Author Topic: Price Check- What's it Worth?  (Read 1471510 times)

Zephyraeon, iamtootallforthis, Photekq and 12 Guests are viewing this topic.

Offline justin one

  • Trade Count: (0)
  • Posts: 57
  • Location: Michigan
Re: Price Check- What's it Worth?
« Reply #450 on: Thu, 29 November 2012, 17:46:02 »
Anybody have an estimate of what I could get for a two month old Filco MJ2 Ninja 104 w/ browns? I've done a detachable mini-usb mod to it if that matters for anything. No shine on the keycaps.
[ KBC Poker ] [ Ducky DK9087 ]

Offline precarious

  • Trade Count: (0)
  • Posts: 282
  • LOOK MOM, I'M A DRAGONZORD! DOOOO DODOODODODOODOO
Re: Price Check- What's it Worth?
« Reply #451 on: Sat, 01 December 2012, 20:36:11 »


album: http://imgur.com/a/ZBmCn

i'm wondering what these might be worth, i'm considering selling these old vintage cherry spherical doubleshots i pulled from a microscope keyboard i purchased a month or so ago.  they don't really look yellow, mostly off white, color is just a bit off.  they fit onto MX stems but they need to be sized down so they can actually recede into the switch housing, otherwise it would be a rather tenuous arrangement.  they are smaller than modern keycaps and all a uniform profile, but i suppose anyone who would be really interested in such a thing wouldn't mind.

the original board they came from had some terrible, gritty-feeling switches that really aren't worth anything beyond collector's value in my opinion.

Anybody have an estimate of what I could get for a two month old Filco MJ2 Ninja 104 w/ browns? I've done a detachable mini-usb mod to it if that matters for anything. No shine on the keycaps.

i purchased a (barely/not noticeably) used one on here for 100-110, some may view the detachable mod as a benefit or a drawback, so i couldn't say for sure on that one.  are you still able to use the regular filco cable?
« Last Edit: Sat, 01 December 2012, 22:09:24 by precarious »

Offline gizmo

  • Trade Count: (0)
  • Posts: 8
  • Location: Midwest USA
Re: Price Check- What's it Worth?
« Reply #452 on: Sat, 01 December 2012, 21:52:54 »
Anybody have an estimate of what I could get for a two month old Filco MJ2 Ninja 104 w/ browns? I've done a detachable mini-usb mod to it if that matters for anything. No shine on the keycaps.

$80 to $100.  I believe there is a 104 MJ2 with Blues on OCN right now at $85.  The mod could boost value to the right buyer, but that person may take awhile to find.  Perhaps throw a MiMic cable in with it to sell the detachable feature?

Offline TheGrey

  • Trade Count: (0)
  • Posts: 39
  • Location: Somewhere in the UK
Re: Price Check- What's it Worth?
« Reply #453 on: Sun, 02 December 2012, 04:13:00 »
Marquardnt mini ergo? With and without keycaps how much do y'all think is worth?

fyi, I should be receiving it in the post soon from the ebay...

Cheers!


Offline durainello

  • Trade Count: (0)
  • Posts: 136
  • Location: Singapore
    • Free cheap and fast International shipping solution to fellow Singaporean.
Re: Price Check- What's it Worth?
« Reply #454 on: Sun, 02 December 2012, 09:38:36 »
Just checking, how much can i fetch for Filco MJ2 Multicam 104 MX Brown? Full set of accessories intact.

Offline do_Og@n

  • * Maker
  • Trade Count: (0)
  • Posts: 988
Re: Price Check- What's it Worth?
« Reply #455 on: Sun, 02 December 2012, 21:26:26 »
I grabbed this puppy from a Thrift store and I was wondering what it is worth. Not sure what the switch type is (it resembles a buckling spring) and it has some pretty interesting keys.

