Author Topic: What did you get in the mail today? (Read 21263520 times)

SeriouSSpotS · « **Reply #10000 on:** Fri, 12 July 2013, 08:12:57 »

Quote from: rowdy on Fri, 12 July 2013, 05:53:48

Something purple:

Show Image

And something green and white:

Show Image

And some multi-coloured things:

Show Image

The magenta Fn keys actually look more like a really nice shade of pink :) And I have already lost one set of RGB power buttons to my 6yo.

Ohh sweet

Tym · « **Reply #10001 on:** Fri, 12 July 2013, 08:15:23 »

10000 Post Nice^^

Binge · « **Reply #10002 on:** Fri, 12 July 2013, 09:09:29 »

SeriouSSpotS · « **Reply #10003 on:** Fri, 12 July 2013, 09:14:30 »

Quote from: Binge on Fri, 12 July 2013, 09:09:29

Show Image

Kind of jealous right now :p

tadbitnerdy · « **Reply #10004 on:** Fri, 12 July 2013, 10:35:20 »

Quote from: Binge on Fri, 12 July 2013, 09:09:29

Show Image

Oh man, that phrase actually makes sense. I bet their sales went down because of this.

Potologue · « **Reply #10005 on:** Fri, 12 July 2013, 10:50:55 »

Some stuff from Techkeys.

Jack Karneval · « **Reply #10006 on:** Fri, 12 July 2013, 10:56:12 »

Quote from: Potologue on Fri, 12 July 2013, 10:50:55

Some stuff from Techkeys.

Those modifiers....

SeriouSSpotS · « **Reply #10007 on:** Fri, 12 July 2013, 10:57:24 »

MOZ · « **Reply #10008 on:** Fri, 12 July 2013, 14:20:24 »

Got some new tools, MKC steel keycap puller, blank red anodized aluminum key and 37 printed Zinc keycaps. Unlike R1, these R2 keycaps fit perfectly, not too tight like the previous round.

The_Beast · « **Reply #10009 on:** Fri, 12 July 2013, 14:24:04 »

100 orange and 100 blue LEDs

Zifle · « **Reply #10010 on:** Fri, 12 July 2013, 15:06:30 »

I received this, from Acidfire, today!

Acrylic case, for my HZH (Happy Zifle Hacking) :3

Five layers

Dat smoke colour!

All ready for some soldering!

MKULTRA · « **Reply #10011 on:** Fri, 12 July 2013, 15:16:45 »

Potato incoming!

Now waiting on stabs and LEDs

Dubsgalore · « **Reply #10012 on:** Fri, 12 July 2013, 15:43:26 »

Poor Man's Solder Station has arrived

but seriously, i'm super pumped to finally get started on my own projects and being really productive
hopefully this is going to become much more then just building my own boards

again, thanks jd for the advise!

Coumbaya · « **Reply #10013 on:** Fri, 12 July 2013, 15:53:41 »

These little things.

My board is probably faaaar away from anything tasteful, but I don't really give a crap. I love those keycaps.

)

CPTBadAss · « **Reply #10014 on:** Fri, 12 July 2013, 15:57:16 »

Quote from: Dubsgalore on Fri, 12 July 2013, 15:43:26

Show Image

Poor Man's Solder Station has arrived :D

but seriously, i'm super pumped to finally get started on my own projects and being really productive
hopefully this is going to become much more then just building my own boards ;)

again, thanks jd for the advise!

Apparently that station is a clone of the Hakko 936 I have. If it is, you should be fine. My station is amazing. Let me know how you like that Soldapult.

Sifo · « **Reply #10015 on:** Fri, 12 July 2013, 16:10:10 »

Swagling sitting on the QWERKeys keychain, got both of them today. They also included a half-life spherical so thank you!

jdcarpe · « **Reply #10016 on:** Fri, 12 July 2013, 16:16:55 »

Quote from: CPTBadAss on Fri, 12 July 2013, 15:57:16

Quote from: Dubsgalore on Fri, 12 July 2013, 15:43:26
Show Image

Poor Man's Solder Station has arrived :D

but seriously, i'm super pumped to finally get started on my own projects and being really productive
hopefully this is going to become much more then just building my own boards ;)

again, thanks jd for the advise!

Apparently that station is a clone of the Hakko 936 I have. If it is, you should be fine. My station is amazing. Let me know how you like that Soldapult.

