Author Topic: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time  (Read 410584 times)

0 Members and 1 Guest are viewing this topic.

Offline i488

  • Posts: 145
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1600 on: Tue, 26 March 2013, 21:49:10 »
Turns out I was a week early in my celebrations, it's coming to me starting this thursday.
oh yes. I did make all the payment, didnt I?
Have i paid for the shipping difference yet?

Offline tauburn

  • Posts: 447
  • Location: Philadelphia
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1601 on: Tue, 26 March 2013, 22:34:57 »
Turns out I was a week early in my celebrations, it's coming to me starting this thursday.

i knew something like this was going to happen. DAMN IT MELISSA

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1602 on: Tue, 26 March 2013, 23:34:18 »
Turns out I was a week early in my celebrations, it's coming to me starting this thursday.
oh yes. I did make all the payment, didnt I?
Have i paid for the shipping difference yet?

Yeah, you're good.

Offline Jupiter

  • Posts: 155
  • Location: Melbourne
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1603 on: Wed, 27 March 2013, 03:09:27 »
Turns out I was a week early in my celebrations, it's coming to me starting this thursday.

Pfft, still earlier than previous best-estimates. I just wish other group buys we're run this awesomely

*looks at Phantom Parts GB page...*
(Going to be) building Phantom - Red MDPC / White Heatshrink Pexon Cable - WoR/RoW Klaxon - Shiny Titanium Spacebar - Titanium Zerg key

Offline Saclet

  • Posts: 32
  • Location: United States
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1604 on: Thu, 28 March 2013, 00:44:47 »
Turns out I was a week early in my celebrations, it's coming to me starting this thursday.

So you will start shipping them out the week after next week?

Offline akuJIWA

  • Posts: 472
  • Location: Australia
  • Lock 'N Load!
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1605 on: Thu, 28 March 2013, 03:45:20 »
I am looking for RoG set, wasn't able to pay due to busy and never really got on paypal and geekhack to check. If anyone has extra set, let me know. Thanks.
The Cheat - B/R/B ; Clear switch with 62g springs

quit

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1606 on: Thu, 28 March 2013, 13:42:32 »
I am looking for RoG set, wasn't able to pay due to busy and never really got on paypal and geekhack to check. If anyone has extra set, let me know. Thanks.

Just got an email from Melissa about spares and there's a RoG base/mod available to buy.  I'll resend your invoice.

Offline elton5354

  • Posts: 2232
  • Location: Canada
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1607 on: Thu, 28 March 2013, 13:57:06 »
Is there an extra set of WoR Tsangans? Thanks

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1608 on: Thu, 28 March 2013, 14:05:18 »
Also, if anyone wants, here are extras that can be purchased:
1 Red on White Modifier Sets
1 GH Packs

Pics inc.

All but spares are being shipped today, but I do want to pick up all of those spares you see and will, but I'd like as many as possible to be pre-sold.  List will disappear as stuff is sold.

Note: The whites in these especially look all funky, but these are effectively potato pics on the production line.  I just got a new camera and will try to get some good stuff if you all want when I have caps in hand.








« Last Edit: Fri, 29 March 2013, 21:31:50 by tjcaustin »

Offline MKULTRA

  • Posts: 1197
  • Location: IN
  • telling it how it is
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1609 on: Thu, 28 March 2013, 14:23:53 »
Wait are these being shipped directly from SP?  Thought you were sorting yourself.

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1610 on: Thu, 28 March 2013, 14:28:46 »
No, they're being shipped to me today.

Offline LechnerDE

  • * Esteemed Elder
  • Posts: 2631
  • Location: Germany
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1611 on: Thu, 28 March 2013, 14:37:49 »
Will the numpad look like on your picture or will it be like this



with alternating enter key, etc.


If it is only one color per set, I want that extra white on red numpad set :)
« Last Edit: Thu, 28 March 2013, 14:43:19 by LechnerDE »

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1612 on: Thu, 28 March 2013, 14:47:44 »
They're solid like the pic I posted.  Inv coming soon.

Offline LechnerDE

  • * Esteemed Elder
  • Posts: 2631
  • Location: Germany
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1613 on: Thu, 28 March 2013, 14:52:23 »
They're solid like the pic I posted.  Inv coming soon.

Thanks!

Lucky me - last minute rescue order :D

Offline elton5354

  • Posts: 2232
  • Location: Canada
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1614 on: Thu, 28 March 2013, 14:52:45 »


Show Image



RoW - red legends on white cap
WoR - white legends on red cap

or is it the other way around like the pic is showing? :O

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1615 on: Thu, 28 March 2013, 14:55:47 »
looks like they transposed the kits in the picture.

