Author Topic: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time  (Read 367101 times)

0 Members and 1 Guest are viewing this topic.

Offline karljs

  • Posts: 84
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1150 on: Sun, 10 February 2013, 14:16:57 »
Is it too late to add to my existing order?  I'd like to add both RoW and RoG modifiers, if possible.  Maybe it will help offset the people who are not providing Paypal info  :p

Offline ApocalypseMaow

  • Kitteh Overlord
  • Posts: 1877
  • Location: Arkansas
  • Say WHAAT...
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1151 on: Sun, 10 February 2013, 14:51:27 »
Well if some other folks back out I wouldn't mind picking up an extra set or two...
{WTT}HoffNudes(WTS)BLK LightSaverV2         
"#baby****fangerz" -Vesper 2015

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1152 on: Sun, 10 February 2013, 15:09:15 »
Is it too late to add to my existing order?  I'd like to add both RoW and RoG modifiers, if possible.  Maybe it will help offset the people who are not providing Paypal info  :p

Done.

Offline FabsSpeed

  • Posts: 176
  • Location: Germany
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1153 on: Sun, 10 February 2013, 15:10:18 »
Did you get My order?
| Wanted: KMAC  & KMAC 1.2, 356 Mini, 456 GT |

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1154 on: Sun, 10 February 2013, 15:11:19 »
Did you get My order?

Yes, but need your paypal email address.

Offline FabsSpeed

  • Posts: 176
  • Location: Germany
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1155 on: Sun, 10 February 2013, 15:20:08 »
| Wanted: KMAC  & KMAC 1.2, 356 Mini, 456 GT |

Offline fydo

  • Posts: 186
  • Location: Alberta, Canada
  • Meow!
[GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1156 on: Sun, 10 February 2013, 16:05:31 »
I know I've already modified my order a bazillion times, but it would be awesome if you could add a WoR modifers set to my order. Pretty please! :)
CoolerMaster Quickfire Rapid | Ducky Shine II (White LED)

Offline do_Og@n

  • * Maker
  • Posts: 988
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1157 on: Sun, 10 February 2013, 17:09:23 »
Last question just to clear my own confusion.

Do the Base Kits come with the modifiers?

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1158 on: Sun, 10 February 2013, 17:11:36 »
Last question just to clear my own confusion.

Do the Base Kits come with the modifiers?

No

Offline okooko

  • Posts: 476
  • Location: Australia
  • afk.
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1159 on: Sun, 10 February 2013, 17:16:45 »
PM sent re: payment etc.

Offline megaforce

  • Posts: 1087
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1160 on: Sun, 10 February 2013, 18:43:25 »
Last question just to clear my own confusion.

Do the Base Kits come with the modifiers?

No


I assumed the base kit included mods, so I'll need to overhaul my order:

Add:
RoW Mods

Remove:
WoR-Base
RoG- Base

Please and thank you! :)
« Last Edit: Sun, 10 February 2013, 18:46:55 by megaforce93 »
Corsair K63 Wireless | Razer Huntsman Elite
More
Hokusai | Ogre| Yohane | Mc65 | Kaze | RBB
Former: LZ MX | LZ FE | LZ CLS TKL Silver |LZ CLS TKL Gray| LZ St | V.EA | Blackbird | LSV3 | OctagonV2 | Norbatouch | X60 | TX84 | Kyuu | SSK | 268.1| Jane CE | Corsair K95 | X60R | HHKB JP x JS HiPro | 910 CE |Nunu |Nunu FE | Jane V2 CE|Jane V2| RS (TKL)


Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1161 on: Mon, 11 February 2013, 00:09:29 »
List of PM notseers inc in morning.

Offline damorgue

  • Posts: 1176
  • Location: Sweden
    • Personal portfolio
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1162 on: Mon, 11 February 2013, 00:28:40 »
I still want to know if the colour I ordered was scrapped or not.

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1163 on: Mon, 11 February 2013, 00:35:16 »
Do you mean for an ISO kit? It's, as of now and before, WoR only. 

