Author Topic: Double shot replacements ROUND THREE: Vote for Kits & Quantities! (Read 1069373 times)

Ekaros · « **Reply #1150 on:** Thu, 24 February 2011, 16:49:27 »

Quote from: digitalleftovers;300502

Hi 7bit,

I was looking through the sticky for info on shipping, but didn't see any estimates. I thought I saw estimates for CONUS a few weeks ago, but I may have been looking at a different round of orders... Could you direct me to this information, or will I just receive info when I make my order? Thank you for doing this!

Here:
Please notice, that up to around 250 pieces can be shipped in one box.

Shipping costs:
USA $5.25
CAN/MEX $12
World $14
Moon $50,000 [1]

[1] shipping option might be not available.

7bit · « **Reply #1151 on:** Thu, 24 February 2011, 16:52:08 »

Quote from: digitalleftovers;300502

Hi 7bit,

I was looking through the sticky for info on shipping, but didn't see any estimates. I thought I saw estimates for CONUS a few weeks ago, but I may have been looking at a different round of orders... Could you direct me to this information, or will I just receive info when I make my order? Thank you for doing this!

Do you mean the shipping costs?

USA $5.25
CAN/MEX $12
World $14
Moon $50,000

Or do you mean this thread:
Do u guys want KBC colored keycaps

manfaux · « **Reply #1152 on:** Thu, 24 February 2011, 16:59:53 »

Quote from: 7bit;300496

I think they match Cherry caps better than Filcos. But they are a bit different.

Got it, thanks for clarifying! I'm gonna pick up a set of colored blank modifiers and I was worried that they are gonna stick out like snaggleteeth on my Cherry.

Evil_Spork · « **Reply #1153 on:** Thu, 24 February 2011, 17:14:08 »

What's the status on Trollface keys?
Are we going to get those? My vote/order didn't include the trollface key despite it being in my original PM.

digitalleftovers · « **Reply #1154 on:** Thu, 24 February 2011, 17:55:19 »

Quote from: 7bit;300506

Do you mean the shipping costs?

USA $5.25
CAN/MEX $12
World $14
Moon $50,000

Or do you mean this thread:
Do u guys want KBC colored keycaps

That is exactly what I was looking for. Thank you!

hoggy · « **Reply #1155 on:** Fri, 25 February 2011, 01:19:31 »

I've got a bit of space left over, would it be possible to add a few more items from signature plastics?

They've got red esc keys in stock for $1.50 (http://www.keycapsdirect.com/redesc.php)

I'm also after some blanking tiles. I can't find a reference to them on the site though, I'm just assuming they make them...

.

... and some relegendable keys as well.

If it's too much to deal with, I'll understand.

7bit · « **Reply #1156 on:** Fri, 25 February 2011, 02:26:34 »

Quote from: hoggy;300669

I've got a bit of space left over, would it be possible to add a few more items from signature plastics?

They've got red esc keys in stock for $1.50 (http://www.keycapsdirect.com/redesc.php)

I'm also after some blanking tiles. I can't find a reference to them on the site though, I'm just assuming they make them...
Show Image
.

... and some relegendable keys as well.

If it's too much to deal with, I'll understand.

I will put these on my list for Monaday (when Melissa is back in her office). Stuff which is in stock can always be ordered along the other stuff.

Do you have a picture how these blind caps look like from below?

7bit · « **Reply #1157 on:** Fri, 25 February 2011, 04:18:14 »

Now that the invoice stuff became plain sailing and iMav became the richest GeekHacker, I've got time to take care of the SVG-files whcih still need improvement to meet production requirements:

Line thickness is 0.2mm, but it would be appreciated if it where something like 0.3 or 0.35mm.
Gap between islands or lines must be 0.5mm wide.

I modified the 'keyboard-collecting escapee' already. This should work out. I need the SVG file (only the white part for sure):

In the graphic above, 1pixel is 1/100mm.

@Bugfix: I would really appreciate if you could do this once more!

Next to come: Awesome face.

hoggy · « **Reply #1158 on:** Fri, 25 February 2011, 04:58:40 »

Quote from: 7bit;300682

I will put these on my list for Monaday (when Melissa is back in her office). Stuff which is in stock can always be ordered along the other stuff.

