Author Topic: [Closed] Stainless Steel Poker Plates - None Left (Read 17668 times)

badcop · « **Reply #50 on:** Thu, 14 March 2013, 12:14:12 »

Quote from: The_Beast on Thu, 14 March 2013, 11:42:39

Keep ordering ones with suits if you want them. I already sent in the order but I'm sure I can still add some. If you want to change your order, just resubmit the order and I will delete your first order completely

resubmitted the order for two reasons. I didn't notice the format in which you wanted the addresses and i changed my order from blank plates to suits.

thanks beast.

The_Beast · « **Reply #51 on:** Thu, 14 March 2013, 12:28:12 »

Quote from: badcop on Thu, 14 March 2013, 12:14:12

Quote from: The_Beast on Thu, 14 March 2013, 11:42:39
Keep ordering ones with suits if you want them. I already sent in the order but I'm sure I can still add some. If you want to change your order, just resubmit the order and I will delete your first order completely

resubmitted the order for two reasons. I didn't notice the format in which you wanted the addresses and i changed my order from blank plates to suits.

thanks beast.

Got it!

BTW, I added a link in the second post to check your order!

SmallFry · « **Reply #52 on:** Thu, 14 March 2013, 12:33:15 »

So... I can haz switch toolz?

The_Beast · « **Reply #53 on:** Thu, 14 March 2013, 12:40:05 »

Quote from: SmallFry on Thu, 14 March 2013, 12:33:15

So... I can haz switch toolz?

Once I test the lube station....

jdcarpe · « **Reply #54 on:** Thu, 14 March 2013, 12:40:44 »

I need to test it also...

Goodfella · « **Reply #55 on:** Thu, 14 March 2013, 12:46:12 »

This looks pretty cool! Unfortunately I think I am going to sell my Poker, I just never use it anymore, fell in love with the red switches on my QFR...

The_Beast · « **Reply #56 on:** Thu, 14 March 2013, 12:56:20 »

I'll be sending the final order in tomorrow and ordering 2 extra of each.

CaptainAsshat · « **Reply #57 on:** Thu, 14 March 2013, 13:02:07 »

Quote from: jdcarpe on Thu, 14 March 2013, 11:50:40

Quote from: CaptainAsshat on Thu, 14 March 2013, 11:39:47
Do you have plans to run any other plate designs? I am working on a custom design but even your single unit prices seem to be much better than any I'm seeing.

I am interested more in a larger layout similar to a tkl but with a numpad instead of arrows and scrolls keys. Possibly made of anodized aluminum.

I made what you're looking for already. Click on the Keyboard Prototyping link in my signature, and at the bottom of the 2nd post, there is an attachment called TK.dwg. That's what you want.

I am trying to have one made. I do not need a drawing, but thank you.

jdcarpe · « **Reply #58 on:** Thu, 14 March 2013, 13:06:29 »

Well, The_Beast needs drawing files to send the laser cutter in order to have them made. But I'm sorry to intrude, if you already had a drawing. Good luck with your project!

CaptainAsshat · « **Reply #59 on:** Thu, 14 March 2013, 13:09:53 »

Quote from: jdcarpe on Thu, 14 March 2013, 13:06:29

Well, The_Beast needs drawing files to send the laser cutter in order to have them made. But I'm sorry to intrude, if you already had a drawing. Good luck with your project!

I'm sorry I was under the impression that I was misunderstood, not that you were offering the files to beast. I didn't mean to be short, I am just at work. The origin of the files is not important to me. Apologies

jdcarpe · « **Reply #60 on:** Thu, 14 March 2013, 16:13:55 »

Quote from: CaptainAsshat on Thu, 14 March 2013, 13:09:53

Quote from: jdcarpe on Thu, 14 March 2013, 13:06:29
Well, The_Beast needs drawing files to send the laser cutter in order to have them made. But I'm sorry to intrude, if you already had a drawing. Good luck with your project!

I'm sorry I was under the impression that I was misunderstood, not that you were offering the files to beast. I didn't mean to be short, I am just at work. The origin of the files is not important to me. Apologies

No problem. I just didn't want you to have to duplicate effort, if you needed a plate drawing for the laser cutter to use. One thing you really need for that design is a custom case, since the size will be about 1-unit (0.75 inches) wider than current TKL designs. You can always make a temporary case out of cardboard.

You can use the "lowpoly" method linked in my Keyboard Prototyping thread to wire the switches directly to the (Teensy) controller. Alternately, you can design a PCB around that layout and have a prototype made in your design, to complement the plate.

Anyway, if you want to discuss new design ideas, we can take it to the thread I mentioned. Sorry for the threadcrapping, The_Beast!

The_Beast · « **Reply #61 on:** Thu, 14 March 2013, 23:22:24 »

Just a reminder, final order is going in in about 12 hours

do_Og@n · « **Reply #62 on:** Thu, 14 March 2013, 23:40:46 »

Are you going to send out invoices?

