I have had an Atreus62 with Gateron Browns for over four years as my daily driver. I like it a lot. I do however have a problem with one of my modifier keys apparently not returning to normal after being hit. It doesn't seem to happen every time, just under certain circumstances that I can't pinpoint. I've included my entire keymap.c file. The modifier is the MO(_NUM). I thought all I needed to do was use KC_TRNS in this position in all the other layers, but maybe it's not enough?
As an example of what happens, sometimes I find I have used MO(_NUM) and the volume control is displayed on screen, suggesting that KC_VOLU is active (that is located in the NUM layer where KC_INS is on my base layer).
I guess it could be a hardware problem like a sticky key, but I thought I'd ask here for pointers on QMK before I rip the keyboard apart and clean it. Any help much appreciated!
ST
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_DEFAULT] = { /* base layer */
{ KC_ESC, LCTL(KC_C), LCTL(KC_X), LCTL(KC_V), LCTL(KC_F), LCTL(KC_Z), KC_TRNS, S(KC_QUOT), KC_SLSH, KC_LPRN, KC_RPRN, KC_MINS, KC_EQL },
{ KC_TAB, KC_Q, KC_W, KC_D, KC_F, KC_K, KC_TRNS, KC_J, KC_U, KC_R, KC_L, KC_QUOT, KC_SCLN },
{ KC_LCTL, KC_A, KC_S, KC_E, KC_T, KC_G, KC_TRNS, KC_Y, KC_N, KC_I, KC_O, KC_H, KC_LCTL },
{ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_BSPC, KC_P, KC_M, KC_COMM, KC_DOT, KC_QUES, KC_RSFT },
{ KC_TRNS, KC_LGUI, KC_INS, KC_LALT, MO(_NAV), KC_DELT, KC_ENT, KC_SPC, MO(_NUM), KC_LALT, TG(_NUM), KC_CAPS, KC_APP }
},
[_NAV] = {
{ TO(_DEFAULT), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11 },
{ KC_TRNS, KC_F12, F(5), F(8), F(6), KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_UP, KC_END, KC_LBRC, KC_RBRC },
{ KC_LCTL, KC_TRNS, F(3), KC_TRNS, F(4), KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_LCTL },
{ KC_LSFT, KC_TRNS, F(1), F(7), F(2), KC_TRNS, KC_TRNS, LALT(KC_ENT), KC_PGUP, KC_DOWN, KC_PGDN, KC_TRNS, KC_TRNS },
{ TO(_RESET), KC_LGUI, KC_TRNS, KC_LALT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS }
},
[_NUM] = {
{ KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_TRNS, KC_AMPERSAND, KC_7, KC_8, KC_9, KC_SLSH, KC_RPRN },
{ KC_TAB, KC_TILD, KC_GRV, KC_SCLN, KC_COLN, KC_UNDS, KC_TRNS, KC_CIRC, KC_4, KC_5, KC_6, KC_ASTR, KC_TRNS },
{ KC_LCTL, KC_LCBR, KC_RCBR, KC_LBRC, KC_RBRC, KC_BSLS, KC_TRNS, KC_PIPE, KC_1, KC_2, KC_3, KC_MINS, KC_LCTL },
{ KC_LSFT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS , KC_BSPC, KC_SLSH, KC_0, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS },
{ KC_VOLD, KC_MUTE, KC_VOLU, KC_MPLY, KC_MPRV, KC_MNXT, KC_ENT, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS }
},
[_RESET] = {
{ TO(_DEFAULT), KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO },
{ F(9) , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO },
{ F(10) , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO },
{ KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO },
{ KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , RESET }
}
};