Offline alaricljs

  • I be WOT'ing all day...
  • ** Moderator Emeritus
  • Trade Count: (0)
  • Posts: 3715
  • Location: NE US
Re: Price Check- What's it Worth?
« Reply #456 on: Sun, 02 December 2012, 21:30:09 »
Can I get a price check on a vintage Red Cherry ESC?  Anyone?
Filco w/ Imsto thick PBT
Ducky 1087XM PCB+Plate, w/ Matias "Quiet Click" spring-swapped w/ XM Greens

Offline AKIMbO

  • HHKBro
  • Trade Count: (0)
  • Posts: 1778
  • Location: Tennessee
  • Know Topre, Know Peace. No Topre, No Peace.
Re: Price Check- What's it Worth?
« Reply #457 on: Sun, 02 December 2012, 21:30:29 »
^Zing!
Mkawa Beta SSK | IBM SSK | IBM Model AT F | IBM F 122 | IBM Unsaver | LZ-GH (62g ergo clears) | HHKB Pro2 Type-S | HHKB Pro2 | Realforce 87U-Silent (55g uniform) | Leopold FC660C | Omnikey 101 (blue alps) | Kingsaver (blue alps) | Zenith ZKB2 (green alps)
| KBD75 (box reds)

Offline jcrouse

  • Trade Count: (0)
  • Posts: 709
  • Location: Missouri, USA
Re: Price Check- What's it Worth?
« Reply #458 on: Sun, 02 December 2012, 21:31:40 »
Can I get a price check on a vintage Red Cherry ESC?  Anyone?

Ooh ooh, I know that one .... $5.

Offline alaricljs

  • I be WOT'ing all day...
  • ** Moderator Emeritus
  • Trade Count: (0)
  • Posts: 3715
  • Location: NE US
Re: Price Check- What's it Worth?
« Reply #459 on: Sun, 02 December 2012, 21:34:28 »
Good news is the only ones on ebay so far are WASD's lasered Esc.  And yes, they are $5
Filco w/ Imsto thick PBT
Ducky 1087XM PCB+Plate, w/ Matias "Quiet Click" spring-swapped w/ XM Greens

Offline SmallFry

  • ** Moderator Emeritus
  • Trade Count: (0)
  • Posts: 3887
  • Location: Wisconsin, USA
  • Leaving 6/15; returning 6/22 or so.
Re: Price Check- What's it Worth?
« Reply #460 on: Sun, 02 December 2012, 21:43:26 »
I grabbed this puppy from a Thrift store and I was wondering what it is worth. Not sure what the switch type is (it resembles a buckling spring) and it has some pretty interesting keys.
That's a Peerless switch, those white inserts aren't supposed to pop off when a cap is pulled. I have one, they're a distinct taste for sure. Not sure the price on a Vintage one like that...

Offline snarlingchicken

  • Trade Count: (0)
  • Posts: 62
Re: Price Check- What's it Worth?
« Reply #461 on: Mon, 03 December 2012, 01:39:45 »
Need a price check on a Leopold FC700R with reds. http://geekhack.org/index.php?topic=34706.msg642119#msg642119

Bought it over summer. Haven't really used it much as I've been using the RACE after it finally came in. Had the plastic cover over it whenever it wasn't in use. KBT caps are still mint. Any idea what it might be worth here seeing as (last I checked) it isn't available yet?

Willing to trade for a new Chrome mini metro if someone's got one lying around for sale :3
« Last Edit: Mon, 03 December 2012, 03:59:43 by snarlingchicken »
Current Daily: Leopold FC700R & KBT Race

Offline do_Og@n

  • * Maker
  • Trade Count: (0)
  • Posts: 988
Re: Price Check- What's it Worth?
« Reply #462 on: Mon, 03 December 2012, 21:50:24 »
I just got these two items in a pair. How much are they worth?

Offline mbodrov

  • Trade Count: (0)
  • Posts: 2
Re: Price Check- What's it Worth?
« Reply #463 on: Wed, 05 December 2012, 07:10:04 »
I just got these two items in a pair. How much are they worth?
About $15-20 each.

Offline hluo87

  • Trade Count: (0)
  • Posts: 78
Re: Price Check- What's it Worth?
« Reply #464 on: Wed, 05 December 2012, 11:48:44 »
any one interested in razer widow ultimate 2012 version?
how much does it worth???

Offline IvanIvanovich

  • Mr. Silk Underwear
  • Trade Count: (0)
  • Posts: 8199
  • Location: USA
Re: Price Check- What's it Worth?
« Reply #465 on: Wed, 05 December 2012, 22:48:28 »
Around here, Razer is a hard sell, ebay would probably be better to get rid of it. If it's in good condition, you could get $60-70 probably.