In fact, I don't think that MoQ(as in, at least 10 people requesting it) has been met for those that want RoW ISO and my solutions to get it and RoG included have been combated.

Offline maxmalkav

  • Posts: 110
  • Location: Netherlands
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1164 on: Mon, 11 February 2013, 11:36:55 »
@tjcaustin

aMaNeCeR_ and I want to join our orders in a single one and thus make a single shipment to Spain. We have sent you two PM with the details.

Thanks!

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1165 on: Mon, 11 February 2013, 13:12:47 »
I have it notated.

Offline blighty

  • Posts: 403
  • Location: New York, USA
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1166 on: Mon, 11 February 2013, 14:17:33 »
Quote
Here is the current count link, updated as people fill the form - https://docs.google.com/spreadsheet/ccc?key=0AogGyDQAChFrdGlZTm5WS2YwWnQ1bDQ3Y3gxZ3c1cGc

You might want to edit out Column "I" on the spreadsheet.  TMI going on there (personal info)  :))
« Last Edit: Mon, 11 February 2013, 14:20:57 by blighty »
LZ ergo (MX silent red) | JER - A06 (MX silent black-red springs) | Duck Lightsaver V2 (MX red) | Duck Octagon V2 (gateron clear) (lifted pads) | Duck Orion V2 (gateron red) | TKC 1800 (gateron silent reds) | Mistel MD770 (MX red with GMK silencing clips) | Realforce R2TSLA-US4-IV | Realforce R2TLSA-US4-BK | TX 75 (gateron clear) | KBDFANS 75 ("vintage" MX blues) | Kinesis Freestyle Pro (MX red) | MS Surface Ergonomic | MS Natural Ergonomic Keyboard 4000 | Filco Majestouch 2 TKL (MX black) | Phantom (Filco case) ("vintage" MX blacks | Spr1t 75% PCB x 2 (MX black and gateron clear) | Cherry G80-1865 (MX browns with black springs)

Offline Mysteric

  • Formerly 'Mackem'
  • Posts: 241
  • Location: United Kingdom
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1167 on: Mon, 11 February 2013, 15:26:41 »
Something's come up, I'm out. Sorry.

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1168 on: Mon, 11 February 2013, 16:17:29 »
Alrighty, hounds are released.

The following list are the people that are holding up invoice and payment activities, they've been sent one more PM and I'll be removing their orders and adjusting tiers if they do not respond in the next 3 days.

4en
akimbo
Asp
catcherintherye
Chicken Chaser
chopindong
damorgue
dragonken
eNrageDSainT
EZalybored
gilgam
gnusead
Goliath
GoodKnight
ImaMoFoThief
iWuzHere
KIM MINCHUL
Kyorenwang
magey
Mmmbacon
peizilla
poopmat
RAISTLIN_TM
rayuki
remedyhalopc
sherryton(big loss.  10 sets canceled)
SurgeonKyle
Tendril
thomas318
voice
vultures
Womble
ygong77

I'll edit this list as people contact me.
« Last Edit: Thu, 14 February 2013, 01:03:12 by tjcaustin »

Offline Chicken Chaser

  • Posts: 81
  • Location: Los Angeles, CA
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1169 on: Mon, 11 February 2013, 16:19:38 »
Shoot, I totally forgot I even ordered. O_O
Leopold TKL Blues || Leopold TKL Reds || Filco TKL Ninja Browns

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1170 on: Mon, 11 February 2013, 16:22:56 »
Shoot, I totally forgot I even ordered. O_O

Order PMed.

Offline takaki

  • Posts: 181
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1171 on: Tue, 12 February 2013, 01:37:09 »
Hi,

I've ordered and send you a order revision but I have yet to receive any form of invoice.

