Author Topic: [GB] Igris V1: Cone Feet WKL TKL by invis (CANCELLED)  (Read 9413 times)

0 Members and 1 Guest are viewing this topic.

Offline iNViSiBiLiTi

  • Thread Starter
  • Posts: 199
[GB] Igris V1: Cone Feet WKL TKL by invis (CANCELLED)
« on: Wed, 02 December 2020, 00:18:51 »
Igris V1
Webstore is currently closed
Start: December 1st, End: December 23rd or when all 80 units are sold out

Ship Date: Shooting for July 1st, definitely going to update this when factory gives me better estimates

1 Case, 1 Pair of Cone Feet, 1 Hineybush H87A PCB (mini USB), 2 Plates included (Alu and Poly)

Price
  • 80 Units:
  • 40 Space Gray w/ red plate: $420 + Shipping
  • 20 Black w/ red plate: $420 + Shipping
  • 20 Red w/ black plate: $420 + Shipping
Note: Store accepts shopify's default credit payments and Paypal.  CONUS shipping is fixed, int is calculated by Shopify.  If you get charged $0 for shipping, please contact me, I will fix the shipping error, or manually invoice you.  Note, using Paypal includes a hefty transaction fee, upwards of me losing $13 per board.    Decided to turn off paypal payment.  I will honor buyers thus far.  People seem very dissuaded towards using paypal as a payment option because of the trouble it brings to group buys. 

PLEASE CHOOSE AN ENGRAVING OPTION FROM BELOW.  I CANNOT GAURANTEE YOU WILL RECEIVE WHAT YOU WANT IF YOU DO NOT ENTER A DISCOUNT CODE. 

Primary Engraving Option DISCOUNT CODE: DEFAULT ENGRAVING

Secondary Engraving Option DISCOUNT CODE: IGRIS ENGRAVING

No Engraving Optional DISCOUNT CODE: NO ENGRAVING

Prototype Pictures in Space Gray and Red





Technical Specs & Information
  • WKL TKL
  • 0.25mm engraving
  • 20mm tall flat keyboard with screw in cone feet to adjust the angle. 
  • Top Mount only (not compatible with gummy-worm style gasket)
  • 2mm polycarbonate plate and 1.5mm aluminum plate Koala/Whale/Jane V2 compatible plate
  • 15 mm feet = 8
  • H87A compatible
  • 6063 aluminum
  • Available in Space Gray, Red, and Black

Buy here: https://invis-board.myshopify.com/

Special Thanks to Biso, Dale, Ip, Velvet, Shaolin, Alessio for encouraging me to pursue cone feet, and special thanks to Hiney, Pwner, and Zekkin for advice in CAD.  Shoutout to #kb-kustoms. 

More Prototype Pictures in Space Gray with NCR dyesubs courtesy of Maxf






Changes from Prototype to production model:
  • Internal rails to try to prevent warping
  • Moved bumpon locations
  • Alignment rails changed to alignment pins
  • I like black colored screws, you guys like black colored screws? I got some regular steel screws if you want that instead, pm me.
  • Fixing gap that makes installing plate harder, plate should be aligned properly now

Buy here: https://invis-board.myshopify.com/
« Last Edit: Tue, 22 December 2020, 16:38:41 by iNViSiBiLiTi »
60%: Prophet, GSKT-00, Weaven

TKL: TGR Jane V2, Jane V2 CE, KFE, Noxary 280 S, Acrylic Unicorn, Mira SE, Igris V1

Bulgogi Board (VA104M)

Offline iNViSiBiLiTi

  • Thread Starter
  • Posts: 199
Re: Igris V1: Cone Feet WKL TKL by invis
« Reply #1 on: Wed, 02 December 2020, 00:19:29 »
I'm supposed to reserve this for update yeah? yeah.

Hi all, if you are an international buyer ordering more than 1 board, Shopify will not calculate double the volume I'm afraid.  I'll need to invoice extra for the additional shipping invoice.  I'm sorry for the error, I did not think Shopify would handle shipping this way.
« Last Edit: Wed, 02 December 2020, 13:29:08 by iNViSiBiLiTi »
60%: Prophet, GSKT-00, Weaven

TKL: TGR Jane V2, Jane V2 CE, KFE, Noxary 280 S, Acrylic Unicorn, Mira SE, Igris V1

Bulgogi Board (VA104M)

Offline HoffmanMyster

  • HOFF, smol MAN OF MYSTERY
  • * Senior Moderator
  • Posts: 10821
  • Location: WI
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #2 on: Wed, 02 December 2020, 09:29:12 »
Approved (and updated subject to include [GB] tag) :thumb:

