[GB] Double shot replacements ROUND FOUR! - SHIPPING!

[7bit]

NOIR/GLIDER
The best way to go.


Are we going with the glider with grid or without? I sort-of like the grid, but am cool either way.

The problem is that the grid-lines can't be so thin we would like them.Maybe I will set up a poll about the actual design.

[Brendan]

Hey, after reading the wiki still a tad unclear on what I should order. I have a Poker and want to order the Dolch scene aka Round 3 keys. What am I supposed to write on my order and is there an approximate cost?

Thanks, Brendan

[7bit]

Hey, after reading the wiki still a tad unclear on what I should order. I have a Poker and want to order the Dolch scene aka Round 3 keys. What am I supposed to write on my order and is there an approximate cost?

Thanks, Brendan

ROUND3/TENKLESS
ROUND3/SPACELEO
EMAIL your email address

[fossala]

Sorry 7bit I am a bit confused you first advised me to order */SPACE for my poker and you advised Brendan to order */SPACELEO. Which one should it be.

[7bit]

Sorry 7bit I am a bit confused you first advised me to order */SPACE for my poker and you advised Brendan to order */SPACELEO. Which one should it be.

Most likely there will be that spacebar which will fit 3 different keyboards:
Cherry/Filco/Leopold

I'm not sure anymore.

Was it the Poker or the Nooppoo which had the same space bar as the Leopold?

Where is the #1 kbd Xpert when I need him?

[jpm804]

Poker has filco spacing... forgot what the noppoo was but I think its shorter so I dont think the leo spacebar will work on it.

[7bit]

Poker has filco spacing... forgot what the noppoo was but I think its shorter so I dont think the leo spacebar will work on it.

I've started a Space Bar wiki. I always forget which space bar fits which keyboard.

I think the Poker was something like 5.5 units wide...

Looking at his reversed LOD key.

Refer to the Key Reference Wiki.

That's why it's CALLED the Key Reference Wiki.
(Attachment Link) 30446[/ATTACH]

Geekhack wiki sucks!
Deskthority wiki FTW!

[jpm804]

I've started a Space Bar wiki. I always forget which space bar fits which keyboard.

I think the Poker was something like 5.5 units wide...

But I'm using my filco spacebar from my round 3 set on my poker....

[RColinTaylor]

But I'm using my filco spacebar from my round 3 set on my poker....

Show Image

yes, we get it, your Poker is pretty.

[RColinTaylor]

Ah, so it IS Filco compatible.

Added to the wiki.

The real wiki.  Not one of those fake Deskthority.net wikis.

Shouldn't math be used? Surely someone has a Poker bar that can be measured.

[7bit]

Well, that makes a LOT of sense.

Start a spacebar wiki instead of adding a few missing spacebars to the existing wiki..........................

I've just found some keyboards in you wiki and added them to my wiki.

You wiki is really great except that there almost no measures. Aklso, my wiki article is dedicated to space bars only, so it is much easier to find the information needed.

I invite you to add (non-watermarked) pictures and other space bar related information to it!

Ah, so it IS Filco compatible.

Added to the wiki.

The real wiki.  Not one of those fake Deskthority.net wikis.

10 PRINT "LOL"
20 GOTO 10

[7bit]

But I'm using my filco spacebar from my round 3 set on my poker....

Show Image

Thanks, it looks great!

[RColinTaylor]

I like math.

What's wrong with just believing the pic above.  I don't see any photoshop and I KNOW photoshopped pixels when I see them.

Yes, but you yourself wrote the wiki on altering keys using jigs.

[Brendan]

I compared your pictures with my poker and while it is around 11cm in length the stem spacings (for the stabilizers and switch) are further apart compared to the Leopold (ie, Filco style). The left and right stem holes are much closer to the sides compared to the Leopold, not sure if this helps.

Brendan

[7bit]

If you steal my pics be sure and use my watermarks.

I will never steal your pics!

Show Image

Thanks, it looks great!

[keyboardlover]

But I'm using my filco spacebar from my round 3 set on my poker....

Show Image

Love the KL key!

[RColinTaylor]

He sounds trustworthy......................

So did Reagan. Trickle down that concept.

[jpm804]

Not to beat a dead horse but here is a filco stock spacebar versus a poker spacebar:

Sorry for the bad cellphone pics, too lazy to bring out my camera. Also sorry no measuring graphic to include in picture.

