Author Topic: Ryzen 7900x... Idle at 85 Degrees?  (Read 1240 times)

0 Members and 1 Guest are viewing this topic.

Offline Naweo

  • Thread Starter
  • Posts: 199
Ryzen 7900x... Idle at 85 Degrees?
« on: Sun, 07 April 2024, 05:40:07 »
Hey there

I am runing an aircooled (be quiet double tower air cooling) with arctic silver 5 thermal paste, on a less than 2 year old PC build, windows 11. PC is effectively clean of dust.

My PC in a relatively idle state, utilizing 10-20% of CPU usage, just having tabs open, has high temps.

I tried to monitor on hardwaremonitor and HWinfo.

In both cases, it seems my PC is running incredibly hot for no apparent reason. I tried to re-apply thermal paste and I usually do this without issues. Before and after thermal paste application, temps are still unsually high.

The CPU is default settings, no overclock.

I am particularly concerned with the package temp and the CCD temp. The computers max temperature readings was without any stress tests on the CPU, literally just opening tabs, surfing internet, etc.

Any other info I need to provide? Do I need to get a new CPU or even see if I can get it exchanged?
« Last Edit: Sun, 07 April 2024, 05:51:47 by Naweo »

Offline Leslieann

  • * Elevated Elder
  • Posts: 4518
Re: Ryzen 7900x... Idle at 85 Degrees?
« Reply #1 on: Sun, 07 April 2024, 21:52:30 »
Newer cpus are set to just run all out until near max temp.
If this is new-ish behavior though for yours it could be a bad update or driver.
Novelkeys NK65AE w/62g Zilents/39g springs
62g Zilents/lubed/Novelkeys 39g springs, HK Gaming Thick PBT caps, Netdot Gen10 magnetic cable, pic
| Filco MJ2 L.E. Vortex Case, Jailhouse Blues, heavily customized
Vortex case squared up/blasted finish removed/custom feet/paint/winkey blockoff plate, HID Liberator, stainless steel universal plate, 3d printed adapters, Type C, Netdot Gen10 magnetic cable, foam sound dampened, HK Gaming Thick PBT caps (o-ringed), Cherry Jailhouse Blues w/lubed/clipped Cherry light springs, 40g actuation
w/ Kailh Purple Pros/lubed/Novelkeys 39g springs, HK Gaming Thick PBT caps, Netdot Gen10 Magnetic cable
| PF65 3d printed 65% w/LCD and hot swap
Box Jades, Interchangeable trim, mini lcd, QMK, underglow, HK Gaming Thick PBT caps, O-rings, Netdot Gen10 magnetic cable, in progress link
| Magicforce 68
MF68 pcb, Outemu Blues, in progress
| YMDK75 Jail Housed Gateron Blues
J-spacers, YMDK Thick PBT, O-rings, SIP sockets
| KBT Race S L.E.
Ergo Clears, custom WASD caps
| Das Pro
Costar model with browns
| GH60
Cherry Blacks, custom 3d printed case
| Logitech Illumininated | IBM Model M (x2)
Definitive Omron Guide. | 3d printed Keyboard FAQ/Discussion