Author Topic: Dolch - ebay BIN (Read 3369 times)

precarious · « **on:** Tue, 26 February 2013, 04:48:04 »

http://www.ebay.com/itm/Dolch-PAC-62-Network-General-Sniffer-and-Analyzer-with-Dolch-Case-/261175924779 not the best, but not the worst either

Acetrak · « **Reply #1 on:** Tue, 26 February 2013, 06:17:23 »

Whoever is getting this should also ask if the seller can just ship the keyboard to reduce the price or at least reduce shipping rates

Mugen · « **Reply #2 on:** Tue, 26 February 2013, 08:05:12 »

This needs a moogle kit to fit a filco or something right?

Sai · « **Reply #3 on:** Tue, 26 February 2013, 08:08:43 »

Quote from: Mugen on Tue, 26 February 2013, 08:05:12

This needs a moogle kit to fit a filco or something right?

you. you are correct.

Mugen · « **Reply #4 on:** Tue, 26 February 2013, 08:15:47 »

precarious · « **Reply #5 on:** Tue, 26 February 2013, 09:45:02 »

Quote from: Mugen on Tue, 26 February 2013, 08:05:12

This needs a moogle kit to fit a filco or something right?

the keyboard itself is really nice though, just get a teensy and make a quick converter.

IvanIvanovich · « **Reply #6 on:** Tue, 26 February 2013, 10:00:00 »

It is a PS/2 keyboard, just change the cable no need to make a controller replacement.

precarious · « **Reply #7 on:** Tue, 26 February 2013, 10:55:10 »

Quote from: IvanIvanovich on Tue, 26 February 2013, 10:00:00

It is a PS/2 keyboard, just change the cable no need to make a controller replacement.

true, i guess i forgot about this while using it with a laptop with no ps/2 =(

Mugen · « **Reply #8 on:** Tue, 26 February 2013, 12:19:26 »

Quote from: precarious on Tue, 26 February 2013, 09:45:02

Quote from: Mugen on Tue, 26 February 2013, 08:05:12
This needs a moogle kit to fit a filco or something right?

the keyboard itself is really nice though, just get a teensy and make a quick converter.

What switches does it have?

Acetrak · « **Reply #9 on:** Tue, 26 February 2013, 12:21:19 »

PCB mounted MX Blue

Mugen · « **Reply #10 on:** Tue, 26 February 2013, 12:23:09 »

oooo nice, i wanted to maybe pick up a blue switch board, if it werent for the scratches on the shift and space bar i would have snatched it in a second >_<

SmallFry · « **Reply #11 on:** Tue, 26 February 2013, 12:25:11 »

Dat right shift. Ouch.

precarious · « **Reply #12 on:** Tue, 26 February 2013, 13:35:09 »

Quote from: SmallFry on Tue, 26 February 2013, 12:25:11

Dat right shift. Ouch.

short bus right shift is drooling

Binge · « **Reply #13 on:** Tue, 26 February 2013, 14:35:17 »

This is seriously revoltingly tempting and pay day is on Thursday >.< FUUUUUUUUUUUU rent!

precarious · « **Reply #14 on:** Tue, 26 February 2013, 17:06:26 »

Quote from: Binge on Tue, 26 February 2013, 14:35:17

This is seriously revoltingly tempting and pay day is on Thursday >.< FUUUUUUUUUUUU rent!

if it really is scratched up and not dirty, or whatever, don't sweat it too much, probably better to wait for one in better condition

Mugen · « **Reply #15 on:** Tue, 26 February 2013, 20:22:38 »

I contacted the seller to ask for additional pictures but he responded that somebody is already in the process of buying it. :\

Mugen · « **Reply #16 on:** Fri, 01 March 2013, 17:23:55 »

Does anybody know i can find a guide on how to change the cable?
Cheers,

IvanIvanovich · « **Reply #17 on:** Fri, 01 March 2013, 19:20:32 »

Easiest way, just cut the end of a PS/2 cable and crimp a 4p4c connector on the end, then you have a detachable PS/2 cable and don't really have to modify the keyboard at all. Otherwise, just open the casebody up take out the pcb desolder the wires that lead to the 4p4c connector and solder on PS/2 cable. There is really not much complexity there.

leesofi · « **Reply #18 on:** Fri, 01 March 2013, 19:24:16 »

i know but cant explan

precarious · « **Reply #19 on:** Fri, 01 March 2013, 20:15:20 »

like that, i picked up the line splitter at k-mart for a few bucks. those are some thick coiled cherry ps/2 cables, but you can use whatever

News:

Author Topic: Dolch - ebay BIN (Read 3369 times)