Offline LechnerDE

  • * Esteemed Elder
  • Posts: 2631
  • Location: Germany
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1616 on: Thu, 28 March 2013, 15:21:28 »
Paid the numpad set - can't wait until I can finally put those caps on my boards :)

Offline phx

  • Posts: 361
  • Location: Boston, Massachusetts
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1617 on: Thu, 28 March 2013, 15:39:02 »
woah, the gray caps look a lot darker than I expected :\

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1618 on: Thu, 28 March 2013, 15:41:20 »

Note: The whites in these especially look all funky, but these are effectively potato pics on the production line.  I just got a new camera and will try to get some good stuff if you all want when I have caps in hand.


Offline GeorgeK

  • Posts: 758
  • Location: Ashford, Kent, United Kingdom
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1619 on: Thu, 28 March 2013, 17:03:18 »
Black Filco TKL - Stickered, Lubed Reds || Poker w/Plate, Alu Case -  Stickered, Lubed 65g Ergo-Clears || Cherry G80-3700 w/SS Plate - Lubed 65g Ergo-Clears

Offline whiskytango

  • Posts: 576
  • Location: Birmingham, Alabama
  • Don't touch the trim
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1620 on: Thu, 28 March 2013, 18:31:11 »
pm sent on one each of extra RoW base and RoW numpad
I stay busy with work and family these days, but I'm still around, lurking.

Offline akuJIWA

  • Posts: 472
  • Location: Australia
  • Lock 'N Load!
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1621 on: Thu, 28 March 2013, 19:07:22 »
I am looking for RoG set, wasn't able to pay due to busy and never really got on paypal and geekhack to check. If anyone has extra set, let me know. Thanks.

Just got an email from Melissa about spares and there's a RoG base/mod available to buy.  I'll resend your invoice.

Thank you bro, PM incoming.
The Cheat - B/R/B ; Clear switch with 62g springs

quit

Offline kaiserreich

  • HHKB Elite
  • Posts: 880
  • Location: Malaysia
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1622 on: Thu, 28 March 2013, 19:13:09 »
Is the Grey darker that RA2.0?
Seems to me that it is

Offline jdcarpe

  • * Curator
  • Posts: 8852
  • Location: Odessa, TX
  • Live long, and prosper.
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1623 on: Thu, 28 March 2013, 19:44:18 »
Is the Grey darker that RA2.0?
Seems to me that it is

Yes, it's most definitely much darker. That's what I told everyone, and they voted for this grey anyway. :)
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline fydo

  • Posts: 186
  • Location: Alberta, Canada
  • Meow!
[GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1624 on: Thu, 28 March 2013, 19:54:54 »
Wow, these caps are looking great! I can't wait to throw mine onto my Ducky! :D
CoolerMaster Quickfire Rapid | Ducky Shine II (White LED)

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1625 on: Thu, 28 March 2013, 20:14:17 »
Is the Grey darker that RA2.0?
Seems to me that it is

Yes, it's most definitely much darker. That's what I told everyone, and they voted for this grey anyway. :)

And I'm glad they did cause it looks hawt.

Offline brianvoo

  • Posts: 58
  • Location: Malaysia
  • Poisoned
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1626 on: Thu, 28 March 2013, 20:26:31 »
It does look hawt, really hawt.

Offline TypoVampire

  • Posts: 27
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1627 on: Thu, 28 March 2013, 20:55:29 »
Just a note to remember that my B Series has to be shipped  with this one too ^^ thanks

Offline jdcarpe

  • * Curator
  • Posts: 8852
  • Location: Odessa, TX
  • Live long, and prosper.
[GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1628 on: Thu, 28 March 2013, 20:59:09 »
Just a note to remember that my B Series has to be shipped  with this one too ^^ thanks

I know he has several shipping together. And even some with B-series AND DSA Retro :)
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline Turkishrambo

  • Posts: 483
  • Location: ontario canada
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1629 on: Thu, 28 March 2013, 21:10:06 »
omggg i cant wait to get my RoW base and RoG mods..+ whatever else i got. thanks for the pics TJ! :D
« Last Edit: Thu, 28 March 2013, 21:12:05 by Turkishrambo »

Offline GeorgeK

  • Posts: 758
  • Location: Ashford, Kent, United Kingdom
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1630 on: Fri, 29 March 2013, 04:22:18 »
Just a note to remember that my B Series has to be shipped  with this one too ^^ thanks

I know he has several shipping together. And even some with B-series AND DSA Retro :)

That sounds just like my order!
Black Filco TKL - Stickered, Lubed Reds || Poker w/Plate, Alu Case -  Stickered, Lubed 65g Ergo-Clears || Cherry G80-3700 w/SS Plate - Lubed 65g Ergo-Clears

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1631 on: Fri, 29 March 2013, 21:34:06 »
Well all of that went quick.