Do you have a picture how these blind caps look like from below?

Thanks!

Hope these pictures are what you need, if not, just let me know.

They are used on Access-IS keyboards and I think they appear on the odd Desko as well.

7bit · « **Reply #1159 on:** Fri, 25 February 2011, 05:11:15 »

It doesn't need much tweaking. Only pushing around the shapes a bit. The left eye needs to be a bit more to the right and the mouth a bit up.

Again, 1pixel=1/100 mm.

9.04mm x 10.84mm is the size into which the insert mold graphic must fit.

This is how it should look like:

Smaller sample:

Next to come: Awesome white on red (which will be kind of a pain!)

7bit · « **Reply #1160 on:** Fri, 25 February 2011, 05:14:11 »

Quote from: hoggy;300705

Thanks!

Hope these pictures are what you need, if not, just let me know.

They are used on Access-IS keyboards and I think they appear on the odd Desko as well.

Show Image

Show Image

I will ask about these.

How many will you take and which colors?

Ekaros · « **Reply #1161 on:** Fri, 25 February 2011, 05:19:46 »

Quote from: 7bit;300709

I will ask about these.

How many will you take and which colors?

Hmm, wouldn't it be soon easier to ask for their whole catalog?

Could they even have a list what they have available and what in general they can make...

hoggy · « **Reply #1162 on:** Fri, 25 February 2011, 05:29:16 »

I'd be interested in 50 to 100 of the black and around 30 of the white - depending on price and availability of course.

This must be turning into a full time job...

bugfix · « **Reply #1163 on:** Fri, 25 February 2011, 05:32:04 »

The escapee

I simply traced the png you provided, hope that was right.

And the face, slightly tweaked.

7bit · « **Reply #1164 on:** Fri, 25 February 2011, 05:39:43 »

Quote from: bugfix;300715

The escapee
I simply traced the png you provided, hope that was right.

No, it is not right. When I remove the white stuff there is the insular missing (formed by the arm, keyboard and body).

Quote from: bugfix;300715

And the face, slightly tweaked.

bugfix · « **Reply #1165 on:** Fri, 25 February 2011, 05:40:20 »

Quote from: 7bit;300717

`

hm?

calavera · « **Reply #1166 on:** Fri, 25 February 2011, 05:45:49 »

Just curious, are there still lots of people that didn't get an invoice or is it just me?

All I receive is updates on the votes.

7bit · « **Reply #1167 on:** Fri, 25 February 2011, 05:47:54 »

Quote from: bugfix;300718

hm?

Could you please use this file as a base for the Awesome Yellow:

7bit · « **Reply #1168 on:** Fri, 25 February 2011, 05:50:48 »

Quote from: calavera;300719

Just curious, are there still lots of people that didn't get an invoice or is it just me?
All I receive is updates on the votes.

Strange. In theory the last invoice went out on Feb 21.

I will include you to the list and send a new one today.

bugfix · « **Reply #1169 on:** Fri, 25 February 2011, 05:53:07 »

Now better?

http://philblog.de/dl/escapee.svg
http://philblog.de/dl/awesome_black_on_yellow.svg

Ekaros · « **Reply #1170 on:** Fri, 25 February 2011, 05:55:46 »

Quote from: bugfix;300723

Now better?

http://philblog.de/dl/escapee.svg
http://philblog.de/dl/awesome_black_on_yellow.svg

Hmm, just notice does the thin line between body and head belong there?

bugfix · « **Reply #1171 on:** Fri, 25 February 2011, 05:56:22 »

Quote from: Ekaros;300725

Hmm, just notice does the thin line between body and head belong there?

I don't see it..?

Edit: Saw it, fixed it.

hoggy · « **Reply #1172 on:** Fri, 25 February 2011, 05:59:33 »

Sorry to be picky, but on the escapee, the top lines of the keyboard don't match up, neither does the sleeve.

It's still a better job than I could do!

bugfix · « **Reply #1173 on:** Fri, 25 February 2011, 06:04:56 »

Should match up better now.

Ekaros · « **Reply #1174 on:** Fri, 25 February 2011, 06:10:42 »

Quote from: bugfix;300728

Should match up better now.