Offline BoxWithADot

  • Trade Count: (0)
  • Posts: 102
  • Location: Texas
Re: Price Check- What's it Worth?
« Reply #466 on: Thu, 06 December 2012, 00:01:48 »
any one interested in razer widow ultimate 2012 version?
how much does it worth???

I sold mine on here for $65 shipped not too long ago, you might could get more on ebay like lysol said though.

Offline Neo.X

  • Trade Count: (0)
  • Posts: 341
  • Location: Mississauga, CA
Re: Price Check- What's it Worth?
« Reply #467 on: Thu, 06 December 2012, 13:20:36 »
Price checking for brand new Filco

MJ2 Multicam 104 MX brown
MJ2 Ninja 104 MX red
MJ2 Limit edition yellowtop 104 MX black

Thanks
« Last Edit: Thu, 06 December 2012, 20:15:47 by Neo.X »
All those keyboards will be lost in time....

Offline jeroplane

  • Trade Count: (0)
  • Posts: 544
  • Location: Australia
Re: Price Check- What's it Worth?
« Reply #468 on: Thu, 06 December 2012, 19:20:32 »
Price checking for brand new Filco

MJ2 Multicam 104 MX brown
MJ2 Ninja 104 MX red
MJ2 Limit edition yellowtop MX black

Thanks

Not sure on the price for those, but I know there is definitely one buyer for the yellowtop. You should contact rowdy, he has been looking for one for ages.

Offline gizmo

  • Trade Count: (0)
  • Posts: 8
  • Location: Midwest USA
Re: Price Check- What's it Worth?
« Reply #469 on: Fri, 07 December 2012, 20:20:41 »
Leopold FC200RT, MX Cherry Brown, black TKL chassis
Original box, PS2/USB adapter, stock black caps, ~125 50A o rings, white Filco Ninja keycaps, lavender WASD


Anyone have an idea what I should ask for?  Really hankering for something Topre to try.

Offline snarlingchicken

  • Trade Count: (0)
  • Posts: 62
Re: Price Check- What's it Worth?
« Reply #470 on: Sat, 08 December 2012, 03:02:51 »
Still need a PC on that Gray MX Red LEOPOLD FC700R. :3 plz and ty.
Current Daily: Leopold FC700R & KBT Race

Offline MissMurd3r84

  • Trade Count: (0)
  • Posts: 641
  • Location: New South Wales, Australia.
  • In IRC wondering why Kmiller8 is yelling.
Re: Price Check- What's it Worth?
« Reply #471 on: Sat, 08 December 2012, 04:12:56 »
Still need a PC on that Gray MX Red LEOPOLD FC700R. :3 plz and ty.
I'd say about $100ish, IMO. Maybe $110 since it's hard to find in America.
KBC Poker - Red switches. Noppoo Choc Mini - Black switches. Leopold FC700R (White) - Blue switches. Ducky YOTD - Brown switches. Razer BW - Blue switches and rusted.

Offline Noman1000

  • Trade Count: (0)
  • Posts: 2
  • Location: United States
    • website
Re: Price Check- What's it Worth?
« Reply #472 on: Mon, 10 December 2012, 12:13:22 »
I have a fried RK9000BR, what could I sell it for?

Also the 0 key on the numpad is snapped off.

Offline jdcarpe

  • * Curator
  • Trade Count: (1)
  • Posts: 8856
  • Location: Odessa, TX
  • Live long, and prosper.
Re: Price Check- What's it Worth?
« Reply #473 on: Mon, 10 December 2012, 13:57:16 »
I have a fried RK9000BR, what could I sell it for?

Also the 0 key on the numpad is snapped off.

Welcome to Geekhack!

Fried Rosewill? Well, since you can find these on sale for $65 shipped brand new, and the person who buys it will have to pay around $15 in shipping to get it from you, I would say around $20 plus shipping would be fair for a parts board. The pad printed ABS key caps aren't going to fetch much, if anything, so really the only value here is for the switches, which will have to be desoldered.

Did you spill something on it? Did the USB connector fall off?