The_Beast · « **Reply #63 on:** Thu, 14 March 2013, 23:42:18 »

Quote from: do_Og@n on Thu, 14 March 2013, 23:40:46

Are you going to send out invoices?

Yea, sometime next week. But honestly it doesn't really matter as long as I get paid before shipping.

The_Beast · « **Reply #64 on:** Fri, 15 March 2013, 08:43:28 »

Bump, closing in 2 hours

turtle · « **Reply #65 on:** Fri, 15 March 2013, 10:01:21 »

in for 1 with suits.. Order submitted. Let me know if you didnt receive it. thank you!

The_Beast · « **Reply #66 on:** Fri, 15 March 2013, 10:48:53 »

Quote from: turtle on Fri, 15 March 2013, 10:01:21

in for 1 with suits.. Order submitted. Let me know if you didnt receive it. thank you!

Got it!

You can always check the status in post #2.

The_Beast · « **Reply #67 on:** Fri, 15 March 2013, 13:09:10 »

Closed and order sent with 2 extra of each plate

GeorgeK · « **Reply #68 on:** Fri, 15 March 2013, 13:15:54 »

Oooh exciting (well as exciting as the prospect of desoldering and resoldering 70 odd switches can be anyway...)

Thanks for this The_Beast!

The_Beast · « **Reply #69 on:** Fri, 15 March 2013, 13:33:42 »

Quote from: GeorgeK on Fri, 15 March 2013, 13:15:54

Oooh exciting (well as exciting as the prospect of desoldering and resoldering 70 odd switches can be anyway...)

Thanks for this The_Beast!

61, I've counted too many times

No problem. People have been asking for plates and I need a bit of scratch for other projects so..... (next will be lube station and switch tools)

turtle · « **Reply #70 on:** Fri, 15 March 2013, 13:48:46 »

Quote from: The_Beast on Fri, 15 March 2013, 10:48:53

Quote from: turtle on Fri, 15 March 2013, 10:01:21
in for 1 with suits.. Order submitted. Let me know if you didnt receive it. thank you!

Got it!

You can always check the status in post #2.

Sweet! Thanks!!!

boost · « **Reply #71 on:** Fri, 15 March 2013, 14:31:02 »

O_O I missed it...

esoomenona · « **Reply #72 on:** Fri, 15 March 2013, 14:31:41 »

^I have a round one for you.

The_Beast · « **Reply #73 on:** Fri, 15 March 2013, 14:32:19 »

Quote from: boost on Fri, 15 March 2013, 14:31:02

O_O I missed it...

I ordered 2 extra blanks and 2 extra suits, send me a PM and I'll add you. But I will not be adding anymore to my order with the cutter, these 4 are the only ones available

boost · « **Reply #74 on:** Fri, 15 March 2013, 14:37:25 »

Quote from: The_Beast on Fri, 15 March 2013, 14:32:19

Quote from: boost on Fri, 15 March 2013, 14:31:02
O_O I missed it...

I ordered 2 extra blanks and 2 extra suits, send me a PM and I'll add you. But I will not be adding anymore to my order with the cutter, these 4 are the only ones available

PM'ed

do_Og@n · « **Reply #75 on:** Fri, 15 March 2013, 20:19:48 »

Have you already sent out the invoices?

The_Beast · « **Reply #76 on:** Fri, 15 March 2013, 20:33:29 »

Quote from: do_Og@n on Fri, 15 March 2013, 20:19:48

Have you already sent out the invoices?

Nope

Check your order status here!

SmallFry · « **Reply #77 on:** Sat, 16 March 2013, 13:28:02 »

Nice and quick. (INB4TWSS) Nice GB Beast!

The_Beast · « **Reply #78 on:** Sat, 16 March 2013, 17:59:20 »

Quote from: SmallFry on Sat, 16 March 2013, 13:28:02

Nice and quick. (INB4TWSS) Nice GB Beast!

Not technically a GB since I'm buying up front. However, I can see myself doing these mini "group buys" more often. They're smaller (less shipping for me to deal with), faster (good for everyone), smoother running (not nearly as many PM's asking questions) and I make a bit of money (since this isn't a GB, I think that's fair especially when I'm fronting the money to order)

I think this is how the lube station and switch tool buy is going to go since it's sooooo much smoother and easier for me

BTW I still have one with suits and 2 blank plates. If anyone wants them, pm me

Gupgup · « **Reply #79 on:** Sat, 16 March 2013, 18:03:38 »

Quote from: The_Beast on Sat, 16 March 2013, 17:59:20

Quote from: SmallFry on Sat, 16 March 2013, 13:28:02
Nice and quick. (INB4TWSS) Nice GB Beast!