Top: Poker Bottom: Filco

[RColinTaylor]

Not to beat a dead horse but here is a filco stock spacebar versus a poker spacebar:

Sorry for the bad cellphone pics, too lazy to bring out my camera. Also sorry no measuring graphic to include in picture.

Top: Poker Bottom: Filco

Show Image

Show Image

Alright, fine, you aren't Reagan; they are the same and you are trustworthy. <3.

[jpm804]

Alright, fine, you aren't Reagan; they are the same and you are trustworthy. <3.

Just trying to help out the community..I really dont mind if I'm proven wrong as long as the right information is being provided.

jpm804 - thanks.  Added both pics to the REAL ****ING KEY REFERENCE WIKI.

BTW I trusted you all along.

Don't worry sometimes I dont trust myself...=P

But hoping to clarify if the noppoo mini spacebar is shorter, that piece I wasnt sure of since I sold my noppoo and cant confirm.

[7bit]

Hey, after reading the wiki still a tad unclear on what I should order. I have a Poker and want to order the Dolch scene aka Round 3 keys. What am I supposed to write on my order and is there an approximate cost?

Thanks, Brendan

ROUND3/TENKLESS
ROUND3/SPACE
EMAIL your email address

[jpm804]

In the Key Ref Wiki.

Doesn't look like it to me.

Thanks for confirming Ripster...

[itlnstln]

But hoping to clarify if the noppoo mini spacebar is shorter, that piece I wasnt sure of since I sold my noppoo and cant confirm.

It is by about a 1/4".  I don't have any rulers handy, I just put my Noppoo on top of my Filco and eye-balled it.

[7bit]

But hoping to clarify if the noppoo mini spacebar is shorter, that piece I wasnt sure of since I sold my noppoo and cant confirm.

OK I've found it:
5.5 units, key mounts are 43mm apart from the center mount.

I'm quite sure that was the noppoo space bar.

ps: added to the DeskThority high quality wiki :-P


Looks like 5.5 units to me!

It is by about a 1/4".  I don't have any rulers handy, I just put my Noppoo on top of my Filco and eye-balled it.

43+25.4/4==49.35

Not bad (Filco is 50mm)!

[7bit]

The Deskthority Wiki truly sucks.  Plus I don't think Webwit will allow me to port the RipOmeter and Peak Force Wiki over.

Maybe (for the wiki's sake) it is better you keep making fun of it.

[Brendan]

Just PMed your other account again, this time with the plain spacebar instead of the Leopold one.

Brendan

[7bit]

Just PMed your other account again, this time with the plain spacebar instead of the Leopold one.

Brendan

Your question caused 2 more pages in this thread plus a new wiki article @ deskthority!

[7bit]

It's pretty easy to make fun of the Deskthority.net wiki.  Just click on anything NOT written by Sixty.

As far as I know, Sixty did not write any wiki article.

So you make fun of daedalus and me!

[7bit]

Damn, anybody notice the staining on the bottom row keys!

Look at C, N and M!   S, D and L too.....
(Attachment Link) 30455[/ATTACH]

These key caps are only to protect the keyboard during transport. They are labeled to make it easier to swap them with the real key caps you can order from the Round 4 group buy.

Here is a link to it:
Double shot replacements ROUND FOUR!

[RColinTaylor]

These key caps are only to protect the keyboard during transport. They are labeled to make it easier to swap them with the real key caps you can order from the Round 4 group buy.

Here is a link to it:
Double shot replacements ROUND FOUR!

Laughed. Laughed hard.

[itlnstln]

These key caps are only to protect the keyboard during transport. They are labeled to make it easier to swap them with the real key caps you can order from the Round 4 group buy.

Here is a link to it:
Double shot replacements ROUND FOUR!

Well done.

[Brendan]

Your question caused 2 more pages in this thread plus a new wiki article @ deskthority!

[7bit]

But we just figured out it won't fit?
(Attachment Link) 30456[/ATTACH]

And if the glove don't fit, acquit!

This kit contains no space bar.

3 pages by now :-)

[dorkvader]

P.S.  I highly recommend today's generation invests in a ruler. They come in handy sometimes.  I use metric unless I'm posting at Deskthority.

