Author Topic: [Closed] Stainless Steel Poker Plates - None Left (Read 17669 times)

jdcarpe · « **Reply #100 on:** Thu, 21 March 2013, 14:00:34 »

It will.

The_Beast · « **Reply #101 on:** Thu, 21 March 2013, 14:00:55 »

Quote from: badcop on Thu, 21 March 2013, 13:59:03

beast - do you know if this plate will work with the GH60? i'm assuming so?

Should. Not giving any promises tho

jdcarpe · « **Reply #102 on:** Thu, 21 March 2013, 14:04:46 »

Quote from: The_Beast on Thu, 21 March 2013, 14:00:55

Quote from: badcop on Thu, 21 March 2013, 13:59:03
beast - do you know if this plate will work with the GH60? i'm assuming so?

Should. Not giving any promises tho

I promise it will, though.

The_Beast · « **Reply #103 on:** Sat, 23 March 2013, 21:15:21 »

All international invoices have been sent. There was one that was less than $18 because they were in Canada and one that was more but that was because it was 2 plates vs the one plate order that I estimated shipping with.

Also, someone dropped their order and have I have a single blank plate to buy

cenqsc · « **Reply #104 on:** Sun, 24 March 2013, 01:40:10 »

Quote from: The_Beast on Sat, 23 March 2013, 21:15:21

Also, someone dropped their order and have I have a single blank plate to buy

i would take it

The_Beast · « **Reply #105 on:** Sun, 24 March 2013, 01:48:30 »

Quote from: cenqsc on Sun, 24 March 2013, 01:40:10

Quote from: The_Beast on Sat, 23 March 2013, 21:15:21
Also, someone dropped their order and have I have a single blank plate to buy

i would take it

PM me your address and PP email

Neal · « **Reply #106 on:** Sun, 24 March 2013, 10:01:41 »

eon · « **Reply #107 on:** Sun, 24 March 2013, 10:19:22 »

Also paid!

@The_Beast: please ignore the PayPal shipping address, the one I gave in the order form is the right address. Thanks

The_Beast · « **Reply #108 on:** Sun, 24 March 2013, 10:38:54 »

Quote from: eon on Sun, 24 March 2013, 10:19:22

Also paid!

@The_Beast: please ignore the PayPal shipping address, the one I gave in the order form is the right address. Thanks

I'll be shipping to the address you gave me on the order form. I also copy and pasted what you had on the order form to the notes section of the invoice if you want to double check.

eon · « **Reply #109 on:** Sun, 24 March 2013, 11:52:32 »

Yep, that's fine, thanks!

Turkishrambo · « **Reply #110 on:** Sun, 24 March 2013, 11:55:03 »

Beast, i will be paying monday at midnight when my bills get processed, Thanks

The_Beast · « **Reply #111 on:** Sun, 24 March 2013, 19:50:44 »

Quote from: Turkishrambo on Sun, 24 March 2013, 11:55:03

Beast, i will be paying monday at midnight when my bills get processed, Thanks

That's fine, I don't care when you pay just as long as you pay for your order (so I'm not left with too many left over plates)

The_Beast · « **Reply #112 on:** Mon, 25 March 2013, 11:01:07 »

My laser guy had a death in the family and was out of the office for a while. So plates are delayed but they should be done on Thursday. I have a test in Friday and visiting family that weekend. So they'll ship that Thursday or sometime during the first week of April.

Sorry about the small delay in shipping

jdcarpe · « **Reply #113 on:** Mon, 25 March 2013, 12:02:19 »

Thank you for the update. My condolences to the family.

The_Beast · « **Reply #114 on:** Mon, 25 March 2013, 12:19:32 »

Quote from: jdcarpe on Mon, 25 March 2013, 12:02:19

Thank you for the update. My condolences to the family.

It was his wife's grandfather, not super close family but he still needed to be out of the office. BTW I don't know if he'll bend those plates. I have a metals professor who will let me use a box and pan break so it I should still be able to bend those things

jdcarpe · « **Reply #115 on:** Mon, 25 March 2013, 12:51:25 »

Quote from: The_Beast on Mon, 25 March 2013, 12:19:32

Quote from: jdcarpe on Mon, 25 March 2013, 12:02:19
Thank you for the update. My condolences to the family.

It was his wife's grandfather, not super close family but he still needed to be out of the office. BTW I don't know if he'll bend those plates. I have a metals professor who will let me use a box and pan break so it I should still be able to bend those things

However the plates get bent is fine with me. I appreciate you doing it for me.

duq · « **Reply #116 on:** Mon, 25 March 2013, 12:59:01 »

What is this bent talk going on about!?