Good work, sleeve might be still a bit off with the "inner" side being shorter or I'm seeing my own things. Can live it with it.

EDIT: If I see it correctly with my bad viewer(IrfanView), the gap is same but sides of wrist aren't matched.

7bit · « **Reply #1175 on:** Fri, 25 February 2011, 07:05:53 »

Quote from: Ekaros;300731

Good work, sleeve might be still a bit off with the "inner" side being shorter or I'm seeing my own things. Can live it with it.

EDIT: If I see it correctly with my bad viewer(IrfanView), the gap is same but sides of wrist aren't matched.

The lines of the sleeve and keyboard must be totally level.

Also: Please look at my PNG file.

This is how it should look like in the end:

Ekaros · « **Reply #1176 on:** Fri, 25 February 2011, 07:21:41 »

Quote from: 7bit;300747

The lines of the sleeve and keyboard must be totally level.

Also: Please look at my PNG file.

This is how it should look like in the end:

Show Image

Just to be fair, that png is off by one pixel too(inner sleeve to outer sleeve). Good thing we don't have larger issues on this desing anymore ;D

tjweir · « **Reply #1177 on:** Fri, 25 February 2011, 07:27:11 »

Quote from: 7bit;300709

I will ask about these.

How many will you take and which colors?

I will take 6 of these blind caps. I don't care about the colour.

7bit · « **Reply #1178 on:** Fri, 25 February 2011, 07:28:03 »

Quote from: Ekaros;300749

Just to be fair, that png is off by one pixel too(inner sleeve to outer sleeve). Good thing we don't have larger issues on this desing anymore

1pixel is 0.01m.

Do you think it is too much off?

Maybe we should look at it at 1pixel=1/1000mm.

;-)

The only thing I really don't like in the current SVG version is that the sleeve and arm are a bit too small, compared to the other sleeve.

Ekaros · « **Reply #1179 on:** Fri, 25 February 2011, 07:32:50 »

Quote from: 7bit;300751

1pixel is 0.01m.

Do you think it is too much off?

Maybe we should look at it at 1pixel=1/1000mm.

;-)

The only thing I really don't like in the current SVG version is that the sleeve and arm are a bit too small, compared to the other sleeve.

Have to check it...

Ok, there is difference or 10 pixels between upper and lower arm. Should arms and legs be same width?

bugfix · « **Reply #1180 on:** Fri, 25 February 2011, 07:59:50 »

What about now?

Ekaros · « **Reply #1181 on:** Fri, 25 February 2011, 08:12:28 »

Quote from: bugfix;300766

What about now?

Outerside of keyboard is wrong by one pixel, I belive, sleeve is good.

On Left side arm the bicep is fatter than on right side or the sleeve. Someone else can make the judgment call if bicep and other part should be same or different.

After all this nippicking I'm starting to feel obligided to order more of these...

bugfix · « **Reply #1182 on:** Fri, 25 February 2011, 08:16:27 »

And now?

^.^

Ekaros · « **Reply #1183 on:** Fri, 25 February 2011, 08:20:50 »

Quote from: bugfix;300770

And now?

^.^

It's aesthetic call, keyboard still there, but at scale it's unnotisable. The geometry differs a bit, upper body is now slightly fatter.

7bit · « **Reply #1184 on:** Fri, 25 February 2011, 09:07:46 »

Quote from: Ekaros;300773

It's aesthetic call, keyboard still there, but at scale it's unnotisable. The geometry differs a bit, upper body is now slightly fatter.

Looks quite fine to me. The arms are thinner than in my PNG which is more realistic.

There are only 2 change I would like to have.

1. Between keyboard and sleeve is a litle piece of arm or wrist which should be slightly thicker.

2. Please make the SVG file such that the keyboard runner is maximal magnified in a square and in both directions centered (something like on the PNG file).

I just don't want to have this off-center graphic handed over to SP and 50 GeekHackers in tears because the escapee came out so small on the escape key.

ps: maybe the body less fat, as it was before ...