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11677
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #3 on: Wed, 02 December 2020, 09:52:50 »
support my man
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Qlavier Ti/Acryl Alice (lost in mail T_T) | Revo One | z | Keycult No. 1

if you're actually reading other people's posts on geekhack in 2020 you're doing something wrong

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos | "Is Linkshine our Nixon?" -NAV (fk u) | "Puddsy is the puddsy of keebs" -ns90

Offline jorj_mk

  • Posts: 137
  • Location: UK
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #4 on: Wed, 02 December 2020, 10:27:58 »
always nice to see throwbacks. gl w/ gb  :thumb:
🍒

Offline Ja3_420

  • Posts: 44
  • Location: Netherlands
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #5 on: Wed, 02 December 2020, 11:05:53 »
invis tkl so lit

Offline Gepriester

  • Posts: 32
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #6 on: Wed, 02 December 2020, 11:29:43 »
Awesome board! And thanks for doing international shipping :D

Btw. is there a chance for you to share the plate files? I'd really love to cut my own ISO plate for it.

Offline treeleaf64

  • Posts: 1102
  • Location: In the depths of the forest
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #7 on: Wed, 02 December 2020, 11:58:08 »
Yay
Leader of the Gateron gang

Disclaimer:
May display immature behavior
May talk in third person

Treeleaf's Youtube Channel!
https://www.youtube.com/channel/UCAVQHinK0K-AjLlbc7MZjfA?view_as=subscriber

Offline whykayallday

  • Posts: 25
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #8 on: Wed, 02 December 2020, 12:03:24 »
Just a quick question: it looks like the plate is compatible with jane v2 based on the max's build stream. Can you confirm?

Offline keyboardkrill

  • Posts: 39
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #9 on: Wed, 02 December 2020, 12:08:39 »
Just a quick question: it looks like the plate is compatible with jane v2 based on the max's build stream. Can you confirm?

From technical specs above:

"2mm polycarbonate plate and 1.5mm aluminum plate Koala/Whale/Jane V2 compatible plate"

Offline whykayallday

  • Posts: 25
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #10 on: Wed, 02 December 2020, 12:11:54 »
Just a quick question: it looks like the plate is compatible with jane v2 based on the max's build stream. Can you confirm?

From technical specs above:

"2mm polycarbonate plate and 1.5mm aluminum plate Koala/Whale/Jane V2 compatible plate"

Shoot. Didn't see that. Thank you!

Offline rokon07

  • Posts: 7
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #11 on: Wed, 02 December 2020, 13:01:46 »
Black and space grey out of stock so bought Red. Now have to wait; looking forward to July lol. Oh damn, I didn't see I had to pick the right plate. Can I still change the color by contacting you?
« Last Edit: Wed, 02 December 2020, 13:10:39 by rokon07 »

Offline yoshifan151

  • Posts: 3
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #12 on: Wed, 02 December 2020, 13:18:26 »
Picked up one in black, is there any chance to get the other cone feet? Or only the 15mm ones?

Offline iNViSiBiLiTi

  • Thread Starter
  • Posts: 199
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #13 on: Wed, 02 December 2020, 13:27:33 »
Picked up one in black, is there any chance to get the other cone feet? Or only the 15mm ones?

Hi, kbdfans sells cone feet that use M4 screws, those should work. 

As for the gb, the prototype feet will be used for the final product. 
60%: Prophet, GSKT-00, Weaven

TKL: TGR Jane V2, Jane V2 CE, KFE, Noxary 280 S, Acrylic Unicorn, Mira SE, Igris V1

Bulgogi Board (VA104M)

Offline yoshifan151

  • Posts: 3
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #14 on: Wed, 02 December 2020, 13:33:01 »
Picked up one in black, is there any chance to get the other cone feet? Or only the 15mm ones?

Hi, kbdfans sells cone feet that use M4 screws, those should work. 

As for the gb, the prototype feet will be used for the final product.

Good to know, thank you!