Offline GeorgeK

  • Posts: 758
  • Location: Ashford, Kent, United Kingdom
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1172 on: Tue, 12 February 2013, 02:34:34 »
Nobody has received invoices yet - I believe that tj will send them out after hearing from the list of people above (or not hearing from them, deleting them from the list and then readjusting tiers)
Black Filco TKL - Stickered, Lubed Reds || Poker w/Plate, Alu Case -  Stickered, Lubed 65g Ergo-Clears || Cherry G80-3700 w/SS Plate - Lubed 65g Ergo-Clears

Offline do_Og@n

  • * Maker
  • Posts: 988
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1173 on: Tue, 12 February 2013, 05:07:16 »
Nobody has received invoices yet - I believe that tj will send them out after hearing from the list of people above (or not hearing from them, deleting them from the list and then readjusting tiers)

Good to know. :)

Offline LechnerDE

  • * Esteemed Elder
  • Posts: 2631
  • Location: Germany
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1174 on: Tue, 12 February 2013, 08:11:56 »
Alrighty, hounds are released.

The following list are the people that are holding up invoice and payment activities, they've been sent one more PM and I'll be removing their orders and adjusting tiers if they do not respond in the next 3 days.

4en
akimbo
Asp
catcherintherye
Chicken Chaser
chopindong
damorgue
dragonken
eNrageDSainT
EZalybored
gilgam
gnusead
Goliath
GoodKnight
ImaMoFoThief
iWuzHere
KIM MINCHUL
Kyorenwang
magey
Mmmbacon
peizilla
poopmat
RAISTLIN_TM
rayuki
remedyhalopc
sherryton(big loss.  10 sets canceled)
SurgeonKyle
Tendril
thomas318
voice
vultures
Womble
ygong77

I'll edit this list as people contact me.

Hey  tjcaustin,

I am a bit confused right now. I haven't received a PM yet and am not on the above list either. Is my order still registered correctly?

I filled out the form on Sunday, 3rd February (reply #965 in this thread). I am #153 in the spreadsheet on page 1 of this thread.

I want the following key caps:

1x Base Kit RedOnWhite
1x Modifier Kit RedOnWhite
1x Modifier Kit WhiteOnRed
1x 17 Key Kit RedOnWhite
1x ISO Kit

and 1 change please:

1x Tsangan Kit WhiteOnRed    (NOT RedOnWhite anymore !!)

Shipping:      International (to Germany)

I am new here and it’s my first group buy. I don’t wanna screw things up ‘cause I miss something. Can you please check again whether my order is still listed?

I would love to throw my money at you :)
« Last Edit: Tue, 12 February 2013, 08:20:31 by LechnerDE »

Offline LechnerDE

  • * Esteemed Elder
  • Posts: 2631
  • Location: Germany
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1175 on: Tue, 12 February 2013, 08:17:50 »
Nobody has received invoices yet - I believe that tj will send them out after hearing from the list of people above (or not hearing from them, deleting them from the list and then readjusting tiers)

Oh ... I didn't see this post before I made the above post. I just panicked after seeing that list of people - I sure don't wanna miss this set!

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1176 on: Tue, 12 February 2013, 11:33:09 »
Nobody has received invoices yet - I believe that tj will send them out after hearing from the list of people above (or not hearing from them, deleting them from the list and then readjusting tiers)

Oh ... I didn't see this post before I made the above post. I just panicked after seeing that list of people - I sure don't wanna miss this set!

You're fine, that list is for people that did not fill the second form out and I needed their paypal emails.  The good news is I've got about half that have responded already.

Offline LechnerDE

  • * Esteemed Elder
  • Posts: 2631
  • Location: Germany
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1177 on: Tue, 12 February 2013, 11:50:29 »
Nobody has received invoices yet - I believe that tj will send them out after hearing from the list of people above (or not hearing from them, deleting them from the list and then readjusting tiers)

Oh ... I didn't see this post before I made the above post. I just panicked after seeing that list of people - I sure don't wanna miss this set!

You're fine, that list is for people that did not fill the second form out and I needed their paypal emails.  The good news is I've got about half that have responded already.

Ah ok, thanks for your fast reply!

Have you changed my order for the one Tsangan Kit?

