NEW USERS, READ THIS!
0 Members and 1 Guest are viewing this topic.
Did this require approval? Would explain why I got an email alert for it, but couldn't find the thread. Has happened in the past to me as well...time to head to the bug reports thread
Ooohh, more plates!
I can't buy these plates! They're backwards
Hell yes, in for a couple suits plates.And i just messed up my address....resubmitting..lol
Quote from: Turkishrambo on Wed, 13 March 2013, 20:39:18Hell yes, in for a couple suits plates.And i just messed up my address....resubmitting..lolThat's fine, I deleted your first order
Quote from: The_Beast on Wed, 13 March 2013, 20:50:41Quote from: Turkishrambo on Wed, 13 March 2013, 20:39:18Hell yes, in for a couple suits plates.And i just messed up my address....resubmitting..lolThat's fine, I deleted your first order hahah yeah i pressed tab and then enter by accident, not just enter. Derp.Thank you.
Can you still open the switch after installing this plate or not? If you can then I'm definitely in for one!
Yes, and I'll be modding the 2x switches so that you can open those as well
Quote from: GeorgeK on Wed, 13 March 2013, 21:24:35Can you still open the switch after installing this plate or not? If you can then I'm definitely in for one!Yes, and I'll be modding the 2x switches so that you can open those as well
is that your address in the google form? because I could pick them up (i go to school 10 min away) instead you shipping them, to lower the cost and save packing material.
Quote from: gnubag on Thu, 14 March 2013, 00:42:23is that your address in the google form? because I could pick them up (i go to school 10 min away) instead you shipping them, to lower the cost and save packing material.Sadly, I am not Tom Morellohttp://en.wikipedia.org/wiki/Tom_Morello
Quote from: The_Beast on Thu, 14 March 2013, 01:00:04Quote from: gnubag on Thu, 14 March 2013, 00:42:23is that your address in the google form? because I could pick them up (i go to school 10 min away) instead you shipping them, to lower the cost and save packing material.Quote from: The_Beast on Thu, 14 March 2013, 01:04:12Sadly, I am not Tom Morellohttp://en.wikipedia.org/wiki/Tom_MorelloROFL!!!Gotta give that man props. He melts minds with dat guitar
Quote from: gnubag on Thu, 14 March 2013, 00:42:23is that your address in the google form? because I could pick them up (i go to school 10 min away) instead you shipping them, to lower the cost and save packing material.Quote from: The_Beast on Thu, 14 March 2013, 01:04:12Sadly, I am not Tom Morellohttp://en.wikipedia.org/wiki/Tom_MorelloROFL!!!
Sadly, I am not Tom Morellohttp://en.wikipedia.org/wiki/Tom_Morello
Apologies beast, I realized I messed up on my address too. I got too excited and didn't read. Resubmitting order.
Quote from: The_Beast on Thu, 14 March 2013, 01:00:04Quote from: gnubag on Thu, 14 March 2013, 00:42:23is that your address in the google form? because I could pick them up (i go to school 10 min away) instead you shipping them, to lower the cost and save packing material.Sadly, I am not Tom Morellohttp://en.wikipedia.org/wiki/Tom_MorelloROFL!!!
Quote from: The_Beast on Thu, 14 March 2013, 01:00:04Quote from: gnubag on Thu, 14 March 2013, 00:42:23is that your address in the google form? because I could pick them up (i go to school 10 min away) instead you shipping them, to lower the cost and save packing material.Sadly, I am not Tom Morellohttp://en.wikipedia.org/wiki/Tom_Morelloare you sure?sad anyways. still ordered 2 plates.
Awesome - ordered I think I did the address right (although I have only just woken up so it could be entirely wrong...)Edit: Was that Tipro part of any use in the end?
Quote from: GeorgeK on Thu, 14 March 2013, 01:30:13Awesome - ordered I think I did the address right (although I have only just woken up so it could be entirely wrong...)Edit: Was that Tipro part of any use in the end?I haven't even tried it yet. Too busy with other stuff
Quote from: The_Beast on Thu, 14 March 2013, 01:43:24Quote from: GeorgeK on Thu, 14 March 2013, 01:30:13Awesome - ordered I think I did the address right (although I have only just woken up so it could be entirely wrong...)Edit: Was that Tipro part of any use in the end?I haven't even tried it yet. Too busy with other stuffFair enough - I know that feeling! I assume my order went through alright and the address is ok?
Cheers buddy What stabilisers do you need for these?
Quote from: GeorgeK on Thu, 14 March 2013, 02:13:59Cheers buddy What stabilisers do you need for these?You can use cherry PCB or plate mount. Costar can work, but you might have to sand the plate down a bit. Costar needs around 0.060" thickness and these plate will be around 0.0625"
Missing stabilizers. I don't know what the poker PCBs came with, but if they don't include diodes, you would need those too. Also, probably LEDs
Ordered two of the Poker suit plates. Slowly accumulating the parts to build my first keyboard...Is there a list somewhere detailing all the parts I should be looking out for? I figure I need the items below, am I missing some stuff?1. PCB2. Case3. Backing plate4. Key switches5. Key caps 6. USB cable (plus some way to connect to the board - USB connector for the case?)
Quote from: Greystoke on Thu, 14 March 2013, 07:53:16Ordered two of the Poker suit plates. Slowly accumulating the parts to build my first keyboard...Is there a list somewhere detailing all the parts I should be looking out for? I figure I need the items below, am I missing some stuff?1. PCB2. Case3. Backing plate4. Key switches5. Key caps6. USB cable (plus some way to connect to the board - USB connector for the case?)Quote from: metalliqaz on Thu, 14 March 2013, 07:56:50Missing stabilizers. I don't know what the poker PCBs came with, but if they don't include diodes, you would need those too. Also, probably LEDsPoker PCB has SMD diodes already installed. Unfortunately for you, now that the Poker DIY GB is over, and iMav sold all the leftover Poker PCBs, there is really no way to build a Poker from the ground up like that. You could either: 1. Buy a used Poker from someone and install your plate; or 2. Wait for the GH60 GB, and order the parts you need there.
Ordered two of the Poker suit plates. Slowly accumulating the parts to build my first keyboard...Is there a list somewhere detailing all the parts I should be looking out for? I figure I need the items below, am I missing some stuff?1. PCB2. Case3. Backing plate4. Key switches5. Key caps6. USB cable (plus some way to connect to the board - USB connector for the case?)
also i am interested where i might find plate mounted switches as well. is this site's classifieds the best place to look? i am looking to build a 60% with greens.
Do you have plans to run any other plate designs? I am working on a custom design but even your single unit prices seem to be much better than any I'm seeing.I am interested more in a larger layout similar to a tkl but with a numpad instead of arrows and scrolls keys. Possibly made of anodized aluminum.
Quote from: The_Beast on Thu, 14 March 2013, 02:26:24Quote from: GeorgeK on Thu, 14 March 2013, 02:13:59Cheers buddy What stabilisers do you need for these?You can use cherry PCB or plate mount. Costar can work, but you might have to sand the plate down a bit. Costar needs around 0.060" thickness and these plate will be around 0.0625"Fair enough - any idea where I can get plate mounted cherry stabilisers from? Just as my Poker's current PCB mount ones are not so great - the spacebar ones come out every time I remove the spacebar for example...