Yeah, the Yihua is no Hakko, but from what I've seen, it's probably 80% as good. And at only $15 ($30 shipped), it's an easy point of entry. I recommended it to him over the Weller WLC-100, because the Weller has no real temp setting, only a 1-5 variable control.

Dubs, did you get those 1.6mm chisel tips yet?

emptythecache · « **Reply #10017 on:** Fri, 12 July 2013, 16:22:43 »

My zonkey cables showed up today.

(click for full album)

CPTBadAss · « **Reply #10018 on:** Fri, 12 July 2013, 16:24:31 »

Quote from: jdcarpe on Fri, 12 July 2013, 16:16:55

Quote from: CPTBadAss on Fri, 12 July 2013, 15:57:16
Quote from: Dubsgalore on Fri, 12 July 2013, 15:43:26
Show Image

Poor Man's Solder Station has arrived :D

but seriously, i'm super pumped to finally get started on my own projects and being really productive
hopefully this is going to become much more then just building my own boards ;)

again, thanks jd for the advise!

Apparently that station is a clone of the Hakko 936 I have. If it is, you should be fine. My station is amazing. Let me know how you like that Soldapult.

Yeah, the Yihua is no Hakko, but from what I've seen, it's probably 80% as good. And at only $15 ($30 shipped), it's an easy point of entry. I recommended it to him over the Weller WLC-100, because the Weller has no real temp setting, only a 1-5 variable control.

Dubs, did you get those 1.6mm chisel tips yet?

Ah ok. Good to know jdcarpe.

Dubsgalore · « **Reply #10019 on:** Fri, 12 July 2013, 16:32:01 »

Quote from: CPTBadAss on Fri, 12 July 2013, 15:57:16

Apparently that station is a clone of the Hakko 936 I have. If it is, you should be fine. My station is amazing. Let me know how you like that Soldapult.

I will. excited to start using these

Quote from: jdcarpe on Fri, 12 July 2013, 16:16:55

Yeah, the Yihua is no Hakko, but from what I've seen, it's probably 80% as good. And at only $15 ($30 shipped), it's an easy point of entry. I recommended it to him over the Weller WLC-100, because the Weller has no real temp setting, only a 1-5 variable control.
Dubs, did you get those 1.6mm chisel tips yet?

Only thing that hasn't arrived yet. shocking too, as they were from amazon. ill let you know when they arrive

Quote from: emptythecache on Fri, 12 July 2013, 16:22:43

My zonkey cables showed up today.
Show Image

(click for full album)

Nice that someone from GH got the zonkeys. what are you going to use them for? being micro to usb and all :)

Smeagol_RP · « **Reply #10020 on:** Fri, 12 July 2013, 16:48:06 »

Got my new personalized Ziploc slider bag by Ryan Uber.

More

Maybe he's trying to get the spring.

Dubsgalore · « **Reply #10021 on:** Fri, 12 July 2013, 16:48:55 »

Quote from: Binge on Fri, 12 July 2013, 09:09:29

Show Image

more 60% luvin :thumbsup:

Photoelectric · « **Reply #10022 on:** Fri, 12 July 2013, 16:49:26 »

Quote from: Smeagol_RP on Fri, 12 July 2013, 16:48:06

Got my new personalized Ziploc slider bag by Ryan Uber.

More
Show Image

Maybe he's trying to get the spring.

That's adorable :D

emptythecache · « **Reply #10023 on:** Fri, 12 July 2013, 16:56:59 »

Quote from: Dubsgalore on Fri, 12 July 2013, 16:32:01

Quote from: CPTBadAss on Fri, 12 July 2013, 15:57:16
Apparently that station is a clone of the Hakko 936 I have. If it is, you should be fine. My station is amazing. Let me know how you like that Soldapult.

I will. excited to start using these

Quote from: jdcarpe on Fri, 12 July 2013, 16:16:55
Yeah, the Yihua is no Hakko, but from what I've seen, it's probably 80% as good. And at only $15 ($30 shipped), it's an easy point of entry. I recommended it to him over the Weller WLC-100, because the Weller has no real temp setting, only a 1-5 variable control.
Dubs, did you get those 1.6mm chisel tips yet?

Only thing that hasn't arrived yet. shocking too, as they were from amazon. ill let you know when they arrive

Quote from: emptythecache on Fri, 12 July 2013, 16:22:43
My zonkey cables showed up today.
Show Image

(click for full album)

Nice that someone from GH got the zonkeys. what are you going to use them for? being micro to usb and all :)

I called and ordered custom mini ones instead. They were like a dollar more each.

