Author Topic: Post Your Cerakoted Keyboards  (Read 5198 times)

0 Members and 1 Guest are viewing this topic.

Offline MMKB

  • Thread Starter
  • Posts: 437
  • Location: norcal
Post Your Cerakoted Keyboards
« on: Fri, 06 December 2019, 14:24:26 »
Time for a change
        

Offline MMKB

  • Thread Starter
  • Posts: 437
  • Location: norcal
Re: Post Your Cerakoted Keyboards
« Reply #1 on: Fri, 06 December 2019, 14:34:53 »
Khers' X60 in Bazooka Pink.

https://geekhack.org/index.php?topic=35864.msg2830336#msg2830336



Tyson's DMG-themed X60.

https://geekhack.org/index.php?topic=98153.msg2831652#msg2831652



Yet another X60 in Light Sand by yours truly.

        

Offline chayu

  • Posts: 8
Re: Post Your Cerakoted Keyboards
« Reply #2 on: Thu, 23 January 2020, 19:12:22 »
This is my Tofu in Polar Blue 234182-0

Offline wholypantalones

  • Posts: 759
  • Location: The Mitten
Re: Post Your Cerakoted Keyboards
« Reply #3 on: Thu, 23 January 2020, 21:34:02 »
Okee doke.

Mech27 proto - Cobalt Kinetics Slate




 
LZ CLS - Tungsten and satin aluminum





Noxary 268 - Semi gloss satin aluminum





LZ CLS - Satin mag and sandblasted weight



« Last Edit: Thu, 23 January 2020, 21:53:28 by wholypantalones »

Online LightningXI

  • * Elevated Elder
  • Posts: 3042
  • Location: New York
  • PPD
    • ArtisanMacro
Re: Post Your Cerakoted Keyboards
« Reply #4 on: Mon, 27 January 2020, 05:33:55 »
Okee doke.

Mech27 proto - Cobalt Kinetics Slate

Show Image


Show Image

 
LZ CLS - Tungsten and satin aluminum

Show Image


Show Image


Noxary 268 - Semi gloss satin aluminum

Show Image


Show Image


LZ CLS - Satin mag and sandblasted weight

Show Image


Show Image

The shop you're using does some really clean work. How much are these costing you and what kind of lead times do they have?
WANTED: Clacks, Artisans, Keysets, Vintage Cherry and Other Goodies

More
Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60 | Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | IBM 3278 (pending restoration) | KFE | TGR Jane v2 | TGR Jane v2 CE | Koala | iS0 | Norbatouch | KPad | Xeno | F62 Kishsaver | Keycult No.1/60 Rev. 1 | GSKT-00 Z | Jubi | Montage


Offline wholypantalones

  • Posts: 759
  • Location: The Mitten
Re: Post Your Cerakoted Keyboards
« Reply #5 on: Mon, 27 January 2020, 06:42:44 »
Okee doke.

Mech27 proto - Cobalt Kinetics Slate

Show Image


Show Image

 
LZ CLS - Tungsten and satin aluminum

Show Image


Show Image


Noxary 268 - Semi gloss satin aluminum

Show Image


Show Image


LZ CLS - Satin mag and sandblasted weight

Show Image


Show Image

The shop you're using does some really clean work. How much are these costing you and what kind of lead times do they have?

They usually charge about $80-ish for tkl with a two week lead time. Great guys and they do a great job, I had a good experience with them leading up to the last time I had my CLS redone, they put some dings in the bottom of the case (not really noticeable, but still there) and didn't seem to want to take responsibility for it when I asked what happened. I'd obviously recommend them, but there's no guarantee that your board won't get dinged.

Online LightningXI

  • * Elevated Elder
  • Posts: 3042
  • Location: New York
  • PPD
    • ArtisanMacro
Re: Post Your Cerakoted Keyboards
« Reply #6 on: Mon, 27 January 2020, 06:44:59 »
Okee doke.

Mech27 proto - Cobalt Kinetics Slate

Show Image


Show Image

 
LZ CLS - Tungsten and satin aluminum

Show Image


Show Image


Noxary 268 - Semi gloss satin aluminum

Show Image


Show Image


LZ CLS - Satin mag and sandblasted weight

Show Image


Show Image

The shop you're using does some really clean work. How much are these costing you and what kind of lead times do they have?

They usually charge about $80-ish for tkl with a two week lead time. Great guys and they do a great job, I had a good experience with them leading up to the last time I had my CLS redone, they put some dings in the bottom of the case (not really noticeable, but still there) and didn't seem to want to take responsibility for it when I asked what happened. I'd obviously recommend them, but there's no guarantee that your board won't get dinged.

Not bad! I will inquire further if/when the time comes to do so -- thanks for the details!
WANTED: Clacks, Artisans, Keysets, Vintage Cherry and Other Goodies

More
Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60 | Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | IBM 3278 (pending restoration) | KFE | TGR Jane v2 | TGR Jane v2 CE | Koala | iS0 | Norbatouch | KPad | Xeno | F62 Kishsaver | Keycult No.1/60 Rev. 1 | GSKT-00 Z | Jubi | Montage