Offline iNViSiBiLiTi

  • Thread Starter
  • Posts: 199
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #15 on: Wed, 02 December 2020, 13:40:19 »
Hi all, if you are an international buyer ordering more than 1 board, Shopify will not calculate double the volume I'm afraid.  I'll need to invoice extra for the additional shipping invoice.  I'm sorry for the error, I did not think Shopify would handle shipping this way.
60%: Prophet, GSKT-00, Weaven

TKL: TGR Jane V2, Jane V2 CE, KFE, Noxary 280 S, Acrylic Unicorn, Mira SE, Igris V1

Bulgogi Board (VA104M)

Offline rokon07

  • Posts: 7
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #16 on: Wed, 02 December 2020, 13:47:49 »
Hey iNViSiBiLiTi, I don't know if you saw my comment earlier. But I made an order for red thinking the black and space grey are out of stock because I didn't change the plate color. I would like the space grey board with Ingris text engraving instead. would you be able to change my order? I have emailed you to youngkeyboards@gmail.com with my order number. Thanks

Offline iNViSiBiLiTi

  • Thread Starter
  • Posts: 199
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #17 on: Wed, 02 December 2020, 14:39:08 »
Hey iNViSiBiLiTi, I don't know if you saw my comment earlier. But I made an order for red thinking the black and space grey are out of stock because I didn't change the plate color. I would like the space grey board with Ingris text engraving instead. would you be able to change my order? I have emailed you to youngkeyboards@gmail.com with my order number. Thanks

Yes, I've cancelled the original order and reinvoiced you.  I can't change the order manually since a discount code was applied. 
60%: Prophet, GSKT-00, Weaven

TKL: TGR Jane V2, Jane V2 CE, KFE, Noxary 280 S, Acrylic Unicorn, Mira SE, Igris V1

Bulgogi Board (VA104M)

Offline rokon07

  • Posts: 7
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #18 on: Wed, 02 December 2020, 14:45:00 »
Hey iNViSiBiLiTi, I don't know if you saw my comment earlier. But I made an order for red thinking the black and space grey are out of stock because I didn't change the plate color. I would like the space grey board with Ingris text engraving instead. would you be able to change my order? I have emailed you to youngkeyboards@gmail.com with my order number. Thanks

Yes, I've cancelled the original order and reinvoiced you.  I can't change the order manually since a discount code was applied.

Thanks for change; new invoice paid.

Offline PigeonsLikeBread

  • Posts: 27
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #19 on: Wed, 02 December 2020, 14:45:47 »
GLWGB, in for a red one :)

Just a heads up, the h87a is mini usb, not micro.
Looking to buy a KMAC Happy
Please PM me :D

Offline pr0ximity

  • Posts: 2602
  • Location: Vacationland
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #20 on: Wed, 02 December 2020, 14:55:54 »
Invis so hot right now
| Flickr | Current: Koala/GSKT-00/JaneV2CE/Whale/Pro1/356mini/1390120/F107/3101

Offline iNViSiBiLiTi

  • Thread Starter
  • Posts: 199
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #21 on: Wed, 02 December 2020, 15:13:35 »
GLWGB, in for a red one :)

Just a heads up, the h87a is mini usb, not micro.

Oops, brain fart.  Thanks for the correction.
60%: Prophet, GSKT-00, Weaven

TKL: TGR Jane V2, Jane V2 CE, KFE, Noxary 280 S, Acrylic Unicorn, Mira SE, Igris V1

Bulgogi Board (VA104M)

Offline PigeonsLikeBread

  • Posts: 27
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #22 on: Wed, 02 December 2020, 15:19:12 »
Oops, brain fart.  Thanks for the correction.

No problem. BTW, does the PC plate have the same flex cuts as the aluminum plate? I know the prototype PC plate was different, but I wasn't sure what the production version would be like.
Looking to buy a KMAC Happy
Please PM me :D

Offline iNViSiBiLiTi

  • Thread Starter
  • Posts: 199
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #23 on: Wed, 02 December 2020, 15:26:39 »
Oops, brain fart.  Thanks for the correction.

No problem. BTW, does the PC plate have the same flex cuts as the aluminum plate? I know the prototype PC plate was different, but I wasn't sure what the production version would be like.

Ah, I've realized I've never posted pictures of the polycarbonate plate.  The flex cuts are not there, there are only small cutouts near the spacebar.  The polycarbonate plates are clear plastic sandblasted to be a frosted finish. 

60%: Prophet, GSKT-00, Weaven

TKL: TGR Jane V2, Jane V2 CE, KFE, Noxary 280 S, Acrylic Unicorn, Mira SE, Igris V1

Bulgogi Board (VA104M)

Offline chamelemon_64

  • Posts: 29
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #24 on: Wed, 02 December 2020, 16:33:20 »
GLWGB invis

Offline iNViSiBiLiTi

  • Thread Starter
  • Posts: 199
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #25 on: Wed, 02 December 2020, 18:13:15 »
Boards are not out of stock, I've removed the plate color option.  There was never an intention to mix and match the plate colors.  I've chosen specific plate colors for specific boards to make sure QC happens easier. 
« Last Edit: Thu, 03 December 2020, 14:51:21 by iNViSiBiLiTi »
60%: Prophet, GSKT-00, Weaven

