Bright LED behind a white PBT keycap ?

[The Solutor]

I'm sure ripster already tried

So how it looks ?

[HaveANiceDay]

Don't know if PBT changes much, but it would probably look like a PLU ML-87 seen here: http://geekhack.org/showpost.php?p=277467&postcount=7

[The Solutor]

Don't know if PBT changes much, but it would probably look like a PLU ML-87 seen here: http://geekhack.org/showpost.php?p=277467&postcount=7

Thanks, although the linked photo seem taken with a lot of direct light, so I think that don't give the right idea.

I'm sure that some other shots are "hidden" in this forum.

[HaveANiceDay]

I found this pic in a Poker review by Sixty at deskthority.net

That should be a Cherry Corp PBT key. Those are really thick, so a thinner white one(like those you can get from imsto) should be more see-through.

Source: http://deskthority.net/viewtopic.php?f=4&t=125

[The Solutor]

I found this pic in a Poker review by Sixty at deskthority.net

Show Image

That should be a Cherry Corp PBT key. Those are really thick, so a thinner white one(like those you can get from imsto) should be more see-through.

Source: http://deskthority.net/viewtopic.php?f=4&t=125

Thanks again, very helpful

[RiGS]

That's a thin Signature Plastic ABS key.

[digitalleftovers]

My white ABS Ducky scroll lock key has a glow pattern identical to that SP key pictured above.  Not sure about the PBT, though.

[sixty]

That's a thin Signature Plastic ABS key.

Its PBT.

[RiGS]

Hey, don't mess with my photographic memory!
http://geekhack.org/showpost.php?p=295118&postcount=30

[sixty]

Hey, don't mess with my photographic memory!
http://geekhack.org/showpost.php?p=295118&postcount=30

Yes, I later corrected it a few posts later though... or maybe in some other topic.. or I should have... either that or I told laden by PM. Anyway, key is PBT, sublimation dyed. Does not matter though on this topic. The ABS ones are the same results with LEDs