters come to form a much larger iso enter  ;D
We went over this. I already promised investment in this idea.
I long for the day when I find a beamspring. (At a not insane price)

Offline krey

  • Posts: 106
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #33 on: Fri, 12 July 2019, 23:46:27 »
I'm definitely gonna be on board for this.
Fjell | Klippe x2 | Acrylic Tofu | CA66 | Norbaforce | Majestouch 2 Ninja

Offline norb

  • Posts: 163
  • Location: ger
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #34 on: Sat, 13 July 2019, 07:38:36 »
i know this will happen


Offline Zurg Eon

  • Posts: 99
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #35 on: Sat, 13 July 2019, 20:41:51 »
Under switch 4xLEDs like the esc key on Think6.5 could have been nice.
(That's not a Think6.5 in the video, just a demo.)
« Last Edit: Sat, 13 July 2019, 20:43:29 by Zurg Eon »

Offline blacksimon

  • Thread Starter
  • Posts: 161
  • illuminati.works
    • illuminati.works
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #36 on: Sun, 14 July 2019, 05:01:13 »
Under switch 4xLEDs like the esc key on Think6.5 could have been nice.
(That's not a Think6.5 in the video, just a demo.)

Neat idea, but the pcb is quite packed already - maybe in the future some madman will make it happen though

Offline Zurg Eon

  • Posts: 99
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #37 on: Sun, 14 July 2019, 09:55:39 »
Neat idea, but the pcb is quite packed already - maybe in the future some madman will make it happen though
I'm unreasonably hyped for this either way.

Offline 2Cas

  • Posts: 11
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #38 on: Tue, 16 July 2019, 02:10:41 »
raw finish is0 please : )

Offline dantambok

  • Posts: 892
  • Location: Philippines
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #39 on: Tue, 16 July 2019, 04:03:42 »
WEW running a group buy to lose money! that's very smart!!  :thumb:
Best business strategy!!
I'm in!

NE f*cks avail
Stuff  I have
More
2x TGR Alice / TGR 910 RE / TGR 910 CE / TGR 910 VKC / 2x TGR Jane V2 / 2x Matrix 2.0 / Matrix 2.2 / Matrix 1.2OG / Lyn Whale v2 / Lyn EM7 v3 / DK Saver / 2x Keycult No. 1/60 / Hachi / Kyuu / Duck Orion V2 / 2x TGRxSinga Unikorn / QXP / TX1800 V1 /  JER80 / TMO50 / 2x 86u / ION i69 / LZ MP / 2x FMJ80 / TGR Jane V2 CE / Matrix Project F / IDB60 / is0  / MXSS / Atom TKL / Duck Viper v3 / HBCP / Noxary 280 / LZ Physix / FLX Virgo / Modern M0110 / Matrix 2.0 ADD / TGR Police

Coming soon --   Lynx50 / Matrix 2.0 ADD / 2x GSKT-00 / Noxary Vulcan Pro / 350 mimi / Fuji 65 / Haus65 / Valhalla / Dalco Mini


Offline hineybush

  • * Maker
  • Posts: 1529
  • Location: Pittsburgh, PA, USA
  • student of error
    • hineybush keyboards
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #40 on: Tue, 16 July 2019, 11:57:16 »
PCB RFQ submitted btw

Offline Okonomiyaki#2832

  • Posts: 511
  • Eating Okonomiyaki
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #41 on: Wed, 17 July 2019, 00:24:31 »
iNo

Offline superdoedoe

  • Posts: 477
  • Location: Straya
  • ( ͡° ͜ʖ ͡°)
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #42 on: Wed, 17 July 2019, 00:24:58 »
Nice - VIA?

Offline blacksimon

  • Thread Starter
  • Posts: 161
  • illuminati.works
    • illuminati.works
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #43 on: Wed, 17 July 2019, 00:36:01 »
Nice - VIA?

Depends if I can bribe Olivia with some rose gold and <2s and hihihihihis

Offline dantambok

  • Posts: 892
  • Location: Philippines
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #44 on: Wed, 17 July 2019, 04:40:02 »
Nice - VIA?

Depends if I can bribe Olivia with some rose gold and <2s and hihihihihis

I wont buy if it's not VIA.  :( Will buy 2 if it is  :p
Stuff  I have
More
2x TGR Alice / TGR 910 RE / TGR 910 CE / TGR 910 VKC / 2x TGR Jane V2 / 2x Matrix 2.0 / Matrix 2.2 / Matrix 1.2OG / Lyn Whale v2 / Lyn EM7 v3 / DK Saver / 2x Keycult No. 1/60 / Hachi / Kyuu / Duck Orion V2 / 2x TGRxSinga Unikorn / QXP / TX1800 V1 /  JER80 / TMO50 / 2x 86u / ION i69 / LZ MP / 2x FMJ80 / TGR Jane V2 CE / Matrix Project F / IDB60 / is0  / MXSS / Atom TKL / Duck Viper v3 / HBCP / Noxary 280 / LZ Physix / FLX Virgo / Modern M0110 / Matrix 2.0 ADD / TGR Police

Coming soon --   Lynx50 / Matrix 2.0 ADD / 2x GSKT-00 / Noxary Vulcan Pro / 350 mimi / Fuji 65 / Haus65 / Valhalla / Dalco Mini


Offline funderburker

  • * Exquisite Elder
  • Posts: 1288
  • Location: Latvia, Riga
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #45 on: Wed, 17 July 2019, 09:39:55 »
Any artisan collabs? Rama x Simon :cool:
My boards: LAGOM 🐸-T | TMO50 FE | prototype TMOv2 | production TMOv2

Offline mrkantz

  • Posts: 194
  • Location: SD
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #46 on: Wed, 17 July 2019, 10:24:22 »
Yeah, definitely getting one of these.

Offline blacksimon

  • Thread Starter
  • Posts: 161
  • illuminati.works
    • illuminati.works
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #47 on: Wed, 17 July 2019, 23:12:34 »
Nice - VIA?

Depends if I can bribe Olivia with some rose gold and <2s and hihihihihis

I wont buy if it's not VIA.  :( Will buy 2 if it is  :p

You'll buy 2 anyways, nice try


Any artisan collabs? Rama x Simon :cool:

I got a firm "no" because they are iso racists  :p

Offline depletedvespene

  • Posts: 808
  • Location: Chile
  • Old, used-up vespene geyser.
    • Keyboard-related resources.
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #48 on: Thu, 18 July 2019, 08:03:22 »
I can't bite my tongue any longer. We NEED a dual version of this, with two ISO Enter keys, one upside down, to form a 2.75x2U rectangle (I said this before). But...

The left-side Enter key should have a large 0 legend and the right-side Enter key should have a large 1 legend.

See where this is going? :cool: :cool: :cool:

Offline norb

  • Posts: 163
  • Location: ger
Re: [IC] iS0 Avail! ISO macropad from illuminati keyboards
« Reply #49 on: Thu, 18 July 2019, 11:08:38 »
See where this is going? :cool: :cool: :cool:

i see this going into a direction where we end up crafting new molds for a 1u small iso enter and filling a 100% with it :eek: :p