TKL: TGR Jane V2, Jane V2 CE, KFE, Noxary 280 S, Acrylic Unicorn, Mira SE, Igris V1

Bulgogi Board (VA104M)

Offline packman86

  • Posts: 376
  • Morning Coffee
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #26 on: Fri, 04 December 2020, 12:11:14 »
Great price for anyone looking to get a quality WKL TKL.
TGR Jane V2 | TGR Jane V2 CE | TGR Alice | TGR 910 | TGR x Singa UNIKORN 60 | Matrix 8XV 2.0 Korea Version | Matrix 8XV 2.0add | LZ CLS s h x | Duck Jetfire | TX-CP | QXP | Noxary X65 | RAMA M60-A

Offline Mcnos

  • Posts: 1151
    • GMK Fuyu
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #27 on: Fri, 04 December 2020, 13:13:43 »
Make cone feet great again

Offline trg1234

  • Posts: 121
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #28 on: Fri, 04 December 2020, 14:01:15 »
I love invis and his board! glwgb

Online hkhawk

  • Posts: 146
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #29 on: Sun, 06 December 2020, 21:27:05 »
I assume the red is going to be a similar color to the plate in the proto?

Offline iNViSiBiLiTi

  • Thread Starter
  • Posts: 199
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #30 on: Tue, 08 December 2020, 16:46:24 »
I assume the red is going to be a similar color to the plate in the proto?

Yup, Factory recommended me use their stock red, and so did my friends.  The red is pretty famous in the community fwiw. 
60%: Prophet, GSKT-00, Weaven

TKL: TGR Jane V2, Jane V2 CE, KFE, Noxary 280 S, Acrylic Unicorn, Mira SE, Igris V1

Bulgogi Board (VA104M)

Offline iNViSiBiLiTi

  • Thread Starter
  • Posts: 199
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #31 on: Wed, 16 December 2020, 22:20:19 »
Hi guys, so I've only planned for this gb to go on for the next week, till the 23rd.  We're about 22/80 orders in.  Most likely looking forward to cancelling the gb if I don't miraculously get ~60 spots.  I'll be getting ready for the refunds when the week is over.  Hoping Shopify and Paypal comply. 
60%: Prophet, GSKT-00, Weaven

TKL: TGR Jane V2, Jane V2 CE, KFE, Noxary 280 S, Acrylic Unicorn, Mira SE, Igris V1

Bulgogi Board (VA104M)

Offline lemongrassii

  • Posts: 18
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #32 on: Thu, 17 December 2020, 03:20:19 »
That's a shame, was really looking forward to this one. But oh well, here's hoping for a christmas miracle still ;D

DOLINGER 2017 LEAF60 280 IDB60 8XV1.2OG  ORION V3 (GSKT-00) RF87U HHKBP2

Offline noorejji

  • Posts: 246
  • Location: yurop
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #33 on: Thu, 17 December 2020, 07:32:53 »
Do a version without the feet.
« Last Edit: Thu, 17 December 2020, 07:36:16 by noorejji »

Offline treeleaf64

  • Posts: 1102
  • Location: In the depths of the forest
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #34 on: Thu, 17 December 2020, 11:11:21 »
Do a version without the feet.
Cone feet are perfectly fine and i think these ones are removable if you dont like them
Leader of the Gateron gang

Disclaimer:
May display immature behavior
May talk in third person

Treeleaf's Youtube Channel!
https://www.youtube.com/channel/UCAVQHinK0K-AjLlbc7MZjfA?view_as=subscriber

Offline catamscott

  • Posts: 227
  • Location: Oregon
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #35 on: Thu, 17 December 2020, 15:25:48 »
can't believe there are only 22 sold so far, this is such a nice board and a breath of fresh air in the current keyboard landscape.

Offline noorejji

  • Posts: 246
  • Location: yurop
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #36 on: Thu, 17 December 2020, 17:28:39 »
can't believe there are only 22 sold so far, this is such a nice board and a breath of fresh air in the current keyboard landscape.

GB's with classic, high quality TKL's always sell out. Always. There's nothing fresh about cone feet - that's the point, and also the problem. It's a shame to see invisibiliti's work not go anywhere.