I have three metal rulers and a scale that I sometimes use as one.

Also, the DT wiki is just starting. I'm sure it'll be better in time.

Finally: 7Bit is right about the purpose of those plastic things that protect your keys in transit. Pity it's so hard to get doubleshot in Dvorak.

[Mysteric]

Write a message to 7bit_r4:
ROUND3/STANDARD
ROUND3/SPACE
ROUND3/RGB
ROUND3/GAMER
ROUND3/UK
EMAIL your email address

How much would this cost inc. shipping roughly?

[kaiserreich]

Now that the order thread for the novelty key caps is up in the other GB, would this affect this GB in that it wont make at least 25 keys?

[dorkvader]

We're going to make 25+ glider keycaps, even if that means I have to buy them all myself. It's really all that matters

[7bit]

How much would this cost inc. shipping roughly?

$14 for shipping.

Now that the order thread for the novelty key caps is up in the other GB, would this affect this GB in that it wont make at least 25 keys?

Maybe we can do a combined order.

[Mysteric]

$14 for shipping.



Maybe we can do a combined order.

Sorry but I meant how much would the actual keycaps cost me in total?

[7bit]

Sorry but I meant how much would the actual keycaps cost me in total?

By the end of the day you will receive a an email about what you ordered and how much it would cost if there are enough orders (25 minimum for each kit).

[Mysteric]

Hmm, is it possible at all to get the same keys that I wanted but for the keycaps to be the colour 'BFN' on the SP colour chart thing with white lettering?

[7bit]

No.

Round3 comes in WA on GE (normal keys) or GX (modifiers).

edit:
If you take 25 of one kit, you can have any possible color on the color sample ring.

[7bit]

SPH/TKL......................25
^^^ These get supported by a heroic GeekHacker who will take all leftover kits. For more info, please see the poll-thread.

ROUND3/STANDARD...............9
ROUND3/TENKLESS...............5
ROUND3/TERMINAL...............5
ROUND3/TKL....................1
^^^ 5 more and it happens

RETRO/STANDARD...............17
RETRO/TENKLESS...............13
RETRO/TKL.....................4
^^^ 34 are enough to let it happen, but not enough to lower the prices!

NOIR/BLANKTKL.................1
NOIR/STANDARD................15
NOIR/TENKLESS.................6
NOIR/TKL......................3
^^^ 26 are enough to let it happen, but not enough to lower the prices!


DARK/STANDARD.................2
DARK/TENKLESS.................2
DARK/TENKLESS/NONE............1
DARK/TKL......................1
^^^

DARK/STANDARD/ORANGE.........12
DARK/TENKLESS/ORANGE..........2
DARK/TKL/ORANGE...............1
^^^ 10 more and you can really get these...

[Mysteric]

Hmm, in that case I'd probably prefer the NOIR kit. I'm not sure what I'd have to order to have the same as before in terms of keys but with the NOIR style instead of ROUND3; Would it just be:

NOIR/STANDARD
NOIR/SPACE
NOIR/RGB
NOIR/GAMER
NOIR/UK
EMAIL

And how much would this be at the current levels of interest?

[jpm804]

Hopefully we can get some more orders for the DARK style since I am interested in both combinations.

[Alasdair]

How do you determine how many "units" a keycap is? Is one unit the width of a standard alphanumeric key i.e. ~18mm.

[7bit]

Hmm, in that case I'd probably prefer the NOIR kit. I'm not sure what I'd have to order to have the same as before in terms of keys but with the NOIR style instead of ROUND3; Would it just be:

NOIR/STANDARD
NOIR/SPACE
NOIR/RGB
NOIR/GAMER
NOIR/UK
EMAIL

And how much would this be at the current levels of interest?

Just send this to 7bit_r4 and you will know!

[7bit]

How do you determine how many "units" a keycap is? Is one unit the width of a standard alphanumeric key i.e. ~18mm.

Yes!

[Minas]

I tried to order and they did not show up on the confirmation email.  Will these not be available?  I saw them on the wiki.

RETRO/TAPEDRIVEFUN/YELLOW
RETRO/LOTUSESC/RED

[John Fourth]

So what color is the SHP/TKL? What is the price? Which poll-thread? I looked on the wiki and the text poll-thread.

thank you for the help organizing this effort!