« previous next »
Pages:  [1]     Go Down

Author Topic: dead keys after swapping to new switches  (Read 1498 times)

0 Members and 1 Guest are viewing this topic.

Offline smackmountain

  • Thread Starter
  • Posts: 6
dead keys after swapping to new switches
« on: Wed, 11 December 2019, 18:24:38 »
I'm new to the world of enthusiast keyboards.  That said, I recent'y got a Kira, swapped the trues it came with for some royal clears and now I have dead keys... already tried flashing to no avail.  Not having a backspace right now is killing me, the handful of other keys not working I can live with, but the backspace...  being new, thought I'd check here and see if there's some hints or advice some of you might want to share on how I might get this Kira back to normal.  Thanks!
Logged

Offline suicidal_orange

  • * Global Moderator
  • Posts: 4771
  • Location: England
Re: dead keys after swapping to new switches
« Reply #1 on: Wed, 11 December 2019, 18:46:19 »
Are you really confident in your desoldering abilities or did you lift some pads?  If you did you'll need to solder some jumper wires then the dead keys will come back to life.  Pictures of the back of the board will help with more specific advice, preferably with the trace lines visible in the shine from a light.  Hopefully it's not white...
Logged
120/100g linear Zealio R1  
GMK Hyperfuse
'Split everything' perfection   		MX Clear
SA Hack'd by Geeks     
EasyAVR mod

Offline smackmountain

  • Thread Starter
  • Posts: 6
Re: dead keys after swapping to new switches
« Reply #2 on: Wed, 11 December 2019, 19:03:47 »
The board is a hot swap board - stock Kira, by Input Club.  I'll pull the board and inspect it, I'm not bad with soldering if I need to do something, I have all the right tools.  Though, and because this is a hot swap board I'd rather exhaust all other options first, before soldering, whatever those options may be.
Logged

Offline Sifo

  • Alter
  • * Exquisite Elder
  • Posts: 7504
  • Location: #GOLDSPRINGS, #LEGITBALLIN
  • Illustrious
Re: dead keys after swapping to new switches
« Reply #3 on: Wed, 11 December 2019, 19:08:25 »
are you sure you didn't bend any pins?
Logged
I love Elzy

Offline smackmountain

  • Thread Starter
  • Posts: 6
Re: dead keys after swapping to new switches
« Reply #4 on: Wed, 11 December 2019, 19:14:24 »
I was until a few minutes ago - I have bent pins.  Oh wow, this is embarrassing.  Ok, so what I have going on now is a mix of royal clears and trues for the time being. lol, uhg.  Operator error - thanks for the replies folks, this is 100% on me.
Logged

Offline Sifo

  • Alter
  • * Exquisite Elder
  • Posts: 7504
  • Location: #GOLDSPRINGS, #LEGITBALLIN
  • Illustrious
Re: dead keys after swapping to new switches
« Reply #5 on: Wed, 11 December 2019, 19:22:21 »
Quote from: smackmountain on Wed, 11 December 2019, 19:14:24
I was until a few minutes ago - I have bent pins.  Oh wow, this is embarrassing.  Ok, so what I have going on now is a mix of royal clears and trues for the time being. lol, uhg.  Operator error - thanks for the replies folks, this is 100% on me.

just bend them back in place with a flat head
Logged
I love Elzy

Offline smackmountain

  • Thread Starter
  • Posts: 6
Re: dead keys after swapping to new switches
« Reply #6 on: Wed, 11 December 2019, 19:31:04 »
Good tip, I'll give that a try, a couple of them may be salvaged, hopefully all of them.   I should probably get a bag of extras for good measure regardless of how many I can bring back.
Logged
Pages:  [1]     Go Up
« previous next »