Offline iNViSiBiLiTi

  • Thread Starter
  • Posts: 199
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #37 on: Thu, 17 December 2020, 20:13:36 »
Do a version without the feet.

like a regular angled keyboard?
60%: Prophet, GSKT-00, Weaven

TKL: TGR Jane V2, Jane V2 CE, KFE, Noxary 280 S, Acrylic Unicorn, Mira SE, Igris V1

Bulgogi Board (VA104M)

Offline ogp3

  • Posts: 49
  • Location: Massachusetts, USA
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #38 on: Thu, 17 December 2020, 21:17:14 »
If I was in a better financial place I would've definitely joined this buy! Really sad to see that this gb isn't getting the love it deserves  :( All the best to you iNViS, hope to see maybe a revived run in the future :)

Offline noorejji

  • Posts: 246
  • Location: yurop
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #39 on: Thu, 17 December 2020, 21:23:10 »
Do a version without the feet.

like a regular angled keyboard?
Yes.

Respect to you anyway if you're staying true to your vision.

Offline dom

  • Posts: 162
  • Location:
  • XOXO
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #40 on: Fri, 18 December 2020, 04:08:33 »
GLWGB! The price is really excellent!

BTW: I would update the main GB links from "https://invis-board.myshopify.com/" to "https://invis-board.myshopify.com/products/igris-v1" because some people can think this GB is over already! GL! :)

« Last Edit: Fri, 18 December 2020, 04:10:05 by dom »

Offline LazyJackfruit

  • Posts: 9
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #41 on: Sat, 19 December 2020, 13:30:20 »
And here I thought my hunt for a TKL was over. If a second version were to run in the future, consider me interested.

I could definitely see the board hitting MOQ if it were to tailor towards more mainstream elements in TKL designs nowadays. I'll definitely keep an eye out for invisibiliti's boards now, in any case.

Offline iNViSiBiLiTi

  • Thread Starter
  • Posts: 199
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #42 on: Sun, 20 December 2020, 11:39:22 »
And here I thought my hunt for a TKL was over. If a second version were to run in the future, consider me interested.

I could definitely see the board hitting MOQ if it were to tailor towards more mainstream elements in TKL designs nowadays. I'll definitely keep an eye out for invisibiliti's boards now, in any case.

Thank you for the kind words but unfortunately, I think that's the nature of this kind of board.  If I wanted more mainstream elements, it wouldn't have ended up looking like this.  It just seems the interest for this old school aesthetic is just not there.  I can see myself selling 30 units, but I'd reiterate the price is not cost saving whatsoever, especially at the factory I've chosen. 
60%: Prophet, GSKT-00, Weaven

TKL: TGR Jane V2, Jane V2 CE, KFE, Noxary 280 S, Acrylic Unicorn, Mira SE, Igris V1

Bulgogi Board (VA104M)

Offline yuejia

  • Posts: 71
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #43 on: Mon, 21 December 2020, 20:25:03 »
Its really Nice!! That is so beautiful!!

Offline iNViSiBiLiTi

  • Thread Starter
  • Posts: 199
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #44 on: Tue, 22 December 2020, 14:27:10 »
I've decided to cancel the group buy a day early and started to process the refunds.  Most of you were from Geekhack, for those who ordered from Reddit or Discord, I'll reach out to you via other means.  Sorry to everyone that was excited to join.  Hope you guys have a Merry Christmas and happy New Years.  Happy Holidays ya'all, stay warm and safe during COVID!
« Last Edit: Tue, 22 December 2020, 14:37:13 by iNViSiBiLiTi »
60%: Prophet, GSKT-00, Weaven

TKL: TGR Jane V2, Jane V2 CE, KFE, Noxary 280 S, Acrylic Unicorn, Mira SE, Igris V1

Bulgogi Board (VA104M)

Offline PigeonsLikeBread

  • Posts: 27
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #45 on: Tue, 22 December 2020, 14:44:22 »
:(
Looking to buy a KMAC Happy
Please PM me :D

Offline Full

  • Posts: 136
  • Location: Norway
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #46 on: Tue, 22 December 2020, 15:05:31 »
Got my refund, very sad to hear, I hope you can find a way to run this board in the futura! Merry christmas!

Offline Aiwanei

  • Posts: 37
Re: [GB] Igris V1: Cone Feet WKL TKL by invis
« Reply #47 on: Tue, 22 December 2020, 15:27:29 »
Sad to get refund by I completely understand, I hope this board will someday get a second chance.

Offline Gepriester

  • Posts: 32
Re: [GB] Igris V1: Cone Feet WKL TKL by invis (CANCELLED)
« Reply #48 on: Tue, 22 December 2020, 17:57:13 »
Thanks so much for your work anyway!

Offline keyboardkrill

  • Posts: 39
Re: [GB] Igris V1: Cone Feet WKL TKL by invis (CANCELLED)
« Reply #49 on: Tue, 22 December 2020, 22:49:59 »
Major bummer, but that's the way life is sometimes. Look forward to your next project Invis.