Offline GeorgeK

  • Posts: 758
  • Location: Ashford, Kent, United Kingdom
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1178 on: Tue, 12 February 2013, 11:56:57 »
Nothing like a good name and shame!
Black Filco TKL - Stickered, Lubed Reds || Poker w/Plate, Alu Case -  Stickered, Lubed 65g Ergo-Clears || Cherry G80-3700 w/SS Plate - Lubed 65g Ergo-Clears

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1179 on: Tue, 12 February 2013, 12:03:23 »
Nobody has received invoices yet - I believe that tj will send them out after hearing from the list of people above (or not hearing from them, deleting them from the list and then readjusting tiers)

Oh ... I didn't see this post before I made the above post. I just panicked after seeing that list of people - I sure don't wanna miss this set!

You're fine, that list is for people that did not fill the second form out and I needed their paypal emails.  The good news is I've got about half that have responded already.

Ah ok, thanks for your fast reply!

Have you changed my order for the one Tsangan Kit?

I have

Offline samwisekoi

  • MAWG since 1997
  • * Administrator
  • Posts: 2480
  • Location: Mt. View, California
  • Sorry, moving houses. Be back ASAP.
    • Tweet samwisekoi
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1180 on: Tue, 12 February 2013, 12:56:45 »
Klaxon Auxiliary Keycap Group Buy is UP!

http://geekhack.org/index.php?topic=40210.0

 - Ron | samwisekoi
I like keyboards and case modding.  Everything about a computer should be silent -- except the KEYBOARD!

'85 IBM F-122/Soarer Keyboard |  Leopold FC200 TKL (Browns) + GH36 Keypad (Browns/Greens) | GH-122 (Whites/Greens) with Nuclear Data Green keycaps in a Unicomp case

Offline boost

  • BOSTMOBILE
  • * Elevated Elder
  • Posts: 3300
  • NY Giants!!!
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1181 on: Tue, 12 February 2013, 12:58:14 »
Klaxon Auxiliary Keycap Group Buy is UP!

http://geekhack.org/index.php?topic=40210.0

 - Ron | samwisekoi
Show Image


It's up now :P
"Aerodynamics are for people who can't build engines."

-Enzo Ferrari

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1182 on: Tue, 12 February 2013, 19:02:18 »
Two days left for the people on my list.  For the greater good of the buy, please use some haste and get back to me.

Additionally, if 10 people will pay, I'll obviously have no problem offering anything, including RoW ISO kits.  But that, as always, depends on there being enough people to fill an MoQ.

Offline Leewei

  • Posts: 288
  • Location: United States
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1183 on: Tue, 12 February 2013, 19:27:17 »
heya tj, my e-mail got hacked. i will send you my new paypal e-mail.
Filco Majestouch 2 Beige TKL with MX Reds
Qsenn dt-35

Offline jdcarpe

  • * Curator
  • Posts: 8852
  • Location: Odessa, TX
  • Live long, and prosper.
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1184 on: Tue, 12 February 2013, 19:46:20 »
Additionally, if 10 people will pay, I'll obviously have no problem offering anything, including RoW ISO kits.  But that, as always, depends on there being enough people to fill an MoQ.

Dude, this buy is closed. It's way too late for people to start trying to hit an MOQ for something. If you don't keep your hard deadline, you'll never get payments and get the order in.

Not a criticism, just saying. :)
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1185 on: Tue, 12 February 2013, 19:52:56 »
heya tj, my e-mail got hacked. i will send you my new paypal e-mail.

Coo'

Offline remedyhalopc

  • Posts: 215
[GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1186 on: Wed, 13 February 2013, 02:24:32 »
Sent you my PayPal info. Sorry for the delay.

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1187 on: Wed, 13 February 2013, 12:17:56 »
Looks like 21 people left to contact me in the next 24 hours.

Fortunately, tiers won't drop significantly.

Offline samwisekoi

  • MAWG since 1997
  • * Administrator
  • Posts: 2480
  • Location: Mt. View, California
  • Sorry, moving houses. Be back ASAP.
    • Tweet samwisekoi
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1188 on: Wed, 13 February 2013, 12:31:11 »
Also looks like the Klaxon Aux buy for blank keycaps won't happen.  We are up to TWO sets total.