Dubsgalore · « **Reply #10024 on:** Fri, 12 July 2013, 17:09:57 »

oh wow haha i didn't even notice that

i just recieved about 7 coiled cables in the last week...so i'm good on my fix...had i known when that thread started though...

looks good regardless

The_Ed · « **Reply #10025 on:** Fri, 12 July 2013, 17:13:27 »

$63.43 worth of 38mm epoxy resin trackball balls from Belgium. $23.59 of that was shipping to Keith, and then to me. The ****ty pic doesn't accurately portray the color...

damorgue · « **Reply #10026 on:** Fri, 12 July 2013, 17:26:49 »

Quote from: The_Ed on Fri, 12 July 2013, 17:13:27

$63.43 worth of 38mm epoxy resin trackball balls from Belgium. $23.59 of that was shipping to Keith, and then to me. The ****ty pic doesn't accurately portray the color...

Show Image

Sort of regret not getting one of those sensors from Kickstarter. Those projects look interesting. I am assuming that those are meant for a custom trackball?

The_Ed · « **Reply #10027 on:** Fri, 12 July 2013, 17:37:12 »

Quote from: damorgue on Fri, 12 July 2013, 17:26:49

Quote from: The_Ed on Fri, 12 July 2013, 17:13:27
$63.43 worth of 38mm epoxy resin trackball balls from Belgium. $23.59 of that was shipping to Keith, and then to me. The ****ty pic doesn't accurately portray the color...

Show Image

Sort of regret not getting one of those sensors from Kickstarter. Those projects look interesting. I am assuming that those are meant for a custom trackball?

The ball that comes in the Microsoft Trackball Optical has a mosaic pattern below a thin clear layer. That layer will likely confuse the new laser sensor module, thus I have gotten 1x 316 stainless steel, 1x 52100 chrome steel, and 3x epoxy resin trackball balls as alternatives.

You will be able to get a sensor in a few months after the first 2 batches are shipped.

esoomenona · « **Reply #10028 on:** Fri, 12 July 2013, 18:11:29 »

Quote from: The_Ed on Fri, 12 July 2013, 17:13:27

$63.43 worth of 38mm epoxy resin trackball balls from Belgium. $23.59 of that was shipping to Keith, and then to me. The ****ty pic doesn't accurately portray the color...

Show Image

Benoit?

nubbinator · « **Reply #10029 on:** Fri, 12 July 2013, 18:18:13 »

Quote from: esoomenona on Fri, 12 July 2013, 18:11:29

Quote from: The_Ed on Fri, 12 July 2013, 17:13:27
$63.43 worth of 38mm epoxy resin trackball balls from Belgium. $23.59 of that was shipping to Keith, and then to me. The ****ty pic doesn't accurately portray the color...

Show Image

Benoit?

Kegeling wasn't working?

The_Ed · « **Reply #10030 on:** Fri, 12 July 2013, 18:25:15 »

Quote from: esoomenona on Fri, 12 July 2013, 18:11:29

Benoit?

Quote from: nubbinator on Fri, 12 July 2013, 18:18:13

Kegeling wasn't working?

... Why did you make me google that?...

nubbinator · « **Reply #10031 on:** Fri, 12 July 2013, 18:27:09 »

Quote from: The_Ed on Fri, 12 July 2013, 18:25:15

Quote from: esoomenona on Fri, 12 July 2013, 18:11:29
Benoit?

Quote from: nubbinator on Fri, 12 July 2013, 18:18:13
Kegeling wasn't working?

... Why did you make me google that?...

No one made you do anything. Your curiosity got the best of you.

Tym · « **Reply #10032 on:** Fri, 12 July 2013, 18:28:13 »

Quote from: nubbinator on Fri, 12 July 2013, 18:27:09

Quote from: The_Ed on Fri, 12 July 2013, 18:25:15
Quote from: esoomenona on Fri, 12 July 2013, 18:11:29
Benoit?

Quote from: nubbinator on Fri, 12 July 2013, 18:18:13
Kegeling wasn't working?

... Why did you make me google that?...

No one made you do anything. Your curiosity got the best of you.

Bu...
Wait...
Never Mind...

mashby · « **Reply #10033 on:** Fri, 12 July 2013, 18:38:55 »

Nice one nubinator!

LOL!