This is how it looks like on a key cap:

Ekaros · « **Reply #1185 on:** Fri, 25 February 2011, 09:09:53 »

You have to zoom real close to see keyboard. I wouldn't say the body shape is an issue, it isn't 90-degree angle anymore but not bad.

bugfix · « **Reply #1186 on:** Fri, 25 February 2011, 09:18:33 »

Am I getting there?

Sorry for all the mistakes, I'm no pro...

7bit · « **Reply #1187 on:** Fri, 25 February 2011, 09:28:34 »

Quote from: bugfix;300800

Am I getting there?

Sorry for all the mistakes, I'm no pro...

In terms of SVGs you are the one who can read and write amongst primitive natives who can't!

It is perfect, except for the wrist and sleeve. If you could do it the same way as it is in my PNG it would be great.

guilleguillaume · « **Reply #1188 on:** Fri, 25 February 2011, 09:32:10 »

7bit finally to change all the Noppoo Keycaps we will need to take:

STANDARD 1
ONEHALFMOD 1
POS 1

And just wait for Melissa response about the possibility of making the Spacebar.

Is there a Problem if we wait until she is back to update our last votes?

bugfix · « **Reply #1189 on:** Fri, 25 February 2011, 09:36:29 »

Should look more similar to your sleeve now.

7bit · « **Reply #1190 on:** Fri, 25 February 2011, 09:38:46 »

Quote from: guilleguillaume;300810

7bit finally to change all the Noppoo Keycaps we will need to take:

STANDARD 1
ONEHALFMOD 1
POS 1

And just wait for Melissa response about the possibility of making the Spacebar.

Is there a Problem if we wait until she is back to update our last votes?

Not at all. We are also waiting for some other prices. But then, I don't want to wait too long anymore.

7bit · « **Reply #1191 on:** Fri, 25 February 2011, 09:53:23 »

Quote from: bugfix;300812

Should look more similar to your sleeve now.

Now it's perfect (at least to me):

bugfix · « **Reply #1192 on:** Fri, 25 February 2011, 09:55:03 »

Woohoo!

7bit · « **Reply #1193 on:** Fri, 25 February 2011, 09:55:46 »

The Awesome yellow face is near perfect, except that the left eye could be slightly more to the left and maybe the right eye a bit more to the right (not much) beciase the eyes look a bit too narrow.

bugfix · « **Reply #1194 on:** Fri, 25 February 2011, 09:58:55 »

Moved the eyes a little bit.

Koeitje · « **Reply #1195 on:** Fri, 25 February 2011, 10:14:39 »

Can't we get an orange awesome face to match the popular gaming kit?

7bit · « **Reply #1196 on:** Fri, 25 February 2011, 10:30:26 »

Remember: The black stuff needs now only be 0.2mm
thick, the grey stuff is where the background is which
needs to be 0.5 thick (said Melissa!).

What this file needs is to more space around the eyes
as shown in the grapphic. The left eye must be moved
slightly more right, to allow the cutaway around it and
finally the tounge must be lifted a bit up. It is also possible
to make the lip thinner (0.2mm).

Everything clear?

Here is the file to start with:
awesome_white_on_red.zip

7bit · « **Reply #1197 on:** Fri, 25 February 2011, 10:34:11 »

Quote from: bugfix;300824

Moved the eyes a little bit.

The left eye 7 pixels[1] up and you are the hero of the day!
-----------------
[1] relative to your 1250x1250 magnification.

Quote from: Koeitje;300829

Can't we get an orange awesome face to match the popular gaming kit?

Vote for
AWESOMEORANGE 25

and get them for $4 per key.

bugfix · « **Reply #1198 on:** Fri, 25 February 2011, 10:35:20 »

http://philblog.de/dl/awesome_white_on_red.svg
http://philblog.de/dl/awesome_black_on_yellow.svg

7bit · « **Reply #1199 on:** Fri, 25 February 2011, 10:47:32 »

Quote from: bugfix;300846

http://philblog.de/dl/awesome_white_on_red.svg
http://philblog.de/dl/awesome_black_on_yellow.svg

The bottom-line of the left eye is now 2 pixels higher than the right one, but I think ca .015mm are not really a problem.

News:

Author Topic: Double shot replacements ROUND THREE: Vote for Kits & Quantities! (Read 1069373 times)