Offline MKULTRA

  • Posts: 1197
  • Location: IN
  • telling it how it is
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1632 on: Fri, 29 March 2013, 22:31:04 »
Well all of that went quick.
all sorted and ready to go eh!!!

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1633 on: Fri, 29 March 2013, 23:12:22 »
No, I meant selling the spares.

Offline tauburn

  • Posts: 447
  • Location: Philadelphia
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1634 on: Fri, 29 March 2013, 23:28:41 »

Offline MKULTRA

  • Posts: 1197
  • Location: IN
  • telling it how it is
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1635 on: Fri, 29 March 2013, 23:29:17 »
A man can always dream

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1636 on: Fri, 29 March 2013, 23:33:22 »
No, I meant selling the spares.

Show Image


Allow me to rephrase slightly, the spare kits that I purchased have been paid for by other willing parties, unless they're additions to current orders, there will be no sherryton situation of spares going to people before GB kits.

Offline tauburn

  • Posts: 447
  • Location: Philadelphia
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1637 on: Sat, 30 March 2013, 00:03:38 »
No, I meant selling the spares.

Show Image


Allow me to rephrase slightly, the spare kits that I purchased have been paid for by other willing parties, unless they're additions to current orders, there will be no sherryton situation of spares going to people before GB kits.

you just need to sit down and force yourself to be able to bend time so we can get it sooner.

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1638 on: Sat, 30 March 2013, 00:30:06 »
Working on it.  It takes time to master though

Offline Sephiroth

  • Posts: 37
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1639 on: Sat, 30 March 2013, 20:32:51 »
Tj, can i get my stuff before May? lol

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1640 on: Sat, 30 March 2013, 20:35:48 »
Tj, can i get my stuff before May? lol

Just because you asked, you'll get it before May.

May 2014.

Offline Sephiroth

  • Posts: 37
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1641 on: Sun, 31 March 2013, 01:20:50 »
Tj, can i get my stuff before May? lol

Just because you asked, you'll get it before May.

May 2014.

QQ  come on dude....

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
I've got 99 problems...
« Reply #1642 on: Wed, 03 April 2013, 14:30:32 »
If you didn't get RoG or WoR keys, I feel bad for you son; I got 99 problems, but a bad looking keyboard ain't one:





Offline inteli722

  • Posts: 858
  • Location: America
  • Waiting for too much stuff...
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1643 on: Wed, 03 April 2013, 14:32:26 »
Ooh. Those look amazing (especially the Red on Grey. So glad I got some!)

Shipping ETA?
More

Visit the Typing Test and try!
R.I.P. SmallFry! You will be dearly missed.
Leopold FC200 |  CoolerMaster QFP Browns | Quickfire Rapid Greens | Quickfire Rapid Blues
Waiting for: Phantom Plate

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1644 on: Wed, 03 April 2013, 14:35:15 »
I'll start boxing/sorting today and see where I end up from there.  Hopefully no later than a week, aiming for by the weekend.

Offline noisyturtle

  • * Exalted Elder
  • Posts: 6497
  • comfortably numb
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1645 on: Wed, 03 April 2013, 14:47:26 »
It's happening! Unholy zombie Moses it's happening!

Offline jdcarpe

  • * Curator
  • Posts: 8852
  • Location: Odessa, TX
  • Live long, and prosper.
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1646 on: Wed, 03 April 2013, 14:57:53 »
Dat WoR! :eek:
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline Halverson

  • Traitor Supreme
  • Posts: 6811
  • GIRLSHARK WIZBRO
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1647 on: Wed, 03 April 2013, 15:01:52 »
I hear shark-like humanoids from Canada get RoG sets before anyone else. I don't think anyone would disagree with that :D

Offline Jocelyn

  • Posts: 1608
  • Location: Orlando, FL
  • 조셀린
Re: Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1648 on: Wed, 03 April 2013, 15:06:06 »
Show Image


They all look nice, but wow that WoR with Poker/CNC case looks very nice!

I hear shark-like humanoids from Canada get RoG sets before anyone else. I don't think anyone would disagree with that :D

No disagreements here :)
« Last Edit: Wed, 03 April 2013, 15:10:37 by Jocelyn »

Offline danielucf

  • Horrible Mailman
  • * Elevated Elder
  • Posts: 2479
  • Location: Orlando
  • Hmmmm beer.
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1649 on: Wed, 03 April 2013, 15:06:45 »
After those pictures I'm glad I pushed so hard for RoG to be completed. It'll go straight onto my MX Mini and look almost exactly like tj's
VE.A 67g Zealios | GH60 MX Clears |