Author Topic: FS: Phantom ANSI1.5 in italian red filco case (Read 8119 times)

demik · « **on:** Mon, 17 September 2012, 20:59:45 »

keycaps not included.

has stock blues but seeing as it's a phantom, you can switch out the springs/stems. also, it has costar stabilizers and not cherry. UV LEDs under caps/scroll lock and over the 6 pack.

current layout has control and capslock swapped.

open to offers.

oTurtlez · « **Reply #1 on:** Mon, 17 September 2012, 21:12:51 »

It's... Beautiful... if only it had browns :/

Tenkey · « **Reply #2 on:** Mon, 17 September 2012, 21:14:03 »

Are you willing to sell the phantom only? Don't really need the case...

demik · « **Reply #3 on:** Mon, 17 September 2012, 21:14:53 »

Quote from: oTurtlez on Mon, 17 September 2012, 21:12:51

It's... Beautiful... if only it had browns :/

so change it, that's the beauty of phantom!

Quote from: Tenkey on Mon, 17 September 2012, 21:14:03

Are you willing to sell the phantom only? Don't really need the case...

nope

boost · « **Reply #4 on:** Mon, 17 September 2012, 21:15:13 »

Just want the phantom, someone split this with me.

The_Beast · « **Reply #5 on:** Mon, 17 September 2012, 21:22:38 »

How about my love and admiration? Will that get me that purdy case with that fancy keyboard thingy?

oTurtlez · « **Reply #6 on:** Mon, 17 September 2012, 21:23:12 »

Quote from: boost on Mon, 17 September 2012, 21:15:13

Just want the phantom, someone split this with me.

If the case was green I would haha. I dont even know what a respectable offer for this would be though D:

boost · « **Reply #7 on:** Mon, 17 September 2012, 21:27:28 »

Got paint?

danielucf · « **Reply #8 on:** Mon, 17 September 2012, 21:30:19 »

What is a reasonable value for something like this? $175-200 without keycaps?

oTurtlez · « **Reply #9 on:** Mon, 17 September 2012, 21:31:53 »

Quote from: boost on Mon, 17 September 2012, 21:27:28

Got paint?

It seems like it was 125 for the entire thing no case. Assuming the case was around 60 I'm guessing, that totals 185. I might just be worth it to buy it all together. I'm kinda liking the phantom idea. Unfortunately my budget for my next KB is 130 shipped and I don't think it's going to go for that low. How much would I have to pay to split this with you boost?

boost · « **Reply #10 on:** Mon, 17 September 2012, 21:34:10 »

Quote from: oTurtlez on Mon, 17 September 2012, 21:31:53

Quote from: boost on Mon, 17 September 2012, 21:27:28
Got paint?

It seems like it was 125 for the entire thing no case. Assuming the case was around 60 I'm guessing, that totals 185. I might just be worth it to buy it all together. I'm kinda liking the phantom idea. Unfortunately my budget for my next KB is 130 shipped and I don't think it's going to go for that low. How much would I have to pay to split this with you boost?

Idk. Lmk.

oTurtlez · « **Reply #11 on:** Mon, 17 September 2012, 21:35:27 »

Quote from: boost on Mon, 17 September 2012, 21:34:10

Idk. Lmk.

PM'd

mmmty · « **Reply #12 on:** Mon, 17 September 2012, 21:36:45 »

I'll start off w/ $5

demik · « **Reply #13 on:** Mon, 17 September 2012, 21:37:00 »

Quote from: oTurtlez on Mon, 17 September 2012, 21:31:53

Quote from: boost on Mon, 17 September 2012, 21:27:28
Got paint?