Anyway, I'm interested if you think my value assessment is fair. You can PM me.
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline Noman1000

  • Trade Count: (0)
  • Posts: 2
  • Location: United States
    • website
Re: Price Check- What's it Worth?
« Reply #474 on: Mon, 10 December 2012, 14:04:31 »
I have a fried RK9000BR, what could I sell it for?

Also the 0 key on the numpad is snapped off.

Welcome to Geekhack!

Fried Rosewill? Well, since you can find these on sale for $65 shipped brand new, and the person who buys it will have to pay around $15 in shipping to get it from you, I would say around $20 plus shipping would be fair for a parts board. The pad printed ABS key caps aren't going to fetch much, if anything, so really the only value here is for the switches, which will have to be desoldered.

Did you spill something on it? Did the USB connector fall off?

Anyway, I'm interested if you think my value assessment is fair. You can PM me.

The USB connection failed so I tried to solder it back on, needless to say that didn't work and when I plugged it in the numlock LED was lit and the keyboard wasn't responsive. I asked some friends who were better with soldering and they said the connection looked fine, so I figure the controller might have been fried when I plugged it in. I just wanted to get rid of it so I could get another keyboard.

Offline rootwyrm

  • Trade Count: (0)
  • Posts: 829
  • The Hands of Steel
    • My Website!
Re: Price Check- What's it Worth?
« Reply #475 on: Tue, 11 December 2012, 04:23:18 »
Don't know current on:

  • Wyse PC286 RJ12 keyboard (keycaps OR keyboard WITH rough diagrams for making USB adapter, in good shape)
  • Chicony / SMK doubleshot keycap set in white/black - Cherry MX 100% swap - pretty yellowed, but will clean up.
  • Focus FK2001 w/Alps Clones, minor damage (Esc keycap broken off,) Windows key version, all keys functional.
  • KeyTronic FlexPro with and without HotKey feature (with original manual, owned since new) - mostly shined on spacebar.
  • IBM InfoWindow 3151 RJ45 with non-LED PS/2 conversion performed
  • BNIB IBM Model M13 which I may have the original purchase order for as well.
  • IBM Model M13 - professionally restored by yours truly (no bolts, 1 rivet damaged) - left button intermittent due to fixed cable damage. Needs SDL->PS/2+2 conversion. (Second owner, will get cleaned up a bit more.)
  • IBM TrackPoint II (ThinkPad keyboard in external chassis) PS/2 model
  • Thermaltake Meka G1 - will be thoroughly cleaned up but not much more. Used <5 months. Keycaps are laser-filled ABS and thrashed. Will come with complete original box.


PM with any specific questions, happy to answer to the best of my ability. Most of these are being unloaded or considered for it because A) I need keyboards that last, damnit B) I need keyboards I LIKE, C) I need money to buy keyboards I like working on D) I need money to buy keyboards I have designs on modifying.
NOTE: We know the M13. I know the M13. I will not rape you, but be courteous to others here. If folks are actually serious about it, arrangements will be made. (If it's not true BNIB, that means it's one I used for a month before having to go to a HHKB.)
« Last Edit: Tue, 11 December 2012, 04:25:29 by rootwyrm »
"I remain convinced I am the only person alive who has successfully worn out an IBM Model M mechanically."
Daily Drivers: Adesso 625 (NPKC PBT / Kailh Blue), Rosewill RK9000V2 (KC PBT / MX Brown), 1994 Model M13, Sun Type4, and the rare IBM 1394540.

Offline hluo87

  • Trade Count: (0)
  • Posts: 78
Re: Price Check- What's it Worth?
« Reply #476 on: Wed, 12 December 2012, 19:28:06 »
i want to check how much i can sell for
a BNIB CM Storm QuickFire Rapid - Mechanical Gaming Keyboard with Red CHERRY MX Switches
thanks.

Offline IvanIvanovich

  • Mr. Silk Underwear
  • Trade Count: (0)
  • Posts: 8199
  • Location: USA
Re: Price Check- What's it Worth?
« Reply #477 on: Wed, 12 December 2012, 19:30:07 »
Slightly less than retail if you want someone to buy it from you.