CPTBadAss · « **Reply #10034 on:** Fri, 12 July 2013, 18:40:50 »

Quote from: nubbinator on Fri, 12 July 2013, 18:18:13

Kegeling wasn't working?

ROFL

SpAmRaY · « **Reply #10035 on:** Fri, 12 July 2013, 19:46:44 »

Pretty sure it's a fake. Anybody know how to tell?

Photoelectric · « **Reply #10036 on:** Fri, 12 July 2013, 20:01:47 »

Hrm, not sure... mine has a teal-blue container. I'll take a detailed photo.

ETA:

Could be an older design, as I got mine used from someone older. But perhaps some placement of logos will help.
ETA: Just had a look on the Edsyn website, and the newer model looks like yours: http://www.edsyn.com/index.php?Mode=piw&pn=DS017

calavera · « **Reply #10037 on:** Sat, 13 July 2013, 04:05:15 »

Usually ETA stands for Estimated Time of Arrival.. I don't know why you're using that for? Edited To Add?

Photoelectric · « **Reply #10038 on:** Sat, 13 July 2013, 08:59:13 »

Yes, it stands for both in case of online forums, depending on context.

zenuty · « **Reply #10039 on:** Sat, 13 July 2013, 09:16:45 »

Quote from: Dubsgalore on Fri, 12 July 2013, 15:43:26

Show Image

Poor Man's Solder Station has arrived :D

but seriously, i'm super pumped to finally get started on my own projects and being really productive
hopefully this is going to become much more then just building my own boards ;)

again, thanks jd for the advise!

Verry Jelous to you.

You have ultra assembly equipment :eek:

mashby · « **Reply #10040 on:** Sat, 13 July 2013, 12:14:20 »

PLU-87 from TheProfosist which is going to be parted for my Phantom build:

PLU-87 Unboxed by cpkey, on Flickr

I ordered a small supply of vintage MX-Black switches and springs from WhiskyTango on GeekHack. Unfortunately, USPS failed to deliver the package, even though it had tracking enabled. I figured that they were lost to the postal gremlins and that I would have to order them again some time in the future. WhiskyTango had other ideas. Without asking, he volunteered to replace my order the next time he salvaged vintage MX-Black switches -- free of charge. More details can be found here.

Thank you WhiskyTango!

Springs & Switches by cpkey, on Flickr

nubbinator · « **Reply #10041 on:** Sat, 13 July 2013, 13:01:11 »

GG WhiskeyTango (where in this case GG stands for great guy).

Thimplum · « **Reply #10042 on:** Sat, 13 July 2013, 16:23:56 »

Quote from: mashby on Sat, 13 July 2013, 12:14:20

More details can be found here.

Your BBCode for that looks like this: "More details can be found here."

I LOVE "http://"! It's a great site!

nubbinator · « **Reply #10043 on:** Sat, 13 July 2013, 17:07:51 »

Pure PCB and 100 each 2x3x4mm water clear blue and white LEDs:

I'm not at all happy with how tinlong packed the PCB (a sheet of paper wrapped around it loose in a box...exactly what you see in the pic), but as long as it works, I can't be too upset I suppose. Still, it's annoying, especially since there's also some copper oxidation on parts of the PCB.

Now the question is, which LEDs do I do, white, blue, pink, or some combo of the above? Maybe white alphas and pink mods?

Turkishrambo · « **Reply #10044 on:** Sat, 13 July 2013, 18:45:02 »

white alpha pink mods

Photoelectric · « **Reply #10045 on:** Sat, 13 July 2013, 18:49:49 »

I would get orange LEDs and do pink + orange! I definitely wouldn't mix pink with blue LEDs if it were my board. Either white/blue or white/pink. Unless the blue is more like Ducky blue--with an ultraviolet shade to it.

Sifo · « **Reply #10046 on:** Sat, 13 July 2013, 18:53:16 »

Bro......... blue and pink is the ****. All my boards are blue + pink DO IT I'm still waiting on a few pink LEDs.

Dubsgalore · « **Reply #10047 on:** Sat, 13 July 2013, 18:54:41 »

If you are getting miami, mimic the mockup there nubbs

The_Beast · « **Reply #10048 on:** Sat, 13 July 2013, 19:02:01 »

These:

Pretty legit!

MKULTRA · « **Reply #10049 on:** Sat, 13 July 2013, 19:02:18 »

Got a bunch of LEDs. Pretty boring so no picture.

News:

Author Topic: What did you get in the mail today? (Read 21263520 times)