Not technically a GB since I'm buying up front. However, I can see myself doing these mini "group buys" more often. They're smaller (less shipping for me to deal with), faster (good for everyone), smoother running (not nearly as many PM's asking questions) and I make a bit of money (since this isn't a GB, I think that's fair especially when I'm fronting the money to order)

I think this is how the lube station and switch tool buy is going to go since it's sooooo much smoother and easier for me

BTW I still have one with suits and 2 blank plates. If anyone wants them, pm me

How is the lube station situation looking? I'm in desperate need of one

The_Beast · « **Reply #80 on:** Sat, 16 March 2013, 18:06:09 »

Quote from: Gupgup on Sat, 16 March 2013, 18:03:38

Quote from: The_Beast on Sat, 16 March 2013, 17:59:20
Quote from: SmallFry on Sat, 16 March 2013, 13:28:02
Nice and quick. (INB4TWSS) Nice GB Beast!

Not technically a GB since I'm buying up front. However, I can see myself doing these mini "group buys" more often. They're smaller (less shipping for me to deal with), faster (good for everyone), smoother running (not nearly as many PM's asking questions) and I make a bit of money (since this isn't a GB, I think that's fair especially when I'm fronting the money to order)

I think this is how the lube station and switch tool buy is going to go since it's sooooo much smoother and easier for me

BTW I still have one with suits and 2 blank plates. If anyone wants them, pm me

How is the lube station situation looking? I'm in desperate need of one

With this poker plate order, I sent in a single station to be cut. I want to make sure that the way I have the stem cutouts is correct before ordering a bunch.

Gupgup · « **Reply #81 on:** Sat, 16 March 2013, 19:19:54 »

Awesome, great to hear! If it is correct, go ahead and just send that station with my poker plate

jdcarpe · « **Reply #82 on:** Sat, 16 March 2013, 20:16:18 »

Too late. He's sending it to me along with my order.

The_Beast · « **Reply #83 on:** Sun, 17 March 2013, 18:14:04 »

Quote from: jdcarpe on Sat, 16 March 2013, 20:16:18

Too late. He's sending it to me along with my order.

Maybe

(It'll be there)

BTW I still have ~~one with suits and~~ 2 blank plates. If anyone wants them, pm me

Neal · « **Reply #84 on:** Sun, 17 March 2013, 19:10:28 »

Took a blank one, nice.

emusan · « **Reply #85 on:** Sun, 17 March 2013, 19:12:32 »

managed to get in!!

yayz ^_^ The_Beast is awesome!!

The_Beast · « **Reply #86 on:** Sun, 17 March 2013, 19:25:22 »

Single blank plate left! ^^ Thanks for ordering guys ^___^

The_Beast · « **Reply #87 on:** Wed, 20 March 2013, 00:11:08 »

Been busy this week but should have a break on Thursday to do domestic invoices, international on Friday. I'll be picking up the plate sometime next week and shipping shorty after that

BTW I still have a single blank plate for sale!

CommunistWitchDr · « **Reply #88 on:** Wed, 20 March 2013, 00:33:53 »

Quote from: The_Beast on Fri, 15 March 2013, 13:33:42

No problem. People have been asking for plates and I need a bit of scratch for other projects so..... (next will be lube station and switch tools)

If switch tools means what I think it does this is gonna be great.

tricheboars · « **Reply #89 on:** Wed, 20 March 2013, 01:51:56 »

my wallet is at the ready.

duq · « **Reply #90 on:** Wed, 20 March 2013, 02:05:11 »

dibs on the single plate left. still avail?

The_Beast · « **Reply #91 on:** Wed, 20 March 2013, 10:36:30 »

All gone!

Invoicing soon, thanks again folks!

tricheboars · « **Reply #92 on:** Wed, 20 March 2013, 11:40:30 »

super stoked about this little dude. thanks beast. lovin the check your order link.

badcop · « **Reply #93 on:** Thu, 21 March 2013, 10:37:26 »

payment sent!

Tarzan · « **Reply #94 on:** Thu, 21 March 2013, 10:44:26 »

Payment sent

The_Beast · « **Reply #95 on:** Thu, 21 March 2013, 10:46:27 »

All invoices sent to CONUS buyers. I'll do international invoices later tonight or tomorrow

Also, thanks for paying guys

!

tricheboars · « **Reply #96 on:** Thu, 21 March 2013, 12:45:22 »

Payment sent.

This was perfect timing for the GH60 Group Buy. Suits Suits Suits! My custom will have a bit more flair now.

gnubag · « **Reply #97 on:** Thu, 21 March 2013, 12:47:51 »

is there anybody who still needs 2 plates?

i maybe have to back off because of school/financial issues.

duq · « **Reply #98 on:** Thu, 21 March 2013, 13:50:30 »

Paid.

badcop · « **Reply #99 on:** Thu, 21 March 2013, 13:59:03 »

beast - do you know if this plate will work with the GH60? i'm assuming so?

News:

Author Topic: [Closed] Stainless Steel Poker Plates - None Left (Read 17668 times)