Offline TypoVampire

  • Trade Count: (0)
  • Posts: 27
Re: Price Check- What's it Worth?
« Reply #478 on: Fri, 14 December 2012, 16:33:14 »
I want to Price Check
the new Depth Black MX CC
and the 3D MX CC

Offline jdcarpe

  • * Curator
  • Trade Count: (1)
  • Posts: 8856
  • Location: Odessa, TX
  • Live long, and prosper.
Re: Price Check- What's it Worth?
« Reply #479 on: Fri, 14 December 2012, 16:57:37 »
I want to Price Check
the new Depth Black MX CC
and the 3D MX CC

$18
$30

/snark
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline bobola

  • Trade Count: (0)
  • Posts: 2
Re: Price Check- What's it Worth?
« Reply #480 on: Fri, 14 December 2012, 18:50:55 »
Not sure how people feel about broken stuff but
Got a mx cherry red rosewill .. pcb board is broken crack in half, but I believe all (if not, most) of the switches still works ..

Was going to go to the trash ..
Worft anything? or I was thinking giving out to someone who wants the switches.

Offline SmallFry

  • ** Moderator Emeritus
  • Trade Count: (0)
  • Posts: 3887
  • Location: Wisconsin, USA
  • Leaving 6/15; returning 6/22 or so.
Re: Price Check- What's it Worth?
« Reply #481 on: Fri, 14 December 2012, 18:55:24 »
You would be able to sell it for switches, but if you were going to give it away... I'd take it:)

Offline TypoVampire

  • Trade Count: (0)
  • Posts: 27
Re: Price Check- What's it Worth?
« Reply #482 on: Fri, 14 December 2012, 20:21:38 »
I want to Price Check
the new Depth Black MX CC
and the 3D MX CC

$18
$30

/snark

XD
Fine, what is the GOING rate on these 2 keycaps?

Offline SmallFry

  • ** Moderator Emeritus
  • Trade Count: (0)
  • Posts: 3887
  • Location: Wisconsin, USA
  • Leaving 6/15; returning 6/22 or so.
Re: Price Check- What's it Worth?
« Reply #483 on: Fri, 14 December 2012, 20:30:09 »
They are going for about $50-$75 for a "fair price". I won't touch them much more than $20 myself.

Offline TypoVampire

  • Trade Count: (0)
  • Posts: 27
Re: Price Check- What's it Worth?
« Reply #484 on: Fri, 14 December 2012, 22:49:26 »
Are they considered of equal woth?

Offline Shadovved

  • * Esteemed Elder
  • Trade Count: (0)
  • Posts: 2400
  • Location: Little Red Dot
  • King of Stickers (and GBs)
Re: Price Check- What's it Worth?
« Reply #485 on: Sat, 15 December 2012, 07:43:24 »
Some people tend to pay more for special or rarer ones.

I wouldnt buy either for more than $35.

But thats me. You have people who are willing to pay anywhere from 40-90 for them.  :cool: :cool:

Offline Halverson

  • Traitor Supreme
  • Trade Count: (3)
  • Posts: 6776
  • GIRLSHARK WIZBRO
Re: Price Check- What's it Worth?
« Reply #486 on: Sat, 15 December 2012, 12:15:06 »
Sell clacks at cost, your profit is mad cred.

Offline gizmo

  • Trade Count: (0)
  • Posts: 8
  • Location: Midwest USA
Re: Price Check- What's it Worth?
« Reply #487 on: Sat, 15 December 2012, 16:31:00 »
Leopold FC200RT, MX Cherry Brown, black TKL chassis
Original box, PS2/USB adapter, stock black caps, ~125 50A o rings, white Filco Ninja keycaps, lavender WASD

Anyone have an idea what I should ask for?  Really hankering for something Topre to try.

Would love to hear about something for this.

Offline metalliqaz

  • * Maker
  • Trade Count: (0)
  • Posts: 4911
  • Location: the Making Stuff subforum
  • Leopold fanboy
Re: Price Check- What's it Worth?
« Reply #488 on: Sun, 16 December 2012, 07:45:13 »
My opinion (and only my own opinion) is that the o-rings and Filco keycaps don't add much to the price unless you were very lucky and found someone looking for those items.  A new FC200R at EK is still 99.  I'm thinking you'd have to knock a pretty good chunk off.  I'm thinking perhaps $80 for all of it.