The_Beast · « **Reply #117 on:** Mon, 25 March 2013, 13:00:30 »

Quote from: duq on Mon, 25 March 2013, 12:59:01

What is this bent talk going on about!?

some custom plates and a lube station

jdcarpe · « **Reply #118 on:** Mon, 25 March 2013, 13:25:59 »

Quote from: The_Beast on Mon, 25 March 2013, 13:00:30

Quote from: duq on Mon, 25 March 2013, 12:59:01
What is this bent talk going on about!?

some custom plates and a lube station

Which is the reason I am the only one who hasn't been invoiced yet. The_Beast has been helping me get some custom plate designs made, and it's been a great help to me.

duq · « **Reply #119 on:** Mon, 25 March 2013, 16:13:16 »

Cool JW.

do_Og@n · « **Reply #120 on:** Tue, 26 March 2013, 22:05:42 »

Invoice received and paid. Thanks again for all your work on this.

Turkishrambo · « **Reply #121 on:** Thu, 28 March 2013, 20:23:06 »

sorry for not paying yet. Paying tonight ASAP. sorry beast <3

The_Beast · « **Reply #122 on:** Fri, 29 March 2013, 00:38:46 »

Yo boost! Pay up or the knee breakers will be headed your way!

Single blank plate still up for sale! I'll be shipping asap, gotta do family stuff this weekend

Neal · « **Reply #123 on:** Fri, 29 March 2013, 11:37:28 »

Take it easy (but ship mine first. *cough*)

Just kidding.

)

tricheboars · « **Reply #124 on:** Fri, 29 March 2013, 12:33:39 »

exciting stuff. no rush on my order beast. if others want their faster let 'em. i got this for the GH60 so... yea. super stoked about the plates and compatibility with Cherry and costar stabs. genius.

next project perhaps could be iso style?

The_Beast · « **Reply #125 on:** Fri, 29 March 2013, 18:01:32 »

Quote from: tricheboars on Fri, 29 March 2013, 12:33:39

exciting stuff. no rush on my order beast. if others want their faster let 'em. i got this for the GH60 so... yea. super stoked about the plates and compatibility with Cherry and costar stabs. genius.

next project perhaps could be iso style?

I'll be doing my own GH60 plates. I don't know what layouts I want tho...

It's a bit more since I'm doing small orders, but then I know they're right (WFD's last plates didn't turn out all that great)

samwisekoi · « **Reply #126 on:** Fri, 29 March 2013, 18:23:41 »

Quote from: The_Beast on Wed, 13 March 2013, 14:18:33

Blank - $25 - 1 Left
Show Image

I will take the last one if it is still available.

- Ron | samwisekoi

The_Beast · « **Reply #127 on:** Fri, 29 March 2013, 18:34:35 »

Quote from: samwisekoi on Fri, 29 March 2013, 18:23:41

Quote from: The_Beast on Wed, 13 March 2013, 14:18:33
Blank - $25 - 1 Left
Show Image

I will take the last one if it is still available.

- Ron | samwisekoi
Show Image

You got it! I'll pack it with your other plate and invoice you when I get my invoice

samwisekoi · « **Reply #128 on:** Fri, 29 March 2013, 18:52:12 »

TYVM!

- Ron | samwisekoi

tricheboars · « **Reply #129 on:** Sat, 30 March 2013, 01:56:04 »

Quote from: The_Beast on Fri, 29 March 2013, 18:01:32

Quote from: tricheboars on Fri, 29 March 2013, 12:33:39
exciting stuff. no rush on my order beast. if others want their faster let 'em. i got this for the GH60 so... yea. super stoked about the plates and compatibility with Cherry and costar stabs. genius.

next project perhaps could be iso style?

I'll be doing my own GH60 plates. I don't know what layouts I want tho...

It's a bit more since I'm doing small orders, but then I know they're right (WFD's last plates didn't turn out all that great)

oh snap!

i dont know what i want for the gh60 either. maybe iso or something interesting. i really like the poker layout and i think the function layer is great. i would swap ctrl and caps clock because caps lock sucks fat ****. i hate the caps lock, it should never have such good real estate. i need a full size backspace for sure and other than that i am flexible.

Turkishrambo · « **Reply #130 on:** Sat, 30 March 2013, 08:09:35 »

PAID!! XD

The_Beast · « **Reply #131 on:** Tue, 02 April 2013, 10:29:38 »

Sorry for not updating. Anyways, like I said, the laser guy had a death in the family. I thought I would have plates Monday, but it got pushed to Friday. Anyways, I had the test that Friday and met with family for Easter so that ate my weekend. I'll try to ship everything by this Friday. I should have CONUS by Thursday and International by Friday (I don't have any customs forms ATM)

Thanks for understanding

The_Beast · « **Reply #132 on:** Thu, 04 April 2013, 12:04:16 »

All domestic orders shipped 'cept jd, but he knows why

International will be tomorrow since I didn't have customs forms until just now. Thanks again guys

Acetrak · « **Reply #133 on:** Thu, 04 April 2013, 12:10:20 »

Where did your images of the plates go Beast??