It seems like it was 125 for the entire thing no case. Assuming the case was around 60 I'm guessing, that totals 185. I might just be worth it to buy it all together. I'm kinda liking the phantom idea. Unfortunately my budget for my next KB is 130 shipped and I don't think it's going to go for that low. How much would I have to pay to split this with you boost?

switches + stabilizers + alaric to building it didn't come free

and the italian red filco is a 165 dollar board (granted you wont get the original PCB, but that should knock 60 bucks off)

alixinhzai · « **Reply #14 on:** Mon, 17 September 2012, 21:39:39 »

oa oa, I need only phantom PCB and 1.5 ansi plate

(

JustCallMeCrash · « **Reply #15 on:** Tue, 18 September 2012, 10:09:51 »

I want to know if you're willing to part with the OEM Filco PCB.

alaricljs · « **Reply #16 on:** Tue, 18 September 2012, 10:10:20 »

He already did.

DanGWanG · « **Reply #17 on:** Tue, 18 September 2012, 10:10:38 »

NCR trade?

rayuki · « **Reply #18 on:** Tue, 18 September 2012, 10:13:16 »

willing to post internationally? not sure what to offer on this, will start at $150?

Sifo · « **Reply #19 on:** Tue, 18 September 2012, 10:13:20 »

I need this

I guess I'll make an offer when I'm home if it isn't gone by then.

m00nshake · « **Reply #20 on:** Tue, 18 September 2012, 11:19:26 »

GLWS, Demik! That is a beautiful board!

metalliqaz · « **Reply #21 on:** Tue, 18 September 2012, 11:40:23 »

Very nice hardware. Is this a sale or auction?

demik · « **Reply #22 on:** Tue, 18 September 2012, 19:59:46 »

sorry for not responding brochachos, was busy at work.

anyway, it's pending.

zzAaron · « **Reply #23 on:** Wed, 19 September 2012, 00:46:56 »

sexyyyyy

kaiserreich · « **Reply #24 on:** Wed, 19 September 2012, 02:43:04 »

Would you mind telling how much this went for, when everything is done?

Silit · « **Reply #25 on:** Wed, 19 September 2012, 03:57:22 »

What type of keycaps are those, and how do I get them?

longweight · « **Reply #26 on:** Wed, 19 September 2012, 03:58:13 »

Those are Red Alert 2.0 with a tsangan kit. You can't get them unless someone sells you their set.

Silit · « **Reply #27 on:** Wed, 19 September 2012, 04:09:12 »

Thanks.

longweight · « **Reply #28 on:** Wed, 19 September 2012, 04:10:06 »

I have a set for trade or maybe sale, PM me a trade offer if you like

m00nshake · « **Reply #29 on:** Wed, 19 September 2012, 09:40:22 »

Quote from: longweight on Wed, 19 September 2012, 04:10:06

I have a set for trade or maybe sale, PM me a trade offer if you like

*cough* pm sent. *cough*

demik · « **Reply #30 on:** Wed, 19 September 2012, 11:12:56 »

WhiteFireDragon · « **Reply #31 on:** Thu, 20 September 2012, 00:27:49 »

Quote from: kaiserreich on Wed, 19 September 2012, 02:43:04

Would you mind telling how much this went for, when everything is done?

Not gonna speak for demik, but I know it's not "cheap". Everything you see from the KB is pretty much hard to get. Offers like $150, I consider those lowball offers lol.

kaiserreich · « **Reply #32 on:** Thu, 20 September 2012, 03:27:01 »

Quote from: WhiteFireDragon on Thu, 20 September 2012, 00:27:49

Quote from: kaiserreich on Wed, 19 September 2012, 02:43:04
Would you mind telling how much this went for, when everything is done?
Not gonna speak for demik, but I know it's not "cheap". Everything you see from the KB is pretty much hard to get. Offers like $150, I consider those lowball offers lol.

Everyone knows that it is not cheap.
The boards, switches and plate cost at least $150. Not to mention the case, keycaps and the workmanship put into the assembly of the board.

Hence, I am curious about how much an assembled Phantom goes for.

News:

Author Topic: FS: Phantom ANSI1.5 in italian red filco case (Read 8119 times)