Offline do_Og@n

  • * Maker
  • Trade Count: (0)
  • Posts: 988
Re: Price Check- What's it Worth?
« Reply #489 on: Mon, 17 December 2012, 13:05:41 »
How much for a Yellow Limited Edition Filco Majestouch 2 w/MX Browns? It has barely been used and has no shine to the keycaps.

Offline SmallFry

  • ** Moderator Emeritus
  • Trade Count: (0)
  • Posts: 3887
  • Location: Wisconsin, USA
  • Leaving 6/15; returning 6/22 or so.
Re: Price Check- What's it Worth?
« Reply #490 on: Mon, 17 December 2012, 13:35:41 »
To Rowdy? Priceless... :P
On a serious note, I think you could ask about $120ish or it.

Offline razorsharpgears

  • Trade Count: (0)
  • Posts: 372
  • Location: SoCal, USA
  • TheOriginalBecker
    • Becker's 市場 рынок Markt - Sell/Buy/Trade
Re: Price Check- What's it Worth?
« Reply #491 on: Tue, 18 December 2012, 21:54:01 »
^^^Interested in selling that Yellow Filco?
Here at GeekClack, time isn't worth anything because CCs are money.
"You cannot plan the future. Only presumptuous fools plan. The wise man steers."
Cosmo Lavish
|WTB/T/S| Thread ←Link

Offline do_Og@n

  • * Maker
  • Trade Count: (0)
  • Posts: 988
Re: Price Check- What's it Worth?
« Reply #492 on: Tue, 18 December 2012, 23:09:44 »
^^^Interested in selling that Yellow Filco?

That depends on if I want to keep the Realforce keyboard....send me an offer for what you would pay for it.

Offline grave00

  • Trade Count: (0)
  • Posts: 31
Re: Price Check- What's it Worth?
« Reply #493 on: Thu, 20 December 2012, 01:49:20 »
What would a good condition Lexmark or IBM UK 51G8572 Model M likely be worth?


Offline do_Og@n

  • * Maker
  • Trade Count: (0)
  • Posts: 988
Re: Price Check- What's it Worth?
« Reply #494 on: Thu, 20 December 2012, 03:18:23 »
How much for a new Realforce 103U?
« Last Edit: Thu, 20 December 2012, 10:59:47 by do_Og@n »

Offline rekanise

  • Trade Count: (0)
  • Posts: 155
Re: Price Check- What's it Worth?
« Reply #495 on: Fri, 28 December 2012, 16:18:02 »
Can I check the price range for bro caps?

Offline boost

  • BOSTMOBILE
  • * Elevated Elder
  • Trade Count: (0)
  • Posts: 3285
  • NY Giants!!!
Re: Price Check- What's it Worth?
« Reply #496 on: Fri, 28 December 2012, 16:44:50 »
Can I check the price range for bro caps?

They were sold for $30-$35 on techkeys and some were 1 offs
"Aerodynamics are for people who can't build engines."

-Enzo Ferrari

Offline rekanise

  • Trade Count: (0)
  • Posts: 155
Re: Price Check- What's it Worth?
« Reply #497 on: Fri, 28 December 2012, 16:49:25 »
Can I check the price range for bro caps?

They were sold for $30-$35 on techkeys and some were 1 offs
thanks any idea on the range of prices in the aftermarket?

Offline boost

  • BOSTMOBILE
  • * Elevated Elder
  • Trade Count: (0)
  • Posts: 3285
  • NY Giants!!!
Re: Price Check- What's it Worth?
« Reply #498 on: Fri, 28 December 2012, 16:53:27 »
Can I check the price range for bro caps?

They were sold for $30-$35 on techkeys and some were 1 offs
thanks any idea on the range of prices in the aftermarket?


No clue on market value
"Aerodynamics are for people who can't build engines."

-Enzo Ferrari

Offline kmiller8

  • Banned
  •  Post Reporting Timeout
  • Trade Count: (0)
  • Posts: 1589
  • Who is that kmiller8 guy?
Re: Price Check- What's it Worth?
« Reply #499 on: Fri, 28 December 2012, 16:54:32 »
Can I check the price range for bro caps?

They were sold for $30-$35 on techkeys and some were 1 offs
thanks any idea on the range of prices in the aftermarket?

$30-$35 ideally :/