The_Beast · « **Reply #134 on:** Thu, 04 April 2013, 12:12:01 »

Quote from: Acetrak on Thu, 04 April 2013, 12:10:20

Where did your images of the plates go Beast??

Cleaned up my imgur. Did you need them?

Acetrak · « **Reply #135 on:** Thu, 04 April 2013, 12:19:07 »

Doing some doodling in SW, wanted to make sure I will get the standoffs right...I'll hit you up later though

jdcarpe · « **Reply #136 on:** Thu, 04 April 2013, 12:34:48 »

The screw holes in The_Beast's plate files are not centered to the standoffs. They work just fine in practice, because the holes are much larger then they need to be. But don't base your standoff positions on those holes.

badcop · « **Reply #137 on:** Sat, 06 April 2013, 13:01:19 »

beast,

got my plates today. everything looks good.

THANKS

Tarzan · « **Reply #138 on:** Sat, 06 April 2013, 13:16:00 »

Got my plates as well. They look awesome.

Thanks!

eyesmiles · « **Reply #139 on:** Sat, 06 April 2013, 14:01:47 »

My plate came in today. Thank you beast!

Gupgup · « **Reply #140 on:** Sat, 06 April 2013, 16:08:16 »

Got mine! Thanks!

Gupgup

emusan · « **Reply #141 on:** Sat, 06 April 2013, 16:26:46 »

Mine just came in

thanks a bunch!! Now just to get that gh60 custom pcb >.>

tricheboars · « **Reply #142 on:** Sat, 06 April 2013, 19:33:54 »

got mine today. looks good. has a slight bend to it but i will straighten it out somehow when the time comes.

thank you. would buy again.

The_Beast · « **Reply #143 on:** Sat, 06 April 2013, 19:38:22 »

Quote from: tricheboars on Sat, 06 April 2013, 19:33:54

got mine today. looks good. has a slight bend to it but i will straighten it out somehow when the time comes.

thank you. would buy again.

They all do. When they take the burrs off, the sanding machine adds a slight bend. 2 minutes and a table should be able to bend it straight again.

do_Og@n · « **Reply #144 on:** Sat, 06 April 2013, 20:08:20 »

I received mine today....now I just need the pcb for one.

Tarzan · « **Reply #145 on:** Sat, 06 April 2013, 20:18:51 »

Quote from: do_Og@n on Sat, 06 April 2013, 20:08:20

I received mine today....now I just need the pcb for one.

Same here. And the case. And the switches. And the keycaps (okay, I probably have those...).

Basically everything. This is the first Poker-related item I've owned.

)

do_Og@n · « **Reply #146 on:** Sat, 06 April 2013, 21:06:37 »

Quote from: Greystoke on Sat, 06 April 2013, 20:18:51

Quote from: do_Og@n on Sat, 06 April 2013, 20:08:20
I received mine today....now I just need the pcb for one.

Same here. And the case. And the switches. And the keycaps (okay, I probably have those...).

Basically everything. This is the first Poker-related item I've owned.

)

I have some PCB mount MX Clears I am willing to trade for a PCB. [Now I cross my fingers]

jdcarpe · « **Reply #147 on:** Sat, 06 April 2013, 22:52:34 »

Quote from: do_Og@n on Sat, 06 April 2013, 21:06:37

Quote from: Greystoke on Sat, 06 April 2013, 20:18:51
Quote from: do_Og@n on Sat, 06 April 2013, 20:08:20
I received mine today....now I just need the pcb for one.

Same here. And the case. And the switches. And the keycaps (okay, I probably have those...).

Basically everything. This is the first Poker-related item I've owned.

)

I have some PCB mount MX Clears I am willing to trade for a PCB. [Now I cross my fingers]

How many are we talking?

do_Og@n · « **Reply #148 on:** Sun, 07 April 2013, 00:28:59 »

Quote from: jdcarpe on Sat, 06 April 2013, 22:52:34

Quote from: do_Og@n on Sat, 06 April 2013, 21:06:37
Quote from: Greystoke on Sat, 06 April 2013, 20:18:51
Quote from: do_Og@n on Sat, 06 April 2013, 20:08:20
I received mine today....now I just need the pcb for one.

Same here. And the case. And the switches. And the keycaps (okay, I probably have those...).

Basically everything. This is the first Poker-related item I've owned.

)

I have some PCB mount MX Clears I am willing to trade for a PCB. [Now I cross my fingers]

How many are we talking?

I have over 300....but I am willing to trade around 40 for a Poker PCB.

turtle · « **Reply #149 on:** Tue, 09 April 2013, 16:24:29 »

Thanks beast. Plate received.

News:

Author Topic: [Closed] Stainless Steel Poker Plates - None Left (Read 17669 times)