 - Ron | samwisekoi
I like keyboards and case modding.  Everything about a computer should be silent -- except the KEYBOARD!

'85 IBM F-122/Soarer Keyboard |  Leopold FC200 TKL (Browns) + GH36 Keypad (Browns/Greens) | GH-122 (Whites/Greens) with Nuclear Data Green keycaps in a Unicomp case

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1189 on: Wed, 13 February 2013, 12:32:00 »
Ouch XD

Offline inteli722

  • Posts: 858
  • Location: America
  • Waiting for too much stuff...
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1190 on: Wed, 13 February 2013, 13:13:38 »
OK! What smart*ss changed every klaxon in this thread to a klaxon sound effect???

Anyways, I would buy from that Auxillary GB if it weren't so dang expensive right now.
« Last Edit: Wed, 13 February 2013, 13:44:19 by rknize »
More

Visit the Typing Test and try!
R.I.P. SmallFry! You will be dearly missed.
Leopold FC200 |  CoolerMaster QFP Browns | Quickfire Rapid Greens | Quickfire Rapid Blues
Waiting for: Phantom Plate

Offline jwaz

  • * based mod
  • Posts: 2069
  • #geekhack on freenode
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1191 on: Wed, 13 February 2013, 13:36:07 »
OK! What smart*ss changed every klaxon in this thread to a klaxon sound effect???

Anyways, I would buy from that Auxillary GB if it weren't so dang expensive right now.

What are you talking about? I didn't notice anything


COUGHklaxonCOUGH
« Last Edit: Wed, 13 February 2013, 13:44:33 by rknize »

Offline Rendom

  • Posts: 362
  • Location: Australia
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1192 on: Wed, 13 February 2013, 13:39:58 »
Is the invoice out ?
« Last Edit: Wed, 13 February 2013, 13:44:26 by rknize »
QFR - MX Blue

Offline rknize

  • * Administrator
  • Posts: 1731
  • Location: Chicago
    • metaruss
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1193 on: Wed, 13 February 2013, 13:48:38 »
OK! What smart*ss changed every klaxon in this thread to a klaxon sound effect???

Just having a little fun with the oft-mentioned klaxon GB.  ;)  All done now.  GLWGB!
« Last Edit: Wed, 13 February 2013, 13:56:38 by rknize »
Russ

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1194 on: Wed, 13 February 2013, 15:20:17 »
Is the invoice out ?

1 -2 days still.  Waiting on procrastinators.

Offline tauburn

  • Posts: 447
  • Location: Philadelphia
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1195 on: Wed, 13 February 2013, 15:23:52 »
so aside from the shipping fee and actual prices of keysets, will there be any fees? if so how much?

Offline Rendom

  • Posts: 362
  • Location: Australia
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1196 on: Wed, 13 February 2013, 15:24:56 »
Is the invoice out ?

1 -2 days still.  Waiting on procrastinators.

I see. Thank you!
QFR - MX Blue

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1197 on: Wed, 13 February 2013, 15:44:21 »
so aside from the shipping fee and actual prices of keysets, will there be any fees? if so how much?

Paypal fees of the usual sort
Sorting fee from SP - $2
Subsidy for my caps and those who ordered RoG base kits ($4.50)NOTE: This may change, depending on final total order number count.
Geekhack pack - $2/pack All invoices will include one pack charged (this is completely voluntary and can be removed)

So before keys or shipping, there's $8.50 in fees and assorted costs.
« Last Edit: Wed, 13 February 2013, 15:47:04 by tjcaustin »

Offline Sai

  • Posts: 820
  • Location: SG
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1198 on: Wed, 13 February 2013, 19:08:57 »
don't want to read the thread again. so i'll ask here instead. ;D
Geekhack pack will include all 3 colors ?
- WTB/WTT - Cotton Candy Brobot V2

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1199 on: Wed, 13 February 2013, 19:23:43 »
Yep, and you can order more than one pack, too.